arrHitInfo=new Array("#1,60,6,91,1,102,8","#10,6,1,51,2,61,1,94,2,102,1,103,1,101,1,104,1,105,1,108,1,106,1","#11,6,1,52,3,61,1","#12,6,1,55,3,61,1","#12-10,22,2","#13,6,1,53,3,61,1","#14,6,1,54,1,61,1","#15,6,1,57,2,61,1","#16,6,1,56,3,61,1","#16-14,22,2","#2,60,6,102,7","#22-18,22,1","#24,6,1","#251416-2,67,1,60,1,62,1,63,1,64,1,65,1,66,1","#252182,67,1,60,1,62,1,63,1,64,1,65,1,66,1","#252184,67,1,60,1,62,1,63,1,64,1,65,1,66,1","#26,44,1","#3,114,2","#31,6,1,48,1","#32,6,1,47,1","#33,6,1,49,2","#34,6,1,40,1,48,1,39,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,2","#6,118,1","#60,6,1,58,1,61,1","#8,22,1,113,1","#8-10,22,3","#e20,40,1,48,1,39,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1","#e20-3,6,1","#e20-6,6,1","#e21,6,1","#e23,6,1","#e24,42,1","#e25,6,1","#e26,6,1,44,1","#e28,6,1","#mp101,6,1","&#132,70,10","&#150,9,2","&#x2264,67,1,60,1,62,1,63,1,64,1,65,1,68,6,69,4,70,8","&deg,16,1,60,1","&gt,71,1,68,6,69,3,70,7,72,1","&ldquo,57,3,54,1","&lt,15,2,67,4,60,4,62,10,63,3,64,3,65,3,66,2,68,2,69,3,70,2","&micro,67,7,60,4,62,4,63,11,64,4,65,5,68,1,70,2","&ordm,90,2,93,2","&plusmn,12,3,13,2,16,5,17,1,67,4,60,4,62,4,63,4,64,4,65,4,66,7,68,3,69,2,70,4,79,1,87,2,96,4,95,4","&temperature,121,1","±.25ºf,94,1","±0.01,94,2","±0.01ma,94,1","±0.01mv,94,1","±0.01v,94,1","±0.04°,92,1","±0.06,94,2","±0.1°c,92,1,94,1","±0.2°c,92,1,94,1","±0.25,92,2,94,2,121,1","±0.25°c,92,1,94,1","±0.3°c,92,1,94,1","±0.5,92,1,121,3,123,1","±0.5°c,92,1,94,1","±1,92,1,94,1","±100mv,124,1","±10vdc,124,1","±2,121,4,123,4","±20,121,1","±20ma,124,1","±5,121,1,123,1","±50µm,106,1","®l,92,1","°c,92,2,94,6,101,3,102,3,103,3,104,3,106,3,107,8,105,2,108,3,109,2,110,1,111,10,113,1,124,2","°f,94,4,101,2,102,2,103,2,104,2,106,2,107,2,105,1,108,3,109,2,110,1,111,2,113,1,119,3,124,4","µf,114,2","µm,101,12,102,4,103,8,104,8,106,4,107,2,105,6,109,2,110,1,111,2,113,1","µs,108,1","µsec,106,2","·0,111,2","·10,111,1","·20,111,1","·4,111,1","·gradient,111,1","·manufacturer,111,1","·measuring,111,1","·offset,111,1","·status,111,1","0­,92,1","0.0,121,2,123,2","0.00,125,1","0.00004,67,1,63,1,101,1","0.00008,60,1,62,2,63,2,64,2,65,1,103,1,101,1,104,1","0.0001,66,1,108,1","0.00015,60,1,63,1,64,1,65,1","0.0002,62,1,63,1,64,1,103,1,101,1,104,1","0.0004,63,1,101,1","0.0008,63,1,101,1","0.001,67,2,60,1,62,1,63,2,64,1,65,1,66,1,68,1,69,1,70,2,103,2,101,3,102,2,104,2,105,2,107,2,108,1,106,2,109,2,110,1,111,2,113,2,114,1","0.0015,60,1,102,1","0.002,62,1,63,2,64,1,66,1,103,1,101,2,108,1","0.0025,108,1","0.0025mm,66,1","0.00385,92,1","0.004,60,1,63,1,69,1,101,1,102,1,108,1","0.005,62,1,63,1,64,1,71,1,72,1,103,1,101,1,107,1,109,1,110,1,111,1,113,1","0.005mm,69,1,70,1","0.01,67,2,60,1,62,2,63,2,64,1,65,1,70,1,92,1,103,2,101,3,102,2,104,2,105,2,107,1,106,2,109,1,111,1,113,1,114,1","0.01ma,124,1","0.02,60,1,63,2,64,1,65,1,66,1,68,1,69,1,70,2,72,1,101,1,107,2,108,1,109,2,110,1,111,2,113,2,114,1","0.025,60,1,102,1","0.02ma,124,1","0.03,71,1,94,1,105,1,110,1","0.04,94,1,107,2","0.04°,94,1","0.05,63,1,94,1,101,1,105,1,108,1,124,3","0.05&ordm,85,1,81,1,82,1,83,1,84,1,86,1","0.05mm,66,1","0.05ºc,114,1","0.06,94,2","0.07,94,1,103,1,101,1,102,1,104,1,108,1","0.075,105,1,110,1,113,1","0.08,107,4,106,1,109,2,110,1,113,1","0.09,94,2","0.1,67,1,60,3,62,1,63,2,64,1,65,1,66,1,70,1,94,1,103,3,101,2,102,5,104,1,105,1,107,1,108,2,106,2,109,2,111,1,113,1,114,1,121,2,123,2","0.1&deg,12,2,13,2,16,1","0.1&ordm,85,1,81,1,82,1,83,1,84,1,86,1","0.1°,124,1","0.1°c,124,1","0.10,16,1,94,3,101,1,104,1,105,1","0.11,94,2","0.12,107,4,110,1,113,2","0.125,111,3","0.12in,110,1","0.13,75,3,94,1,111,1","0.14,65,1,94,1,105,1","0.15,94,2","0.15°c,94,1","0.16,94,3,111,1","0.17,107,1,110,1,111,3,113,1","0.18,94,2,107,1","0.19,94,1","0.197,111,1","0.1mm,60,1","0.1ºf,114,1","0.2,70,2,103,1,107,1,111,3,124,2","0.21,65,1,94,1,103,1,101,1,102,1,104,1,105,1,107,1,106,1,109,1,113,1","0.213,110,1,113,1","0.215,121,1","0.21in,105,1","0.22,94,1","0.24,94,1,107,1,109,4,110,1,113,1","0.25,94,2,96,1,95,1,106,1,123,1","0.25a,91,1","0.26,94,1","0.27,94,1,111,2","0.28,94,1,114,1","0.2g,92,1,94,1","0.3,75,1,92,1,94,1,109,4,111,4","0.30,94,2","0.306,121,1","0.31,75,3,107,1,111,1","0.34,94,1,111,1","0.35,107,3,109,2,111,2","0.36,94,1,107,1,109,1,110,2,113,2","0.37,103,1,101,1,102,1,104,1","0.38,75,2","0.39,94,2,103,1,101,1,102,1,105,1,108,1,106,2,111,2","0.394,104,1","0.3c&deg,13,1","0.4,107,1,109,5,111,2","0.40,94,1","0.41,94,1,111,1","0.412,121,1","0.42,94,1","0.43,65,1,75,1,105,1,107,4,110,3,113,3","0.440,121,1","0.45,94,1","0.46,107,2,109,2,111,2","0.47,103,1,101,2,102,2,104,1,105,1,108,2,106,1,107,2,109,2,111,4","0.48,94,2","0.49,107,2","0.4kg,124,2","0.5,63,1,65,1,70,2,77,1,92,1,94,3,96,2,95,2,103,1,101,1,102,2,104,1,105,2,107,8,111,1,119,6,123,3","0.50a,91,1","0.51,103,2,111,1","0.53,75,4,107,2,110,1,111,3,113,1","0.55,94,1,107,3,110,1,111,2,113,1","0.56,75,2,92,1,94,1,109,1,111,1","0.57,103,1,101,1,102,1,104,1,105,1,108,1,106,1,107,9,109,1,110,2,113,2","0.59,107,2,109,2,111,2","0.5c&deg,12,1","0.5f&deg,13,1","0.5ms,60,1,62,1,64,1","0.5t,60,1","0.6,105,1,107,2,109,4,111,3","0.61,94,1","0.63,75,1,106,2","0.64,65,1,94,1,105,1","0.67,106,1","0.68,94,2","0.69,75,1,111,2","0.7,103,1,101,1,102,1,104,2,105,1,108,1,106,3,109,1,110,1,113,1","0.70,105,1,111,1","0.71,94,1","0.75,75,1,94,2,105,1,106,1,107,4","0.77,105,1,107,3,110,1,113,2","0.79,107,2,110,1,113,1","0.8,75,2,104,1,107,4,109,9,111,4","0.81,107,3,111,1","0.86,94,1,103,1,101,1,102,1","0.87,103,1","0.88,94,1","0.94,107,1,111,3","0.95,16,1,75,1,107,2","0.97,107,1,111,1","0.98,101,2,102,4,103,2,104,2,105,2,108,2,106,2,110,1,113,1","0.99,94,2","0°,92,1","0°c,94,3","0°f,94,2","00,63,1,79,2,101,1","000,7,1,17,1,60,1,62,1,63,1,66,1,89,1,90,1,96,1,95,1,101,3,102,2,103,2,104,2,105,2,108,2,106,2,118,1,121,3,123,3","0001,60,1,102,1","000psi,66,1","0010,60,1,102,1","001dia,121,1","002,7,1","002.0,66,1,68,1,69,1,70,1","003,14,1,18,1","00385,94,1","004,21,2,110,1,113,1","004.00,10,1","005,14,1,18,1,21,2,76,1","0050-1500mm,69,1","0050-2500mm,70,1","0050-3000mm,68,1","0050-7620mm,66,1","0050u,69,1","006,14,1,18,1,110,1,113,1","0063,21,1","009,110,1,113,1","00am-5,23,1","00pm,23,1","01,63,1,94,1,101,3,102,2,103,3,108,2,117,4,119,8","010,14,1,18,1","0-10,71,1,110,2,123,1","0­10,92,1","0100,60,1,102,1","0­100,92,1","01-015050-000,114,1","01-016050-000,114,1","01-016051-000,114,1","01-017000-000,82,1,114,1","01-017002-000,82,1,114,1","01-017021-000,82,1,114,1","01-017023-000,82,1,114,1","01-017052-000,82,1","01-017100-000,81,1,114,1","01-017102-000,81,1,114,1","01-017121-000,81,1,114,1","01-017123-000,81,1,114,1","01-017152-000,81,1","01-017200-000,83,1,114,1","01-017202-000,83,1,114,1","01-017221-000,83,1,114,1","01-017223-000,83,1,114,1","01-017300-000,85,1,114,1","01-017302-000,85,1,114,1","01-017321-000,85,1,114,1","01-017323-000,85,1,114,1","01-017800-000,84,1,114,1","01-017802-000,84,1,114,1","01-017821-000,84,1,114,1","01-017823-000,84,1,114,1","01-018000-000,86,1,114,1","01-018002-000,86,1,114,1","01-018002-021,86,1,114,1","01-018021-000,86,1,114,1","01-018023-000,86,1,114,1","01-018023-007,86,1,114,1","01-018052-000,86,1","01-047002-000,82,1","01-047023-000,82,1","01-047102-000,81,1","01-048002-000,86,1","01-048023-000,86,1","0-10vdc,96,1,95,1","01-180020-029,86,1,114,1","012,110,1,113,1","0120m,67,1,60,1,62,1,63,1,64,1,65,1,66,1","0125m,69,1","0125u,67,1,60,1,62,1,63,1,64,1,65,1,66,1","0-12vdc,124,1","0-1400°f,94,1","015,76,1,110,1,113,1","01721,118,1,114,1,117,1,119,1","018,110,1,113,1","01-982122-xxx,114,1","01-982123-xxx,114,1","01-990010-xxx,114,1","01-990030-00x,114,1","01-990040-000,114,1","01-990050-000,114,1","01-990061-0xx,114,1","01-990062-0xx,114,1","01-990080-001,114,1","01-990080-002,114,1","01-99011x-xxx,114,1","01-990130-00x,114,1","01-990140-xxx,114,1","01-9902x-xxx,114,1","02,67,2,63,1,64,1,101,1,103,1,104,1,105,2,106,2,118,1,114,1,119,1","02-05,65,1","0-20ma,94,2","0­20ma,92,1","021,110,1,113,1","02-11,107,11,109,9,111,9","02-15,62,1,65,1","024,110,1,113,1","025,76,1","0-25mv,94,1","0­25mv,92,1","03,100,1,105,1","030,110,1,113,1","0-30,96,1,95,1,121,1,123,1","031.00,10,1","0-3500,96,1,95,1,121,1,123,1","036,21,1,110,1,113,1","04,114,1","042,110,1,113,1","045.00,97,2","048,110,1,113,1","05,67,1,20,1,63,1,92,1,101,1,105,1,106,1","0-5,94,1,96,1,95,1,97,1","050,76,1","0-500,96,2,95,2,121,2,123,2","0-5000,96,1,95,1,121,1,123,1","05-06,113,1","0-50mv,94,1","054,110,1,113,1","0-5vdc,94,1","060,100,2,110,1,113,1","060.0,69,1","0600u,69,1","07,118,1","07-067000-000,87,1","07-067100-000,87,1","07-067100-001,87,1","07-067121-000,87,1","07-067300-000,87,1","07-067321-000,87,1","07-068021-000,87,1","08,113,1","08-02,8,1,118,8","08-020261,90,4","08-023384,90,4","08-023384-463,90,1","08-033024,90,4","08-033024-019,90,1","08-033024-032,90,1","08-033024-106,90,1","086.00,95,1","09,117,1,119,1","09-06,110,1","0-95,124,2","097.00,20,1","099.00,10,1","0ºc,114,1","0v,105,2,110,1","1&deg,12,1,13,1","1&divide,66,1","1&micro,67,1","1&ordm,87,1","1.0,60,3,62,1,64,1,75,1,101,1,102,3,103,2,104,1,119,3,121,2,123,2","1.00,16,1,22,1,105,1","1.04,107,2,109,2,111,2","1.06,107,2,110,1,111,1,123,2","1.060,121,1","1.08,94,1","1.09,94,1","1.1,75,1,94,2,101,2,102,3,103,3,104,3,108,1,106,2,107,6,109,4,110,1,113,2","1.10,22,1,101,1,105,2","1.10.21,114,2","1.2,75,1,92,1,94,3,101,1,107,1,109,1","1.20,22,1","1.22,75,1,94,1,107,3,110,1,113,2","1.23,94,1","1.24,107,2,109,2,111,2","1.25,22,1,75,1,111,1,121,2,123,1","1.28,106,1","1.29,75,2","1.3,75,1,92,2,94,3,100,7,107,3,111,4","1.3&rdquo,9,1","1.4,94,2,102,1,103,1,104,1,108,1,107,4,109,6,111,2","1.40,101,1,105,1,106,1","1.42,110,1,113,1","1.4301,111,1","1.4305,111,1","1.5,66,1,68,1,70,2,75,1,94,3,101,3,102,3,103,3,104,3,105,2,108,3,106,2,109,1,110,1,111,4,113,1,121,2,123,3","1.50,22,1,105,1,121,1,123,2","1.55,94,1","1.57,105,1","1.58,94,1,107,2","1.5m,17,1","1.5v,16,1","1.6,104,1,107,10,109,2,111,2","1.69,107,1","1.7,101,1,102,1,104,1,105,1,108,3,106,1","1.70,22,1","1.75,101,2,102,2,103,2,104,2,105,2,108,2,106,2","1.77,101,1,102,1,103,1,104,1,106,1","1.77in,105,1","1.78,94,1","1.8,108,2","1.800.390.6405,92,1","1.800.866.6659,92,1","1.81,101,1,102,1,103,1,104,1,105,1,108,1,106,2","1.82,17,2","1.847.782.5277,92,1","1.85,106,1","1.9,104,2,105,3,106,2,107,8,110,1,111,1,113,1,121,1","1.910.879.5486,92,1","1.92,101,1,102,1,103,1","1.94,94,1","1.96,94,1,101,1,102,1,103,1,104,1,105,1,106,1","1.97,107,9,109,2,110,1,113,1","1.qxd,121,4,122,4,123,4,124,4","1°c,124,1","1µm,106,1","10,1,1,8,1,10,2,13,1,15,1,17,1,48,2,57,2,19,8,20,3,22,1,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,39,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,47,2,49,2,50,2,51,19,52,10,53,2,54,2,55,2,56,2,58,2,59,2,60,57,62,3,63,4,64,1,65,2,66,13,67,3,71,1,68,9,69,7,70,12,72,1,74,1,76,1,78,1,79,2,89,2,90,1,91,1,92,1,94,14,97,1,100,2,101,7,102,82,103,6,104,4,105,4,108,43,106,6,107,22,109,18,110,4,118,1,111,32,113,1,114,10,115,4,117,6,119,6,124,5","10&ordm,87,1","10&rdquo,9,2","10.0,60,1,66,1,102,1,108,1","10.00,22,1,26,1,31,1,32,1,33,1,36,1,37,1,38,1,74,1,99,1","10.5,111,1","10°,92,1,94,1","100,13,1,22,14,60,2,62,2,63,2,66,3,67,3,68,4,69,2,70,5,85,4,76,3,81,6,82,7,83,4,84,4,86,10,88,1,89,1,90,2,91,6,92,2,94,6,101,7,102,6,103,3,104,2,105,2,108,7,106,7,107,15,109,3,118,2,111,18,113,1,114,23,115,4,121,3,123,2,124,5","100&ordm,85,1,81,1,82,2,83,1,84,1,86,1,88,1,91,1","100.0,70,1","100°,119,2","100°c,123,2","100°f,123,1","1000,22,9,62,3,67,1,69,2,70,1,94,5,97,1,101,1,103,3,106,1,109,1,111,2,114,1,121,1,122,1,123,2","1000&deg,12,1,22,5","1000°f,121,1,123,2","10000,96,1,95,1,97,1,122,1,123,1","1000mm,70,1","1000ºf,121,1","100hz,92,1","100k,92,1,94,1","100m,92,1,94,1","100mbit,67,1","100mm,68,2","100mohms,124,1","100ms,124,1","100º,114,3","100ºc,121,2","100ºf,114,22,115,4,121,3,123,2","101,62,1,65,1,103,1,105,1","101.00,19,4","101.77,18,1","10-11,97,1","10-15,119,1","102,65,1,105,1","10-2000,66,1,101,1,102,1,103,1,104,1,105,1,108,1,106,1","1025,10,1,60,1,102,1","103,65,1,105,1","10-32,107,1,109,1,110,1,113,1","10-32v,99,1,124,1","10-396,60,1,62,1,63,1,64,1,65,1,67,1","104,19,2,100,1","10-40,119,1","105,10,1,105,1,106,2","105.00,59,1,99,1","10-50mv,94,1","10­50mv,92,1","106,10,1","1074,10,1","109.00,17,1","109.80,27,1,29,1,30,1,34,1,35,1","1090,60,1,102,1","1092,94,1","10ga,22,1","10mil,14,2,18,8","10mm,70,2","10ºf,117,2","10-pin,63,1,66,3,74,1,101,1,108,3","10th,114,1","10vdc,102,2,124,1","11,10,1,48,1,57,1,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,10,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,2,63,1,64,1,65,2,66,2,67,2,68,1,69,1,70,1,94,6,97,1,101,1,102,2,103,1,104,1,105,1,108,2,106,1,107,7,109,2,110,3,118,1,111,2,113,3,114,2,117,6","1-1,10,4,18,4,20,5","11.00,59,1","11.01.3,117,2","11.6,107,2,109,2,111,2","110,77,1","1100&ordm,82,1","11000,8,1","1100ºf,114,3","11-030000-000,89,4,117,2","11-030000-048,89,4,117,3","11-030002-000,89,4,117,2","110ºf,114,1","112,114,4,115,3","112.00,73,2,66,1","113.40,27,1,29,1,30,1,34,1,35,1","11-30000-000,89,1","11-30000-048,89,1","11-30002-000,89,1","1133,10,1","115,92,1,94,4","11500,10,1","115vac,92,1","116.00,73,1,75,1","117,19,2,100,1","118.55,18,1","11898,62,1,64,1,103,2,104,2","119.00,19,2","11ºf,117,1","11v,124,1","12,14,1,16,3,17,1,48,2,57,2,19,4,20,1,22,2,26,3,27,2,29,2,30,2,31,3,32,3,33,3,34,2,35,2,36,3,37,3,38,3,39,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,47,2,49,2,50,2,51,2,52,2,53,2,54,2,55,19,56,2,58,2,59,2,60,5,62,3,63,3,64,2,65,4,66,3,67,3,71,2,68,2,69,4,70,2,72,2,85,1,81,1,82,1,83,1,84,1,86,1,87,1,88,1,92,1,94,11,100,2,101,4,102,8,103,2,104,2,105,4,108,4,106,3,107,4,109,5,110,2,111,6,113,2,114,3,119,8,123,1","1-2,9,1,16,1,40,1,48,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,39,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,68,1,69,1,70,1,76,1,89,1,107,1,109,1,111,1","12.0,60,1,102,1","12.00,27,1,29,1,30,1,34,1,35,1,76,1,77,1","12.01.9,119,2","12.5,60,1,62,1,63,1,64,1,65,1,66,1,67,1,107,2,114,1,121,1,123,1","12.5m,17,1","12.7,94,2","12.70,92,2","120,19,24,60,2,62,2,63,2,64,2,65,2,66,2,67,2,68,2,89,1,90,1,94,1,100,27,107,4,114,7,117,1","1-20,67,1,106,1","120.0,68,1","120.00,76,1","1200,60,1,62,1,63,1,64,1,65,1,66,1,67,1,69,1,85,1,81,1,82,1,83,1,84,1,86,1,89,1,102,1,104,1,117,1,124,1","1200m,60,1,62,1,63,1,64,1,65,1,66,1,67,1,69,1","1200mm,60,1,62,1,64,1","1200u,60,1,62,1,63,1,64,1,65,1,66,1,67,1","120db,92,1","120v,100,1","120vac,87,7,89,1,117,1","1211,11,1,99,13,97,2,124,4","1211-ab-b-1-r,124,1","1211-b-b-1-r,99,1,97,2,122,2","121mm,15,1","122.27,14,1","122°f,92,1,94,1","123,10,2","1235,97,1,122,1","124.00,63,1,66,1","1­247,92,1","1248,19,2,100,1","125,10,1,62,3,64,1,69,1,91,1,103,2,104,2,105,2,107,1,111,1,119,12","125.00,19,4","1250,69,2,107,1,109,1","1250mm,69,1","125-250,91,2","1254,11,1,98,16,99,4,124,4","1254-1-r,98,1,124,1","125ºf,114,1","126.83,18,2","127,103,2","127.00,73,1","128.00,82,2","1290,97,1,122,1","129-224,20,1","12-992012-xxx,119,1","12a,90,1,118,2","12-a27020-000,93,2","12-a27020-001,93,2","12-a27021-000,93,2","12-a27021-001,93,2","12-b27020-000,93,2","12-b27020-001,93,2","12-b27021-000,93,2","12-b27021-001,93,2","12-e27120-000,93,2","12-e27120-022,93,2","12-e27121-000,93,6","12-e27121-020,93,2","12-e28020-003,93,2","12-e28021-005,93,2","12-f27120-000,93,2","12-f27120-022,93,2","12-f27121-000,93,2","12-f27121-020,93,2","12-f28020-003,93,2","12-f28021-005,93,2","12-g27120-000,93,2","12-g27120-022,93,2","12-g27121-000,93,2","12-g27121-020,93,2","12-g28020-003,93,2","12-g28021-005,93,2","12-h27121-000,93,2","12-h27121-020,93,2","12-h28021-005,93,2","12hr,94,1","12ºf,114,1","12-x27020-000,119,3","12-x27020-001,119,3","12-x27021-000,119,3","12-x27021-001,119,3","12-x27120-000,119,4","12-x27120-022,119,2","12x27120-022,119,1","12-x27121-000,119,4","12-x27121-000-225,119,1","12-x27121-020,119,3","12-x28020-003,119,2","12x28020-003,119,1","12-x28021-000,119,1","12-x28021-005,119,4","13,10,2,19,2,20,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,53,17,60,1,62,3,63,3,64,2,65,3,66,2,67,3,68,1,69,1,70,1,94,4,100,3,101,3,102,4,103,3,104,1,105,1,108,3,106,1,107,10,109,1,111,2,114,5,117,3,119,1","1-3,12,1,13,1,15,1,73,1,19,1,20,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,74,1,85,1,75,1,77,1,78,1,81,1,82,1,83,1,84,1,86,1,90,1,91,1,125,1","13.3,94,1","13.5,107,2,110,1,111,3,113,1","130,122,2,123,8","130.00,99,1","1300,11,1","131,97,1,122,3,123,8","131°f,94,1","1310,97,5,122,1","1310-130-rx-aa,122,1","1311,97,6,122,1","1311-130-rx-aa,122,1","1312,97,5,122,1","1312-135-rx-aa,122,1","1313,10,1,97,4,122,1","1313-131-rx-aa,122,1","13-14,66,1","13-15,60,1,68,1,69,1,70,1,109,1,111,1","1-315-797-0403,94,1","1-315-797-2222,94,1","13413,94,3","135,121,9,122,1","135.00,19,1","1350,121,1,123,1","1360°c,94,2","137.00,9,1","1375,10,1","138.00,73,1","1381,100,1","139,10,1","14,19,1,22,2,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,54,18,60,1,62,3,63,2,64,2,65,3,66,2,67,2,68,1,69,1,70,1,92,2,94,11,101,3,102,2,103,1,104,1,105,3,108,3,106,1,107,4,109,2,110,1,111,5,113,1,114,8","1-4,97,1","14.0,92,2","14.00,77,1","14.2mm,124,2","14.5,101,1,102,1,103,1,104,1,105,1,108,1,106,1,110,2,113,2","14.6,94,1,107,9,109,1","140,68,1,69,1,70,1,90,1,93,20,94,1,107,1,109,1,110,1,111,1,114,4,115,1,119,2","140&deg,93,10","140°c,94,1","1400,114,1,121,1,123,1","1400&deg,16,1","1400&ordm,19,1","1400°f,94,2","1400f.,19,4","1400of,100,5","14072,121,2,122,2,123,2,124,2","14-16,62,1","142,10,1,92,1,94,1","142.10,12,1,13,2,16,1","14-25,20,1","143,118,1","143.00,83,2","145,10,1","145.00,76,1","147.00,77,1","14700,10,1","1472,10,1","149,114,2","149°f,92,1,94,1","149ºc,114,1","15,17,1,57,18,20,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,60,3,62,5,63,4,64,4,65,7,66,10,67,4,71,2,68,3,69,5,70,3,72,2,76,1,91,1,92,1,94,6,101,7,102,6,103,10,104,6,105,12,108,8,106,6,107,10,109,10,110,4,118,1,111,9,113,4,114,3,117,1,119,1","1-5,14,1,67,1,106,1","15.0,91,1","15.00,94,1,98,1","15.88,114,2","150,22,9,69,2,92,1,94,1,109,1,121,1,123,1","1500,69,3,96,1,95,1,97,1,109,6,118,1,117,1,122,1,123,2","15000,114,1,123,1","1500ºf,114,1","150db,124,2","151.00,10,1,88,1","1525,68,1,108,2","15-5,121,1,123,1","155.00,9,2,97,2","155.6,94,1","155°f,118,2","1555,10,1","156,19,6,100,3","1569,10,1","157.00,82,2","158.00,19,1","158.06,18,2","1588,10,1","159.00,85,2","15ºf,114,1","1­5v,92,1","1-5vdc,94,1","16,10,2,19,5,20,5,21,2,22,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,56,17,60,2,62,2,63,2,64,2,65,2,66,1,67,3,85,1,81,1,82,1,83,1,86,1,94,8,100,2,101,5,102,5,103,3,104,3,105,3,108,6,106,5,107,1,109,1,111,3,114,1,117,1,121,1,123,1","16.4,110,1","160,93,20,119,2","160&deg,93,10","16000,114,1","1600of,100,1","160ºf,114,1","16-19,60,1","162.00,82,2","16-20nf2,87,1","16-32,123,1","165°,119,2","1650°c,94,4","165ºf,114,1","166.00,81,2","167,101,1,104,1,102,1,103,1,105,1,106,1,107,1,109,1,110,1,111,1,113,1","167&deg,62,1,63,1,64,1,65,1,67,1,68,1,70,1","1675,92,1","168,10,1","16-bits,103,1","17,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,60,1,62,2,63,2,64,2,65,2,67,3,85,1,81,1,82,1,83,1,84,1,86,1,87,1,88,1,94,5,101,2,104,1,102,2,103,1,105,1,106,2,117,2,124,1","17.4,111,2","17.50,22,5","170,65,2,105,1","17000,8,1,85,8,82,10,88,1,114,1","17000-0,85,4,82,4","17002-0,85,4,82,4","17052,82,1","170xx,88,3,114,1,115,1","17100,8,1,81,10","17100-0,81,4","17102-0,81,4","17152,81,1","172.00,83,2","17200,8,1,83,10,88,4","17200-0,83,4,88,4","17202-0,83,4,88,4","172xx,88,1,114,1,115,1","173.00,20,1","17300,8,1,85,2","17302,119,1","173xx,88,1,114,1,115,1","174.00,86,2","175,94,1,117,1","175&ordm,91,1","175°f,118,2","17500,10,1","175ºf,114,1","176,108,1","176&deg,66,1","176°c,118,1","176°f,123,1","176ºf,121,1","178.00,82,1","17800,8,1,84,10","17800-0,84,4","17802-0,84,4","18,20,1,22,1,26,1,27,2,29,2,30,2,31,1,32,1,33,1,34,2,35,2,36,1,37,1,38,1,60,1,62,2,63,1,64,2,65,1,67,2,71,2,68,1,69,2,72,2,94,7,96,1,95,1,97,2,101,3,104,3,102,3,103,2,105,1,108,1,106,1,109,2,110,2,118,3,113,3,121,1,123,1","18°,108,3,107,6","180,100,2","1800,13,1","18000,8,1,86,11,114,1","18000-0,86,4","18002-0,86,4","1-800-498-4442,107,1,109,1,111,1","1-800-633-7609,107,1,109,1,111,1","1-800-866-6659,94,2","1-800-fenwal-1,118,4,114,8,115,1,117,2,119,4","18052,86,1","18-19,63,1","183.40,14,1","1830,67,1,101,1,104,1,102,1,103,1,108,1,106,1","184.00,73,1,85,2","185,108,1","185.00,16,1","188.00,88,1","18900,10,1","18ºf,117,1","18v,124,1","18va,92,1","19,21,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,60,1,62,2,63,1,64,1,65,2,67,3,94,1,101,1,104,1,102,4,103,2,105,3,106,5,107,4,110,1","19.5,107,3,110,1,113,2","190,10,1,93,20,119,2","190&deg,93,10","190.00,88,1","190.25,18,1","191.00,71,1,72,1","1914,10,1","1-919-677-2343,107,1,109,1,111,1","194.00,81,2","194-0211,107,1,109,1,110,1,111,1,113,1","1945,1,1","1947,6,1","195,19,2,100,1","195.00,73,1,99,1","197,101,1,104,1,102,1,103,1,105,1,108,1,106,1","197.00,91,2","197.1,101,1,104,1,102,1,103,1,105,1,108,1,106,1","1970,7,1","1992,92,2,94,1","1993,92,1,94,1","1994,92,1,94,1","1997,94,2","1999,124,1","1999&deg,16,1","19999,124,1","1amp,87,1","1c&deg,12,1,16,1","1f&deg,12,1","1f&ordm,91,1","1mbps,103,1","1-millivolt,94,1","1ms,66,1","1sl,17,2","1st,107,1,111,1","2.0,60,1,62,2,64,2,75,1,104,2,102,1,103,2,105,2,107,2,109,3,111,2,119,3,121,3,123,3","2.00,22,1,77,2,79,1,105,2","2.09,106,1","2.0a,103,1","2.1,94,2,101,3,104,1,102,3,103,3,105,1,108,3,106,1,109,1,111,2,113,2","2.12,105,2","2.17,106,1","2.19,94,1","2.2,94,2,104,1","2.24,107,1","2.25,87,1","2.3,94,2,101,1,113,1","2.3.1,94,2","2.4,94,2,109,1","2.4.1,94,1","2.4.2.1,94,1","2.4.2.2,94,1","2.4.3,94,1","2.4.4,94,1","2.4.5,94,1","2.4.6,94,1","2.49,75,2","2.5,60,1,62,1,63,1,64,1,65,1,66,1,67,1,92,2,94,2,100,7,101,3,104,5,102,3,103,3,105,3,108,4,106,3,111,1,114,1,121,1","2.5&rdquo,9,1","2.50,21,1,22,1","2.56,123,2","2.5a,92,1","2.5m,17,1","2.5mb,6,1","2.6,101,2,104,2,102,2,103,2,105,2,108,2,106,1","2.67,101,1,104,1,102,1,103,1,105,1,106,1","2.68,107,9,109,2,110,1,113,1","2.7,101,1,102,2,108,2,107,2","2.72,94,1","2.73,94,1","2.75,15,1","2.7in,101,1","2.8,107,2,109,1","2.85,110,2,113,2","2.95,101,1,102,1","2°f,118,1","20,7,1,10,2,13,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,60,29,62,5,63,3,64,2,65,2,66,8,67,6,68,10,69,7,70,11,94,6,96,1,95,1,101,4,104,4,102,41,103,6,105,5,108,26,106,8,107,19,109,16,110,3,111,16,113,3,119,1,121,1,123,2","20.0,94,1","20.00,78,2,99,1","20.00ma,94,1","20.4,66,1,108,1","20.7,107,2","20.qxd,117,4","200,22,9,60,1,62,1,63,1,64,1,65,1,66,1,67,1,69,2,94,8,101,4,104,2,102,2,103,2,105,2,108,2,106,2,109,1,114,2,121,2,123,1","200&deg,15,1","200.00,71,1,72,1","200.0ohms,94,1","200°c,94,3","2000,22,9,65,1,101,2,104,1,102,1,103,1,105,2,108,2,107,1,109,1,110,1,111,1,113,1,121,1,123,2","20000,8,1,91,9,123,1","20000-0,91,8","2002,4,1","2004,114,1","2005,92,1","2006,110,1,113,1","2007,118,1","2009,10,1,11,1,17,1,20,1,96,1,95,1,98,1,99,1,97,1,117,1,119,1","201.00,86,2,93,4","2010,60,1,62,1,63,1,64,1,65,1,66,1,67,1,74,1,85,1,75,1,77,1,81,1,82,1,83,1,84,1,86,1,87,1,88,1","2011,1,1,6,1,7,1,8,1,9,1,12,1,13,1,15,1,16,1,48,1,57,1,73,1,19,1,24,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,71,1,68,1,69,1,70,1,72,1,76,1,78,1,80,1,89,1,90,1,91,2,93,1,107,1,109,1,111,1","201542,75,1","201542-2,73,2,75,3,77,1,111,4","201553,75,1","201554,75,1","202.00,81,1","20-22,62,1","20-4,69,1","204b,118,1","204ºc,114,8","20-50,92,1,94,3","205-355,20,1","207,62,2,103,1","208,10,1,19,4,91,1,100,2","208.00,86,2","209,123,2","209.00,93,4","20ma,94,3,124,3","20unf,121,1","21,17,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,62,1,71,2,69,1,72,2,94,3,96,1,97,1,103,2,107,1,109,4,110,2,111,1,113,2","2-1,14,1,20,1","21.00,9,2","21.3,94,1","21.qxp,114,4,115,4","210,91,1,93,20","210&deg,93,10","210.00,71,1,72,1","2100,10,1","2-100,66,2","21000,91,1","211,91,1,117,1","2-11,48,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1","2-14,119,1","214.00,81,1","215.00,10,1,93,4","217.00,71,1,72,1","219,123,2","2-1a,94,3","2-1b,94,2","2-1c,94,3","22,20,2,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,62,2,69,1,94,2,101,1,102,1,103,4,109,1","2-2,94,3","22.00,74,1","22°,119,1","220,94,1","2-20,121,1,123,2","220°f,94,1","2-200,60,1,62,1,63,1,64,1,65,1,66,1,67,1","22000,91,1","221&deg,68,1","225,93,20,119,2","225&deg,93,10","225&ordm,91,5,93,10","225.00,86,1,91,2,93,18","225°,119,1","22-65,92,1,94,3","227,10,1,91,1","22-7,20,3","227.00,71,1,72,1,78,4","228,91,1","228.00,86,2","228.90,12,1","229.00,86,1","22ma,124,3","23,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,66,1,74,1,75,1,77,1,93,1,94,2,103,1,110,2,113,2","2-3,76,1,93,1,94,3,96,1,95,1,97,1","23.00,73,1,77,1","23.9,94,1","230,94,3,96,1,122,2,123,8","2-300,60,1,62,1,63,1,64,1,65,1,66,1,67,1","23-020100-000,91,1","23-020110-000,91,1","23-020300-000,91,1","23-020310-000,91,2","23-020800-000,91,1","23-020810-000,91,2","23-021000-000,91,1","23-021010-000,91,1","23-021100-000,91,1","23-021110-000,91,1","23-022700-000,91,1","23-022710-000,91,1","23-022800-000,91,1","23-022810-000,91,1","230v,92,1","230vac,92,2,94,1","230x,123,1","231,96,1,122,1,123,8","231x,123,1","232&deg,15,1","234,19,4,100,2","235,95,1,121,10,122,1","236.00,71,1,72,1","2361,10,1","24,9,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,42,18,60,2,61,1,62,2,63,4,64,2,65,2,66,2,67,2,71,2,68,2,69,4,70,2,72,2,77,1,92,2,94,7,100,1,101,9,104,3,102,4,103,6,105,5,108,4,106,5,107,6,109,4,110,3,111,6,113,4,119,3,121,1,123,3","2-4,9,1,10,1,87,1,88,1,94,3","240,9,1,19,37,100,15,114,7,117,1","240.00,76,1","2400,104,1,102,1,103,1,124,1","2400mm,60,1,62,1,64,1","240v,100,1","240vac,85,1,81,1,82,1,83,1,84,1,86,1,89,2,90,1,92,1,94,1,118,2,117,1","24500,10,1","247,94,2","247.00,71,1,72,1","248.20,14,1","24hr,94,2","24v,105,1,110,1","24vdc,66,1,94,1,124,1","24vdcnominal,107,1,109,1,111,1","25,20,1,22,1,60,1,62,1,63,3,66,1,69,1,76,1,91,5,94,2,98,1,99,1,101,7,104,3,102,6,103,4,105,3,108,3,106,3,107,3,109,4,110,1,111,3,113,1,114,2,119,17,123,1","25.00,77,1","25.4,101,1,104,1,105,1,111,1","25.44,18,1","25°,124,1","25°c,92,3,94,4,124,2","250,22,9,62,3,64,1,87,1,91,1,94,1,104,3,103,3,117,1,124,1","250&deg,22,1","250&ordm,88,1,89,1,91,2","2500,62,1,68,2,70,4,103,1,107,5,111,7,123,1","2500°f,94,2","2500mm,68,2,70,1","250ºf,114,4,115,4,117,1","250va,92,1","250vac,124,1","251,10,1","251298-2,75,2","251416,75,1","251416-2,73,1,75,2,77,1,101,1,104,1,102,1,103,1,105,2,108,1,106,1,107,3,111,1","251447,73,1,75,1,111,2","251975,73,1,77,1,109,1","252110-1,75,1","252111-1,75,1","252173-d53,78,1,105,1","252173-d63,78,1,105,1","252182,73,1,75,3,101,1,104,1,102,1,103,1,105,1,108,1,106,1,107,2","252182360°,107,1","252183,75,2","252184,73,1,75,2,101,1,104,1,102,1,103,1,105,1,108,1,106,1,107,3","252347,105,1","252382-d62,78,1,103,1","252887,73,1,71,1,72,1,75,1,107,4,110,3,113,3","253,10,1","253.00,93,4","253.67,18,1","253124,78,1,102,2","253294,108,1","253309,102,1","253309-1,78,1","253310,101,1","253310-1,78,1","253311-1,78,1","253312-1,78,1","253572,73,1,111,1","253853,78,1","254.00,84,2","2540,66,2,108,6","254206,107,1,109,1,111,1","254207,107,1,109,1,111,1","254210,73,1,109,1","254235,73,1,109,1","254257,73,1","254258,73,1","254259,73,1","254261,73,1","255-10060mm,60,1,62,1,63,1,64,1,65,1,67,1","257&deg,12,2","258.00,10,1,71,1,72,1","2-5a,94,3","2-5b,94,3","25mm,68,2,69,1,70,2","25mv,94,1","25ºc,114,1","26,11,1,12,1,13,1,16,1,20,1,63,2,73,1,94,1,101,5,104,1,105,1","2-6,94,3","26.5,107,2,109,2,111,2","260,94,1","260&ordm,85,1,81,1,82,1,83,1,84,1,86,1,87,1","260ºc,114,2","260vac,92,1","262,10,2","262.00,93,4","2620,10,1","267.00,93,4","27,9,1,10,1,94,1,104,1,105,1,107,2,109,4,110,1,111,1,113,1,114,5","2-7,94,3","27.00,14,1,62,1,71,1,72,1,73,1,75,1","27.50,15,1","27.9,110,1,113,1","270.00,93,4","27021-0,93,4","271.00,71,1,72,1","27120-0,93,4","27120-022,119,1","27121-0,93,4","27121-020,119,1","275,93,20,119,2","275&deg,93,11","275.00,88,1","27513,107,1,109,1,110,1,111,1,113,1","276.00,93,4","2770,121,2,122,2,123,2,124,2","28,48,1,57,1,20,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,94,1,101,3,104,4,102,3,103,3,105,3,108,2,106,2,109,5,121,1,123,1","2-8,94,3","28.00,60,1,63,2,66,1","28.31,123,1","28.8,66,2,108,3","28020-003,119,1","28021-005,119,1","281,100,2","281.00,84,2","2815-10-050,18,1","2815-10-075,18,1","2815-10-100,18,1","2815-10-150,18,1","2815-10-200,18,1","2815-10r-050,18,1","2815-10r-200,18,1","2815-3-050,18,1","2815-3-100,18,1","2815-3-150,18,1","2815-3-200,18,1","2815-3r-075,18,1","2815-5-050,18,1","2815-5-075,18,1","2815-5-100,18,1","2815-5-150,18,1","2815-5-200,18,1","2815-5r-050,18,1","2815-5r-075,18,1","2815-5r-100,18,1","2815-5r-150,18,1","2815-5r-200,18,1","2815-5r-300,18,1","2815-5r-400,18,1","2815-6-050,18,1","2815-6-075,18,1","2815-6-100,18,1","283.00,93,2","28-49,20,1","285.00,71,1,72,1,93,4","285-0175,23,1","288.00,9,1","289.00,91,2","29,6,1,94,1,95,1,105,1,107,6","29.00,76,1,90,1","290.00,76,1","29060,10,1","29-7,20,1","297.00,93,2","2983,10,1","2-9a,94,3","2-9b,94,3","2a,121,1","2c&deg,16,1","2f&deg,12,1,16,1","2in.to100in,107,1","2in.to120in,107,1","2nd,107,2,109,1,111,2","2ºc,114,1","2-volt,94,1","2x,101,1,102,1,108,4","2xx,96,1,95,1,123,2","3.0,72,1,101,1,102,1,105,1,113,1","3.00,22,1","3.1,94,2,105,1","3.2,94,2,104,1,103,1,105,1,108,1,106,1,111,4","3.2.1,94,1","3.2.2,94,1","3.2.3,94,1","3.2.4,94,1","3.2.5,94,1","3.25,19,2,100,3","3.3,94,2,107,4,122,5","3.33,121,2,123,2","3.4,94,2,104,1,111,1","3.45,91,1","3.5,91,1,105,1","3.5-15,121,1,123,1","3.5m,17,1","3.63,118,1","3.7,63,1,101,1,105,1","3.8,92,1,94,1","3.9,105,1,106,2","3.94,94,1","3_ds,117,4","30,10,1,11,1,20,1,71,3,69,2,70,3,72,3,79,2,94,1,96,10,97,5,101,4,104,2,102,5,103,4,105,2,108,3,106,1,107,4,109,5,110,4,118,1,111,4,112,1,113,4,114,1,121,1,122,3,123,6,124,2","30&deg,13,1","30.00,9,1,73,2,75,2,96,1,95,2,99,1","30°,92,1,94,1,119,1","300,17,2,22,9,60,1,62,1,63,1,64,1,65,1,66,3,67,1,69,2,73,2,87,1,93,14,94,1,100,2,101,5,104,3,102,3,103,3,105,3,108,3,106,3,109,1,111,1,114,9,119,5,121,1,123,1","300&ordm,89,1,91,8","300.0,66,1","3000,68,1,96,1,95,1,97,1,107,4,122,1,123,1","3000°f,94,4","30000,8,1,89,2,117,3,123,2","30000-0,89,4","30002-0,89,4,117,1","3000mm,68,1","3001,107,1,109,1,110,1,111,1,113,1","300ºf,114,1,117,1","300ss,85,2,81,4,82,5,83,2,84,2,86,5","300v,118,2","302.00,9,2,71,1,72,1","303,69,1","304,62,1,103,1,110,1,111,4,113,1","304l,66,1,101,1,104,1,102,1,103,1,105,1,108,1,106,1","305,123,2","307,123,2","30vdc,124,1","31,11,1,48,18,61,1,91,1,94,1,96,10,97,3,107,4,109,1,110,1,113,2,114,8,122,2,123,1","31.5,107,2,109,2,111,2","31.71,18,2","310,1,1,2,1,3,1,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,18,1,48,1,57,1,19,1,20,1,21,1,22,1,23,2,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,71,1,68,1,69,1,70,1,72,1,73,1,74,1,85,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,84,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,96,1,95,1,98,1,99,1,97,1,112,1,125,1","310-837-4947,1,1","312,19,10,100,5","312.00,71,1,72,1","314.00,78,3","315-797-0403,94,1","315-797-2222,94,1","315ºc,114,1","316,86,1,114,1,123,1","316ºc,114,11","316ss,86,3","318,10,1","31a,114,4,115,3","32,47,18,61,1,63,1,65,1,87,2,94,1,101,1,111,1","32.00,75,2","32.5,106,1,107,2","32°,92,1","32°f,94,1","321,114,3,115,3","321ss,88,3","322.58mm,94,2","322.6,92,2","323,23,2,112,1","32322,12,13","32322-k,12,1","323-870-7733,1,1","325,93,20,119,2","325&deg,93,11","325&ordm,93,4","325°,119,2","32-bits,103,1","32º,114,1","32ºf,114,1","32vdc,87,3","33,49,18,61,1,66,1,92,1,101,3,104,1,102,3,103,3,105,1,108,2,106,1,107,1,111,3","33.00,73,2,74,3,75,2,89,3","33.0mm,94,1","330,94,1,122,2,123,8","330°f,94,1","330x,123,1","330z,123,1","331,97,1,122,3,123,8","331-rv-cf,123,1","331x,123,1","331z,123,1","33260,10,1","335,121,10,122,1","335.00,10,1","335-rz-cc,121,1","336,114,2","336.00,91,2","33-7,20,1","33mm,92,1","34,20,1,50,18,61,1,111,2,114,7","34.33,18,1","34.6,94,1","340.00,71,1,72,1","34-011100-002,88,2,114,1,115,1","34-011201-000,88,1,114,1,115,1","34-011204-000,88,1,114,1,115,1","34-011208-000,88,1,114,1,115,1","340-9800,100,1","340-9811,100,1","34-7,20,1","34a,91,1","35,10,1,11,1,20,1,95,9,97,4,106,1,107,4,109,2,118,2,111,2,114,4,121,1,122,1,123,1","3-5,93,1,96,1,95,1","35.6,101,1,104,1,102,1,103,1,105,1,106,1","350,66,1,101,1,104,1,102,1,103,1,105,1,108,1,106,1,118,1,111,1,121,2,123,2","350°f,118,1","3500,10,1,123,1","352,13,1","35200,13,3","35200-j,13,1","35200-k,13,17","3545,92,1","355.6mm,94,2","356,92,2","356mm,92,2","35ma,124,2","36,14,17,18,29,71,2,69,1,72,2,96,1,95,1,100,1,101,1,104,1,102,1,103,1,105,1,108,1,106,2,107,1,109,5,110,4,111,1,113,4,121,2,123,2","36.00,9,1,19,6,76,1","36.10,15,1","360,90,1,93,12,100,2,119,2","360&deg,93,6","360&ordm,93,6","360°,108,1,107,2","364.00,91,2","369,10,2","37,101,1,104,1,102,1,108,1,106,1,113,1","370.00,91,2","370013,74,1,101,1","370015,74,3","370017,74,2","370018,74,2","370030,74,1","370160,74,1","370375,74,1,104,1","370376,74,1,104,1","370391,74,1","370423,74,1,103,1,105,1","370427,74,1,105,1","370504,105,1","370514,105,1","370515,105,1","370523,106,1","370618,73,1,107,2,109,2,111,2","370619,73,1,107,2,109,2,111,2","370671,73,1,107,2,109,2,111,2","370672,73,1,107,2,109,2,111,2","370673,73,1,107,1,109,1,111,1","370674,73,1,107,1,109,1,111,1","370675,73,1,107,1,109,1,111,1","370676,73,1,107,1,109,1,111,1","370ºc,114,2","372.00,71,1,72,1","375°,119,2","38,20,1,103,1,105,1,106,1,109,1,117,1","38.00,14,1","38.16,18,1","38.55,42,1","38.6,94,1","380009,77,1","380078,108,1","3803,94,1","381-10-yd,14,1","381-3-1200,14,1","381-3-yd,14,1","381-5-163,14,1","381-5-200,14,1","381-5-250,14,1","381-5-300,14,1","381-5-400,14,1","381-5-600,14,1","381-5-yd,14,1","381-6-yd,14,1","382.00,91,2","382.80,13,2","3838,110,1,113,1","385,19,1,100,1,124,1","39,19,2,100,1,106,1","3-9,85,1,81,1,82,1,83,1,86,1","39.00,73,4,77,1,78,1","39.52,18,2","392,124,1","392&deg,15,1","392-8569,1,1,2,1,3,1,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,18,1,48,1,57,1,19,1,20,1,21,1,22,1,23,1,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,71,1,68,1,69,1,70,1,72,1,73,1,74,1,85,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,84,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,96,1,95,1,98,1,99,1,97,1,125,1","3-hole,85,1,87,1","3mil,14,3,18,6","3-milliamp,94,1","3ºc,114,1","3ºf,114,3","3watlow,23,1","3xx,96,1,95,1,123,1","4&rdquo,9,1","4.0,104,1,103,1,121,1,123,1","4.1,94,2,105,1,106,2","4.2,94,3","4.3,94,2,107,1,110,1,111,3,113,1","4.3.1,94,1","4.3.2,94,1","4.5,107,1","4.5m,17,1","4.7,92,2,94,2","4.75,15,1","4.89,94,1","4.91,94,1","4°f,94,1","40,10,2,12,2,15,2,20,1,23,1,60,1,62,1,63,1,70,2,100,1,101,3,104,3,102,2,103,3,105,3,108,2,106,3,107,15,109,4,110,2,111,10,113,2,119,1","40&deg,12,2,15,2,62,2,63,2,64,2,65,2,66,2,67,2,68,2,69,1,70,1","40&micro,64,1","40.0&deg,12,2","40°,119,1","­40°,92,2","40°c,94,1","400,69,2,90,1,94,2,101,2,109,1,118,1,114,2,117,1,119,1","400&ordm,85,2,81,2,82,2,83,2,84,2,86,2","400.0,60,2,102,2","400°c,94,4,123,1","400°f,94,2","4000,60,1,102,1","400533,73,1,75,1,111,1","400633,73,1,75,1,111,2","400755-3,74,1","400802,77,1,105,2,110,3,113,4","400867,73,1,77,1","400ºc,121,1","400ºf,114,8","401032,75,1","401327,74,1","401366,74,1","401467,75,1","401468,75,1","401600-1,77,1","401603,77,1","401727,78,1","401913,77,1","40250,10,1","403508,69,1,73,1,107,7,109,4","403606,73,1","40f,93,1","40ma,94,2","40ºc,114,5","41,101,1,104,2,102,1,103,1,106,1,107,2","41.00,77,1","4100,92,1,94,3","412,16,11,123,2","412-0-8,16,1","414,123,2","416,19,4,100,2","4-16,66,1,77,1,101,1,104,1,102,1,103,1,105,1,108,1,106,1,111,1","42,20,2,71,2,69,2,72,2,109,1,110,4,113,4,121,1,123,2","42.00,74,2,75,1","4-20,69,1,96,1,95,1,97,1,121,1,122,5,123,4","4-20ma,94,2,99,3,124,3","4­20ma,92,1","422,113,1,124,1","4-24,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1","425,90,1","426,10,1","4-28,69,1,73,1,77,2","43,108,1,107,1,114,1","43.08,58,1","435,10,1","4350,111,1","43760,10,1","44,101,1,104,1,102,1,105,1,108,2,106,1,107,1,109,1,110,1,113,1,123,4","44.00,19,12,75,2","44.5,101,2,104,2,102,2,103,2,105,2,108,2,106,2","440,90,1","443,10,1","443-9669,23,1","444.00,10,1","45,38,1,66,1,93,1,101,2,104,2,102,2,103,2,105,2,108,4,106,2,107,2,111,1,114,1,119,1,123,2","4-5,96,1,95,1","45.00,74,1,96,1,95,1","45.36,54,1","450,93,12,111,1,119,2","450&deg,15,1,93,5","450&ordm,93,3","450°,119,2","4500,12,1,65,1,105,2","459-3787,23,1","45ºc,114,5","46,20,1,101,1,104,1,102,1,103,1,105,1,108,2,106,1","4-6,60,1,62,1,63,1,64,1,65,1,66,1,67,1,71,1,68,1,69,1,70,1,72,1","46.00,90,1","46.80,56,1","468,19,3,100,2","468.00,97,2","47,108,1,106,2,123,2","4-7,60,1,62,1,63,1,64,1,65,1,66,1,67,1,68,1,69,1,70,1","47.00,74,4","4700,10,1","47000,82,1","47102,81,1","47­63hz,92,1","48,10,1,71,4,69,2,72,4,92,1,94,2,108,1,109,1,110,5,111,1,113,5,119,3,124,2","4-8,107,1,109,1,111,1","480,23,2,100,2","4800,104,1,102,1,103,1,107,1,109,1,111,1,113,1,124,1","48000,86,1","4800mm,60,1,62,1,64,1","4813,114,1","482&deg,22,8","4823,118,1","485,124,1","48hr,94,1","49,101,1,104,2,102,1,103,1,105,2,108,1,106,2,107,6,110,2,113,2","49.00,77,1","49.50,18,2","49.68,14,1","49.92,50,1","491,110,1,113,1","492.00,10,1","49-2351-56491,107,1,109,1,111,1","49-2351-9587-0,107,1,109,1,111,1","495&deg,12,2","49-84,20,1","498-4442,110,1,113,1","4f&deg,16,1","4mv,94,1","4-pin,65,1,67,1,105,5,106,4","4-rtd,94,1","4x,9,2,92,3,94,2","5.0,60,1,62,1,64,1,69,1,102,1,119,6,121,1,123,1","5.00,42,1,54,1,56,1,58,1,94,1","5.1,94,2","5.2,94,2","5.32,94,1","5.4,107,1,109,1","5.5,60,1,101,1,104,1,102,2,103,1,105,1,106,1","5.5m,17,1","50,1,2,10,1,11,21,17,14,22,9,23,1,60,4,62,4,63,3,64,2,65,5,66,4,67,3,68,4,69,3,70,4,76,1,89,3,91,2,92,1,94,5,96,16,95,15,98,15,99,15,97,21,101,9,104,7,102,9,103,9,105,8,108,12,106,6,107,21,109,11,110,3,111,11,113,3,119,12,121,5,122,6,123,9,125,1","50.00,74,1,90,2,99,1","50.00mv,94,1","50.8,105,2","50.88,18,1","50°c,92,1,124,2","500,17,10,22,9,62,3,64,2,65,2,68,1,69,3,70,1,90,1,91,1,93,6,97,1,101,1,104,5,102,2,103,4,105,3,106,1,107,4,109,5,110,1,111,4,113,1,114,2,119,2,121,3,122,1,123,4,124,1","500&deg,16,1,93,3","500&ordm,86,1,87,2,93,3","500.00,98,1","5000,9,11,92,4,94,4,96,1,95,1,97,1,101,3,104,3,102,3,103,3,105,3,108,3,106,3,111,1,122,1,123,2","5000tm,92,5","50033301,94,1","5005,101,1,104,1,102,1,103,1,105,1,108,1,106,1","50081-1,101,1,104,1,102,1,103,1,105,1,106,1,110,1,113,1","50082-2,101,1,104,1,102,1,103,1,105,1,106,1,110,1,113,1","500mm,68,2,69,2,70,2","500ºf,114,2","500vdc,118,1,124,2","50170,105,1","50-2540mm,66,2","50318-j,13,1","50318-k,12,2,13,2,16,1","504,10,1","50-5080mm,60,1,62,1,63,1,64,1,65,1,66,1,67,1","50-60,94,1","50­60hz,92,1","50-7620mm,60,1,62,1,63,1,64,1,65,1,66,1,67,1","508,118,2,114,2,117,2,119,2","508.00,87,1","5080,60,1,62,1,63,1,64,1,65,1,66,1,67,1,101,2,104,2,102,2,103,2,105,2,108,2,106,2","50-foot,21,5,22,1","50mm,68,2,69,2,70,2","50mmto2500mm,107,1","50mmto3000mm,107,1","50mv,92,1,94,4","50ºc,114,6","50ºf,117,3","51,101,4,104,4,102,4,103,4,105,2,108,5,106,4,109,1,110,2,111,1,113,2,117,3","51.00,74,1","51.50,18,1","52,108,14,107,2,109,2,111,2,117,2","520,19,2,100,1","524-7120,23,1","53,101,1,104,1,102,1,103,1,105,2,108,1,106,2,109,1,111,2,117,1","530,111,1","530026,76,2","530045,76,2","530064,106,1","530065,106,1","530066,106,1","536,10,1","537&deg,13,1","538&deg,12,1,22,1","54,71,2,69,2,72,2,101,2,102,2,103,2,105,3,108,2,109,1,110,2,113,4","54.00,14,1","54.5,94,1","545,110,1,113,1","546.00,87,1","548.00,87,1","55,104,1,106,1,117,2","55.00,19,6","55.20,40,1","55.80,39,1","55°c,94,2","550,90,1","550&ordm,90,1","550919,110,4","550953,108,1","550955,108,1","550956,108,4","550966,78,1,108,1","550967,108,5","550983,108,1","550996,109,10","551033,78,1","551052,78,1","551064,113,4","551073,101,1,104,1,102,1,103,1,108,1","551075,101,6,104,4,102,6,103,6,105,6,108,8,106,6","551248,107,16,109,4","551250,111,14","5516,110,1,113,1","55a,117,1","55ºc,114,9","56,10,1,94,1,110,1,113,1","56.00,74,1","56.88,45,1","560315,77,1","560357,77,1","560444,77,1","560700,74,1,102,1,108,1,113,2","560701,74,1,101,1","560777,111,2","560778,74,1,102,1,103,1,108,1,113,2","560779,74,1,101,1","560884,105,1","560885,105,1","560886,105,1","560887,105,1","560888,105,1","561255,77,1","57,101,1,104,1,103,1,108,1,107,1","57.00,66,1","57.24,57,1","5731,10,1","575,117,1","575&deg,29,1,33,1","58,101,1,104,1,102,1,103,1,108,2,106,2,113,1","58.00,73,2,75,3","580.00,76,1","58513,107,1,109,1,110,1,111,1,113,1","5887,10,1","59,101,1,102,2,108,1","59.00,17,1","59.16,43,1","59.27,18,1","593ºc,114,3","595.00,87,1","599.00,10,1","5a,92,1","5e,106,2","5-foot,60,2,62,1,63,3,66,2","5k,102,1,107,1,109,1,111,1","5m,106,1","5-meter,73,4","5mil,14,8,18,13","5mm,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,2","5mv,124,1","5ºc,114,1","5ºf,114,4","5-pin,64,1,65,1,68,1,69,1,70,1,73,6,74,1,104,3,105,7,107,16,109,9,111,9","5-second,20,1","5-t,94,1","5v,92,2,94,2","6&ordm,87,1","6&rdquo,9,1","6.0,121,1","6.00,57,1,39,1,40,1,45,1,50,1,73,1,123,2","6.5,10,1","6.5m,17,1","6.70,17,2","6.8kg,92,1","60,16,1,58,18,71,2,68,2,69,3,70,1,72,2,82,1,88,1,94,5,108,2,107,1,109,7,110,3,111,1,113,4,114,3,115,3,117,1","60&deg,16,1","60.0,69,1","60.00,76,3","60.24,44,1","60°,107,1,111,1","600,22,2,69,2,93,6,109,1,114,1,119,4,123,1","600&deg,30,1,31,1,93,3","600&ordm,85,3,81,5,82,6,83,3,84,3,86,8,88,1,89,2","60031-1282,92,1","60068-2-27,107,1,109,1,111,1","60068-2-6,107,1,109,1,111,1","600ºf,114,18,115,4,117,2","600v,118,1","602,23,1","606-1818,23,1","608.00,20,1","60hz,92,2,94,1","60ºc,114,1","60psi,114,1,115,1","61,10,1,109,1","61.00,19,6","61.13,14,1","61.2,94,1","610,10,1","61000-4-2,66,1,101,1,104,1,102,1,103,1,105,1,108,1,106,1,107,1,109,1,110,1,111,1,113,1","61000-6-2,66,1,108,1,107,1,109,1,111,1","61000-6-3,66,1,108,1","61000-6-4,107,1,109,1,111,1","61010-1,94,1","612.00,20,1","6122,1,1,23,1,112,1","62,117,2","624,19,7,100,5","624.00,20,1","625,81,1,82,2,86,1,114,2","625060,78,1","625061,78,1","625064,78,1","62a,117,1","63,104,3","63.00,60,20,62,2,65,3,67,1","63.42,18,2","63.5,101,1,104,1,102,1,103,1,105,1,108,1,106,1,111,1","63.5mm,94,1","6300,10,1","6-32,118,1","633.00,20,1","633-7609,110,1,113,1","635&deg,26,1,27,1","636-8635,23,1","64,62,1,64,2,92,1,104,1,108,1,117,1","64&deg,16,1","64.80,53,1","641.00,20,1","642,10,1","64mm,92,1","65,8,1,101,1,104,1,102,1,103,1,105,1,108,1,106,1,114,1","65.00,14,1","65.535,103,1","65°c,92,1,94,1","6500,111,1","656.00,96,1","66,101,2,104,2,102,2,103,2,105,2,108,2,106,2","66.00,66,1","661,23,1","662.00,10,1","67,101,1,104,1,102,1,103,1,105,1,108,1,106,1,107,1,109,1","6-7,96,1,95,1,97,1","67.00,19,6,73,2","67.50,21,4","67000,8,1,87,7,116,3","67100,87,1","67100-0,87,4","67-115,20,1","67300,87,1","677-0200,110,1,113,1","68,13,1,101,4,104,1,102,4,103,2,105,1,108,2,106,1,107,10,109,2,110,1,113,1,121,1,123,1","6-8,107,4,109,4,111,3","68.40,51,1","68.64,55,1","68.67,18,1","68000,87,1,116,3","68-2-27,66,1,101,1,104,1,102,1,103,1,105,1,106,1,108,1,110,1,113,1","68-2-6,66,1,101,1,104,1,102,1,103,1,105,1,106,1,108,1,110,1,113,1","689.00,78,1","69,10,1","69.00,74,1","69.9mm,15,1","690,66,1,101,1,104,1,102,1,103,1,105,1,106,1,108,1","695.00,10,1","6a,114,2","6b,114,1","6h,17,2","6mil,14,2,18,4","6ºf,114,1","6-pin,60,1,62,2,65,1,66,1,73,2,74,2,76,1,102,4,103,4,105,5,108,8,107,2,109,2,111,2,113,4","7.00,43,1,44,1,47,1,51,1,53,1,55,1","7.01.3,116,1","7.01.3_layout,116,4","7.2,109,4","7.5m,17,1","7.qxd,119,4","7°f,118,2","70,63,1,94,1,101,1,114,1","70.00,99,1","70.56,47,1","70°,121,1,123,1","70°c,124,2","70°f,121,3,123,3","700,121,1,123,1","7000,10,1,94,3","700k,85,1,81,1,82,1,83,1,84,1,86,1","700ºf,114,2","70db,124,2","70ºc,114,1","70ºf,114,2","71.5,109,1","716,121,4,122,4,123,4,124,4","719,10,1","72,60,1,62,1,63,1,64,1,65,1,67,2,101,1,104,1,102,1,103,1,105,1,106,1,108,1","72.5,107,2,110,2,113,2","72.60,41,1","725,93,6,119,2","725&deg,93,3","725&ordm,93,3","725°,119,2","73,13,1,114,15","73&ordm,85,1,81,1,82,1,83,1,84,1,86,1","73.00,66,1,76,5","73.08,48,1","735.00,95,1","737,107,1,109,1,110,1,111,1,113,1","7378,118,1","73º,114,2","73ºc,114,7","74.52,46,1","74498,65,1,105,1","75,60,1,69,2,101,3,104,1,102,2,103,1,105,2,106,3,107,9,109,2,110,1,111,7,113,1,121,2,123,1","75&deg,62,1,63,1,64,1,65,1,67,1,69,1","75&ordm,91,1","75.00,21,1,74,1","750,7,1,17,1,69,2,70,1,82,1,97,1,101,1,109,3,111,2,121,5,122,1,123,3","750°f,94,4,121,1,123,2","7500,96,1,95,1,97,1,122,1,123,1","750mm,70,1","750ºf,121,1","75ºf,114,4","76,72,1,101,1,102,5,103,2,108,2,113,1","76&deg,16,1","76.33,18,1","76.43,14,1","760°c,94,2","7600,65,1,104,1,103,1,105,2","760oc,100,3","7612,10,1","7620,60,2,62,2,63,1,64,2,65,1,66,2,67,1,101,3,104,3,102,4,103,3,105,3,106,3,108,3","769.00,87,1","7700,111,1","773-5019,121,2,122,2,123,2,124,2","773-9300,121,2,122,2,123,2,124,2","77497,100,1","775,110,2,113,2","777.00,96,1","78,19,4,100,2","78.7,101,1,104,1,102,1,103,1,108,2","780,19,1,100,1","79.00,19,4","79.03,18,1","79.20,49,1,52,1","7d,105,2","7day,94,1","7f,103,2","7mm,73,1","7mmdia.sensorrod,111,1","7mmrod,111,1","7ºc,114,1","7-pin,63,1,101,5","8.00,48,1,41,1,46,1,49,1,73,1","8.10.12,118,2","8.10.12.qxp,118,4","8.5m,17,1","8.63,123,1","8.66,19,2,100,1","8.67,100,2","8.8,107,2,109,2,111,2","80,94,1,96,1,95,1,106,1,108,1,121,2,123,2","80&deg,66,1","80&ordm,91,1","80°c,123,1","800,1,1,2,1,3,1,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,18,1,48,1,57,1,19,1,20,1,21,1,22,1,23,2,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,2,63,1,64,1,65,1,66,1,67,1,71,1,68,1,69,1,70,1,72,1,73,1,74,1,85,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,84,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,96,1,95,1,98,1,99,1,97,1,103,1,110,2,113,2,125,1","800.390.6405,92,2","800.866.6659,92,2","800-392-8569,1,1,7,2,17,1,21,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,95,1,98,1,99,1,96,1,97,1","803.00,87,1","80ºc,114,1,121,1","80ºf,114,5","81,104,1,103,1,110,2,113,2","8-10,85,1,81,1,82,1,83,1,86,1","8100,10,1","8-14,20,1","81-42-775-3838,107,1,109,1,111,1","81-42-775-5516,107,1,109,1,111,1","816ºc,114,1","82,105,1,106,1,108,1","82.00,19,5","82.20,26,1,31,1,32,1,33,1,36,1,37,1,38,1","8-24nf2,87,1","8-27npt,87,3","83,10,1","83&deg,16,1","83.00,9,3","832,19,2,100,3","8-32,111,1","837-4947,1,1,2,1,3,1,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,18,1,48,1,57,1,19,1,20,1,21,1,22,1,23,2,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,71,1,68,1,69,1,70,1,72,1,73,1,74,1,85,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,84,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1,112,1,125,1","84,107,4,114,1","847.662.2666,92,1","847.662.6633,92,1","85,89,1,94,1,108,1","8-5,1,1","85db,92,1","85ºf,117,1","8-5pst,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,18,1,48,1,57,1,19,1,20,1,21,1,22,1,23,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,71,1,68,1,69,1,70,1,72,1,73,1,74,1,85,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,84,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,96,1,95,1,98,1,99,1,97,1,125,1","86,10,1,104,1","86&deg,13,1","86.00,9,1","86.40,26,1,31,1,32,1,33,1,36,1,37,1,38,1","86.5,94,1","862.00,10,1","87,10,1","87.00,76,1","870,111,1","87-0,110,1,113,1","870-7733,23,1,112,1","875.00,9,1","881.00,20,1","881-2000,118,1,114,1,117,1,119,1","881-6729,118,1,119,1","881-7619,114,1,117,1","882.00,97,2","887,10,2","88bo,92,1","8-9,96,1,95,1,97,1","89.00,78,1","8a,114,2","8b,114,1","8-bit,107,1,109,1,111,1,113,1","8-bits,103,1","8-byte,103,1","8hp,92,1","8hr,94,1","8ºc,114,1","8-pin,68,1,69,1,70,1,73,8,107,16,109,9,111,9","8s,94,1","9.00,52,1,73,1,75,1","9.1,110,2,113,2","9.31,94,2","9.5,101,1,104,1,102,1,103,1,109,4","9.5m,17,1","9_ds,119,4","90,9,1,16,1,60,1,64,1,65,1,67,1,73,4,79,1,92,1,94,1,101,1,104,2,102,2,103,1,105,3,106,1,107,1,109,2,110,2,111,1,113,1","90&deg,74,3,76,3","90.00,9,1,99,1","90°,101,1,104,1,102,1,103,1,105,3,107,4,109,4,111,6,113,2","90°connector,108,1","900,124,1","900&deg,22,2","9002,92,1","90-157,20,1","90232,1,1,23,1,112,1","90-250v,98,1,99,1,124,2","90-264,94,4","90­264vac,92,2","909,23,2","90º,113,1","90ºc,114,2","90ºf,114,6","91,101,2","91.70,14,1","9-11,60,1,62,1,63,1,64,1,65,1,66,1,67,1,68,1,69,1,70,1","915.00,10,1","916,94,1","919,110,1,113,1","92.00,73,2","922.00,10,1","924.00,96,1","93,10,1,114,2","93.00,9,1,66,1","932&deg,16,1","936,19,2,100,2","9-36,121,1,123,1","938.00,95,1","9-40,121,1,123,1","944.00,20,1","95,105,1,110,1,113,1","95.00,19,4","95.12,18,2","96,124,2","96.5mm,94,1","9600,92,1,94,2,124,1","97,119,1","97.1,94,1","971.00,10,1","973.00,10,1","97mm,92,1","9800,10,1","984,110,1,113,1","986,19,1,100,1","99,101,2,102,2,103,2,108,2","991-2484,23,1","999,94,4","999&deg,13,1","999.9,94,1","9999,92,1,94,15,124,1","­9999,92,1","99999,124,1","9ºf,114,1,117,1","a.c,94,2","a.m,79,1","a0,66,1,69,1,108,1","a01,60,2,68,1,69,1,70,1,102,2,107,1,109,1,111,1","a02,60,1,68,1,70,1,102,1,107,1,111,1","a1,66,1,69,1,94,1,108,1","a11,60,2,68,1,69,1,70,1,102,2,107,1,109,1,111,1","a12,60,1,68,1,70,1,102,1,107,1,111,1","a2,66,1,94,1,108,1","a21,60,1,102,1","a22,60,1,102,1","a3,66,1,108,1","a31,60,1,102,1","a32,60,1,102,1","a41,60,1,102,1","a51,60,1,102,1","a5sl-1200.00,124,5","a5sl-1310.00,122,5","a5sl-30.00,123,5","a5sl-35.00,121,5","aa,9,1,92,1,94,1,95,3,96,3,97,1,121,1,123,1","aaa,12,1,13,1,16,1","abcdef,104,1","ability,30,1,31,1,94,1,107,2,109,1,111,2,113,1","aboutwcpe.php,23,4","abrasion,19,1,100,1","abrasive,94,1","abs,12,1,13,1,39,1,40,1,43,1,45,1","absolute,7,5,60,5,62,4,63,4,64,4,65,5,67,4,71,5,68,7,69,7,70,5,72,6,73,4,74,4,75,4,76,4,77,4,78,4,101,4,104,1,102,1,103,1,105,3,106,1,107,6,109,6,110,2,111,6,113,3","absorption,93,1,119,1","ac,85,1,81,1,82,1,83,1,84,1,86,1,91,1,94,16,98,1,99,2,107,1,109,2,118,1,111,1,114,4,124,5","acceleration,7,1","accept,94,2,118,1","acceptance,93,1,119,1","accepted,35,1,36,1,63,1,79,1","accepts,16,1","access,9,3,66,1,92,1,94,8,103,1,108,1","accessed,94,1","accessible,102,1","accessories,1,1,7,2,23,1,71,1,68,1,70,1,72,1,73,1,74,1,75,1,77,1,78,1,92,1,100,2,109,1,110,1,113,1","accessory,103,1,105,1,107,1,109,1","accessorydimensions,107,1","accomplished,92,1,94,1,103,1","accordance,79,1,92,1,94,1,119,1","according,67,1,106,1","accordingly,94,1","account,2,2,3,2,79,4,112,1","accounts,85,1,81,1,82,1,83,1,84,1,86,1,112,1,114,1","accuracy,12,3,13,1,15,1,16,1,68,1,69,1,92,1,94,6,95,1,96,1,101,1,104,1,103,1,105,1,106,1,112,1,121,1,123,2,124,5","accurate,7,5,13,2,15,8,60,4,62,4,63,4,64,4,65,4,67,4,71,5,68,4,69,4,70,5,72,5,73,4,74,4,75,4,76,4,77,4,78,4,87,1,91,1,94,1,98,2,99,1,107,1,109,1,110,1,111,1,113,1,124,1","accurately,93,1,107,1,109,1,110,1,111,1,113,1,119,1","accu-seal,1,4","acetal,39,1,40,1,45,1","achieved,107,1,110,1,113,1","achieves,105,1","acknowledge,98,1,124,1","acknowledged,94,1","across,94,2","acrylic,43,1,92,1,94,1","act,94,1","acting,55,1,70,1,90,5,91,1,94,1,107,2,108,5,109,2,111,2","action,8,1,48,1,47,1,85,2,81,2,82,2,83,2,84,2,86,2,88,1,90,2,91,4,93,1,94,1,118,3,114,2,115,1","activated,93,1,107,1,109,1,111,1,119,1","activating,87,1,98,1,124,1","active,7,1,26,3,27,1,29,1,30,1,31,3,32,3,33,3,34,1,35,1,36,3,37,4,38,3,39,2,40,1,71,1,72,2,85,1,81,1,82,1,83,1,84,1,86,1,94,2,101,1,102,4,103,1,105,2,106,2,107,6,108,1,109,2,110,2,111,6,113,1,114,1","activity,106,1,112,1","acts,104,1","actual,94,1,102,1","actuate,93,1,119,3","actuates,91,1","actuating,90,1,118,1,119,2","adaper,73,1","adaptation,103,1,114,1","adapter,66,1,73,1,74,1,94,3,101,1,102,1,107,3,108,3,109,5,111,5","adaptercableoptions,107,2","adaptor,92,2,94,2","adc,124,1","add,16,1,48,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,76,1,105,2,119,1,125,1","added,19,1,79,1,94,1,100,1,114,3,117,1","adding,94,2,111,1","addition,7,1,9,1,66,1,81,1,88,1,100,1,105,1,108,1,114,2,115,1","additional,62,1,65,1,67,1,71,1,69,1,72,1,78,1,79,1,94,2,98,1,100,2,103,1,105,2,106,1,107,2,109,2,118,2,110,4,111,2,113,3,119,1,122,1,124,1","additive,15,2","additives,37,1","address,2,1,3,1,24,2,25,6,61,2,78,7,80,2,92,1,94,2,103,4,105,9,112,8","addressed,94,1","addressing,105,1","adhesion,32,1,34,1","adhesive,1,1,14,1,18,2,114,1","adjacent,94,1","adjust,94,5,102,1","adjustability,66,1,108,1","adjustable,15,1,16,1,66,3,67,1,85,5,81,5,82,5,83,5,84,5,86,5,87,4,88,4,89,8,91,6,94,4,95,1,101,1,104,1,102,2,103,1,105,2,106,2,107,1,108,3,109,1,110,1,113,1,117,2,121,2","adjusted,94,5","adjusting,85,2,78,2,81,2,82,2,83,2,84,2,86,2,114,7,117,3","adjustment,15,1,60,1,84,1,91,1,94,4,102,1,108,1,114,4,117,2","adjustments,94,6,102,2,108,2","advance,79,2,94,4","advanced,66,2,101,1,102,2,108,3","advancing,94,1","advantage,93,1,94,1,119,1","advantages,68,1,69,1,70,1,111,1,114,1","adversely,94,1","advertised,94,1","advise,79,1","advised,94,1","aerosol,6,6,48,1,57,1,26,4,27,3,29,3,30,3,31,4,32,4,33,4,34,3,35,3,36,4,37,4,38,4,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1","aerosols,6,1","aerospace,23,1","aero-space,11,1","affect,54,1,88,1,94,1,114,1,115,1,121,1","affected,94,1","affecting,88,1,94,1,114,1,115,1","affixed,94,1","affords,26,1,27,1,32,1,34,1","afghanistan,25,2","africa,25,2","african,25,2","against,9,2,94,3,118,1,114,1","agencies,114,1","agency,9,1,85,1,81,1,82,1,83,1,84,1,86,1,92,1,114,1,119,2","agent,48,1,26,2,27,1,29,2,30,2,31,3,32,2,33,3,34,1,35,1,36,2,37,2,38,2,42,1,43,1,51,1,52,1,54,1,55,1,56,1,119,2","agents,35,1,36,1,37,1,54,1,93,1,119,1","agitated,94,1","ago,71,1,70,1,72,1,107,1,109,1,110,1,111,1,113,1","agreed,79,1","ahah,57,4","a-hah,6,1,57,2,61,1","aids,1,4","aihara-cho,107,1,109,1,110,1,111,1,113,1","air,10,2,22,1,93,3,94,1,119,5","aisi,111,2","alarm,9,1,15,3,63,1,92,3,93,1,94,48,98,4,99,7,101,2,119,6,124,12","alarms,9,2,16,1,92,3,93,1,94,12,119,2,124,2","albania,25,2","alc,94,1","alcohol,26,1,27,1","alert,93,1,119,1","algeria,25,2","align,94,1","alkaline,13,1,16,1","allen,104,1","all-metal,58,1","allow,60,1,66,1,94,2,99,1,103,1,105,1,107,1,108,2,111,1","allowed,72,1,79,1,94,3,102,3,113,1","allowing,10,2,11,1,32,1,34,1,91,1,95,1,96,1,97,1,109,1,122,1,123,1","allows,9,3,10,1,13,1,48,1,19,1,29,1,33,1,43,1,46,1,47,1,62,1,64,1,91,1,92,1,94,2,98,1,100,3,104,1,102,1,103,1,124,1","alloy,93,2,100,1,119,2","all-welded,95,1,96,1,121,1,123,1","almost,37,1,49,1,85,1,81,1,82,1,83,1,84,1,86,1,89,1,94,1,114,1,117,1","along,7,1,60,1,63,1,72,1,94,3,102,1,107,6,109,4,110,4,111,5,113,5","alows,92,1","alpha,124,2","already,94,2","alrm,94,2","alter,121,1,123,1,124,1","alternate,121,4,123,4","alternately,94,1","alternative,50,1,68,1,69,1,94,1,107,1,109,1","alternatives,27,1,29,1,30,1,34,1,35,1","although,119,1","aluminum,66,3,69,1,73,1,75,1,88,3,89,1,101,3,104,3,102,3,103,3,105,4,106,4,107,5,108,4,109,4,110,1,113,2,114,1,115,1,117,2","always,6,1,57,2,104,1,107,1,109,1","ambient,13,1,88,1,92,1,94,3,114,4,115,1,119,3","ambients,88,1,114,1,115,1","ambivalent,32,1,34,1","amcot,1,5,10,22","amcot-cooling-tower.php,10,4","amendments,121,1,123,1","america,92,2","american,25,2,79,1","amount,85,1,81,1,82,1,83,1,84,1,86,1,112,1,114,2","amox,19,1,100,1","amox®,100,4","amoxtm,100,5","amp,73,2,124,4","amplified,123,1","amps,89,2,91,1,94,4,114,6,117,2,119,18","amptek,1,1,19,20,100,6","amptek®,100,4","amptek-duotape.php,19,4","amptek-heat-tape.pdf,100,4","analog,7,6,60,3,66,11,71,24,68,5,69,4,70,5,72,2,74,2,78,6,98,1,99,3,102,24,107,19,108,31,109,16,110,6,111,25,124,6","analogandstart,109,6","analysis,9,1,92,1","ancestors,15,1","andorra,25,2","angeles,23,1","angola,25,2","anguilla,25,2","a-nickel,100,1","anodic,107,1,109,1,113,1","another,94,1,102,1","answer,87,1,104,1","antarctica,25,2","anticipated,32,1,34,1,79,1","anticipation,85,1,81,1,82,1,83,1,84,1,86,1,87,1,114,3","antigua,25,2","antilles,25,2","anti-microbial,15,2","anti-rust,6,2,58,18,59,20,61,1","anti-seize,97,4","anti-sieze,122,4","anti-stick,6,1,37,20,61,1","anything,49,1","anywhere,102,1","aom,74,2,108,1","apart,111,2,114,1","appear,94,4","appearance,54,1,119,1","appears,94,1","appendices,94,1","appendix,94,3","appliances,22,1","applicability,85,1,81,1,82,1,83,1,84,1,86,1","applicable,88,1,114,10,115,6","application,17,2,39,1,48,1,26,1,27,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,60,5,62,5,63,5,64,5,65,5,66,2,67,5,70,1,79,1,93,1,94,1,95,3,98,2,99,2,96,3,97,3,102,1,103,1,107,3,108,2,109,2,118,4,110,1,111,3,112,4,113,1,114,1,119,4,122,1,123,1","application.qxd,112,4","applications,8,1,9,2,11,1,14,5,17,1,18,5,19,5,20,1,41,1,43,1,45,1,49,1,64,1,71,2,68,1,69,1,70,3,72,2,75,1,87,1,88,2,92,2,94,1,95,1,99,1,96,1,97,1,101,3,104,4,102,4,103,4,105,3,106,2,107,6,108,5,109,7,110,2,111,10,113,3,114,9,115,2,117,2,119,1,121,2,122,1,123,3","applications.,20,4","applied,91,1,94,2,106,1,107,1,109,1,110,1,111,1,113,1","appllcatlons,118,1,119,1","apply,17,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,79,1,94,1,95,1,98,1,99,1,96,1,97,1,103,1,105,1,114,3,117,2","appr0x,119,1","appropriate,64,1,70,1,72,1,94,3,104,3,103,1,107,2,108,2,109,2,110,1,111,3,113,2,117,1","approval,85,1,79,1,81,1,82,1,83,1,84,1,86,1,103,1,114,1,119,1","approvals,9,1,92,1,94,1","approved,37,1,92,2,94,3,114,1,119,4","approx,9,1,20,1,107,2,114,3,119,1","approximate,88,1,94,1,105,1,114,12,115,4,117,3","approximately,91,1,95,1,96,1,114,1,121,1,123,1","aquatuff,1,1,13,14","arab,25,2","arabia,25,2","arc,60,2,63,2,94,18","arc4100,92,1","architecture,64,1","arcing,94,1","ard,102,1,109,1","area,10,1,19,1,62,1,64,1,93,1,94,2,100,1,104,1,119,1","argentina,25,2","arise,118,1,114,1,117,1,119,1","arizona,23,2,24,1","arm,77,1,90,1,94,2,107,6,118,1","armenia,25,2","armoloy,123,1","armor,58,2,95,2,96,2,97,2,123,1","armored,85,1,81,1,82,1,83,1,84,1,86,1,114,3,121,3,123,5","arms,94,2","around,94,1,114,1","arrange,79,1","arranged,79,1","arrangement,85,1,81,1,82,1,83,1,84,1,86,1,100,1,114,1","arrival,79,1,107,1,109,1,110,1,111,1,113,1","arrived,79,1","arrives,79,1","arrow,94,11","articulated,109,2","aruba,25,2","ascii,124,1","ashland,87,1,88,1,118,2,114,2,117,2,119,2","asia,92,1","asic,101,1","aspect,92,1","assembled,92,1,114,1","assemblies,17,2,95,1,98,1,99,1,96,1,97,1,118,1","assembly,17,2,73,2,85,3,81,3,82,3,83,3,84,3,86,3,88,1,89,2,90,1,91,1,92,1,100,1,118,1,111,2,114,7,115,1,117,2","assign,102,1","assigned,114,1","assignments,102,1","assist,55,1,112,1","assistance,7,2,23,1","assists,51,1","association,85,1,81,1,82,1,83,1,84,1,86,1,114,2,117,1","assuming,94,5","assumption,108,1","assure,90,1,118,1","asviewed,111,2","asviewedfrom,109,1","asynchronous,63,1,101,2,103,1","atkins,12,5,13,4,15,4","atkins-32322-econotemp.php,12,4","atkins-aquatuff.php,13,4","atkins-digital-pocket-thermometer.php,15,4","atkins-infrared-thermometer.php,16,4","atmospheric,58,1","atomization,46,1","attach,94,3","attached,7,1,94,2,109,2,114,2","attachment,77,3","attack,93,1,119,1","attempt,94,1","attempts,94,1","attention,20,1,107,1,109,1,113,1","attenuation,121,2,123,2","attractive,119,1","audion,1,4","auf,107,1,109,1,110,1,111,1,113,1","australia,25,2","austria,25,2","authority,112,1,119,2","authorization,79,2,94,1","authorize,112,1","authorized,17,1,23,1,24,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,95,1,98,1,99,1,96,1,97,1","auto,12,1,13,1,16,1,57,1,51,1,52,1,53,1,54,1,55,1,56,1,124,2","automatic,118,1","automatically,89,1,98,1,124,1","automation,67,2,68,2,69,2,92,3,104,1,103,1,106,3,107,1,109,1,111,1","automotive,11,1","availability,7,2,10,1,12,1,13,1,15,1,19,1,20,1,73,1,74,1,85,1,75,1,77,1,78,1,79,2,81,1,82,1,83,1,84,1,86,1,90,1,91,1,94,2","available,7,2,13,1,14,2,15,2,17,4,18,2,39,5,48,5,57,5,21,1,23,1,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,5,40,5,41,5,42,5,43,5,44,5,45,5,46,5,47,5,49,5,50,5,51,5,52,5,53,5,54,5,55,5,56,5,58,4,59,4,60,3,62,2,63,2,64,2,65,2,66,3,67,4,68,2,69,3,70,3,76,3,90,1,91,4,94,7,95,4,98,1,99,2,96,6,97,3,100,3,101,2,104,2,102,4,103,3,105,1,106,2,107,11,108,5,109,7,118,3,111,11,113,2,114,3,117,1,119,3,121,2,122,1,123,5,124,1","average,114,1","averaged,108,1","avg,16,1","avoid,94,1","avoids,48,1","away,94,2,107,3,111,3","awg,94,3,118,3,119,2","awh,19,1,100,1","awh-051-020d,19,1,100,1","awh-051-020dl,19,1,100,1","awh-051-020dm,19,1,100,1","awh-051-040d,19,1,100,1","awh-051-040dl,19,1,100,1","awh-051-040dm,19,1,100,1","awh-051-060d,19,1,100,1","awh-051-060dl,19,1,100,1","awh-051-060dm,19,1,100,1","awh-051-080d,19,1,100,1","awh-051-080dl,19,1,100,1","awh-051-080dm,19,1,100,1","awh-051-100dl,19,1,100,1","awh-051-100dm,19,1,100,1","awh-051-120dl,19,1,100,1","awh-051-160dl,19,1,100,1","awh-052-020d,19,1","awh-052-020dl,19,1","awh-052-020dm,19,1","awh-052-040d,19,1","awh-052-040dl,19,1","awh-052-040dm,19,1","awh-052-060d,19,1","awh-052-060dl,19,1","awh-052-060dm,19,1","awh-052-080d,19,1","awh-052-080dl,19,1","awh-052-080dm,19,1","awh-052-100d,19,1,100,1","awh-052-100dl,19,1","awh-052-100dm,19,1","awh-052-120d,19,1,100,1","awh-052-120dl,19,1","awh-052-120dm,19,1,100,1","awh-052-160d,19,1,100,1","awh-052-160dl,19,1","awh-052-160dm,19,1,100,1","awh-101-020d,19,1,100,1","awh-101-020dl,19,1,100,1","awh-101-020dm,19,1,100,1","awh-101-040d,19,1,100,1","awh-101-040dl,19,1,100,1","awh-101-040dm,19,1,100,1","awh-101-060dl,19,1,100,1","awh-101-080dl,19,1,100,1","awh-102-020d,19,1","awh-102-020dl,19,1","awh-102-020dm,19,1","awh-102-040d,19,1","awh-102-040dl,19,1","awh-102-040dm,19,1","awh-102-060d,19,1,100,1","awh-102-060dl,19,1","awh-102-060dm,19,1,100,1","awh-102-080d,19,1,100,1","awh-102-080dl,19,1","awh-102-080dm,19,1,100,1","awh-102-100dl,19,1,100,1","awh-102-100dm,19,1,100,1","awh-102-120dl,19,1,100,1","awh-102-160dl,19,1,100,1","awhb006,100,1","awh-d,19,1","awh-dl,19,1","awh-dm,19,1","az,23,1","azerbaijan,25,2","b1,118,1","b1­no,118,1","b2,118,1","b2­bottom,118,1","b4,118,1","b6­stud,118,1","baarstad,23,1","backlash,94,1","backlight,13,1,16,1","back-lit,16,1","backside,94,1","backup,92,1,94,1","backward,92,1,94,1","backwards,66,1,108,7","bag,1,13,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,18,1,39,1,48,1,57,1,19,1,20,1,21,2,22,1,23,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,71,1,68,1,69,1,70,1,72,1,73,1,74,1,85,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,84,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1,125,1","bahamas,25,2","bahrain,25,2","baked,91,1","balance,6,1,27,1,29,1,30,1,34,1,35,1,121,1,123,1","balanced,94,1","ball,73,2,75,2","ball-jointed,77,1,107,4","band,1,4,123,1","bandwidth,67,1,106,1","bangladesh,25,2","bank,112,3","bar,66,2,75,2,101,2,104,2,102,2,103,2,105,2,106,2,108,2,111,4,121,1,123,1","barbados,25,2","barbara,23,1","barber-colman,121,1,123,1","barbuda,25,2","barrett,23,1","barrier,48,1,47,1,58,1","base,7,1,66,1,67,1,101,1,104,1,102,1,103,1,105,1,106,2,108,1,118,1,119,1","baseball,97,4,122,4","based,11,1,79,3,94,5,95,1,96,1,97,1,108,2,122,1,123,1","base-tx,67,1,106,1","basic,9,2,85,1,81,1,82,1,83,1,84,1,86,1,92,6,94,2,99,1,100,1,101,1,102,1,103,1,105,1,106,1,114,2","basin,10,4","basis,21,1,108,2","batter,13,1","batteries,13,2","battery,12,1,13,1,16,1,59,1","baud,62,3,64,1,94,1,101,1,104,4,103,3,105,1,107,1,109,1,111,1,113,1,124,1","bear,114,1","bearings,107,2","because,85,1,81,1,82,1,83,1,84,1,86,1,89,1,91,1,93,2,94,1,117,1,119,2","beckhoff,106,1","become,15,1","becomes,94,2","beginning,101,4,104,4,102,4,103,4,105,4,106,4,107,8,108,4,109,1,113,1","begins,100,1","belarus,25,2","belgium,25,2","belize,25,2","bellows,91,3","bend,60,1,63,1,94,1","bendix,95,1,96,1,121,1,123,1","benefit,70,1,111,2","benefits,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,66,1,92,1,107,2,108,1,109,3,110,1,111,2,113,1","benin,25,2","ber,110,1,113,1","bermuda,25,2","bernardino,23,1","beside,101,2,104,2,102,2,103,2,105,2,106,2,108,2","best,35,1,36,1,37,1,60,1,62,1,63,1,64,1,65,1,67,1,92,4,94,1,102,1,107,2,109,1,110,1,111,1,113,1,114,1","better,6,1,11,1,19,1,26,2,27,2,71,2,72,2,94,1,95,2,96,2,97,1,100,1,122,1,123,1","between,6,1,7,1,13,1,63,1,72,2,85,1,81,1,82,1,83,1,84,1,86,1,94,5,101,3,102,12,107,8,108,2,109,5,118,1,110,1,111,9,113,4,114,2,119,2","beyond,94,2,102,1,107,1,110,1,113,1,114,3","bg,118,1","bhutan,25,2","bias,107,1,109,1,111,1","bi-color,104,1","billing,25,1,112,1","bimetal,90,1,118,1","bi-metal,15,1","binary,63,3,101,4","binder,100,2","biodegradable,57,1,51,1,52,2,53,1,54,1,55,1,56,1","bit,60,1,63,5,92,1,94,2,101,7,102,1,105,1,124,1","bits,63,3,94,1,101,3,124,1","bit-strobe,104,1","black,63,1,76,2,101,1,102,1,105,2,106,1,107,1,108,1,109,1,111,1,119,2,121,1,123,1","blade,94,1","blank,9,1,92,2,94,5,99,1,124,1","blanked,94,1","blanks,60,4,101,1,104,1,102,5,103,1,105,1","bldg,110,1,113,1","bleaching,114,1","blemishing,48,1","blend,32,1,34,1,35,1,36,1,54,1","blended,6,1,41,1","block,8,1,71,1,72,1,85,1,75,1,83,5,84,2,94,2,107,7,110,4,113,4,114,2","blocks,94,3,103,1","blow,95,1,96,1,97,2,122,1","blow-out,17,5","blows,88,1,114,1,115,1","blue,6,2,32,25,34,25,61,2,105,2,106,2,107,2,109,2,111,2,119,1","blvd,1,1,23,1,112,1","board,13,1,94,9,124,1","body,17,5,123,1","bolivia,25,2","bolts,94,1","bomb,1,1,6,8,32,14,34,14,35,14,36,13,61,4","bonded,11,1,95,1,96,1,97,1,122,1,123,1","boot,12,2","booths,119,1","bore,111,3","boron,123,1","boron-hardened,121,1,123,1","boron-hardening,96,1,123,1","bosnia,25,2","boss,114,1","both,7,1,9,1,17,1,60,1,66,1,90,1,91,1,92,1,93,1,94,3,102,3,105,1,108,2,118,1,117,1,119,2","botswana,25,2","bottom,9,1,17,1,60,2,61,1,62,2,63,2,64,2,65,2,66,1,67,2,92,1,94,3,95,1,98,1,99,1,96,1,97,1,102,1,118,1","bounce,114,1","bouvet,25,2","box,8,1,13,1,74,2,78,4,79,1,84,6,91,12,93,1,94,1,100,1,101,1,102,2,108,1,114,1,119,2","boxes,24,1,61,1,80,1,119,2","bracket,90,3,107,1,118,3,110,2,113,2,117,3","brackets,90,2,94,7,118,2","bradley,104,1","braided,19,1,100,6","braiding,100,1","brand,7,1,8,1,92,3,94,4","brands,92,3,95,1,96,1","brass,85,2,81,2,82,2,83,2,84,2,86,2,88,1,91,1,93,7,111,1,114,16,115,1,119,2","brazil,25,2,92,1","break,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,85,3,81,3,82,3,83,3,84,3,86,3,94,5,114,2","bridge,89,2,117,2","brightness,124,2","brings,109,1","brite,56,6","brite-force,6,1,61,1","british,25,4,92,1","broad,6,1,45,1,47,10,61,1","broad-spectrum,39,1,48,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1","brochure,6,1,24,6,61,4,80,6,118,1,121,1,123,1","bronze,117,1","brown,101,1,102,1,103,1,105,1,106,1,107,2,108,1,109,2,110,2,111,2,113,1","brownlee,1,4","brunei,25,2","bt,94,1","build,9,1,17,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,95,1,98,1,99,1,96,1,97,1,102,3,107,1","builder,5,4","builders,67,1,106,1","buildings,119,1","buildup,17,1","build-up,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,50,1","built,10,1","built-in,58,1,66,1,71,1,72,1,87,1,108,2,110,1","bulb,91,1","bulgaria,25,2","bundled,100,1","burkina,25,2","burst,11,1,17,8","burundi,25,2","bus,64,2,65,1,104,1,103,6,105,22,106,3","bushing,111,1","business,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,18,1,39,1,48,1,57,1,19,1,20,1,21,1,22,1,23,2,26,1,27,2,29,2,30,2,31,1,32,1,33,1,34,2,35,2,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,68,1,69,1,70,1,71,1,72,1,73,1,74,1,85,1,75,1,76,1,77,1,78,1,79,2,81,1,82,1,83,1,84,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,94,1,95,1,98,1,99,1,96,1,97,1,112,2,125,1","butt,22,3","button,9,1,16,1,17,1,39,1,48,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,61,1,62,1,63,1,64,1,65,1,66,1,67,1,68,1,69,1,70,1,76,1,92,1,93,1,94,4,95,1,98,1,99,1,96,1,97,1,103,1,105,1,125,1","button-head,101,1,102,1,108,1","buttons,99,3,124,3","buy,35,1,36,1","buyer,79,4,94,5","buyers,79,1","bybassing,74,1","bypass,103,1,105,1","byte,105,2","bytes,105,1","c.s.a,118,1","c02,119,1","c207,62,1,103,1","c-276,96,1,121,1,123,2","c3,118,1","c3­stainless,118,1","ca,1,1,10,1,16,1,39,1,48,1,57,1,23,3,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,68,1,69,1,70,1,71,1,72,1,76,1,89,1,90,1,93,1,112,1,121,1,123,1","cable,13,1,60,4,62,4,63,7,64,1,66,9,68,1,70,1,71,1,72,1,73,8,74,2,85,1,76,6,81,1,82,1,83,1,84,1,86,1,94,2,95,1,96,1,97,7,101,16,104,4,102,13,103,15,105,7,106,8,107,28,108,18,109,29,110,5,111,26,113,4,114,7,121,4,122,4,123,2","cableconnectoroptions,109,1,111,1","cables,7,1,66,1,73,6,74,5,75,4,76,8,77,4,78,4,101,3,104,1,102,4,103,1,108,7,122,1","cabling,78,4","cad,94,1","caicos,25,2","cal,92,1,94,12,98,1,121,6,123,7,124,1","calculate,72,1,107,1,109,1,111,1,113,1","caledonia,25,2","calibrate,92,1,94,1,121,8,123,8","calibrated,13,3,90,1,94,4,118,2","calibrates,94,3,98,1,124,1","calibration,9,2,12,1,13,4,15,1,92,4,94,47,95,2,98,3,96,1,114,2,117,1,121,3,123,1,124,3","calibrations,94,1","california,23,2,24,1","call,7,2,10,1,12,1,13,1,14,2,15,1,18,2,19,1,20,1,21,1,24,1,60,2,61,1,62,1,63,3,66,2,73,1,74,1,85,2,75,1,77,1,78,1,80,1,81,2,82,2,83,2,84,2,86,2,87,1,90,1,91,1,95,1,96,1,100,1","cam,103,1","cambodia,25,2","cameroon,25,2","campion,94,3","can&rsquo,7,1","canada,25,2,92,1,94,1,119,2","canadial,117,1","canadian,85,1,81,1,82,1,83,1,84,1,86,1,114,2,119,1","can-based,64,1","canbasic,62,1,103,12","canbus,7,2,62,11,64,1,78,2,104,2,103,20","canbus.these,104,1","cancel,79,1","cancellation,79,4","cancelled,79,2","can-fieldbus,62,1,104,1,103,1","can-field-bus,64,1","cannon,95,1,96,1,121,1,123,1","cannot,79,1,94,2,114,1","canopen,62,2,104,1,103,17","cans,39,13,48,13,57,13,26,12,27,12,29,12,30,12,31,12,32,12,33,12,34,12,35,12,36,12,37,12,38,12,40,13,41,13,42,13,43,13,44,13,45,13,46,13,47,13,49,13,50,13,51,13,52,13,53,13,54,13,55,13,56,13,58,13,59,13,61,1","cap,85,2,81,2,82,2,83,2,84,2,86,2,106,1,107,1,109,1,118,4,110,1,111,3,113,1,114,4","capabilities,15,1,66,2,108,2","capability,60,1,62,2,63,1,64,1,65,1,67,2,94,4,100,1,106,1,107,1,108,1,111,1","capable,9,5,92,1,101,1","capacitance,114,2","capacities,118,1","capacitor,94,1","capacitors,114,3","capacity,90,1,91,1,118,1","cape,25,2","capillary,95,1,96,1,97,1,121,2,122,1,123,7","captive,60,2,62,2,63,2,64,2,65,2,66,2,67,2","captive-sliding,66,1,75,3,101,5,104,4,102,5,103,5,105,4,106,5,107,10,108,7","captive-slidingmagnet,107,1","carbonize,38,1","card,9,1,72,3,79,2,94,3,113,4","cards,108,1","care,101,1,102,1,103,1,108,1,119,1","carefully,94,1","carnauba,6,1,50,10,61,1","carolina,92,2,107,1,109,1,111,1","carried,79,1","carrier,42,1,44,1,79,2,94,1,109,1,110,1,113,1","carrier&rsquo,79,2","carriers,45,1,94,1","carry,60,1,62,1,63,1,64,1,65,1,67,1","carrying,16,1,90,1,118,2","cart,1,1,2,1,3,1,4,1,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,2,17,1,18,1,39,2,48,2,57,2,19,1,20,1,21,1,22,1,23,1,25,1,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,47,2,49,2,50,2,51,2,52,2,53,2,54,2,55,2,56,2,58,2,59,2,60,1,62,1,63,1,64,1,65,1,66,1,67,1,68,1,69,1,70,1,71,1,72,1,73,1,74,1,85,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,84,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1,125,2","cart.php,4,4","carton,94,1","cartridge,8,5,60,2,62,2,63,2,64,2,65,2,67,2,84,4,85,4,81,5,82,12,83,5,86,4,87,5,88,4,91,4,101,1,104,1,102,1,103,1,105,1,106,1,108,1,114,3,115,1","cartridge-style,84,1,81,1,82,1,83,1,86,1","cary,107,1,109,1,110,1,111,1,113,1","case,16,1,39,5,48,5,57,5,26,3,27,3,29,3,30,3,31,3,32,3,33,3,34,3,35,3,36,3,37,3,38,3,40,5,41,5,42,5,43,5,44,5,45,5,46,5,47,5,49,5,50,5,51,5,52,5,53,5,54,5,55,5,56,5,58,5,59,5,87,1,89,4,92,3,94,9,118,1,117,5","cases,39,9,48,9,57,9,26,26,27,26,29,26,30,26,31,26,32,26,33,26,34,26,35,26,36,26,37,26,38,26,40,9,41,9,42,9,43,9,44,9,45,9,46,9,47,9,49,9,50,9,51,9,52,9,53,9,54,9,55,9,56,9,58,9,59,9,79,1","casing,9,1,10,1","cast,26,1,27,1,43,1,47,1","casting,39,1,40,1,50,1,59,1","castings,29,1,33,1,35,2,36,2","cat,106,2,117,1","catalog,1,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,18,1,39,1,48,1,57,1,19,1,20,1,21,1,22,1,23,1,24,7,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,61,4,62,1,63,1,64,1,65,1,66,1,67,1,68,1,69,1,70,1,71,1,72,1,73,1,74,1,84,1,85,1,75,1,76,1,77,1,78,1,79,1,80,7,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1,100,3,101,6,104,4,102,6,103,6,105,6,106,6,108,8,114,9,115,4,117,5,119,1,125,1","catalogreq.html,24,4","catalogreq.php,80,4","catalogs,24,2,80,1","catalyst,30,1,31,1","categories,119,2","category,70,1,68,1,69,1,76,1,118,1","cause,88,1,91,1,94,5,114,1,115,1","caused,94,1,119,1","causes,84,1,85,1,81,1,82,1,83,1,86,1,89,1,107,1,109,1,111,1,114,2,117,1","causing,89,1,107,1,109,1,111,1,117,1","caution,94,2","cayman,25,2","cc,94,10,95,2,96,2,121,1,123,1","cd,78,2,95,2,96,2,103,1,121,1,123,1","cd-rom,101,1,102,1","ce,9,3,12,1,13,1,16,1,66,1,70,1,71,1,72,1,92,6,94,3,101,1,104,1,102,1,103,1,105,1,106,1,107,2,108,1,109,2,118,1,110,2,111,2,113,2","ceiling,119,1","ceilings,119,2","cell,23,3","celsius,12,1,16,1,118,1","center,94,3,111,2","central,25,2","centrifugal,20,1","century,1,1","ceramic,12,2,13,3,19,1,100,2","cermaic,16,1","certain,79,1,86,1,88,1,91,1,108,1,114,4,115,1","certificate,103,1","certified,8,1,16,1,70,1,71,1,72,1,84,1,85,1,81,1,82,1,83,1,86,1,89,1,90,1,94,1,107,1,109,1,118,2,110,1,111,1,113,1,114,2,117,2","certify,13,1,112,1","cf,95,2,96,2,121,1,123,1","cfc,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1","cfm,10,1","ch,94,6","chad,25,2","chain,94,1,106,1","chains,15,1","challenging,7,1","chamber,9,1,20,2,92,1","change,84,5,85,5,78,1,79,2,81,5,82,5,83,5,86,5,87,1,89,2,92,1,94,10,104,1,102,1,107,1,109,1,118,2,110,1,111,1,113,1,114,11,117,4,119,2,124,2","changed,62,1,94,5,104,1,103,1,108,1","changeover,60,1,62,1,63,1,64,1,65,1,67,1","changes,9,1,79,1,88,1,91,1,92,1,93,2,94,11,102,1,108,1,114,1,115,1,119,2","changing,94,8,114,1","channel,60,1,66,1,70,4,68,4,101,1,104,1,102,8,103,1,105,1,106,1,107,4,108,1,111,4","channel2,70,1,68,1","channels,60,2,70,4,68,4,69,1,102,3,107,5,109,1,110,1,111,5,113,1","char,53,1,94,2","characteristics,32,1,34,1,84,1,85,1,81,1,82,1,83,2,86,1,90,1,92,1,118,1,114,1","characters,76,1","charateristics,15,1","charge,78,1,79,2,94,1","charges,79,5,94,1","chart,1,1,9,44,70,2,68,2,92,13,94,67,101,1,104,1,102,1,103,1,105,1,106,1,108,1,119,2","charts,92,2","chassis,94,2","check,78,1","checked,94,1","checking,98,1,124,1","checkout,39,1,48,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1","chemical,91,1,114,1,115,1","chemically,29,1,33,1","chemicals,91,1,93,1,114,1,115,1,119,1","chile,25,2","chiller,1,4,10,4","chillers,1,4","china,25,2,92,1","chino,23,1","chip,13,1,15,1","chips,20,1","chlo,94,1","chloride,114,1","choice,39,1,48,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,107,1","choices,108,1","choose,17,2,39,1,48,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,3,95,3,98,1,96,4,97,4,108,4","chooses,79,1","christmas,25,2","chrome,121,1,123,1","chrt,94,8","chsp,94,1","chup,94,1","cia,62,1,103,3","cia199902-301v30,103,1","circle,9,10,92,1","circlip,111,2","circuit,13,1,19,1,94,1,100,2,114,1,124,1","circuits,94,3,114,1","circular,9,9,10,5,92,1,94,2","circulated,94,1","circulation,66,1,108,1","circulations,66,3,68,1,108,9","circumstance,79,1","cispr,107,1,109,1,111,1","citri-quick,6,1,55,6,61,1","citri-scent,6,1,52,2,61,1","city,1,1,16,1,39,1,48,1,57,1,23,2,24,1,25,4,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,61,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,72,1,76,1,80,1,89,1,90,1,93,1,112,9","cjc,124,1","claim,94,1","claims,94,1","clamp,7,1,73,2,74,1,89,1,107,25,109,8","clamps,107,7,109,8,117,1","clarify,79,2","class,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,50,2,92,2,105,1,118,1,114,1,119,5","classic,97,3,122,2","clean,44,1,50,1,56,1,93,1,119,2","cleaner,6,1,57,20,51,18,52,19,53,18,54,18,55,15,56,19,61,7","cleaner-degreaser,57,1,51,1,52,1,53,1,54,1,55,1,56,1","cleanerfrom,55,4","cleaners,1,1,6,5,57,3,51,3,52,3,53,3,54,3,55,3,56,3","cleaning,6,4,57,3,20,1,51,2,52,2,53,2,54,3,55,2,56,2","clean-it,1,1,6,1,57,23,51,23,52,23,53,23,54,23,55,23,56,24,61,7","cleanout,20,1","clear,9,1,44,1","clearly,94,1,118,1","clevis,111,1","clincher,7,1","clip,94,2","clock,63,1,72,1,101,12,107,1,109,1,111,1,113,1","close,84,1,85,1,81,1,82,1,83,1,86,1,89,1,90,1,93,1,94,2,118,3,114,4,119,4","closed,94,4,108,4,118,1","closed-error,108,1","closed-loop,63,1,101,1","closely,93,1,119,1","closely-spaced,10,1","closer,114,1","closes,84,2,85,2,81,2,82,3,83,2,86,4,87,3,89,1,93,16,114,14,117,1,119,3","closing,118,1","cloth,1,1,14,26,18,9","cluster,20,4","cm,100,1,114,1","co,100,1,107,1,109,1,110,1,111,1,112,1,113,1","co2,93,1","coast,1,15,2,1,3,1,5,1,6,13,7,13,8,13,9,13,10,13,11,13,12,13,13,13,14,14,15,13,16,13,17,14,18,14,39,13,48,13,57,13,19,13,20,13,21,14,22,14,23,11,24,5,25,1,26,13,27,13,29,13,30,13,31,13,32,13,33,13,34,13,35,13,36,13,37,13,38,13,40,13,41,13,42,13,43,13,44,13,45,13,46,13,47,13,49,13,50,13,51,13,52,13,53,13,54,13,55,13,56,13,58,13,59,13,60,14,61,5,62,14,63,14,64,14,65,14,66,6,67,14,70,13,68,13,69,13,71,13,72,13,73,13,74,13,84,13,85,13,75,13,76,13,77,13,78,13,79,12,80,5,81,13,82,13,83,13,86,13,87,13,88,13,89,13,90,13,91,13,93,13,95,14,98,14,99,14,96,14,97,14,112,3,125,1","coat,6,1,46,10,58,1,61,1,100,1","coated,123,1","coating,6,1,29,1,33,1,58,1,61,1,109,1,107,1,113,1,119,1","coatings,88,1,114,1,115,1,123,1","coats,58,1","cocos,25,2","code,24,1,60,2,61,1,62,1,63,2,64,1,65,1,66,1,70,1,68,1,69,1,76,1,80,1,92,9,94,14,101,4,104,1,102,8,103,1,109,1,105,4,107,1,108,4,118,1,112,2,113,1,119,2,121,1,123,1","coded,93,1","codes,94,1,101,1,104,1,103,1,105,1,119,2,121,1,123,1,124,2","coding,119,1","coefficient,101,1,104,1,102,1,103,1,105,1,106,1","cold,92,2,93,8,94,4,119,1","collapsing,114,2","collar,111,2,117,1","collector,119,1","colombia,25,2","color,13,1,92,1,93,1,94,1,101,2,102,1,103,1,109,2,105,7,107,2,108,2,110,1,111,2,113,2,119,1","combination,94,1,119,1","combined,68,1,69,1,114,1","come,37,1,71,1,72,1,97,1,110,2,113,1,122,1","comes,9,2,60,1,63,1,109,3,107,3,110,2,111,3,113,2","command,105,1","comments,24,1,61,1,80,1","commerce,13,1","commercial,119,1","commercially,39,5,48,5,57,4,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,4,40,5,41,5,42,5,43,5,44,5,45,5,46,5,47,5,49,5,50,5,51,4,52,4,53,4,54,4,55,4,56,4,58,4,59,4,67,1,106,1","commissioning,66,1,108,1","commitment,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1","committed,15,1","common,7,1,92,2,93,1,94,7,119,1,121,3,123,3,124,2","comms,94,1","communicate,102,1","communicated,65,1","communication,9,1,60,1,62,1,63,1,64,1,65,2,66,5,67,1,94,2,101,1,102,2,103,1,109,2,106,1,107,2,108,5,111,1","communications,9,2,64,1,92,5,94,19,98,2,104,4,106,1,107,1,108,1,118,1,111,1,124,2","communicatons,94,1","comoros,25,2","compact,9,1,10,5,82,1,89,1,92,1,111,1,117,1","companies,92,1","company,24,1,25,2,61,1,80,1,94,17,100,1","comparable,7,1","compartment,13,1","compatibility,66,2,108,6","compatible,48,1,44,1,46,1,70,1,68,1,69,1,109,2,107,2,108,2,111,2","compensated,119,1","compensation,92,2,93,2,94,4,119,1","competitive,39,1,48,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1","complete,23,1,26,1,31,1,32,1,33,1,35,1,36,2,37,1,38,1,62,1,70,1,68,1,69,1,76,1,94,6,100,1,101,1,118,1,119,1","completed,79,1,94,2,103,2,105,1,118,1","completely,15,1,70,1,88,1,92,1,94,1,109,1,111,1,114,1,115,1,119,1","complexity,104,1","compliance,9,1,92,1,94,1","compliances,12,1,13,1","compliant,16,1,26,1,27,1,29,1,30,1,31,1,32,2,33,1,34,2,35,1,36,1,37,1,38,1,50,1,118,1","complies,35,1,36,1,94,3,103,1","comply,37,1","component,58,1,84,1,85,1,81,1,82,1,83,1,86,1,89,1,90,1,118,1,114,1,117,2","components,7,1,39,1,48,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,62,1,64,1,114,1","composites,41,1","compound,97,4,122,4","comprehensive,103,1","compression,39,1,40,1,114,2","compressors,118,1","comprised,84,1,85,1,81,1,82,1,83,1,86,1,114,1","compromised,94,1","compromises,6,1","computer,98,1","coms,94,2","concealed,119,3","concerning,104,1","concerns,6,1","condensate,58,1","condensation,101,1,104,1,102,1,103,1,109,1,105,1,106,1,107,1,110,1,111,1,113,1","condensing,124,2","condition,94,12,118,1,119,1","conditionaing,72,1","conditioning,22,1,60,1,71,1,94,1,101,1,109,1,107,1,110,1,111,1","conditions,7,1,8,1,9,2,10,2,11,1,12,1,13,2,14,1,15,1,16,1,17,1,39,1,48,1,57,1,18,1,19,1,20,1,21,1,22,1,23,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,5,67,1,70,1,68,1,69,1,71,2,72,2,73,1,74,1,84,2,85,2,75,1,76,1,77,1,78,1,79,2,81,2,82,2,83,2,86,2,87,1,88,1,89,1,90,1,91,1,93,1,94,4,95,1,98,1,99,1,96,1,97,1,101,3,104,1,102,2,103,1,109,2,105,2,106,1,107,2,108,5,110,2,111,2,112,1,113,2,114,5,119,1,125,1","conductive,19,1,100,2","conductor,22,2,74,3,100,1","conductors,94,1","conduit,84,1,94,9,114,2,119,1","conduits,114,1","confidence,26,1,31,1,32,1,33,1,35,1,36,2,37,1,38,1,59,1","configurable,9,1,94,3","configuration,9,3,17,1,60,1,62,1,63,1,64,1,65,2,66,1,67,1,92,3,93,2,94,6,95,1,98,1,99,1,96,1,97,1,100,1,104,1,103,4,109,1,105,1,107,1,108,2,119,1,124,1","configurations,7,1,9,1,17,1,60,1,62,1,63,1,64,1,65,1,66,2,67,1,95,1,98,1,99,1,96,1,97,1,100,2,101,2,104,1,102,3,103,1,105,1,106,1,107,2,108,3,118,1","configurator,9,2,92,2,94,2","configure,9,1,109,1,107,1,111,1","configured,94,10","configuring,9,1","confirm,25,1","confirmation,112,1","conform,94,1","conformance,94,1,103,1","congo,25,4","conn,95,1,96,1","connect,90,2,94,10,103,2,105,2,106,2,107,1,118,2","connected,71,1,72,1,94,6,98,1,100,1,104,1,103,1,108,1,110,2,114,1,124,1","connecticut,92,1","connecting,94,2,97,4,102,1,103,1,105,1,122,4","connection,60,3,62,1,63,1,64,1,65,1,66,3,67,1,71,1,72,1,74,7,84,1,76,3,78,3,94,3,101,3,104,2,102,3,103,2,109,5,105,2,106,2,107,5,108,13,110,1,111,4,113,5,114,1,117,1,118,1,119,1,121,1","connections,94,10,101,2,104,1,102,1,103,2,109,2,105,11,106,1,107,2,108,7,110,1,111,2,123,1","connectivity,9,1,92,1,94,1","connector,60,1,62,1,63,1,65,1,66,7,70,2,68,2,69,1,73,16,74,22,84,1,85,1,76,13,81,1,82,1,83,1,86,1,95,4,96,4,97,1,100,1,101,15,104,10,102,12,103,13,109,33,105,31,106,12,107,45,108,27,111,29,113,12,121,5,122,1,123,4","connectors,1,1,7,2,22,16,65,2,66,1,73,6,74,5,75,4,77,4,78,4,100,1,104,1,102,1,103,2,109,2,105,6,106,6,107,2,108,4,111,2,113,2","connectors.,21,4,22,4","connectortypes,109,1,111,2","connects,92,1,109,1,111,1","connrct,94,1","conscious,57,1,51,1,52,1,53,1,54,1,55,1,56,1","consequential,79,1,94,1","consider,94,1","considered,37,1,119,1","consistent,107,1,110,1,113,1","consists,17,1,105,1,107,1","constant,10,1","constants,13,1","constructed,10,1","construction,17,1,62,1,63,1,64,1,65,1,67,1,68,1,69,1,92,1,93,1,94,1,95,1,96,1,100,4,101,2,104,1,102,2,103,1,105,1,106,1,108,2,114,1,119,1,121,1,123,1","consult,84,2,85,2,75,1,81,2,82,2,83,2,86,2,91,1,94,1,108,1,113,1,114,4,115,1,117,1,118,1,119,2,121,4,122,1,123,3,124,1","consulted,119,1","consumption,60,1,62,1,63,1,64,1,65,1,67,1,70,1,68,1,69,1,92,1,94,1","contact,1,2,2,1,3,1,5,1,6,1,7,3,8,2,9,2,10,2,11,2,12,2,13,2,14,2,15,2,16,1,17,3,39,1,48,1,57,1,18,2,19,2,20,2,21,2,22,2,23,2,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,2,38,1,40,1,41,1,42,1,43,1,44,2,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,3,62,3,63,3,64,3,65,3,66,3,67,3,70,2,68,2,69,2,71,2,72,2,73,2,74,2,84,6,85,6,75,2,76,2,77,2,78,2,79,4,81,6,82,6,83,6,86,6,87,4,88,2,89,6,90,6,91,3,93,4,94,1,95,3,98,3,99,3,96,3,97,3,100,2,109,3,107,4,108,1,110,1,111,3,112,1,113,1,114,6,117,2,118,3,119,2,121,2,123,2,125,2","contactor,91,1","contacts,84,3,85,3,81,3,82,3,83,3,86,3,89,2,90,1,91,1,92,1,94,5,114,3,117,2,118,1,124,3","contained,94,1,109,3,107,1,111,1","container,88,1,114,1,115,1","containing,84,1,109,1,107,1,114,1","contains,26,1,31,1,32,1,33,1,36,1,37,1,38,1,41,1,42,1,50,2,101,1","contaminants,52,1,53,1,54,1,55,1,56,2","contamination,90,1,117,1,118,3","contents,39,1,48,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,94,1","contingency,114,1,117,1,118,1,119,1","continually,101,1","continue,94,1","continued,101,1,104,1,102,4,103,1,105,3,106,1,108,3","continues,70,1,109,1,107,1,111,1","continuous,7,1,71,1,72,1,92,1,101,2,104,1,102,1,103,1,109,1,105,1,106,1,107,1,108,1,110,1","contract,119,1","contractors,94,1","contracts,114,1","control,63,1,64,1,66,1,67,2,71,1,72,1,84,1,85,1,81,1,82,2,83,1,86,1,87,2,88,2,89,1,91,3,92,3,94,34,95,4,96,4,97,5,101,2,104,2,103,2,105,1,106,2,107,1,108,1,110,1,114,8,115,1,122,1","control.,90,4","controlled,88,1,114,7,115,1","controller,1,4,8,4,9,7,60,1,62,3,63,3,64,2,65,2,66,2,67,1,70,2,68,3,69,1,72,5,84,9,85,9,81,9,82,9,83,9,86,9,88,11,89,4,90,4,91,7,92,3,94,5,97,1,101,2,104,2,102,1,103,2,109,10,105,2,107,10,108,6,110,2,111,10,113,9,114,33,115,8,117,4,122,1","controller.the,104,1","controllers,8,10,24,1,60,1,84,9,85,9,80,1,81,9,82,13,83,9,86,9,87,15,88,6,89,9,91,10,109,1,107,1,108,3,111,1,114,12,115,2,117,2","controlling,9,5,92,1,93,1,119,1","controls,1,7,7,1,9,4,16,1,39,1,48,1,57,1,23,6,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,79,4,91,1,92,1,95,1,96,1,100,1,121,1,123,1","convenience,19,1,79,1,100,1","convenient,9,1,66,1,92,1,94,1,100,1,101,1,109,1,105,1,107,1,108,2,113,1","conventional,7,1,48,1,62,1,64,1,104,1","conversion,124,1","convert,104,1,103,1","converted,101,1","converter,78,4,101,3,102,2,124,1","cook,23,1,25,2","cooking,22,1","cool,55,1,94,8","cooled,10,1","cooling,1,5,10,16,20,10","cooper,12,5,13,4,15,4","cooper-atkins,1,4,12,9,13,11,15,12,16,15","copiers,118,1","copies,94,1","copper,22,2,94,1","copyright,94,1,100,1,109,1,107,1,110,1,111,1,113,1","cord,109,7,107,5,111,7","cordsets,7,1,73,2","cordsetsand,107,1","corner,94,3","corp,92,1","corporation,109,4,107,4,110,4,111,4,112,1,113,4","correct,94,3,112,1","correction,94,3","correctly,68,1,94,1,109,1,107,1,111,1,113,1","correspond,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,105,1","corresponding,84,1,85,1,81,1,82,1,83,1,86,1,94,3,114,1","corresponds,94,1,103,1,109,1,107,1,111,1","corrode,10,1","corrosion,58,2,59,3,86,6,88,1,91,3,94,1,114,3,115,2,117,1,119,1","corrosive,88,2,91,1,94,1,114,3,115,2","corrugated,13,1","cost,7,1,39,1,48,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,68,1,69,1,79,1,89,1,94,1,109,1,107,1,114,1,119,1","costa,25,2","cost-effective,104,1","costly,7,1,58,1","costs,11,1,24,1,61,1,70,1,79,1,80,1,93,1,94,1,95,1,96,1,97,1,111,1,122,1,123,1","costs...with,7,1","cote,25,2","could,88,3,91,2,94,3,108,1,114,4,115,3","count,94,1","counter,72,1,109,2,107,2,108,1,110,1,111,2,113,2","counterbore,73,1,75,4","counter-bore,111,2","counters,108,1","counties,23,2","country,24,1,25,2,61,1,80,1","coupled,67,1,94,1,106,1","coupling,8,1,86,12,87,1,88,2,93,7,114,3,115,2,119,1","cover,14,4,18,4,19,1,23,1,89,1,92,1,94,4,100,4,104,1,114,1,117,2,118,1,119,2","covered,94,1,100,4,106,1,110,1,113,1,114,1,117,1,118,1,119,1","covering,10,1","cp,94,2","crazing,48,1","created,91,1","creates,7,1,10,2","creating,7,1","credit,79,5,112,11","credit-application.pdf,112,4","crimp,100,1","criteria,110,1,113,1","criterium,66,1,101,1,104,1,102,1,103,1,105,1,106,1,108,1","critical,17,1,70,1,109,1,107,1,110,1,111,2,113,1,121,1,123,1","croatia,25,2","cross,108,6,117,2","crystal,44,1,66,1,68,1,108,1","cs,39,1,48,1,57,1,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,111,1","cs341-e,119,1","csa,84,1,85,1,81,1,82,1,83,1,86,1,89,1,90,1,92,1,94,1,114,3,117,1,118,1","ctin,107,1,111,1","ctrl,94,8","cuba,25,2","c-ul,9,1","culver,1,1,16,1,39,1,48,1,57,1,23,2,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,72,1,76,1,89,1,90,1,93,1,112,1","curing,49,1","current,7,3,60,2,66,5,70,4,68,5,69,3,87,1,89,1,90,2,91,2,92,1,94,6,101,1,104,1,102,4,103,1,109,8,105,1,106,1,107,9,108,12,110,2,111,9,113,2,114,4,117,2,118,2,119,2,121,2,123,2,124,2","currently,4,1,15,1,97,2,122,2","currents,114,1,115,1","cushioned,100,1","custom,9,1,69,1,79,1,100,1,102,1,108,3","customary,60,4,62,2,63,2,64,2,65,2,66,2,67,3,101,6,104,5,102,8,103,6,109,2,105,5,106,5,108,5","customer,2,4,3,4,25,1,62,1,66,1,92,3,104,1,103,3,109,2,107,3,108,1,111,3,114,1,117,2,118,1,121,1,123,1","customers,79,1,82,1,114,1","customized,102,1,103,2","cut,94,1","cutout,92,1,94,3","cutouts,92,2","cycle,7,2,26,1,31,1,32,1,33,1,36,1,37,1,38,1,62,1,64,1,72,2,90,1,104,1,103,2,109,2,106,2,107,2,111,2,113,2,118,1","cycled,94,1","cycles,89,1","cylinder,60,1,62,1,63,1,64,1,65,1,67,1,109,1,111,5","cylinders,70,1,101,2,104,1,102,1,103,1,105,1,106,1,108,1,111,4","cylinder-style,7,1,69,7","cyprus,25,2","cz,121,1,123,1","czech,25,2","d34,70,1,68,1,69,1,109,7,107,9,111,7","d34andd84,109,2,107,1,111,2","d51,64,1,74,2,104,4","d53,65,1,78,1,105,13","d56,67,1,106,7","d6,74,4,76,9,102,4,103,4,108,4,113,4","d60,60,1,62,1,66,1,73,2,74,2,76,5,102,4,103,5,109,2,107,2,108,2,111,2,113,4","d62,62,1,78,1,103,4","d63,65,1,74,3,78,1,105,12","d6f,76,1","d6m,76,1","d7,74,2,101,2","d70,63,1,74,2,101,4","d8,74,1","d80,74,1","d84,70,1,68,1,69,1,109,8,107,9,111,7","da,76,3,107,1","daf,76,1","daily,9,1","daisy,106,1","daisy-chain,105,1","damage,7,2,13,1,79,2,88,1,94,6","damaged,79,3","damages,79,1,94,4","damaging,20,1","damark,1,4","danaher,9,4,92,1","danger,93,1,119,1","daro,94,1","data,9,2,39,1,48,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,2,62,5,63,8,64,3,65,5,67,4,78,1,92,3,94,3,101,18,104,7,103,10,109,16,105,9,106,2,107,18,111,16,113,3,118,3","datasheet,19,1,84,1,85,1,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1","date,94,2,112,3","dates,79,1","day,91,1,118,1","days,9,1,16,1,39,1,48,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,79,4,89,1,92,1,93,1,94,2,95,1,96,1,112,1,125,1","db,94,2","dbs,92,1","dc,92,3,94,5,99,1,101,2,104,2,102,2,103,3,109,3,105,5,106,1,107,3,108,4,110,2,111,3,113,2,114,3,124,1","d-coded,106,3","de,66,2,108,1","dead,101,4,104,4,102,7,103,4,109,1,105,5,106,5,107,11,108,5,110,1,111,4,113,1","debris,20,1","dec,91,1,94,1","decade,94,1","decades,23,1","december,94,1","decided,94,1","decimal,94,5,108,2","decorating,32,1,34,1","decoration,32,1,34,1,43,1","decrease,89,1,117,1","decreases,91,1","decremented,94,1","dedicated,94,1","deenergized,94,2","de-energized,94,1,100,1","deep,94,1,114,1","default,16,1,92,2,94,3,103,1","defaulted,94,2","defect,79,1","defects,94,1","deficiency,94,1","define,104,1,118,1","defined,94,4,109,1,107,1","defines,94,1","definitions,94,1","degradation,30,1,31,1,38,2","degreaser,6,1,57,1,61,1","degree,12,5,13,6,68,1,69,1,73,4,92,2,94,1","degrees,114,3,118,1","delany,92,1","deliver,79,3","deliveries,79,1","delivering,12,1","delivery,79,4,118,1","dem,109,1,107,1,110,1,111,1,113,1","demanding,8,1,109,1,107,1","demands,17,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,95,1,98,1,99,1,96,1,97,1","demo,24,1,80,1","democratic,25,2","denmark,25,2","denotes,108,7","denoting,94,1","densities,19,1,100,1","density,19,3,100,4","dental,117,1","department,13,1,94,1","dependability,82,1,114,1","dependent,12,4,60,1,62,1,63,2,64,1,65,3,66,1,67,1,70,2,68,3,69,1,101,1,104,2,102,1,103,2,109,2,105,3,106,2,107,2,108,1,110,1,111,2,113,3","depending,13,1,60,1,63,1,66,3,76,1,93,1,94,1,95,1,96,1,97,1,101,1,102,4,108,4,119,2,122,1,123,1","depends,94,1,107,1,111,1","depleting,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,50,1","depress,94,17","depressed,94,2","depressing,94,6","depressions,94,2","de-pressurizing,60,1,62,1,63,1,64,1,65,1,67,1","dept,112,1","depth,9,2,92,5,94,1","described,60,1,94,1,102,1,103,1,109,1,107,1,111,1,114,1,117,1,118,1,119,1","description,12,1,13,1,14,1,15,1,16,1,39,1,48,1,57,1,18,1,21,1,22,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,71,1,72,1,73,4,74,1,84,1,85,1,75,1,77,1,78,1,81,1,82,1,83,1,86,1,87,1,88,1,89,1,92,1,94,4,100,1,101,2,104,1,102,3,103,2,109,4,105,2,106,2,107,5,108,2,110,1,111,6,113,1,114,3,117,1,118,1,119,1","descriptions,5,1","design,7,1,9,2,10,6,11,1,16,1,17,2,19,1,20,1,60,1,62,1,63,1,64,1,65,1,66,2,67,1,68,1,69,1,71,1,72,1,74,1,93,1,95,3,98,1,99,1,96,3,97,3,100,2,104,1,109,2,108,1,111,1,119,2,122,2,123,2","designated,94,1","designating,94,1","designation,94,6,101,1,102,1,108,1","designed,7,1,8,1,9,1,10,1,17,2,54,1,65,1,67,2,83,1,86,1,89,1,92,1,93,2,94,1,101,1,104,1,102,1,103,1,109,1,105,1,106,3,107,2,108,3,111,3,113,1,114,1,119,6","designing,8,1","design--no,92,1","designs,13,1,100,2","desirable,114,1","desired,9,1,17,1,35,1,36,1,60,6,62,1,63,1,64,1,65,1,66,3,67,1,70,1,68,1,69,1,76,1,94,4,95,1,98,1,99,1,96,1,97,1,104,1,102,5,108,1,114,1,117,2,118,2,119,1,121,1,123,1,124,2","desk-top-publishing,94,1","detailed,94,1,114,2","details,94,3,101,1,102,1,103,1,104,1,109,1,105,1,107,9,108,2,111,1,113,1,114,1,117,1,118,1,119,1","detect,119,1","detect-a-fire,1,1,8,5,93,22,119,15","detect-a-fire®,119,4","detect-a-fire-units,119,5","detected,7,1,65,1,94,4,101,1,102,1,103,1,104,1,109,1,105,1,107,1,108,1,110,1,111,1,113,1","detection,7,1,8,2,93,4,94,2,104,1,105,1,119,7,124,1","detector,8,4,93,4,109,1,107,1,111,1,119,2","detectors,8,6,93,13,119,5","detectors.,8,4","determine,94,3,110,1,111,1,113,1","determined,7,1,79,1,109,1,107,1,110,1,111,1,113,1","determines,94,1","determining,112,1","deterministic,67,1,106,1","deters,114,1","developed,70,1,71,1,72,1,109,2,106,1,107,2,110,2,111,2,113,2","development,66,1,67,1,106,1,108,1","deviation,60,1,70,1,92,2,94,2,102,1,109,2,107,2,111,2","device,64,1,68,1,69,1,84,1,85,1,81,1,82,1,83,1,86,1,92,2,93,2,94,4,101,1,104,3,105,1,108,4,114,2,119,10","devicenet,7,2,64,13,74,2,103,2,104,31","devices,8,1,62,1,68,1,69,1,93,5,94,3,103,1,104,3,119,6","dff,94,1","dfp450w,15,7","dgnd,105,2","di,66,2,108,1","dia,101,2,102,2,103,3,104,1,109,19,106,6,107,17,108,1,110,2,111,28,113,1,121,5,123,12","diagnostic,66,4,101,3,102,3,103,3,104,2,105,3,106,3,108,6","diagnostics,7,2,65,1,66,2,101,3,102,2,103,2,104,2,105,4,106,2,108,4","diagram,101,2,105,2,110,1","dial,84,2,85,1,81,1,82,1,83,1,86,1,114,6","diam,86,1","diameter,10,1,20,1,70,4,73,1,84,3,85,3,81,4,82,4,83,3,86,3,88,1,111,3,114,3,115,1,119,1","diamond,123,1","diaphragm,11,1,95,1,96,1,97,1,121,6,122,1,123,8","dib,74,2,108,1","dicg,92,1","die,58,1","diego,23,1","dielectric,19,1,100,1,101,1,102,1,103,1,104,1,109,1,105,1,106,1,107,1,110,1,111,1,113,1,117,1,118,1","dies,58,1,59,4","dif,16,1","difference,101,1","differences,118,1","different,63,1,99,1,102,1,105,2,114,1,117,1,119,1","differential,63,2,70,1,68,1,69,2,87,1,89,2,91,1,94,1,97,3,101,4,109,2,107,2,111,2,113,1,117,2,122,3","differential-expansion,114,1","difficult,114,1","digit,60,2,66,1,92,2,94,3,98,1,99,1,102,8,109,2,107,2,108,2,114,1,124,5","digital,7,5,9,11,12,7,15,13,66,11,70,2,68,3,69,2,72,7,74,2,78,1,92,11,94,4,98,11,99,10,108,10,111,1,113,3,124,1","digital-pulse,66,2,70,1,72,2,109,6,107,7,108,18,111,14,113,4","digital-pulseoutput,109,1,107,1,111,1","digitalstart,109,1,107,1","digitial,15,4","digits,94,6","dignostic,78,1","diluents,37,1","dim,118,2","dimension,109,2,107,8,111,3,114,2,117,2","dimensions,84,1,85,1,81,1,82,1,83,1,86,1,87,1,88,1,92,2,94,2,101,3,102,3,103,3,104,3,109,8,105,3,106,4,107,8,108,4,110,1,111,11,113,1,114,2,117,2,118,2,121,2,123,1,124,2","dimethyl-ether,26,1,31,1,32,1,33,1,36,1,37,1,38,1","din,60,1,62,2,63,1,65,1,66,1,76,1,101,2,102,2,103,2,105,3,108,5,113,3","direct,7,1,60,2,66,1,70,1,71,1,89,1,91,1,94,1,100,1,101,1,102,1,103,2,104,1,109,1,105,3,106,1,107,1,108,5,110,1,111,3,117,1","direction,10,1,60,2,101,1,102,4,105,1","directions,100,1","directly,17,1,62,1,71,1,72,2,92,1,94,1,102,1,103,1,104,2,109,3,107,3,110,1,111,3,113,1,114,2,119,1","dirt,7,1,20,3,107,1","dirty,52,1,55,1","dis,62,1,103,1","disable,94,2","disabled,94,2","disastrous,119,1","disc,8,1,90,20,118,9","disconnect,103,2,105,2","disconnected,94,1,105,1","discontinued,7,2,91,1","discover,79,1","discussed,94,1","disk,17,10,94,1,125,5","disks,1,1,11,1,17,12,95,1,96,1,97,1","disks.,11,4","disp,94,4","dispersion,10,1","displacement,7,4,58,1,60,7,62,6,63,6,64,5,65,7,66,1,67,6,70,4,68,5,69,5,71,4,72,4,73,4,74,4,75,4,76,4,77,4,78,4,101,4,102,4,103,7,104,2,105,6,106,5,108,1,110,1,113,1","display,9,1,92,4,94,72,98,6,99,5,101,3,102,3,103,3,104,2,105,3,106,3,108,2,124,17","displayable,124,1","displayed,70,1,68,1,69,1,76,1,94,39","displaying,103,1,105,1","displays,103,1,105,1","disposable,92,1,94,1","dissipates,58,1","dissolve,56,1","distacnce,111,1","distance,16,2,72,1,94,1,101,2,102,5,107,4,111,6,113,1","distances,111,1,119,2","distributed,107,1,110,1,113,1","distribution,10,1,19,1,94,1,100,1","distributor,17,1,23,1,24,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,94,1,95,1,98,1,99,1,96,1,97,1,100,1","distributors,1,4","disturbances,88,1,114,1,115,1","divided,94,4,114,1","divider,94,1","division,94,2,109,1,107,1,110,1,111,1,113,1","dj,76,2","djibouti,25,2","dk,76,2","dl,19,1,100,2","dm,19,1,100,2","do-all,6,1","document,103,1,109,11,107,14,108,1,111,11","documentation,78,4,109,1,107,1,111,1","documents,108,2","dominica,25,2","dominican,25,2","don,14,1,18,1,94,1","don&rsquo,9,1","door,9,1,92,2,94,5,109,1","double,100,2,101,1","down,94,36,101,1,103,1,104,1,106,1","download,6,1,9,3,19,1,71,1,72,1,84,1,85,1,78,1,79,1,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1","downloaded,9,1","downscale,94,4","downtime,7,1","down-time,50,1","downtime--no,7,1","downward,20,1","dp,65,1,105,1","dpos,94,2","dpp400w,15,7","dp-slave,105,1","drain,20,1,101,1,102,1,103,1,104,1,109,1,105,1,106,1,107,1,110,1,111,1,113,1","draining,60,1,62,1,63,1,64,1,65,1,67,1,88,1,114,1,115,1","draw,94,3","drawing,109,3,107,4,110,1,111,5,113,1","drawings,109,3,107,4,108,1,111,3","drawn,94,1","draws,10,1","drilled,111,2","drip,91,10","drive,92,1,94,1,109,1,107,1,110,1,111,1,113,1","driver,101,1","driving,71,1,72,1,110,1,113,1","drop,66,1,108,1,118,1","dry,6,2,10,1,42,10,46,10,61,2,93,1,107,1,119,1","drying,26,1,31,1,32,1,33,1,36,1,37,1,38,1,55,1,56,1,114,1","ds,114,4,115,4,117,4,119,4","ds-301,62,1,103,2","ds-406,62,1,103,2","dtpl,124,1","dual,9,1,19,1,60,2,62,1,65,2,91,7,94,6,98,2,100,2,102,9,103,3,109,3,107,7,111,7,124,3","dual-magnet,102,1,107,3,111,3","dualmagnets,107,1,111,1","dual-position,102,1","due,7,2,24,1,61,1,80,1,90,1,94,2,114,4,118,1","duns,112,1","duo,19,1","duo_clr_both.pdf,100,4","duo-tape,1,1,19,15,100,2","duo-tape®,100,6","duo-tapes,19,1","duo-tapes®,100,2","duplex,92,1","durability,109,1,107,1,110,1,111,1,113,1","durable,10,2,13,1,70,1,68,1,69,1,71,2,72,2,93,1,109,2,107,2,110,1,111,1,113,1,119,1","during,58,1,84,1,85,1,81,1,82,1,83,1,86,1,94,5,95,1,101,1,102,1,103,1,109,1,107,1,108,1,111,1,114,1,121,1","dust,7,1,94,1,119,2","duty,6,1,50,1,51,2,61,1,101,1,102,1,103,1,104,1,108,1","dyeing,114,1","e.g,105,2,111,1","e05,63,1","e101,67,3,106,3","e102,67,3,106,3","e18974,117,1,118,1","e19310,119,1","e20-3,39,1,40,18,61,1","e20-6,39,19,61,1","e21,43,18,61,1","e23,41,18,61,1","e25,45,18,61,1","e26,44,18,61,1","e28,46,18,61,1","e67237,92,2,94,2","e89599,119,1","ea,16,2,109,1","early,6,1","ears,94,3","earth,94,3,109,1,107,1,108,1,113,1","ease,9,1","easier,94,1","easily,58,1,92,1,102,2,108,1","east,25,2","easy,9,4,16,1,39,1,48,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,52,1,92,3,101,2,102,2,103,1,104,2,106,1,105,1,107,1,108,2,114,1","easy-to-read,12,1,13,1","eating,7,1","eatures,99,1","ecatalogbuilders,4,1","economical,10,1,57,2,20,1,68,1,69,1,82,1,93,1,117,1,119,1","economical.,10,4","economically,7,1,26,1,31,1,32,1,33,1,36,1,37,1,38,1","economy,7,5,27,1,29,1,30,1,34,1,35,1,70,5,68,6,69,6","econotemp,1,1,12,8","ecuador,25,2","edge,94,2,107,2,111,2","edibles,37,1","edition,94,2","eds,103,3,104,3","eeprom,92,1,94,2","effect,10,1,88,2,91,1,94,3,114,2,115,2","effective,17,1,39,2,48,2,26,1,27,1,40,2,41,2,42,2,43,2,44,2,45,2,46,2,47,2,49,2,50,2,60,1,62,1,63,2,64,1,65,1,66,1,67,1,68,1,69,1,89,1,95,1,98,1,99,1,96,1,97,1,104,1,109,1,107,1","effectively,39,1,48,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1","effects,88,1,114,1,115,1,121,1,123,1","efficient,10,2,26,1,31,1,32,1,33,1,35,1,36,2,37,1,38,1,97,1,122,1","efficiently,10,1","effort,79,1","efforts,66,1,108,1","egypt,25,2","eh,7,1,70,9,73,1,111,41","either,70,1,86,1,87,1,91,1,92,1,93,1,94,1,102,1,108,2,111,1,117,1,119,1","eject-it,1,1,6,5,39,23,48,23,40,23,41,23,42,23,43,23,44,23,45,23,46,23,47,23,49,23,50,24,61,12","ejector,7,1,56,1","el,7,1,25,2,70,4,68,13,109,4,107,48","elapsed,7,1,72,1,109,3,107,3,110,2,111,3,113,3","elastomeric,35,1,36,1","elastomers,49,1","electric,19,2,22,1,23,1,84,1,100,1,114,2,115,1,119,2","electrical,13,1,84,2,85,2,81,2,82,2,83,2,86,2,89,1,90,1,92,1,94,11,102,1,114,4,117,1,118,2,119,6,123,1","electricals,121,1,123,1","electrician,94,1","electrolysis,88,1,91,2,114,2,115,2,117,1","electrolytic,88,1,91,1,114,1,115,1","electromagnetic,109,2,107,2,110,2,111,2,113,2","electromechanical,94,1","electronic,66,2,101,2,102,3,103,3,104,3,106,2,105,3,107,1,108,2,111,1,121,1,123,1","electronics,7,1,23,1,60,1,66,3,68,2,69,1,71,1,72,1,95,1,96,1,97,1,101,6,102,5,103,5,104,6,106,6,109,4,105,3,107,3,108,10,110,1,111,2,122,1,123,1","element,1,2,19,7,21,11,68,1,87,1,90,1,100,9,109,4,107,3,110,3,111,2,113,2,114,3,118,1,119,1","elements,1,5,7,2,19,1,21,1,23,1,100,4","elementtwo,100,1","elevated,88,1,91,1,114,1,115,1","eliminate,94,3","eliminates,109,1,107,1,110,1,111,1,113,1,119,1","eliminating,62,1,64,1,88,1,93,1,104,1,114,1,115,1","email,2,1,3,1,23,4,24,1,25,2,61,1,79,1,80,1,112,2","e-mail,109,3,107,3,111,3,121,2,122,2,123,2,124,2","emanating,7,1","embossing,48,1","emc,66,1,101,1,102,1,103,1,104,1,106,1,109,1,105,1,107,1,108,1,110,1,111,1,113,1","emergency,17,1,103,1","emi,70,1,101,1,109,1,107,1,110,1,111,1,113,1","emirates,25,2","emission,109,1,107,1,110,1,111,1,113,1","emissions,66,1,92,1,94,1,101,1,102,1,103,1,104,1,106,1,105,1,108,1","emissivity,16,1","emplex,1,4","employees,112,1","empty,4,1","en,65,2,66,3,94,1,101,3,102,3,103,3,104,3,106,3,109,5,105,5,107,5,108,3,110,3,111,5,113,3","en50081-1,92,1,94,1","en50081-2,92,1,94,1","en50082-1992,94,1","en50082-2,92,1","en55022,92,1","en61010-1,92,1","enable,94,1,105,1","enabled,94,2","enables,66,3,67,1,106,1,108,3","enamel,91,1","encapsulating,50,1","enclosed,10,1,123,1","enclosure,9,1,92,2,94,2","enclosures,13,1,92,1","encode,60,7,62,2,63,2,64,2,65,2,66,2,67,2,70,2,68,2,69,2,101,4,102,9,103,4,104,2,106,2,109,2,105,2,107,2,108,4,111,2","encoded,63,1,101,1","encoder,62,1,101,1,103,2","encoders,92,2","encompasses,109,1,107,1,111,1","end,17,1,19,1,56,1,72,1,73,7,77,3,86,1,87,1,94,2,100,6,101,3,102,3,103,3,104,3,106,5,109,18,105,7,107,16,108,6,111,15,113,4,114,3","ends,109,5,114,1","energized,94,1","energy,93,1,119,1","engaged,94,1","engine,5,4","engineered,7,1,26,1,31,1,32,1,33,1,36,1,37,1,38,1","engineering,1,4,8,1,43,1,47,1,68,1,69,1,75,1,94,2,103,1,109,2,107,3,111,2,124,1","engineers,67,1,106,1","english,69,1,77,1","enhanced,7,2,66,3,101,1,102,1,103,1,104,1,106,1,105,2,108,4","enough,9,1,66,1,93,1,108,1,119,1","ensure,101,1","ensures,66,1,92,1,108,1","ensuring,10,1,15,1,90,1,109,1,118,1","enter,10,17,12,2,13,4,14,11,15,2,18,27,19,61,20,9,21,6,22,6,62,1,66,2,71,15,72,15,73,26,74,17,84,4,85,4,75,15,77,10,78,12,81,6,82,7,83,4,86,10,87,8,88,4,89,3,90,4,91,14,93,1,94,16,114,1,125,1","entering,94,1,109,1,107,1,111,1,113,1","entire,6,1,10,1,13,1,109,1,107,1,111,1","entirely,94,1","entry,109,1,107,1,111,1,113,1","environment,7,1,94,2,104,1","environmental,6,1,10,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,66,1,71,1,72,1,109,1,107,1,108,1,110,1,111,1,113,1,124,2","environmentally,57,1,51,1,52,1,53,1,54,1,55,1,56,1","environments,9,3,13,1,70,1,92,1,94,1,109,1,111,1,118,2","ep,7,1,41,1,70,4,68,13,77,4,109,4,107,58","ep2,7,2,71,5,72,8,77,2,110,10,113,16","ep2a-004,71,1","ep2a-006,71,1","ep2a-009,71,1","ep2a-012,71,1","ep2a-015,71,1","ep2a-018,71,1","ep2a-021,71,1","ep2a-024,71,1","ep2a-030,71,1","ep2a-036,71,1","ep2a-042,71,1","ep2a-048,71,1","ep2a-054,71,1","ep2a-060,71,1","ep2d-004,72,1","ep2d-006,72,1","ep2d-009,72,1","ep2d-012,72,1","ep2d-015,72,1","ep2d-018,72,1","ep2d-021,72,1","ep2d-024,72,1","ep2d-030,72,1","ep2d-036,72,1","ep2d-042,72,1","ep2d-048,72,1","ep2d-054,72,1","ep2d-060,72,1","epa,26,1,27,2,29,2,30,2,31,1,32,2,33,1,34,3,35,3,36,2,37,1,38,1,50,1","epoxies,41,1,50,1","epoxy,6,2,26,24,27,24,42,1,45,1,51,1,61,2,118,3","eps,71,4,72,4","equal,94,6","equally,114,1","equate,94,2","equates,94,2","equation,94,2","equatorial,25,2","equipment,1,26,2,1,3,1,5,1,6,1,7,3,8,6,9,6,10,6,11,6,12,6,13,6,14,2,15,6,16,6,17,9,39,6,48,6,57,7,18,2,19,6,20,7,21,2,22,4,23,13,24,1,25,1,26,6,27,6,29,6,30,6,31,6,32,6,33,6,34,6,35,6,36,6,37,6,38,6,40,6,41,6,42,6,43,6,44,6,45,6,46,6,47,6,49,6,50,6,51,7,52,7,53,7,54,7,55,7,56,7,58,6,59,8,60,3,61,1,62,7,63,7,64,7,65,7,66,7,67,7,70,6,68,6,69,6,71,6,72,6,73,2,74,2,84,6,85,6,75,2,76,6,77,2,78,2,79,13,80,1,81,6,82,6,83,6,86,6,87,6,88,6,89,6,90,6,91,6,93,6,94,4,95,7,98,7,99,7,96,7,97,7,112,3,114,3,117,2,118,4,119,1,125,2","equipment.,1,4,23,4,79,4","equipped,94,1,114,1","equivalent,94,2","er,7,1,69,11,73,3,77,5,109,33,111,1","eritrea,25,2","error,15,1,66,1,92,4,94,13,101,1,102,1,104,2,106,2,105,1,108,6,123,1","errorbit,63,1","errors,79,1,109,1,107,1,111,1,113,1","ers,102,1,109,1,107,1,111,1","er-series,69,4","es,106,2","e-series,7,2,70,3,68,4,69,2,71,1,72,1,73,3,74,2,76,1,109,22,107,39,110,2,111,27,113,2","e-seriesmodelehsensor,111,6","e-seriesmodelehsensoranalog,111,1","e-seriesmodelepandelsensors,107,1","e-seriesmodelersensor,109,6","essential,109,1,107,1","establish,70,1,109,1,107,1,111,1","established,79,1,112,1","establishes,71,1,72,1,110,1,113,1","establishing,112,1","establishment,79,1","estimated,79,2","estimates,79,1","estonia,25,2","etched,123,1","etg,106,1","ethercat,7,2,67,11,106,10","ethercat®,106,8","ethernet,67,4,106,9","ethiopia,25,2","eul,94,1","europe,92,1","euu,94,1","evaporate,26,1,31,1,32,1,33,1,36,1,37,2,38,1","even,7,1,10,1,13,1,63,1,101,1,102,1,124,1","evenly,100,1,107,1,110,1,113,1","event,79,1,111,1","events,108,1","everything,49,1,97,1,122,1","evident,9,1","evironmental,94,1","evolved,6,1","ex,122,4","exact,5,1","examination,79,1","example,60,5,62,2,63,2,64,2,65,2,66,2,67,2,69,2,94,1,98,1,99,1,102,4,107,1,111,1,114,1,117,1,118,1,119,1,121,1,123,1,124,2","exc,121,14,123,14","exceed,15,1,94,2,108,1,114,4,117,1,119,1","exceeded,94,1","exceeds,94,1","excellence,71,1,72,1,110,1,113,1","excellent,8,1,29,1,32,1,33,1,34,1,35,1,36,1,84,1,85,1,81,1,82,1,83,1,86,1,90,1,114,2,118,1","except,39,1,81,1,82,1,94,1,100,1,101,4,102,4,103,4,104,4,106,3,108,5,114,3,117,1","excepting,94,1","exception,79,1","exceptional,60,1,62,1,63,1,64,1,65,1,67,1,114,1","exceptions,92,1","excess,51,1,52,1,54,1,55,1,109,1,107,1,111,1","excessive,94,1,114,1","excessively,94,1","exchange,105,1","excitation,92,1,94,1,98,1,121,2,123,3,124,3","excluded,109,1,107,1,111,1","exclusive,94,2","excursions,119,1","excuses,6,1","execute,104,1","exerts,114,1","exhibit,26,1,31,1,32,1,33,1,36,1,37,1,38,1","exist,94,3,101,1,102,1,103,1,104,1,106,1,105,1,108,1","existing,2,1,3,1,74,1,94,4,95,1,96,1,121,1,123,1","exists,94,3","exit,73,8,74,8,76,7,94,1,100,2,101,2,102,2,103,2,109,12,105,3,107,12,108,2,111,12,113,2","expand,64,1,89,1,93,2,117,1,119,2","expandable,91,2","expanding,93,2,119,2","expands,89,1,100,1,114,1,117,1","expansion,87,1,89,1,100,1,114,4,117,1","expectations,94,1","expense,79,1,94,1","expenses,94,1","experience,7,1,68,1,69,1","experimental,114,1","explosion,93,1,114,1","explosion-proof,96,1,123,1","exposed,114,4,119,3","exposure,114,2,119,1","exposures,100,1","express,79,2","expressed,94,1","expressly,30,1,31,1,79,1","ext,121,2,123,2","extend,94,1,109,1,107,1,110,1,113,1","extendable,109,1","extended,66,1,84,2,85,2,75,1,81,2,82,2,83,2,86,2,94,2,109,1,108,1,112,1,114,15,115,3","extension,7,1,74,1,76,7,102,1,104,1,109,4,107,3,108,1,111,3,113,1,114,4","extensions,114,1","extensive,49,1,104,1","external,66,2,68,1,84,1,88,1,107,1,108,6,114,1,115,1,123,1","externally,101,1,102,2,103,1,104,1,106,1,105,1,108,1","extinguishant,119,2","extinguishants,93,1,119,1","extra,12,1,44,1,94,1","extras,7,1","extreme,84,1,85,1,81,1,82,1,83,1,86,1,88,1,114,5,115,1","extremely,13,1,68,1,69,1,95,1,96,1,97,1,101,1,122,1,123,1","extruder,17,1,121,1","extruders,17,1,95,1,96,1,97,1","extrusion,17,1,39,1,40,1,66,1,97,1,101,2,102,1,103,1,104,1,106,2,109,1,105,2,107,7,108,2,110,4,113,4,122,1","eyelets,118,1","f-#16,119,1","f-#18,119,1","f.d.a,37,1","f.o.b,112,1","f.s,101,2,109,2,107,2,111,2","f.s.&#132,70,2","f05,60,1,63,1,66,1","fabric,100,1","fabricating,37,1","face,9,1","facilitate,94,1,109,1,119,1","facilities,9,1,92,1","facility,7,1,10,1,119,1","facing,94,1","factor,94,1,119,1","factories,119,1","factory,9,1,13,4,71,1,72,1,84,3,85,3,81,3,82,3,83,3,86,3,87,1,92,1,93,1,94,5,101,1,102,5,103,1,104,1,109,2,107,2,108,3,110,1,111,2,113,1,114,6,117,3,119,5,121,5,122,1,123,4,124,1","faeroe,25,2","fahrenheit,12,1,16,1,118,1","fail,94,1","fails,94,1","failure,79,1,114,1","failures,90,1,118,1","falkland,25,2","fall,119,1","fallen,94,1","false,93,1,119,3","family,6,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,109,1,111,1","family.,6,4","fan,10,2","far,15,1","fascia,99,1,124,1","faso,25,2","fast,26,1,31,1,32,1,33,1,36,1,37,1,38,1,55,1,56,1,67,2,84,1,85,1,81,1,82,1,83,1,86,1,90,4,91,2,93,1,98,3,99,1,106,2,114,2,119,3,124,2","fast-cal,98,1,124,1","fasten,94,1","fasteners,59,1,94,1","fastening,109,1,107,1,110,1,111,1,113,1","faster,26,1,31,1,32,1,33,1,36,1,37,1,38,1,60,2,62,2,63,2,64,2,65,2,67,2,93,1,119,1","fastest,67,1,106,1","fat,114,1","fault,94,3","fax,1,2,2,1,3,1,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,39,1,48,1,57,1,18,1,19,1,20,1,21,1,22,1,23,5,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,72,1,73,1,74,1,84,1,85,1,75,1,76,1,77,1,78,1,79,2,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,1,92,3,93,1,94,2,95,1,98,1,99,1,96,1,97,1,100,1,109,3,107,3,110,3,111,3,112,2,113,3,114,1,117,1,118,1,119,1,121,2,122,2,123,2,124,2,125,1","fb,121,1,123,1","fc,74,1","fd1,108,1","fd2,108,1","fda,37,1","fe,108,1","feature,7,1,66,1,91,1,100,1,101,1,109,5,107,5,108,1,111,5,113,2,114,2,118,1","features,10,1,12,3,15,1,17,1,39,4,48,4,57,4,20,1,26,5,27,5,29,5,30,5,31,5,32,5,33,5,34,5,35,5,36,5,37,5,38,5,40,4,41,4,42,4,43,4,44,4,45,4,46,4,47,4,49,4,50,4,51,4,52,4,53,4,54,4,55,4,56,4,58,4,59,4,66,2,70,3,68,1,69,1,71,1,72,1,85,1,81,1,89,1,90,1,92,3,93,1,94,1,95,1,98,2,99,1,96,1,109,1,105,1,107,1,108,2,111,3,114,14,115,3,117,1,118,2,119,1,121,1,123,1,124,2","featuring,1,4,7,1,23,4,79,4","federal,25,2","federated,25,2","fee,66,1","feedback,9,1,66,1,67,1,98,1,99,1,101,1,102,1,103,1,104,1,106,2,109,2,105,1,107,1,108,1","feeding,94,1","feet,69,2,71,2,72,2,77,2,94,7,101,2,102,2,103,2,104,1,106,1,105,1,108,3,110,11,113,11,119,1","female,67,1,73,12,74,11,76,6,102,1,103,2,104,1,106,5,109,10,105,16,107,10,108,1,111,10,113,3","fenwal,1,17,8,31,84,20,85,20,81,22,82,23,83,20,86,26,87,17,88,20,89,18,90,18,91,18,93,23,114,6,115,1,117,2,118,7,119,2","fenwal&rsquo,8,1","fenwal-17000-thermoswitch.php,82,4","fenwal-17100-thermoswitch.php,81,4","fenwal-17200-thermoswitch.php,83,4","fenwal-17300-thermoswitch.php,85,4","fenwal-17800-thermoswitch.php,84,4","fenwal-18000-thermoswitch.php,86,4","fenwal-20000-thermostat.pdf,120,4","fenwal-20000-thermoswitch.php,91,4","fenwal-30000-thermostat.pdf,117,4","fenwal-30000-thermostat.php,89,4","fenwal-67000-thermoswitch.php,87,4","fenwal-controls.php,8,4","fenwal-detectafire.pdf,119,4","fenwal-detect-a-fire.php,93,4","fenwal-midget-thermoswitch.pdf,116,4","fenwal-snap-disc.pdf,118,4","fenwal-snap-disc.php,90,4","fenwal-thermoswitch-datasheet.pdf,114,4","fenwal-thermowell.php,88,4","fenwal-thermowell-datasheet.pdf,115,4","ferrite,107,2","ferrous,107,2,110,1,111,3,113,1","fewer,50,1","fg,121,1,123,1","fi,108,1","fiber,92,1,94,1","fiberglass,10,9,14,1,18,1,22,2,30,1,31,1","fidelity,26,1,27,1","field,7,3,9,1,15,1,23,4,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,73,5,78,3,92,3,94,3,101,3,102,14,103,1,109,8,107,8,108,2,110,2,111,8,113,2,117,1","fieldbus,62,1,65,1,104,2","field-installable,74,11","field-installed,66,1,104,1,105,2,108,4,113,1","fields,7,1,109,2,107,2,110,1,111,2,113,1","fifteen,103,2,105,1","figure,94,38,109,6,107,11,111,9,119,8","figure3,109,1,111,1","figure6,107,1","figures,94,1","fiji,25,2","filament,114,2,117,1","file,5,1,92,3,94,3,103,2,114,1,117,2,118,2,119,1","filed,94,1","files,78,1,103,1,104,1","fill,39,1,48,1,25,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,49,1,50,1,60,4,61,1,66,2,95,1,96,1,97,1,101,1,102,5,103,1,104,1,105,1,121,6,122,1,123,7","filled,30,1,31,1,118,1","filler,10,2","film,48,1,26,2,27,2,30,1,31,1,46,1,47,1,58,1,59,3","film-forming,30,1,31,1","filter,20,1,63,3,94,1,101,4","filtering,94,1","filters,94,1","find,9,1,22,2,94,1","finding,9,1,92,1","fine,1,4,23,4,27,1,29,1,30,1,34,1,35,1,79,4,90,1,100,2,118,1","finely,46,1","fingerprint,58,2","fingerprints,51,1,52,1,55,1","finish,26,1,27,1,54,1,87,1,91,1,119,1","finished,94,2","finland,25,2","fire,8,16,93,40,119,14","fires,119,1","firmly,94,1","first,6,1,39,5,57,4,25,2,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,4,40,5,41,5,42,5,43,5,44,5,45,5,46,5,47,5,48,5,49,5,50,5,51,4,52,4,53,4,54,4,55,4,56,4,58,4,59,5,79,1,94,13,100,1,109,1,107,2,111,2,119,3","fit,9,1,17,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,75,1,92,1,94,2,95,1,98,1,99,2,96,1,97,1,102,1,119,1","fitness,94,1","fits,111,1","fitted,68,1,109,1,107,1,111,1,113,1","fitting,84,1,81,1,86,1,87,2,91,8,119,3","fittings,114,1","five,12,1,103,1,105,1","fixed,90,7,93,1,94,1,110,1,113,1,119,5","flange,8,1,66,1,67,6,70,5,85,7,77,1,87,2,91,4,101,14,102,14,103,15,104,15,106,15,105,6,108,12,111,10,114,1,118,6","flash,94,3","flashed,124,1","flashes,94,6","flashing,101,2,102,2,103,2,104,2,106,2,105,2,108,6","flat,21,6,89,1,100,1,107,1,110,1,113,1","flat-faced,60,2,62,2,63,2,64,2,65,2,66,2,67,4,101,7,102,7,103,7,104,7,106,7,105,7,108,5","flex,7,6,60,1,62,1,63,1,64,1,65,1,67,2,101,2,102,2,103,2,104,2,106,2,105,1,121,1,123,1","flexibility,19,1,100,1,118,1","flexible,19,10,60,2,62,1,63,2,64,1,65,1,67,1,95,2,96,2,97,2,100,3,101,3,102,3,103,3,104,2,106,1,105,2,107,1,108,2,121,2,123,2","flex-style,60,1","flip,94,2","float,75,1,101,1,102,1,103,1,104,1,106,1,105,1,108,1,111,5","floating,60,1,62,1,63,1,64,1,65,1,66,3,67,1,71,1,72,1,73,1,75,1,102,1,105,5,110,2,113,2","floats,7,1,75,1","flourelastomer,111,1","flow,10,1,20,1","fluid,95,1,96,1,97,1,111,2,114,1,122,1,123,1","fluids,88,1,114,1,115,1","fluorocarbon,119,1","fluoroelastomer,101,3,102,3,103,3,104,3,106,3,108,3","fluorofilm,6,1,46,10,61,1","fluoropolymer,50,1","flush,93,5,94,1,119,2","fm,9,1,92,1,94,1,108,3,119,5","fm1,66,1,108,1","fm2,66,1,108,1","fnpt,20,1","fob,9,1,10,1,16,1,17,1,39,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,72,1,76,1,79,1,87,1,88,1,89,1,90,1,93,1,95,1,98,1,99,1,96,1,97,1,125,1","follow,93,1,94,1,103,1,105,1,119,1","followed,57,1,94,2","following,66,1,94,7,101,1,103,3,104,2,109,1,105,3,107,1,108,1,111,1,113,1,121,1,123,1,124,2","follows,60,2,93,1,94,3,101,1,102,2,114,1,117,1,119,1","food,6,4,9,1,15,4,39,11,23,1,37,6,40,11,41,1,42,1,43,1,44,2,45,11,46,1,47,1,48,1,49,1,50,1,56,1,61,4,92,1,114,1,117,1,118,1","foot,21,1,66,4,69,1,73,2,101,1,102,1,103,1,104,1,106,2,105,2,108,1,110,2,113,2","force,20,1,56,6,114,2","forces,7,2,88,1,114,1,115,1","forcibly,94,1","fork,22,1","form,6,1,24,5,61,5,75,1,80,5,94,5,118,2","format,9,2,60,1,62,1,63,4,64,1,65,2,67,3,70,1,68,1,94,1,101,5,106,2,109,1,105,1,107,1,108,3,111,1,113,1","formats,103,1,105,2","forming,39,1,26,1,27,1,30,1,31,1,40,1,100,1,109,1,107,1","forms,29,1,33,1,109,1,107,1,118,1","formula,42,1,44,1,45,1,58,1","formulas,57,2,51,2,52,2,53,2,54,2,55,2,56,2","formulated,57,1,29,1,30,1,31,1,32,1,33,1,34,1,38,1,51,1,52,1,53,1,54,1,55,1,56,1","formulation,35,1,36,1,38,1","formulations,6,7,39,4,57,4,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,4,40,4,41,4,42,4,43,4,44,4,45,4,46,4,47,4,48,4,49,4,50,4,51,4,52,4,53,4,54,4,55,4,56,4,58,4,59,4","forstart,109,1,107,1,111,1","forth,94,3","forward,70,1,92,1,94,1,109,2,105,1,107,2,108,2,111,2","forward-acting,60,1,63,3,101,3,102,1,107,1,111,1","forwardorreverseacting,109,1,107,1,111,1","found,26,1,31,1,32,1,33,1,36,1,37,1,38,1,94,1,101,1","foundation,104,1","fountains,114,1","four,60,1,62,1,63,1,64,1,65,1,67,1,92,1,94,3,103,3,107,1,114,1,119,1","four-digit,9,1","frame,91,5","france,25,4,92,1","free,6,2,20,2,61,1,94,2","freeing,35,1,36,1,59,1","french,25,6","freq,66,1,68,1,108,1","frequencies,109,1,107,1,111,1","frequency,68,1,90,1,110,1,113,1,118,1","frequent,7,1","fresh,52,1,55,1,111,1","friction,107,1","friday,23,1,79,1","front,9,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,73,1,75,1,92,1,94,2,99,1,101,1,102,1,103,1,104,1,106,1,105,1,107,2,108,1,111,4,124,2","frozen,59,1","fryers,114,1","fso,95,4,96,4,121,14,123,17","ft,21,1,22,90,73,2,76,6,101,4,100,1,102,4,103,4,104,1,106,1,105,1,108,9,110,1,111,1","ft.-lbs,66,1","fulfill,101,1,103,1,104,1,105,1","full,60,2,62,2,63,2,64,2,65,2,66,2,67,3,70,2,68,3,69,2,94,1,102,2,103,2,104,2,106,2,109,2,105,2,107,6,108,3,110,3,111,4,113,3,114,2,117,1,121,1,123,2","full-featured,98,1","fully,7,1,66,1,70,1,68,1,69,1,89,1,94,3,109,2,107,2,108,1,111,2,117,1","fullyindustrial,113,1","fully-industrial,70,1,71,1,72,1,109,1,107,1,110,1,111,1","function,9,1,70,1,68,1,69,1,73,1,74,1,75,2,77,1,78,1,94,1,98,1,101,3,102,3,103,3,104,3,106,1,109,3,105,5,107,3,108,5,110,1,111,3,113,2,124,1","functional,9,1,94,1,119,1","functionality,9,1,62,1,64,1,66,1,92,2,103,1,104,1,105,1,108,1","functions,7,1,60,1,62,1,63,1,64,1,65,2,67,1,78,1,92,2,94,1,102,1","furnaces,9,1,22,1,92,1","furnished,92,1,114,1,117,1","further,94,1,112,1,113,1,114,1,117,1,118,1,119,1","futuna,25,2","future,25,1,94,2","fz,121,1,123,1","g21-411,22,1","g21-412,22,1","g21-423,22,1","g21-425,22,1","g21-427,22,1","g21-442,22,1","ga,21,1,22,14","gabon,25,2","gage,11,1,95,2,96,2,97,2,123,2","gain,94,1","gambia,25,2","gap,107,4,110,1,113,1","gas,11,1","gases,88,2,91,1,114,2,115,2","gate,63,1,101,1,108,6","gatesandvalvecontrol,111,1","gauge,94,1,100,1,106,1,121,2,122,2,123,2","gauging,67,1,106,1","gb,121,1,123,1","general,92,1,94,2,121,1,123,2","generate,107,1,109,1,111,1","generated,107,1,109,1,111,1","generates,72,1,107,1,109,1,111,1,113,1","generation,7,1,15,1,66,2,70,1,68,1,69,1,107,2,108,1,109,2,111,2","gentran,121,1,123,1","georgia,25,4","germany,25,2,92,1,107,1,109,1,110,1,111,1,113,1","getting,97,4,122,4","gfk,107,2","gh,7,1,66,5,77,1,108,14","ghana,25,2","gibraltar,25,2","give,19,1,38,1,98,1","given,100,1,103,1","gives,114,1","glad,17,1,60,1,61,1,62,1,63,1,64,1,65,1,66,1,67,1,94,1,95,1,98,1,99,1,96,1,97,1","gland,107,4,109,4,111,4,114,2","glass,19,1,100,1","glassware,100,1","gluing,47,1","gmbh,107,1,109,1,110,1,111,1,113,1","gn,121,1,123,1","gnd,101,1,106,1","goes,94,4","good,7,1,41,1,94,2","goods,79,1","gp,1,2,11,21,17,14,66,5,77,4,95,15,98,15,99,15,96,16,97,21,108,10,121,2,122,6,123,4,125,1","gp50,11,4,17,8,95,8,98,8,99,8,96,8,97,8,125,4","gp50-1211-1254-indicator.pdf,124,4","gp50-1211-indicator.php,99,4","gp50-1254-indicator.php,98,4","gp50-1310.pdf,122,4","gp50-30-31.pdf,123,4","gp50-30-31-transducer.php,96,4","gp50-35.pdf,121,4","gp50-35-transducer.php,95,4","gp50-melt-pressure-kit.php,97,4","gp50-pressure-transducers.php,11,4","gp50-rupture-disk.php,17,4","gp50-rupture-disk-order.php,125,4","gpm,10,1,20,8","gp-series,7,1","gq,121,1,123,1","grade,6,3,39,11,37,5,40,11,41,1,42,1,43,1,44,1,45,11,46,1,47,1,48,1,49,1,50,1,61,3","gradient,66,1,70,1,68,2,69,1,72,1,107,3,108,1,109,3,111,2,113,3","gradients,119,1","graduations,114,1","gramatech,1,4","grams,114,12,115,4","grand,17,1,95,1,98,1,99,1,96,1,97,1,121,2,122,2,123,2,124,2,125,1","gravity,111,1","gray,63,3,91,1,101,5,102,1,103,1,107,1,108,1,109,1,111,2,113,1","grease,51,1,52,1,55,1","greases,53,1,56,1","great,114,1,115,1,118,1","greater,13,1,16,2,66,2,89,1,92,1,94,7,101,1,102,1,103,1,108,3,110,1,113,1,114,4,117,2","greece,25,2","green,92,2,94,9,98,1,99,1,101,4,102,3,103,3,104,3,106,4,105,5,107,2,108,2,109,2,110,2,111,1,113,1,119,1,124,4","greenland,25,2","grenada,25,2","grenadines,25,2","grey,101,1","grime,54,1","grooves,107,1,109,1","ground,39,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,92,1,94,13,101,3,102,3,103,4,104,3,106,2,105,7,107,6,108,6,109,6,110,3,111,5,113,5,114,1","grounded,94,1","grounding,94,1,101,1,102,1,104,1,107,5,108,4,109,5,110,1,113,4","group,26,1,31,1,32,1,33,1,36,1,37,1,38,1,92,1,106,1,119,1","groups,94,2,119,4","growth,93,2,119,2","gs,95,1,96,1,123,1","gsd,105,1","gsd-file,65,1,105,1","g-seires,74,1","g-series,7,3,66,15,74,1,76,1,78,8,101,1,102,1,103,1,104,1,108,47","gt,121,1,123,1","gu,95,1,121,2","guadeloupe,25,2","guam,25,2","guarantee,10,1,15,1","guarantees,10,1,79,1,107,1,109,1,110,1,111,1,113,1","guatemala,25,2","guiana,25,2","guide,9,1,17,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,95,1,98,1,99,1,96,1,97,5,118,1,121,2,122,5,123,3,124,2","guidelines,94,2","guinea,25,6","guinea-bissau,25,2","gurnee,92,1","guyana,25,2","gv,121,1,123,1","gw,121,1,123,1","gx,121,1,123,1","gz,121,1,123,1","h1­no,118,1","h4,118,2","h4­#6,118,1","h5­#8,118,1","h6,118,1","h6­#6,118,1","haiti,25,2","half,1,1,92,1,119,1","half-duplex,94,1","hand,6,1,12,4,16,4,57,1,78,2,94,4,119,1","hand&rdquo,57,1","handheld,102,5,103,4,105,3,108,1","handle,94,1","handling,12,1,79,1,101,1,102,1,103,1,107,1,108,1,109,1,111,1","hanging,66,1,108,1","happen,94,1","hard,21,1,22,1,66,1,107,2,108,1,123,1","hardware,7,2,62,1,64,1,65,1,73,2,77,1,92,1,94,10,103,1,104,1,109,2,118,5","hard-wire,66,1","hard-wired,66,1,108,2","harmless,119,1","harsh,9,3,13,1,71,1,72,1,92,1,101,1,107,1,109,1,110,1,111,1,113,1,118,2","hartford,94,3","hastelloy,96,1,121,1,123,2","hat,97,4,122,4","having,67,1,69,2,94,1,106,1,109,1,111,3,119,2","hazardous,119,7","haze,48,1","hcfc,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1","hd,123,1","he,94,1","head,7,1,8,4,17,4,60,15,66,2,70,1,68,1,69,1,85,6,81,8,83,5,86,11,87,2,88,6,93,28,101,5,102,19,103,5,104,5,106,2,105,4,107,2,108,2,109,1,110,1,111,10,113,1,114,18,115,8,119,4","headquarters,92,1","health,98,2,124,2","heard,25,2,85,1","heart,93,5,119,1","heat,1,4,9,1,14,5,16,4,18,5,19,5,21,4,26,1,27,1,29,1,30,1,31,1,33,1,38,1,87,1,92,1,93,1,94,8,100,1,119,1","heated,87,1,89,1,100,1,117,1,119,1","heater,8,4,87,4","heaters,1,5,16,1,39,1,57,1,19,1,21,1,22,1,23,5,24,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,79,4,80,1,89,2,100,1,114,2,117,1","heating,1,6,19,25,21,1,22,1,23,1,100,5,118,1","heavier,11,1,95,1,96,1,97,1,122,1,123,1","heavy,6,1,19,1,50,1,51,2,61,1,101,1,100,6,102,1,103,1,104,1,108,1","height,68,1,92,1,107,1,118,1","held,12,4,16,4,78,2","helena,25,2","heliarc,88,1,114,1,115,1","help,17,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,95,1,98,1,99,1,96,1,97,1,107,1","helpful,23,1","helps,66,1,94,1,108,1,114,1","hereby,112,2","herein,94,1","hermetically,93,1,119,1","hermetically-sealed,70,1,111,1","hex,8,1,17,2,60,3,62,3,63,3,64,3,65,3,66,3,77,1,81,8,87,1,88,3,93,14,101,1,102,1,105,11,108,1,109,2,114,3,115,3,121,1,123,2","hexadecimal,66,4,103,1,105,1,108,9","hexagonal,114,3,119,1","hi,22,4,94,7","high,1,1,7,3,8,2,9,2,12,1,16,1,19,8,21,8,22,14,46,1,53,1,56,1,63,2,64,1,65,1,67,2,70,1,68,2,69,2,82,2,89,1,90,1,91,1,92,7,94,18,95,1,98,1,101,6,96,1,100,11,102,4,103,4,104,5,106,3,105,1,107,1,108,7,109,2,110,2,111,1,113,2,114,5,117,3,118,1,124,2","higher,60,1,62,1,63,1,64,1,65,1,66,1,67,1,76,2,94,2,95,1,96,1,108,3,114,1,121,1,123,1","highest,66,1,108,1","high-expanding,84,1,85,1,81,1,82,1,83,1,86,1,114,1","highly,7,9,13,2,26,2,27,1,31,1,32,1,33,1,35,1,36,2,37,1,38,1,60,8,62,8,63,8,64,8,65,8,67,8,70,8,68,9,69,9,71,9,72,9,73,8,74,8,75,8,76,8,77,8,78,8,93,1,119,1","high-performance,101,1","high-precision,104,1","high-pressure,70,1,111,2","high-priced,95,1,96,1","high-speed,65,1,67,1,106,2,107,1,109,1,111,1","highway,64,1","hills,23,1","hints,114,1","hit,9,1,16,1,17,1,39,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,56,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,2,67,1,95,1,98,1,99,1,101,1,96,1,97,1,102,1,103,1,104,1,106,1,105,1,107,1,108,1,109,1,110,1,111,1,113,1","hi-temp,22,5","hj,123,1","hl,94,2","hold,13,1,15,2,16,1,98,1,124,1","holding,20,2","hole,82,2,87,1,94,1,97,1,114,4,122,1","holes,10,1,73,5,75,10,107,2,109,1,110,2,111,3,113,1,118,1","hollowshaft,92,2","home,1,3,2,1,3,1,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,2,17,1,39,2,56,2,57,2,18,1,19,1,20,1,21,1,22,1,23,1,24,1,25,1,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,47,2,48,2,49,2,50,2,51,2,52,2,53,2,54,2,55,2,58,2,59,2,60,1,61,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,72,1,73,1,74,1,84,1,85,1,75,1,76,1,77,1,78,1,79,1,80,1,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,94,7,95,1,98,1,99,1,96,1,97,1,125,1","homogeneous,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1","honduras,25,2","hong,25,2","honor,79,1","hoods,119,1","hookup,21,4,22,23","hook-up,1,1,22,4","horizontal,90,1,93,10,107,3,108,2,118,7,119,5","horizontally,93,1,94,1,119,1","hot,6,1,14,5,18,5,53,1,54,3,61,1,94,4,114,1,117,1","hour,92,1,114,6","hours,1,1,7,1,8,1,9,1,10,1,11,1,12,2,13,1,14,1,15,1,16,1,17,1,39,1,56,1,57,1,18,1,19,1,20,1,21,1,22,1,23,2,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,72,1,73,1,74,1,84,1,85,1,75,1,76,1,77,1,78,1,79,2,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,94,9,95,1,98,1,99,1,96,1,97,1,125,1","housing,7,1,10,1,12,1,13,1,60,3,62,3,63,3,64,3,65,3,66,6,67,3,70,2,68,4,69,1,84,1,85,1,77,1,81,1,82,1,83,1,86,1,91,3,93,8,101,12,102,11,103,9,104,10,106,11,105,8,107,8,108,13,109,8,110,1,111,3,113,1,114,1,121,2,123,2","housings,60,1,62,1,63,1,64,1,65,1,67,1,101,1,107,1","however,79,2,101,1,102,4,103,1,107,2,108,2,110,1,111,3,113,1,119,1","hp,10,1,94,1","hrs,13,1,92,4","hs,123,1","ht,123,1","hts,19,4,100,9","http,107,4,109,4,111,4","hu,123,1","hub,94,2","humidity,92,1,94,2,101,1,102,1,103,1,104,1,106,1,105,1,107,1,109,1,110,1,111,1,113,1,124,2","hungary,25,2","hv,123,1","hvr,101,3,102,3,103,3,104,3,108,4","hy,123,1","hybrid,105,2","hydraulic,7,2,60,2,62,2,63,2,64,2,65,2,66,3,67,2,70,4,71,1,72,1,101,3,102,2,103,2,104,2,106,2,105,2,108,2,110,1,111,5,113,1,114,1","hydraulic-rod,66,1","hyrdraulic,60,1,62,1,63,1,64,1,65,1,67,1","hyst,94,1","hysteresis,60,2,62,2,63,2,64,2,65,2,67,2,69,1,94,21,95,1,101,1,96,1,102,1,103,1,104,1,106,1,105,1,121,1,123,2","hz,66,1,94,6,101,1,102,1,103,1,104,1,106,1,105,1,107,1,108,1,109,1,110,1,111,1,113,1,117,1","i.d,75,9,107,1,111,6","i.e,60,1,64,1,94,2,102,1,107,2,111,2","i-004,103,1","iceland,25,2","icor,94,3","id,111,2","idc,106,1","ideal,9,1,20,6,66,1,70,1,68,1,69,1,92,1,101,1,97,4,107,1,108,1,109,1,111,1,114,1,122,4","ideally,114,1","identical,60,1,94,1","identification,123,1","identified,94,1","identifier,104,2","identify,121,1,123,1,124,2","iec,66,5,101,5,102,5,103,5,104,5,106,5,105,5,107,2,108,5,109,2,111,2","iec-standard,110,2,113,2","ies,111,1","ignition,94,1","ignoring,119,1","ii,6,4,7,3,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,50,1,66,3,74,3,108,5,119,2","il,92,1","illustrated,94,1","image,66,1,107,4,109,4,111,4","immediate,21,1","immediately,9,1,37,1,79,1","immersing,114,1","immersion,8,1,84,5,91,8","immunity,66,1,92,1,94,1,101,1,102,1,103,1,104,1,106,1,105,1,108,1,110,1,113,1","impedance,92,1,94,1,121,2,123,2,124,2","impedes,30,1,31,1","implement,104,1","implied,94,1","implies,13,1","important,94,1,114,1,121,1","importantly,13,1","imposed,7,1","impregnated,14,1,18,1,100,1","improper,94,1","improperly,13,1","improve,7,1","improved,100,1,121,1,123,1,124,1","improvement,92,1","improvements,121,1,123,1","improves,7,1,9,1,118,1","impulse,1,4","in2,100,3","inc,1,3,2,1,3,1,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,39,1,56,1,57,1,18,1,19,1,20,1,21,1,22,1,23,3,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,72,1,73,1,74,1,84,1,85,1,75,1,76,1,77,1,78,1,79,2,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1,112,3,114,2,117,2,118,2,119,3,125,1","incandescent,119,1","inch,19,3,60,3,62,2,63,3,64,2,65,2,66,1,67,2,70,1,68,2,69,2,71,14,72,14,94,2,100,1,107,1,111,1,114,8,117,1,121,2,123,2","inch2,100,3","inches,60,6,62,5,63,6,64,6,65,6,66,7,67,5,70,14,68,11,69,9,71,1,72,1,73,1,85,1,81,1,82,1,83,1,86,1,94,2,101,1,102,1,103,1,104,1,106,1,105,1,107,8,108,1,109,2,110,5,111,7,113,5,114,3,117,2","incidental,56,1,79,1,94,1","include,9,2,39,1,56,1,57,1,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,2,42,1,43,2,44,1,45,2,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,58,1,59,1,66,1,71,1,72,1,92,1,94,2,97,1,102,1,107,2,108,2,109,1,110,2,111,1,113,2,122,1","included,16,2,60,6,62,6,63,6,64,6,65,6,66,4,67,4,68,1,71,2,72,2,79,1,83,1,94,4,101,1,102,1,103,2,104,1,106,1,105,1,107,2,108,1,110,2,112,1,113,2,114,1,121,3,123,3","includes,73,2,78,2,89,1,94,1,101,2,102,2,103,2,104,2,105,1,108,2,114,1","including,14,5,18,5,66,1,88,1,91,1,95,1,96,1,97,1,106,1,108,4,114,1,115,1","inconel,17,2,121,1,123,1","incorporate,94,1","incorporates,11,1,16,1,27,1,29,1,30,1,34,1,35,1,95,2,96,2,97,2,122,2,123,2","incorrect,106,1","incrase,117,1","increase,7,1,35,1,36,1,88,1,89,2,91,1,114,2,115,1,117,1,119,1","increased,7,2,50,1,101,1,102,1,103,1,104,1,108,2","increases,121,2,123,2","increment,70,2,68,2,69,2,107,3,109,3,111,3","incremental,92,2,107,1,109,1,111,1","incremented,94,1","increments,60,2,62,2,63,2,64,2,65,2,66,2,67,2,70,2,68,2,69,2,101,2,102,2,103,2,104,2,106,2,105,2,107,2,108,2,109,2,111,2,114,4","incur,79,1","indefinitely,114,6","indelible,114,1","independent,79,1,91,1,106,1,109,1","india,25,2","indian,25,2","indicate,66,1,94,1,108,1,119,1","indicated,70,2,68,2,94,2,107,3,109,2,111,3,114,1","indicates,119,1","indicating,94,1","indication,64,1,104,1","indicator,11,2,71,1,72,1,92,1,94,1,98,16,99,16,97,6,108,2,110,1,122,4,124,2","indicators,92,2,94,2,98,5,99,4","individual,39,1,56,1,57,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,58,1,59,1,79,1,94,1","individually,90,1,91,1,118,1,124,1","indonesia,25,2","induced,94,1,107,1,109,1,110,1,111,1,113,1","inductive,94,4","industrial,9,4,11,1,72,2,64,1,67,2,70,1,71,2,92,1,94,2,101,2,102,1,103,1,104,4,106,7,105,7,107,3,109,4,110,2,111,2,113,2,119,1","industries,1,5,8,1,9,1,23,5,79,4,92,1,107,1,109,1,111,1","industry,1,3,6,5,7,1,56,2,57,2,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,51,2,52,2,53,2,54,2,55,2,60,1,62,1,63,1,64,1,65,1,67,1,93,1,94,1,119,1","inert,29,1,33,1","inexpensive,15,1","infinite,66,1,70,1,68,1,69,1,107,1,108,1,109,1,110,1,111,1","influenced,91,1,114,1,115,1","info,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,17,1,72,1,18,1,19,1,20,1,21,1,22,1,23,1,24,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,73,1,74,1,84,1,85,1,75,1,76,1,77,1,78,1,79,1,80,1,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,2,98,1,99,1,96,2,97,1,125,1","info@mtssensor.co.jp,107,1,109,1,110,1,111,1,113,1","info@mtssensor.de,107,1,109,1,110,1,111,1,113,1","info@westcoastplastics.com,23,1,112,1","information,12,1,13,1,15,1,16,1,39,1,56,1,57,1,21,1,24,1,25,3,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,58,1,59,1,61,1,68,1,69,1,79,2,80,1,90,1,93,1,94,1,101,2,100,1,102,2,103,2,104,1,107,15,108,10,109,2,110,1,111,8,112,5,114,1,117,1,118,1,119,2,121,1,123,1,124,1","infrared,1,1,16,25,66,1,108,1","infrequent,20,1","ingredients,26,3,27,1,29,1,30,1,31,3,32,3,33,3,34,1,35,1,36,3,37,3,38,3","ingress,70,1,107,11,109,12,110,1,111,12,113,1","inherent,87,1,114,1","inhibitor,1,1,6,5,57,1,58,1,59,21,61,1","inhibits,30,1,31,1","initial,94,2,104,1,108,1","initialing,104,1","initiate,72,1,107,1,109,1,111,1,113,1","injection,1,4,6,4,7,6,11,1,17,2,39,1,72,5,23,4,40,1,60,4,62,4,63,4,64,4,65,4,67,4,70,4,68,4,69,4,71,5,73,4,74,4,75,4,76,4,77,4,78,4,79,4,92,1,94,1,95,1,96,1,97,1,110,1,113,1","injector,7,1","injury,114,1","ink,114,1","inline,66,1,108,1","in-line,66,4,108,14","inner,93,1,94,4,119,1","innovations,92,1","innovative,15,1,16,1,68,1,69,1,109,1","inp,94,5","inps,94,4","input,60,1,62,1,63,1,64,1,65,1,66,3,67,1,70,2,68,2,69,2,92,4,94,70,98,2,99,2,101,2,102,1,103,1,104,1,106,3,105,5,107,3,108,5,109,3,110,1,111,3,113,1,121,2,123,2,124,7","inputs,9,2,92,10,94,19,99,1,124,4","inputs.,9,4","inputvoltage,107,1,109,1,111,1","inrush,114,2,117,1,119,1","insert,88,1,94,1,105,1,114,1,115,1","inserted,82,2,88,1,114,5,115,1","insertion,87,1","inside,9,1,66,1,70,1,69,2,93,1,94,3,108,1,109,4,111,3,119,1","inspect,94,1","inspected,94,1","inspection,79,2","install,9,1,10,1,92,1,94,1,103,1,105,1","installable,73,5,107,4,109,4,111,4","installation,9,1,66,3,92,1,93,2,94,9,95,1,101,3,102,4,96,1,97,1,103,3,104,2,106,1,105,3,107,2,108,9,109,3,114,1,117,1,118,2,119,5","installations,114,1","installed,7,1,13,1,70,1,84,1,85,1,81,1,82,1,83,1,86,1,94,3,101,2,102,2,103,2,104,2,106,2,105,1,107,1,108,2,110,1,111,2,113,1,114,2","installing,111,1","instantaneous,7,1,84,1,85,1,81,1,82,1,83,1,86,1,114,1","instantaneously,17,1,89,1,117,1","instantly,68,1,69,1","instead,32,1,34,1,101,1,107,1,109,1,111,1","institute,13,1","institutions,119,1","instruction,94,1","instructions,9,1,94,5,104,1,114,1,117,1,118,1,119,1","instrumanets,15,1","instrument,13,4,15,1,92,3,94,27","instrumentation,94,2","instruments,13,3,15,1,59,1,94,1,119,1","insulated,100,3,114,1,119,2","insulating,100,1","insulation,22,2,100,2,118,4","insure,94,1","int,121,2,123,2","intake,10,1","inteface,63,1","integral,13,1,72,1,60,3,62,3,63,5,64,1,65,2,66,8,71,1,101,13,102,13,103,11,104,2,106,2,105,4,107,15,108,23,109,14,110,2,111,13,113,4","integrald34connector,109,1,111,1","integrald84connector,111,1","integrated,7,1,72,1,66,1,71,1,101,2,102,1,103,2,104,1,106,1,105,1,108,1,110,1","integrating,124,1","integrity,66,1,108,1","intel®,105,1","interaction,7,1,107,2,109,2,110,1,111,2,113,1","interacts,7,1","interchangeable,95,1,96,1,121,1,123,1","interest,79,1","interface,9,2,72,4,62,2,63,4,64,2,65,1,66,2,67,2,71,1,74,2,77,1,78,4,94,1,98,1,101,7,102,1,103,4,104,2,106,5,105,4,107,6,108,6,109,5,110,1,111,6,113,5","interfaces,66,2,92,1,107,1,108,3,109,1,111,1,113,1","interfacing,60,1,107,1,108,1,109,1,111,1","interference,90,1,94,1,118,1","intergrating,124,1","interior,114,1","internal,16,1,66,2,69,1,89,2,92,1,93,1,94,1,95,1,98,1,101,1,102,1,96,1,103,1,104,1,106,1,105,1,108,6,109,1,117,2,119,1,121,1,123,1,124,1","international,8,1","interrogate,108,1","interrogation,7,2,66,2,107,4,108,12,109,4,110,2,111,4,113,2","interval,101,1,114,1","introduce,66,1,108,1","introduced,6,5","introducing,15,1","invader,6,1,53,6,61,1","invented,7,1","inventors,66,1,108,1","inverse,72,1,107,2,109,2,111,2,113,2","inverted,117,1","investment,35,1,36,1,59,1","invoice,79,1,112,1","involving,88,1,114,1,115,1","ip,101,3,102,3,103,3,104,2,106,2,105,2,107,1,108,2,109,1","ip65,68,1,124,1","ip67,66,2,69,1,107,10,109,11,110,1,111,10,113,1","ip69k,70,3,111,3","ipc,104,1","ipx7,13,3,15,1","ir,66,2,108,4","iran,25,2","iraq,25,2","ireland,25,2","is0,64,1","island,17,1,25,6,95,1,98,1,99,1,96,1,97,1,121,2,122,2,123,2,124,2,125,1","islands,25,32,92,1","iso,62,1,65,1,92,1,103,2,104,2,105,1","iso9001.the,8,1","isolate,94,1","isolated,66,1,94,1,98,1,108,1,124,1","isolation,92,1,94,3,124,2","israel,25,2","issuance,79,1","issue,79,1","issues,66,2,67,1,106,1,108,2","it&rsquo,60,1,62,1,63,1,64,1,65,1,67,1","italy,25,2,92,1","item,60,1,62,3,63,1,64,1,65,1,66,5,67,1,70,1,68,1,69,3,79,1,121,1,123,1,124,2,125,1","items,9,1,10,2,12,2,13,2,15,2,19,2,20,2,73,2,74,2,84,2,85,2,75,2,77,2,78,2,79,5,81,2,82,2,83,2,86,2,87,1,88,1,89,1,90,2,91,2","its,8,1,9,2,26,2,27,2,30,1,31,1,70,1,79,1,88,1,92,5,94,8,104,1,107,2,110,1,111,3,113,1,114,2,115,1,117,2","its-90,94,1","itself,9,1,17,1,87,1,93,1,119,1","ivoire,25,2","j.i,119,1","j.i.1d8a1.af,92,1","j1,74,1","j2,74,1","ja,121,1,123,1","jack,16,5","jacket,60,2,63,2,66,6,73,4,76,4,101,2,102,2,100,1,106,2,107,4,108,8,109,4,111,4","jacketed,66,1,108,1","jam,109,2","jamaica,25,2","japan,25,2,92,1,107,1,109,1,110,2,111,1,113,2","j-bus,124,1","jewelry,35,1,36,1","jl,121,1","job,57,1","jobs,57,1","joint,60,2,62,2,63,2,64,2,65,2,66,2,67,2,73,2,75,2,77,1,101,2,102,2,103,2,104,2,106,2,105,2,108,2","jordan,25,2","ju1,94,7","ju2,94,7","jumper,9,1,94,4","jumpers,94,3","junction,8,1,84,6,91,12,92,2,93,1,94,5,114,1,119,3","jurisdiction,119,2","jw,121,1,123,1","kazakhstan,25,2","kbd,62,4,63,1,64,3,101,5","kbit,62,1,103,5,104,2","kbits,104,3","keeping,66,1,108,1","kenya,25,2","kept,94,1","key,94,34,124,1","keyboard,98,1","keypad,9,1,12,1,92,1,94,6","keys,94,8","keywords,5,1","kg,107,1,109,1,110,1,111,1,113,1","khz,63,1,67,1,68,1,101,1,106,1,110,1","kidde,1,4,8,4,93,4","kidde-fenwal,8,1,84,4,85,4,81,4,82,4,83,4,86,4,87,4,88,4,89,4,90,4,91,4,114,2,117,2,118,3,119,3","kilns,22,1","kingdom,25,2,92,1","kiribati,25,2","kit,73,1,78,4,101,4,102,2,97,13,109,1,122,5","kits,11,1,17,1,66,1,95,1,96,1,97,6,108,2,122,1","kitts,25,2","knitted,100,5","knitting,19,1,100,3","knob,84,2,85,1,81,1,82,1,83,1,86,1,114,5","knowledge,104,1","known,8,1,17,1,20,1","kohm,70,1,68,1,69,1,110,1","kong,25,2","korea,25,4,92,1","kuwait,25,2","kyrgyzstan,25,2","l1,118,1","l1­no,118,1","l2­105°c,118,1","l3­200°c,118,1","l4­250°c,118,1","label,6,4,13,1,32,22,34,22,35,22,36,22,61,4,94,5,114,1","labeling,119,1","labels,94,1","laboratories,84,1,85,1,81,1,82,1,83,1,86,1,114,3,117,1","laboratory,100,1,114,1,119,2","laces,100,1","lack,7,1","lag,114,1,119,1","laminating,114,1,117,1","lamps,114,2,117,1,119,1","language,94,1","lanka,25,2","lanyard,12,1","laos,25,2","lapidary,35,1,36,1","large,10,1,12,1,13,1,72,1,70,1,71,1,75,4,107,1,109,1,110,1,111,1,113,1,114,1","large-capacity,10,1","larger,20,1,114,1","largest,94,1","laser,16,10","last,1,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,15,1,16,1,17,1,39,1,56,1,72,1,19,1,20,1,25,2,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,73,1,74,1,84,1,85,1,75,1,76,1,77,1,78,1,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,2,93,1,94,1,95,1,98,1,99,1,96,1,97,1","lasting,47,1,48,1,93,1,119,1","latches,94,1","latching,94,3","late,79,1","latest,35,1,36,1,67,1,92,1,106,1,107,1,109,1,111,1","latin,92,1","latter,94,2","latvia,25,2","launched,7,1","launching,7,1","layer,67,1,106,1","layers,100,3","layout,28,4,121,4,122,4,123,4,124,4","lay-up,39,1,40,1","lb,94,1","lbs,20,8,92,1,94,1,101,1,102,1,103,1,104,1,106,1,105,1,107,1,108,1,109,1,110,1,111,1,113,1","lcd,12,1,13,1,16,2","lead,8,1,84,2,85,3,81,3,82,3,83,3,86,3,94,12,100,3,114,8,118,5","leadership,1,1,23,1","leads,19,1,95,1,96,1,100,5,114,1,117,1,121,1,123,1","leadwire,100,1,114,1","leadwires,100,1,114,2,119,1","least,60,1,62,1,63,1,64,1,65,1,67,1,92,1,94,1,107,1,109,1,111,1","leave,94,1","lebanon,25,2","lecithin,45,1","led,92,3,94,16,98,1,99,1,101,6,102,4,103,2,104,5,106,4,105,4,108,6,124,4","leds,7,1,66,1,94,3,101,2,102,2,103,3,104,3,106,2,105,2,108,3","left,90,1,93,1,94,2,102,1,108,1","legacy,7,1,66,1,108,3","legal,103,1,105,1","lends,119,1","length,7,1,17,4,72,16,19,1,20,1,60,2,62,3,63,5,64,2,65,4,66,2,67,3,70,5,68,6,69,3,71,14,76,1,94,8,101,24,102,22,100,3,103,19,104,12,106,14,105,9,107,41,108,17,109,18,110,6,111,25,113,8,114,14,117,2,118,2","lengths,72,3,60,7,62,1,63,2,64,1,65,1,67,1,69,6,71,3,76,1,94,1,102,5,105,1,107,3,108,4,109,6,110,2,111,1,113,2,114,2,117,1","leone,25,2","ler,107,1","lesotho,25,2","less,10,1,50,1,70,1,87,1,94,6,101,1,102,1,103,1,104,1,106,1,105,1,107,3,109,1,110,1,111,3,113,1,121,5,123,5","letter-designated,94,1","level,11,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,64,1,65,1,66,1,73,1,75,1,92,1,94,1,98,1,99,1,101,1,102,1,103,1,104,2,106,1,105,1,108,1,111,1,119,1,121,2,122,2,123,2,124,2","levels,94,2,119,1","lf,105,1","lfetm,92,3","lh,66,2,74,1,108,3","liability,79,3","liable,79,2,94,1","liberia,25,2","libraries,119,1","libya,25,2","licensed,4,1","liechtenstein,25,2","life,12,1,13,1,15,7,19,1,30,1,31,1,70,1,88,2,90,1,91,2,100,2,111,1,114,2,115,2,117,1,118,1,119,1","lifetime,15,6","light,10,1,39,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,58,2","lightweight,10,4,82,1","likewise,102,1,107,2,111,3","limit,9,3,82,1,91,2,92,6,94,16,102,2,103,2","limitation,67,1,79,1,106,1","limitations,94,1","limited,72,1,87,1,94,1,102,1,103,1,104,1,105,1,107,1,111,2,113,1,114,1","limits,91,1,94,5,102,1,121,1,123,1","lin,102,1","line,6,1,7,6,11,1,39,6,56,4,20,1,23,1,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,4,40,6,41,6,42,6,43,6,44,6,45,6,46,6,47,6,48,6,49,6,50,6,51,4,52,4,53,4,54,4,55,4,57,4,58,4,59,4,65,1,92,2,94,5,95,1,96,1,97,1,112,1,114,1,122,1,123,1","linear,1,1,7,26,72,17,60,19,62,18,63,19,64,18,65,19,66,6,67,18,70,18,68,21,69,21,71,17,73,16,74,16,75,16,76,16,77,16,78,16,89,1,101,1,102,1,103,1,104,1,106,1,105,1,107,1,108,1,109,2,110,1,111,1,113,1,117,1","linearity,11,1,70,1,68,1,69,1,95,1,96,1,97,1,107,2,109,2,111,2,122,1,123,1","linearization,92,1,94,2","linear-position,72,1,70,1,71,1,101,7,102,6,103,7,104,5,106,6,105,1,107,13,108,8,109,11,110,6,111,11,113,6","liner,18,1","lines,1,4,23,4,60,1,62,1,63,1,64,1,65,1,67,1,79,4,94,2,107,1,109,1,111,1,113,1","link,94,1","linking,104,1","links,62,1,64,1","liquid,15,1,20,4,73,1,75,1,91,3,94,1","liquids,88,2,91,1,114,2,115,2","list,25,1,117,2","listed,84,1,85,1,79,2,81,1,82,1,83,1,86,1,92,1,94,5,112,1,114,3,117,2,119,3","listing,100,1","listings,119,2","lit,94,4","lithuania,25,2","livestock,114,1","ll,94,2,105,1","lmt,103,1","lo,94,7","load,70,1,68,1,69,1,89,1,91,1,94,4,102,2,117,1,121,1,123,1,124,2","loaded,105,1","loads,94,2,114,3,117,1","local,100,1,118,2,119,2","localpreference,119,1","locate,94,1","located,92,1,94,10,101,2,102,2,103,2,104,2,106,2,108,2","location,23,1,66,1,94,3,107,1,108,1,109,1,114,1,119,1","locations,92,1,94,2,119,6","lock,9,1,16,1,92,2,94,1,98,1,121,1,124,1","locking,117,6","logic,101,1","login,1,1,2,6,3,6,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,39,1,56,1,72,1,18,1,19,1,20,1,21,1,22,1,23,1,25,3,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,73,1,74,1,84,1,85,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1,125,1","login.php,2,4","logout,1,1,2,1,3,1,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,39,1,56,1,72,1,18,1,19,1,20,1,21,1,22,1,23,1,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,73,1,74,1,84,1,85,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1,125,1","logout.php,3,4","long,10,1,14,1,18,1,47,1,48,1,58,1,59,1,70,2,84,1,85,2,81,2,82,2,83,2,86,2,90,1,93,1,94,1,111,3,117,2,118,1,119,1,121,2,122,2,123,2,124,2","longer,19,1,30,1,31,1,60,2,62,1,63,3,66,2,69,1,94,2,100,2,107,1,108,2,109,1,114,1","long-term,10,2","look,9,1,98,1,99,1","looking,9,1","looks,94,1","loop,124,1","loosen,94,2","los,23,1","loss,107,1,109,1,110,1,111,1,113,1","losses,79,1","lost,26,1,31,1,32,1,33,1,36,1,37,1,38,1","low,9,2,10,1,16,1,19,2,68,1,82,2,88,1,89,2,92,11,94,22,99,1,100,3,107,1,108,1,114,5,115,1,117,3,119,1,124,1","low-cost,15,1,72,1,70,1,71,1,107,1,109,1,110,1,111,1,113,1","lower,93,2,94,5,100,1,104,1,114,1,119,1","low-expanding,84,1,85,1,81,1,82,1,83,1,86,1,114,1","low-height,107,1","low-profile,68,2,77,1","lr,118,1","lr7378,114,1,117,1","lsb,101,1","l-series,7,4,66,2,108,6","lss-service,103,1","lube,1,1,6,8,32,14,34,14,35,14,36,13,61,4","lubricant,35,1,36,1","lubricants,41,1","lubrication,107,1","lubricity,59,1","lucia,25,2","lüdenscheid,107,1,109,1,110,1,111,1,113,1","lug,101,1,102,1,107,3,108,3,109,3,113,2","luxembourg,25,2","lvdt,7,4,72,4,60,4,62,4,63,4,64,4,65,4,67,4,70,4,68,4,69,4,71,4,73,4,74,4,75,4,76,4,77,4,78,4","m0,103,1,105,1","m1,102,2,103,2,106,2,105,2,107,2,111,2","m12,65,1,70,2,68,2,69,2,73,6,106,6,105,8,107,45,109,24,111,22","m-12,73,9","m12cordsetsand,107,1","m12-d,67,1,106,1","m12x1,106,1","m14,121,1,123,1","m16,73,2,101,1,102,1,103,2,105,2,107,4,108,3,109,3,111,4","m18,66,1,70,2,101,2,102,2,103,2,104,2,106,2,105,2,108,2,111,5,121,1,123,2","m19,106,1","m1a,102,2,103,1,105,1,107,2,111,2","m2,102,1,103,1,106,2,105,1,107,1,111,1","m20,106,1","m2a,102,1,107,1,111,1","m3,103,1,106,2,105,1","m4,101,1,102,1,103,1,106,1,105,1,108,1,110,1,113,1","m5,66,1,101,2,102,2,103,2,104,2,106,3,105,2,107,6,108,2","m6,69,1,73,1,77,1,109,4","m8,65,1,67,1,106,4,105,4","ma,60,26,62,1,63,1,64,1,65,1,66,6,67,1,70,7,68,7,69,5,87,1,88,1,92,2,94,5,95,1,99,1,101,2,102,34,96,1,97,1,103,1,104,1,106,1,105,1,107,11,108,24,109,9,110,1,111,11,113,1,114,1,117,1,118,1,119,1,121,5,122,5,123,7,124,3","macau,25,2","macedonia,25,2","machida-shi,107,1,109,1,110,1,111,1,113,1","machine,7,3,56,1,51,1,52,1,53,1,54,1,55,1,57,1,60,1,62,2,63,1,64,1,65,2,67,2,68,1,69,1,101,1,102,1,103,1,104,1,106,2,105,2,107,6,109,3,110,3,111,1,113,3","machinery,1,1,56,1,23,1,101,1,102,1,103,1,104,1,108,1","machines,7,2,14,5,72,1,18,5,51,1,52,1,55,1,68,1,69,1,71,1,110,1,113,1,114,1,117,2","machining,97,1,122,1","madagascar,25,2","madc,92,1","made-to-order,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1","magnet,7,2,72,7,60,17,62,11,63,8,64,8,65,11,66,16,67,14,70,5,68,8,69,1,71,4,73,1,75,17,77,5,78,2,101,23,102,43,103,26,104,18,106,28,105,31,107,71,108,33,109,15,110,16,111,67,113,18","magnetic,7,4,107,4,109,4,110,1,111,4,113,1","magnetostriction,7,9,72,8,60,8,62,8,63,8,64,8,65,8,67,8,70,8,68,8,69,8,71,8,73,8,74,8,75,8,76,8,77,8,78,8,107,1,109,1,111,1","magnetostrictive,1,1,7,3,72,1,62,1,63,1,64,1,65,1,66,1,67,1,70,2,68,2,69,2,71,1,107,5,108,1,109,6,110,5,111,6,113,5","magnets,7,2,72,2,60,3,62,19,63,2,65,21,66,3,67,25,70,5,68,5,73,6,74,4,75,5,77,4,78,4,101,5,102,12,103,9,106,6,105,7,107,16,108,3,111,13,113,2","magnitude,60,1,102,2","mail,25,1","main,23,2,94,5,95,1,101,1,96,1,112,1,114,1,117,1,118,1,119,1","mainly,103,1","maintain,72,1,102,1,107,1,111,1,113,1","maintained,66,1,94,1,107,1,108,1,111,1","maintaining,20,1","maintains,26,1,27,1","maintenance,6,5,7,3,10,1,20,2,58,1,59,1,107,2,109,1,111,1,113,1,114,1,117,1,118,1,119,1","major,6,5,39,4,56,4,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,4,40,4,41,4,42,4,43,4,44,4,45,4,46,4,47,4,48,4,49,4,50,4,51,4,52,4,53,4,54,4,55,4,57,4,58,4,59,4","majority,66,1,108,1","makers,66,1,108,1","makeup,91,1,114,1,115,1","making,56,1,66,1,108,1,119,1","malawi,25,2","malaysia,25,2","maldives,25,2","male,65,1,66,5,67,1,70,2,68,2,69,2,73,4,74,3,76,1,77,3,86,1,87,1,101,3,102,4,103,5,104,4,106,5,105,16,107,17,108,10,109,19,111,17,113,3,114,1","mali,25,2","malta,25,2","management,111,1","manager,104,1","manual,9,1,78,1,94,16,108,1,113,1","manually,94,1,107,1,109,1,111,1","manuals,94,1","manufacture,79,2","manufacturer,11,1,39,5,56,4,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,4,40,5,41,5,42,5,43,5,44,5,45,5,46,5,47,5,48,5,49,5,50,5,51,4,52,4,53,4,54,4,55,4,57,4,58,4,59,4,70,1,68,1,69,1,79,6,107,2,109,2,111,1,118,1","manufacturers,79,1,94,1","manufacturing,8,2,17,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,79,1,94,1,102,3","mariana,25,2","marino,25,2","marked,16,1,25,1,114,1","marketing,94,1","marketplace,11,1","marking,12,1,13,1,50,1,84,1,81,1,82,1,83,1,85,1,86,1,114,7,115,3","marley,1,4","married,15,1","marshall,25,2","martinique,25,2","massachuset,119,1","massachusetts,92,1,114,1,117,1,118,1","master,78,1,79,1,103,1,104,3,105,2","match,94,1","matches,98,1,124,1","mate,121,3,123,3","material,10,1,17,3,39,1,47,1,56,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,2,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,84,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,94,1,101,1,102,1,103,1,104,1,107,7,109,1,110,1,111,5,113,1,114,3,117,1,118,2,119,2,121,1,123,1","materials,1,1,17,1,37,1,42,1,44,1,94,1,123,1","mates,74,10,101,1,102,1,107,10,108,1,109,10,111,10,113,3","mating,70,1,68,1,95,1,101,1,102,1,96,1,97,1,107,3,108,2,109,2,111,2,113,1,122,1,123,1","matingcableconnectoroptionsfor,109,1,111,2","matrix,92,1,94,2,107,1,109,1,111,1","matter,7,1,84,1,81,1,82,1,83,1,85,1,86,1,114,2,117,1,118,1,119,1","mauritania,25,2","mauritius,25,2","max,15,2,16,1,60,9,65,3,67,1,70,1,68,1,69,1,87,1,92,2,94,1,99,1,102,10,100,3,103,1,106,2,105,3,108,1,110,1,113,1,119,5,121,3,123,4,124,5","maximize,66,1,108,2","maximum,10,2,13,1,38,1,60,2,67,2,68,1,84,3,81,3,82,3,83,3,85,3,86,3,91,2,93,1,94,4,101,1,102,3,103,2,106,2,105,2,107,2,108,1,109,2,110,1,111,3,113,1,114,7,117,1,119,1,121,2,123,2,124,2","mayotte,25,2","mbd,63,1,101,2","mbit,65,1,106,1,105,1","mbps,105,1","mcdonald,25,2","means,7,1,84,1,81,1,82,1,83,1,85,1,86,1,94,3,114,1","measure,16,2,68,1,69,1,73,1,75,1,94,1,95,1,96,1,97,2,122,1","measured,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,94,1,101,1,102,1,103,1,104,1,106,1,105,1,107,1,108,1,109,1,110,1,111,1,113,1,124,1","measurement,7,1,13,1,15,1,72,6,60,6,62,3,63,3,64,2,65,2,66,2,67,4,70,6,68,4,69,4,71,4,92,1,94,2,95,1,101,12,102,5,97,2,103,8,104,2,106,8,105,12,107,7,109,9,110,8,111,10,113,12,121,1,122,2,124,1","measurement&#132,70,1","measurement.,7,4,72,4,60,4,62,4,63,4,64,4,65,4,67,4,70,4,68,4,69,4,71,4,73,4,74,4,75,4,76,4,77,4,78,4","measurementrod,102,1","measurements,72,2,60,1,62,2,63,1,64,1,65,4,67,3,101,1,103,5,104,1,106,2,105,3,107,3,111,3,113,2","measuring,7,1,9,5,60,1,62,1,63,1,64,1,65,1,66,1,67,2,70,3,68,2,69,2,92,1,94,1,101,2,102,3,97,1,103,1,106,3,105,4,107,4,108,2,109,4,110,5,111,4,113,6,118,1,122,1","measurment,63,1","meca-ca,97,4,122,4","mechanical,7,1,84,5,81,5,82,5,83,5,85,5,86,5,87,4,88,4,89,4,91,4,94,5,95,1,96,1,97,1,100,1,121,1,122,1,123,2,124,3","mechanically,94,1,114,1","mechanisms,58,1","media,20,1,94,1,95,1,96,1,97,1,107,2,109,2,111,2,121,1,122,1,123,2","medical,56,1,23,1,44,1","medium,7,1,19,2,88,1,100,3,114,7,115,1","meet,17,1,23,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,90,1,95,1,98,1,99,1,96,1,97,1,118,1","meets,94,1","megohms,118,1","melamine,42,1,43,1,45,1","melamines,39,1,40,1","melt,1,1,11,32,17,11,95,34,98,11,99,11,96,35,97,50,121,2,122,10,123,4","melted,95,4,96,4,97,4","melt-kit,122,4","melt-kits,97,2,122,2","member,84,1,81,1,82,1,83,1,85,1,86,1,114,1","memory,12,1,13,2,15,1,92,1,94,2,99,1,124,1","menus,124,2","mercantile,119,1","merchandise,79,2,94,1","merchantability,94,1","mercury,94,3,95,1,96,1,97,1,122,1,123,1","merely,84,1,81,1,82,1,83,1,85,1,86,1,114,1","met,93,1,114,1,117,1,118,1,119,2","metal,20,1,35,1,36,1,59,1,84,2,81,2,82,2,83,2,85,2,86,2,94,2,100,1,104,2,107,2,109,1,110,2,113,2,114,2,118,1","metalizing,47,1","metals,58,2,59,2,89,1,107,1,111,1,117,1","meter,1,1,12,4,13,14,108,2,110,1","meters,60,4,62,1,63,4,66,2,101,4,102,4,103,4,107,1,108,5,109,1,111,1","methacrylate,39,1,40,1,42,1,43,1","method,39,1,47,1,56,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,98,1,107,1,109,2,118,1,124,1","methods,15,1,62,1,64,1,104,1","metric,60,6,62,2,63,4,64,1,65,1,66,3,67,2,69,2,73,1,77,1,101,4,102,7,100,1,103,4,104,3,106,3,105,3,108,3,109,2,121,2,123,3","metropolitan,25,2","mexico,24,1,25,2","m-f,1,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,39,1,56,1,72,1,18,1,19,1,20,1,21,1,22,1,23,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,47,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,73,1,74,1,84,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1,125,1","mgt-1000,22,1","mgt1000-10,22,1","mgt1000-12,22,1","mgt1000-14,22,1","mhk-aa,97,1,122,1","mhz,66,1,68,1,108,2","micro,64,1,104,4","microamps,92,1,94,1","microbased,94,1","microcontrollers,15,1","microelectronics,72,1,71,1,110,1","microfarad,94,1","micronesia,25,2","microns,7,1,60,1,62,2,63,1,64,1,65,1","micro-platlet,46,1","microprocessor,12,1,101,1","microprocessor-based,7,1,62,1,66,1,108,1","microsoft,120,4","micro-thin,30,1,31,1","microv,124,1","middle,94,4","midget,8,1,87,17","migration,30,1,31,1","mike,23,1","mike@westcoastplastics.com,23,1","military,11,1","milliamp,94,10","milliamps,92,1","millimeters,60,2,62,2,63,2,64,2,65,2,66,2,67,2,70,2,68,2,69,2,101,1,102,1,103,1,104,1,106,1,105,1,107,1,108,1,109,1,111,1,118,1","millisec,118,1","millivolt,94,5","millivolts,92,1,94,2","mills,111,1","mil-std-202d,118,1","mil-std-213b,118,1","min,15,2,16,1,39,1,47,1,56,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,70,1,68,1,69,1,93,1,99,1,101,2,102,4,103,1,106,2,105,1,111,2,119,4,124,1","mind,9,1","mineral,6,1,44,10,61,1,95,1,96,1,97,1,121,1,122,1,123,2","mini,103,1","miniature,87,1","minimize,94,2","minimized,70,1,100,1,111,1","minimizes,7,1,66,1,90,1,108,1,114,1,118,1","minimizing,90,1,118,1","minimum,39,1,47,1,56,1,72,1,22,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,4,62,2,63,3,64,2,65,2,66,1,67,2,70,2,68,1,84,1,81,1,82,1,83,1,85,1,86,1,89,1,90,1,91,1,92,1,94,2,101,2,102,7,100,1,103,2,104,2,106,2,105,2,107,11,108,2,109,2,110,1,111,17,113,2,114,4,117,1,118,1,119,2,121,1,123,1","minor,25,2","minus,94,7","minute,60,1,62,1,63,1,64,1,65,1,67,1","minutes,12,1,13,1,16,1,94,2,124,1","miquelon,25,2","misapplication,94,1","mishandling,114,1","missing,106,2,105,1,108,1","mitigate,107,1","mm,72,1,60,9,62,7,63,11,64,7,65,9,66,7,67,5,70,15,68,7,69,8,73,3,92,6,101,66,102,71,103,66,104,61,106,63,105,61,107,185,108,70,109,95,110,28,111,125,113,37,114,3,117,1,124,2","mm2,106,1","mmin,107,1","mo,121,1,123,1","mod,114,4,117,1","modbus,92,1,94,2","modbustm,124,2","mode,9,1,92,3,94,48,101,2,102,2,103,1,105,1,108,7,124,4","model,9,3,10,1,11,5,12,4,13,1,16,4,17,10,72,2,20,2,60,11,62,10,63,10,64,10,65,10,66,5,67,9,70,6,68,4,69,1,71,1,74,3,77,7,87,1,91,3,92,1,93,3,94,19,95,12,98,18,99,20,101,18,102,19,96,13,97,19,103,15,104,14,106,10,105,10,107,28,108,19,109,33,110,7,111,43,113,10,114,1,117,1,119,5,121,16,122,11,123,16,124,8","models,13,1,17,2,60,1,84,2,77,1,81,2,82,2,83,2,85,2,86,3,91,2,92,1,101,3,102,7,97,5,103,3,104,4,106,2,105,2,107,37,108,3,109,4,114,1,118,1,119,2,121,1,123,1,124,1","moderately,56,1","modern,15,1,68,1,69,1","modes,15,2,16,1,66,2,92,1,94,5,103,1,104,1,106,1,105,3,108,3","modification,114,10,117,7","modifications,83,1,94,1,100,1,114,9,115,3,117,1,119,1,121,1,123,1,124,1","modificatons,114,1","modified,6,1,7,1,8,1,9,2,10,1,11,1,12,1,13,1,15,1,16,1,17,1,39,1,47,2,56,1,72,1,19,1,20,1,26,1,27,1,29,1,30,1,31,1,32,2,33,1,34,2,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,73,1,74,1,84,1,75,1,76,1,77,1,78,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1","modified-stock,79,1","modify,9,1,94,4","modifying,94,1,101,1","modiifications,114,1","modular,62,1,63,1,64,1,65,1,67,1,101,2,102,2,103,1,104,1,106,1,105,1,108,2","modulated,66,2","module,74,2,104,2,107,5,108,1,109,4,111,5","mohms,124,2","moisture,58,1,66,1,84,2,76,2,81,2,82,2,83,2,85,2,86,2,94,1,108,1,114,8","moistureresistant,114,1","mold,1,14,6,38,7,1,16,1,39,31,47,32,56,40,23,4,24,1,26,38,27,37,29,37,30,39,31,40,32,39,33,38,34,38,35,37,36,38,37,43,38,38,40,31,41,31,42,31,43,31,44,32,45,35,46,33,48,32,49,31,50,32,51,34,52,34,53,34,54,34,55,34,57,36,58,13,59,10,61,8,79,4,80,1","molded,49,1,50,1,54,1,92,1,94,1,104,1","molder,17,1","molders,7,1,17,1,95,1,96,1,97,1","molding,1,4,6,4,7,6,11,1,17,5,47,1,72,5,23,4,26,1,31,1,32,3,33,1,34,2,36,1,37,2,38,1,43,1,44,1,45,1,46,1,50,1,58,1,59,2,60,4,62,4,63,4,64,4,65,4,67,4,70,4,68,4,69,4,71,5,73,4,74,4,75,4,76,4,77,4,78,4,79,4,98,4,99,4,110,1,113,1","moldova,25,2","molds,6,1,56,2,26,1,27,2,29,2,30,2,31,1,32,1,33,1,34,2,35,2,36,1,37,1,38,1,44,1,49,1,51,2,52,2,53,2,54,4,55,2,57,1,58,1,59,1,61,1","momentary,107,1,109,1,110,1,111,1,113,1","monaco,25,2","monday,23,1,79,1","money,92,1","mongolia,25,2","monitoring,7,1,66,3,101,1,102,1,103,1,104,1,106,1,105,2,108,3","monograph,94,1","monomer,30,1,31,1","montserrat,25,2","morocco,25,2","motion,64,1,67,1,91,1,104,1,106,1,109,1","motor,10,2,92,1,94,1","motorola®,105,1","motors,22,1,114,1","mount,8,1,77,1,89,13,93,2,94,1,117,2,118,4,119,2","mounted,17,1,84,1,81,1,82,1,83,1,85,1,86,1,89,1,93,9,94,6,101,1,102,1,103,1,104,1,106,1,105,1,107,3,108,1,109,3,110,1,111,2,113,1,114,2,119,5","mounting,7,2,72,2,66,4,69,3,71,2,73,10,75,10,77,4,81,1,83,1,85,1,86,1,87,3,88,2,89,2,90,5,91,1,92,2,93,3,94,16,95,1,101,11,102,10,97,1,103,9,104,9,106,9,105,10,107,49,108,11,109,29,110,18,111,7,113,16,114,7,115,1,117,5,118,14,119,9,121,2,122,1,123,1","mounts,107,2,110,1,113,1","mov,94,2","movable,90,2,107,2,109,2,110,1,111,2,113,1","move,94,9","moveable,7,2,101,1,107,1,109,1,110,1,113,1","moved,94,1","moves,69,1,102,1,107,1,109,1","moving,20,1,94,1,107,4,109,2,110,1,113,1","movs,94,2","mozambique,25,2","mp,121,1,123,1","mp101,59,5,61,1","mpa,91,1","mrc,9,11,92,9,94,6","mrc5000,9,14,92,1,94,8","mrc7000,92,2","ms,60,3,62,3,63,1,64,3,65,1,66,4,74,4,101,2,102,4,103,4,104,4,105,6,108,5,124,1","ms0,63,1,66,1,101,4,108,2","msb,101,1","msds,39,2,47,2,56,2,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,2,50,2,51,2,52,2,53,2,54,2,55,2,57,2,58,2,59,2","msec,67,1","mso,108,1","mt,123,1","mtc-aa,97,1,122,1","mts,1,9,7,19,72,20,23,4,24,2,60,20,62,21,63,20,64,20,65,21,66,7,67,22,70,19,68,19,69,19,71,20,73,17,74,17,75,17,76,17,77,17,78,17,79,4,80,1,101,9,102,8,103,12,104,5,106,7,107,21,108,10,109,19,110,11,111,18,113,11","mts&rsquo,68,1,69,1","mts-acc-cables.php,76,4","mts-acc-connectors.php,74,4","mts-acc-magnets.php,75,4","mts-acc-mounting-hdwe.php,77,4","mts-acc-sensor-prog.php,78,4","mts-eh-brochure.pdf,111,4","mts-eh-sensor.php,70,4","mts-el-ep-brochure.pdf,107,4","mts-ep2-analog.pdf,110,4","mts-ep2-analog.php,71,4","mts-ep2-digital.pdf,113,4","mts-ep2-digital.php,72,4","mts-ep-sensor.php,68,4","mts-er-brochure-2011.pdf,109,4","mts-er-sensor.php,69,4","mts-e-series-accessories.php,73,4","mts-gseries-analog,108,4","mts-gseries-analog.pdf,108,4","mts-gseries-sensors.php,66,4","mtshome.php,7,4","mts-r-analog,102,4","mts-r-analog.pdf,102,4","mts-r-analog.php,60,4","mts-r-canbus.php,62,4","mts-r-devicenet.php,64,4","mts-r-ethercat.php,67,4","mts-r-profibus.php,65,4","mts-rseries-canbus,103,4","mts-rseries-canbus.pdf,103,4","mts-rseries-devicenet,104,4","mts-rseries-devicenet.pdf,104,4","mts-rseries-ethercat,106,4","mts-rseries-ethercat.pdf,106,4","mts-rseries-profibus.pdf,105,4","mts-rseries-ssi,101,4","mts-rseries-ssi.pdf,101,4","mts-r-ssi.php,63,4","multi,62,1","multidrop,124,1","multi-magnet,62,1,65,1,67,1,103,7,106,2,105,6","multiple,62,1,64,1,65,1,94,1,100,2,104,1,105,2,107,1,111,1","multiples,114,1","multi-position,72,2,62,1,65,1,67,1,103,2,106,2,105,3,107,2,111,2,113,5","multi-strand,100,2","mutil-magnets,65,1","mutual,92,1,119,1","mutually,79,1","mv,92,2,94,4,95,1,99,1,96,1,97,1,121,3,122,6,123,3,124,5","mvdc,92,1","myanmar,25,2","mylar,118,1","n.c,101,6,103,6,105,8","n.i.s.t,13,1","n0,66,2","naics,112,1","nak,95,1,96,1,97,1,121,3,122,1,123,4","name,5,1,7,1,13,1,24,1,25,5,61,1,80,1,112,12","nameplate,123,1","names,92,1","namibia,25,2","narrow,89,1,117,1","national,13,1,119,2","natural,39,1,40,1,45,1","nature,94,1","nauru,25,2","nc,110,1,113,1,121,9,123,9","near,94,5,107,1,109,1,113,1","nearest,94,1","nearly,26,1,31,1,32,1,33,1,36,1,37,1,38,1","necessary,94,4,112,1","needed,12,1,24,1,35,1,36,1,60,3,62,2,63,3,66,4,80,1,94,2,95,1,101,1,102,4,96,1,107,2,108,1,109,1,111,2,114,1","needs,23,1,110,2,113,2","negative,94,4,102,3","nema,9,5,92,5,94,5","nepal,25,2","net,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,79,1,112,1,114,2","netherlands,25,4","network,62,2,64,2,94,2,104,8,106,1","networked,67,2,106,3","networking,67,1,106,1","networks,67,1,94,1,106,1","neuter,66,1,108,8","neutered,108,1","neutral,94,5","neutralization,58,1","nevada,24,1","never,12,1,107,1,109,1,110,1,111,1,113,1","nevis,25,2","new,1,7,6,1,7,3,15,1,39,2,47,2,72,2,24,1,25,6,27,1,29,1,30,1,34,1,35,1,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,2,50,2,66,4,70,1,71,2,75,1,92,1,94,6,103,2,105,2,107,1,108,2,109,1,110,2,111,1,113,2","newaccount.php,25,4","next,7,1,66,2,70,1,68,1,69,1,76,1,92,1,94,5,95,1,96,1,108,1,118,1","nf,101,1","nformation,94,1","ni,111,1","nicaragua,25,2","nich-036-50,21,1","nich-1254-50,21,1","nich-1255-50,21,1","nich-1884-50,21,1","nich-1886-50,21,1","nich-255h,21,1","nichrome,1,2,21,22,100,1","nickel,22,3,100,1,114,2","nickel-chromium,21,1","niger,25,2","nigeria,25,2","nist,13,1,94,1","nitride,123,1","nitride-coated,121,1,123,1","niue,25,2","n-m,66,1,101,1,102,1,103,1,104,1,106,1,105,1,108,1,111,1","nn.nn,94,1","nnn.n,94,1","nnnn,94,1","no.30000,117,1","node,67,1,78,3,104,3,106,1","nodeaddress,103,1","node-address,103,2","nodeguard,103,1","nodes,64,1,65,1","noise,7,1,94,13","noisy,10,1","nom,121,2,123,1","nominal,10,1,17,4,66,1,70,1,68,1,101,1,102,1,103,1,104,1,106,1,105,1,108,1,110,1,113,1,121,2,123,2,124,1","non,111,1,124,2","non-adhesive,14,1,18,1","non-cancellation,79,1","non-condensing,92,1,94,1","nonconducting,100,1","non-contact,16,1,72,1,70,2,68,1,69,1,71,1,101,1,102,1,103,1,104,1,106,1,105,1,107,5,109,5,110,3,111,4,113,3","non-contacting,72,1,62,1,63,1,64,1,65,1,67,1,68,1,69,1,71,1","none,7,1,9,4,91,2,92,4,94,8,95,1,96,1,97,1,114,1,121,1,123,1,124,1","non-factory,94,1","non-ferrous,73,1,75,1,101,1,102,1,103,1,104,1,106,1,105,1,107,6,108,1,110,1,111,4,113,1","non-flammable,6,1,26,1,27,2,29,2,30,2,31,1,32,1,33,1,34,2,35,2,36,1,37,1,38,1,50,1,54,3,57,1,61,1","non-hazardous,119,1","noninductive,114,1,117,1","non-inductive,114,2","non-insulated,22,1","non-linearity,72,1,60,2,62,2,63,2,64,2,65,2,66,1,67,2,70,1,68,1,69,1,71,1,95,1,101,2,102,2,96,1,103,2,104,2,106,2,105,2,108,1,110,2,113,2,121,1,123,2","nonmagnetic,111,1","non-melting,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,50,1","non-modified,79,1","non-oily,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,42,1","non-repeatability,95,1,96,1,121,1,123,2","non-rtd,92,1,94,1","non-silicone,6,1,44,1,49,1,50,1,58,1,61,1","non-standard,121,1,123,2","non-stock,79,2,93,1","non-updated,79,1","non-use,12,1,13,1,16,2","non-voc,27,1,29,1,30,1,34,1,35,1","non-volatile,12,1,13,1,15,1,92,1","non-wear,107,1,109,1","nor,114,1,117,1,118,1,119,1","norfolk,25,2","normal,13,1,66,1,92,2,94,10,101,2,102,3,103,2,104,3,106,1,105,2,108,3","normally,79,1,94,11,114,2,117,1,118,2,124,1","north,25,2,92,2,107,1,109,1,111,1","northern,25,2","norway,25,2","noryl,92,1,94,1","note,39,1,47,1,56,1,22,1,24,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,70,1,69,1,79,1,89,1,93,1,94,11,101,5,102,11,103,6,104,4,106,2,105,2,107,1,108,23,109,2,111,1,113,1,114,7,115,1,118,1,119,7","noted,94,1","notes,66,1,73,1,74,1,75,1,77,1,78,1,94,2,101,3,102,2,103,1,104,2,106,1,105,1,107,4,108,8,109,4,110,2,111,3,113,2","nothing,93,1,119,1","notice,79,2,91,1,92,1,94,1,114,2,117,2,118,2,119,2","notification,121,1,123,1","notified,79,2","notify,79,2","npb,27,2,29,2,30,2,34,2,35,2","npt,84,1,81,2,86,2,95,1,96,1,119,1,121,1,123,1","nsf,13,1","nu,105,1","null,66,2,78,2,101,6,102,13,103,7,104,6,106,7,105,7,107,11,108,17,109,1,110,2,111,4,113,2","number,9,2,17,2,72,1,20,1,25,2,38,1,60,2,62,5,63,2,64,2,65,6,66,9,67,4,70,4,68,5,69,3,76,2,79,1,93,1,94,26,95,3,98,2,99,2,102,3,96,3,97,2,100,3,103,2,106,3,105,16,107,17,108,11,109,13,110,2,111,14,112,2,113,3,114,6,117,6,118,2,119,4,125,1","numbers,74,1,107,1,108,3,117,1","numep2a,110,1","numep2d,113,1","numerous,57,1,102,1","nut,66,1,73,2,101,1,102,1,103,1,104,1,106,1,105,1,108,1,109,2,110,2","nuts,94,1,109,2,119,1","ny,17,1,94,3,95,1,98,1,99,1,96,1,97,1,121,2,122,2,123,2,124,2,125,1","nylon,39,1,40,1,43,1,45,1","o.d,75,10,107,1,109,1,111,6","ø18,105,1","ø19.6,105,1","oal,17,4","object,103,5","objects,103,1","obligation,94,1","observed,94,2","obsolete,66,1","obtain,104,1","obtained,79,2,114,1","occur,17,2,94,2,119,1","ocean,25,2","octagonal,119,1","od,111,2,121,1,123,1","odd,92,1,94,1,124,1","odorless,26,1,31,1,32,1,33,1,36,1,37,1,38,1","oem,11,1","ºf,117,2","ofball-jointed,107,2","off,12,2,89,1,94,23,101,1,102,1,103,1,106,2,105,3,108,6,124,1","offer,6,1,7,1,23,1,62,1,63,1,64,1,65,1,67,1,68,1,69,1,100,1,104,1,107,1","offered,19,1,60,1,94,1,100,1,104,1","offers,6,8,7,4,8,4,9,4,10,4,11,4,12,4,13,4,14,5,15,4,16,4,17,4,39,4,47,4,56,4,72,4,18,5,19,4,20,4,21,5,22,4,26,5,27,5,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,4,40,4,41,4,42,4,43,4,44,4,45,4,46,4,48,4,49,4,50,4,51,4,52,4,53,4,54,4,55,4,57,4,58,4,59,4,60,4,62,4,63,4,64,4,65,4,67,4,70,5,68,5,69,5,71,4,73,4,74,4,84,4,75,4,76,4,77,4,78,4,81,4,82,4,83,4,85,4,86,4,87,4,88,5,89,4,90,4,91,4,93,5,95,4,98,4,99,4,101,3,102,2,96,4,97,4,103,1,104,1,106,1,105,1,108,3,111,1,114,1,115,1,119,1","office,1,1,23,2,94,1","officers,112,1","offices,119,1","off-road,11,1","offset,70,1,68,1,69,1,94,1,101,1,105,1,107,2,109,2,111,1,113,2,114,2","off-white,119,1","ohm,70,1,68,1,69,1,92,3,94,8,107,2,109,2,111,2,121,2,123,2","ohms,92,4,94,6,101,4,102,2,100,1,121,3,123,3,124,3","oil,6,1,11,1,44,11,51,1,52,1,53,1,54,1,55,1,61,1,66,1,76,2,94,1,95,2,96,2,97,2,108,1,121,2,122,2,123,4","oils,50,2","oily,56,1","old,20,1,73,3,94,1","older,7,2,66,1,75,2,108,1","oman,25,2","once,94,2","one,6,1,9,5,13,1,15,1,16,1,17,1,39,1,47,1,72,3,19,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,58,1,60,4,61,1,62,1,63,3,64,2,65,2,66,3,67,1,69,1,71,2,92,4,94,15,101,2,102,8,100,6,103,2,105,7,107,4,108,4,109,2,110,3,111,3,113,4,114,6,118,1","one-half,94,16","online,1,19,6,1,7,1","on-line&rdquo,54,1","onnormally,119,1","on-off,94,1","on-site,23,1,103,1","ontario,10,1","onto,17,1,107,1,109,1,110,2,113,2","open,62,1,64,1,65,1,66,1,75,2,77,1,79,5,89,1,90,5,94,9,101,2,102,2,104,1,105,4,108,1,114,2,117,1,118,4,119,2,124,2","opening,20,1,94,5,111,1,118,1,119,1","openings,94,6","open-ring,101,4,102,4,103,5,104,4,106,5,107,7,108,6,111,2","open-ring68,107,1","opens,84,2,81,4,82,4,83,2,85,2,86,6,87,4,89,3,93,13,114,15,117,1,119,3","operate,87,1,94,2,107,1,117,1,119,2","operated,19,5,100,1","operates,84,1,81,1,82,1,83,1,85,1,86,1,114,1","operating,9,1,10,1,13,1,60,2,62,2,63,2,64,2,65,2,66,4,67,2,70,2,68,2,69,2,84,2,81,2,82,2,83,2,85,2,86,2,92,3,94,5,101,4,102,3,103,3,104,3,106,3,105,3,107,6,108,4,109,3,110,2,111,8,113,2,114,1,118,2,124,2","operation,9,4,10,2,20,1,84,2,81,2,82,2,83,2,85,2,86,2,87,1,88,1,89,1,90,1,92,2,94,15,98,1,101,3,102,3,103,5,104,1,106,2,105,3,107,1,108,1,109,1,114,7,115,1,117,2,118,2,119,3,124,1","operational,7,1,66,2,108,2","operations,47,1,32,1,34,1,46,1,50,1,104,1","operator,9,2,94,1","opposed,118,7","opposed-horizontal,90,1","opposed-vertical,90,1","opt,121,1,123,2","optimal,107,1,110,1,113,1","optimum,70,1,111,1,117,1,119,1","option,9,4,20,1,62,1,66,1,67,1,70,1,68,1,69,1,76,4,92,5,94,15,95,1,101,9,102,9,103,11,104,7,106,6,105,9,107,6,108,19,109,6,111,5,121,1,124,1","optional,7,1,9,5,62,2,63,1,65,1,66,1,92,8,94,7,101,1,100,2,103,1,105,1,107,1,108,1,109,5,111,1,117,1,118,2,123,2,124,3","optional7mmdia.sensorrodforuseinsmallbore,111,1","optionr3,107,1,109,1,111,1","options,9,2,63,1,66,2,70,1,68,2,69,1,84,2,76,1,81,2,82,2,83,2,85,2,86,2,88,1,92,5,94,11,95,5,99,1,101,1,102,3,96,6,97,2,107,8,108,4,109,4,111,6,121,4,122,2,123,5,124,1","options-required,9,4","optocoupler,101,2","orange,23,1,63,1,101,1,106,1,119,2","order,1,19,4,4,6,2,7,2,9,6,10,1,12,1,13,1,14,1,15,1,16,4,17,2,39,6,47,6,56,6,72,1,18,1,19,1,20,1,21,2,22,11,26,7,27,7,29,7,30,7,31,7,32,7,33,7,34,7,35,7,36,7,37,7,38,7,40,6,41,6,42,6,43,6,44,6,45,6,46,6,48,6,49,6,50,6,51,6,52,6,53,6,54,6,55,6,57,6,58,6,59,6,60,2,62,3,63,2,64,2,65,3,66,2,67,3,70,1,68,1,69,2,71,1,73,5,74,1,84,1,75,1,76,1,77,1,78,1,79,4,81,1,82,1,83,1,85,1,86,1,87,2,88,1,89,1,90,1,91,2,92,1,94,4,95,2,98,2,99,2,101,2,102,2,96,2,97,2,100,1,103,3,104,1,106,2,105,2,107,2,108,2,109,2,110,1,111,2,113,1,114,4,117,2,118,2,119,1,125,1","ordered,39,1,47,1,56,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,2,63,1,64,1,65,1,66,1,67,2,69,1,79,3,94,2,101,2,102,8,103,3,104,3,106,2,105,2,107,4,108,1,109,1,111,5,114,8,117,1,118,1","order--find,93,1","ordering,9,2,12,1,13,1,15,1,16,1,17,1,39,1,47,1,56,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,3,68,3,69,3,76,1,90,1,93,1,95,2,98,1,99,1,102,1,96,2,97,1,107,13,109,3,110,1,111,7,114,3,117,4,121,2,122,1,123,3,124,2,125,4","orders,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,79,3,112,1","ordinary,119,7","organization,103,1","organo-modified,43,1","organo-silicone,47,1","orientation,63,1,101,2,102,1,106,1,105,1,107,2,110,2,111,1,113,2","orientations,109,1","oriented,103,1,104,1","origin,79,1","original,7,1,79,1","o-ring,77,1,101,2,102,2,103,2,104,2,106,2,105,2,108,2,111,1","os,84,1,78,1,81,1,82,1,83,1,85,1,86,1","otherwise,92,1,112,2,114,4,117,1","ounces,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,88,1,114,10,115,4","ouput,108,1,110,1","out2,94,1","outer,19,1,84,2,81,2,82,2,83,2,85,2,86,2,87,1,89,1,91,1,93,1,94,4,100,4,114,2,117,1,119,1","outlast,7,2","outlet,10,1,103,1","outline,117,1,118,1","outlying,25,2","out-of-stock,10,1,12,1,13,1,15,1,19,1,20,1,73,1,74,1,84,1,75,1,77,1,78,1,81,1,82,1,83,1,85,1,86,1,90,1,91,1","output,7,10,9,4,72,27,60,22,62,4,63,7,64,4,65,6,66,9,67,4,70,16,68,15,69,7,71,24,74,4,78,3,92,1,94,42,95,1,98,1,99,5,101,5,102,61,96,1,97,1,103,6,104,7,106,3,105,7,107,44,108,33,109,28,110,8,111,42,113,10,121,4,123,5,124,13","outputs,7,4,9,2,60,5,62,1,66,6,67,1,70,2,68,1,69,1,92,5,94,12,101,2,102,11,103,3,104,1,106,1,105,1,107,17,108,18,109,9,110,1,111,25,113,2","outside,94,4,101,1,107,1,109,1,110,1,111,1,113,1,114,2","outstanding,6,1,72,1,70,1,71,1,107,1,109,1,110,1,111,1,113,1","outward,20,1","ov3ho.ae,119,1","oval,118,2","oven,9,1,92,1","ovens,22,1,119,1","overall,20,2,94,1,109,1,114,1","overcome,67,1,106,1,114,1","overhead,60,1,62,1,63,1,64,1,65,1,67,1","overheat,93,1,119,3","overlapping,89,1,91,1,117,1","overnight,58,1","over-pressure,17,5,98,4,99,4","overshoot,84,1,81,1,82,1,83,1,85,1,86,1,114,1","overstampling,106,1","overview,94,2,109,1","overvoltage,101,1,102,1,103,1,104,1,106,1,105,1,110,1,113,1","overvoltageprotectionto36vdcandpolarityprotection,107,1,109,1,111,1","owners,107,1,109,1,110,1,111,1,112,1,113,1","oxide,94,1","oz,119,6","ozone,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,50,1","p.m,79,1","p.s.i,88,2","p0,76,1","p05,62,1,63,1,101,1,103,1","p101,65,1,105,1","p103,65,1,105,1","p1hi,94,1","p1lo,94,3","p2hi,94,2","p2lo,94,1","pacemaker,1,4","pacific,79,1","pack,22,6","package,9,1,66,1,98,1,99,1,108,1,109,1","packaging,1,31,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,6,15,1,16,1,17,1,39,1,47,1,56,1,72,1,18,6,19,1,20,1,21,1,22,1,23,10,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,73,1,74,1,84,1,75,1,76,1,77,1,78,1,79,9,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1,107,1,109,1,111,1,125,1","packing,79,1,114,2","page,1,3,2,1,3,1,5,1,6,2,7,4,8,3,9,4,10,3,11,3,12,3,13,3,14,2,15,3,16,4,17,4,39,4,47,4,56,4,72,3,18,2,19,3,20,3,21,2,22,2,23,2,24,1,25,4,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,4,40,4,41,4,42,4,43,4,44,4,45,4,46,4,48,4,49,4,50,4,51,4,52,4,53,4,54,4,55,4,57,4,58,4,59,4,60,4,61,2,62,5,63,4,64,4,65,5,66,4,67,5,70,5,68,5,69,4,71,3,73,3,74,3,84,3,75,3,76,4,77,3,78,3,79,2,80,1,81,3,82,3,83,3,85,3,86,3,87,3,88,3,89,3,90,3,91,3,93,3,94,1,95,5,98,4,99,4,101,4,102,6,96,5,97,4,103,3,104,3,106,3,105,2,108,17,110,3,113,4,114,9,115,1,117,2,118,5,119,5,125,3","pages,102,1,114,1,119,1","paid,79,1","paint,114,1,119,1","paintable,6,7,26,1,27,1,29,1,30,1,31,1,32,2,33,1,34,2,36,1,37,1,38,1,41,11,42,10,43,10,44,2,45,10,48,10,50,2,61,5","paintables,39,1,47,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1","painting,47,1,46,1,48,1","pair,72,2,71,2,84,1,77,2,81,1,82,1,83,1,85,1,86,1,110,1,113,1,114,1","pairs,94,2,107,1,109,1,111,1","pakistan,25,2","palau,25,2","palm,78,1","palmdale,23,1","panama,25,2","panel,9,3,92,8,94,17,99,1,124,2","panel-mount,98,1,99,1","panels,10,1","paper,9,4,94,1","papua,25,2","parafilm,26,4,27,4,29,4,30,4,31,4,33,4","paragraphs,94,1","paraguay,25,2","parallel,94,3,114,1,118,4","parallel-serial,101,1","parameter,70,2,68,1,69,1,78,1,94,20,102,1,105,2,107,6,108,1,109,6,111,6,113,6","parameters,9,2,66,1,70,1,68,1,69,1,91,1,92,2,94,9,101,4,102,2,103,3,104,4,106,2,105,4,107,5,108,4,109,5,110,2,111,5,113,4,114,1,115,1","parent,112,1","parfilm,1,1,6,10,26,19,27,19,29,19,30,19,31,19,33,19,61,6","parfilms,6,1","parity,63,2,92,1,94,1,101,2,124,1","park,94,4","part,7,2,12,1,13,1,14,1,15,1,39,1,47,1,72,1,18,1,19,1,21,1,22,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,54,1,70,2,68,2,69,2,71,1,73,5,74,4,84,1,75,3,76,1,77,4,78,5,81,1,82,1,83,1,85,1,86,1,88,1,89,1,90,1,94,1,95,1,101,8,102,9,96,1,103,7,104,6,106,7,105,19,107,39,108,17,109,20,110,7,111,22,113,10,125,1","particular,17,1,72,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,94,1,95,1,98,1,99,1,102,1,96,1,97,1,107,1,113,1,114,1,117,1,118,1,119,1","partitions,119,1","partlow,1,1,9,24,92,2,94,5","partlow.custserv@dancon.com,92,1","partlow.techsupport@dancon.com,92,1","partlow-mrc5000-chart-recorders.php,9,4","partlow-mrc5000-manual.pdf,94,4","partlow-mrc5000-specs,92,4","partlow-mrc5000-specs.pdf,92,4","partlowtm,92,4","partlowwest,94,2","partlow-west,94,13","partnership,112,1","parts,1,2,7,1,94,1,20,1,23,1,84,1,81,1,82,1,83,1,85,1,86,1,114,3","party,94,1","pass,94,1","passes,79,2,107,1,109,1,110,1,111,1,113,1","passivating,58,1","password,2,1,3,1,25,2","past,15,1,20,1","patent,110,1,113,1","patents,110,1,113,1","path,87,1","pattern,94,1,49,1","patterns,44,1","pay,94,1","payable,112,1","payment,79,1","pc,9,2,78,11,101,1,102,3,104,1,108,1","pc02e-12-8p,95,1,96,1,121,3,123,4","pc06a-12-8s,121,1,123,1","pcs,109,1","pd-anti-stick-4.php,37,4","pd-blue-label-3.php,34,4","pd-blue-label-4.php,32,4","pd-clean-it-10.php,51,4","pd-clean-it-11.php,52,4","pd-clean-it-12.php,55,4","pd-clean-it-13.php,53,4","pd-clean-it-14.php,54,4","pd-clean-it-15.php,57,4","pd-clean-it-16.php,56,4","pd-eject-it-24.php,42,4","pd-eject-it-31.php,48,4","pd-eject-it-32.php,47,4","pd-eject-it-33.php,49,4","pd-eject-it-34.php,50,4","pd-eject-it-e20-3.php,40,4","pd-eject-it-e20-6.php,39,4","pd-eject-it-e21.php,43,4","pd-eject-it-e23.php,41,4","pd-eject-it-e25.php,45,4","pd-eject-it-e26.php,44,4","pd-eject-it-e28.php,46,4","pd-epoxy-parfilm-3.php,27,4","pd-epoxy-parfilm-4.php,26,4","pdf,6,1,9,2,72,1,19,1,60,1,62,1,63,1,64,1,65,1,67,1,70,1,68,1,71,1,84,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,99,1,96,1,97,1","pdo,103,3","pdos,103,1","pd-polyester-parfilm-3.php,30,4","pd-polyester-parfilm-4.php,31,4","pd-polypropylene-4.php,38,4","pd-protect-it-60.php,58,4","pd-rust-inhibitor-spray.php,59,4","pd-sample-request.php,61,4","pd-urethane-parfilm-3.php,29,4","pd-urethane-parfilm-4.php,33,4","pd-yellow-label-3.php,35,4","pd-yellow-label-4.php,36,4","pe,39,1,40,1","peak,101,2,102,2,111,4,124,2","pen,9,23,15,2,94,113,92,14","pen1,94,3","pen2,94,2","penalty,79,1","pending,9,1,94,4,106,2,110,1,113,1","penetrates,53,1","pens,9,2,94,17","people,114,1","peoples,25,2","per,13,1,94,8,18,1,21,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,2,60,1,61,1,62,1,63,1,64,1,65,3,79,1,91,1,92,1,101,1,100,1,103,1,106,1,105,1,107,1,111,1,114,2,117,1,119,4,121,1,123,1,124,4","per°c,94,1","percent,94,1","perform,100,1,107,1,109,1,111,1","performance,6,1,7,1,8,1,10,2,39,1,47,1,72,1,94,3,40,1,41,1,42,1,43,1,44,1,45,1,46,2,48,1,49,1,50,1,63,2,70,2,71,1,92,1,101,1,107,2,109,3,110,2,111,2,113,2,117,1,119,1,121,1,123,1,124,1","performed,94,6,102,1,105,1","performing,7,1","performs,94,1","period,94,1,79,2","periodic,7,1","permanent,107,2,109,3,110,2,111,2,113,2","permission,94,1","permit,112,1,118,1","permits,10,1,47,1,88,1,114,2,115,1","perpendicular,107,1,110,1,113,1","personnel,17,1,94,1,93,1,119,1","peru,25,2","peter,23,1","peter@westcoastplastics.com,23,1","petrolease,6,1,49,11,61,1","pg7,74,1","pg9,74,2,103,1,105,2,107,4,109,4,111,3","pg9for6-8mmdia.cable,111,1","ph,92,1,121,1,123,1","phase,94,1,92,1","phenolic,42,1,43,1,45,1","phenolics,50,1","phenomenon,94,1","philippines,25,2","phone,1,1,23,5,24,1,25,2,61,1,80,1,92,1,100,1,112,6","photo,107,2,109,3,111,3,114,1","phrase,5,1","physical,67,1,92,1,106,1,114,1,119,1,124,2","pi,43,1","pickup,79,1","piece,17,1,26,1,27,1,50,1","pieces,100,1","pierced,10,1","pierre,25,2","pigtail,60,2,62,1,63,3,66,2,73,4,76,1,101,3,102,2,103,1,106,1,107,4,108,2,109,4,111,4,121,1,123,1","pin,56,1,67,1,101,2,102,3,103,2,104,1,106,4,105,7,107,2,108,8,109,2,111,2,113,2,121,1,123,1","pink,101,2,102,1,103,1,107,1,108,1,109,1,111,1,113,1","pinout,105,1,107,1,108,1,109,1,111,1,113,1","pin-out,102,1,103,2,104,1,105,5","pins,102,3","pioneered,7,4,72,4,60,4,62,4,63,4,64,4,65,4,67,4,70,4,68,5,69,5,71,4,73,4,74,4,75,4,76,4,77,4,78,4","pioneering,23,1","pioneers,6,1","pipe,10,2,94,1,60,6,62,6,63,6,64,6,65,6,67,1,84,1,81,2,86,1,87,2,114,3","pipes,10,2","piston,111,7","pitcairn,25,2","pivot,94,1","pk,22,6","place,9,1,94,2,35,1,36,1,92,1,102,1","placed,94,2,79,1,111,1","placement,94,1","placing,9,1,17,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,79,1,95,1,98,1,99,1,96,1,97,1","plant,7,1,10,1","plants,72,1,71,1,110,1,113,1","plastic,10,2,11,14,13,1,17,4,27,1,29,1,30,1,34,1,35,1,59,1,95,10,98,4,99,4,96,10,97,15,117,1,121,2,122,3,123,3","plastic.,95,4,96,4,97,4","plastics,1,22,2,1,3,1,5,1,6,23,7,13,8,17,9,13,10,14,11,21,12,13,13,13,14,14,15,13,16,13,17,18,39,13,47,14,56,14,72,13,18,14,19,13,20,13,21,14,22,14,23,16,24,5,25,1,26,16,27,14,29,14,30,14,31,16,32,17,33,16,34,15,35,14,36,16,37,16,38,16,40,13,41,14,42,13,43,14,44,13,45,13,46,13,48,13,49,13,50,14,51,14,52,14,53,14,54,14,55,14,57,14,58,13,59,13,60,14,61,5,62,14,63,14,64,14,65,14,66,6,67,14,70,13,68,13,69,13,71,13,73,13,74,13,84,13,75,13,76,13,77,13,78,13,79,16,80,5,81,13,82,13,83,13,85,13,86,13,87,17,88,13,89,17,90,17,91,13,93,17,95,14,98,18,99,18,96,14,97,14,112,3,125,1","plastics.,39,4,47,4,56,4,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,4,40,4,41,4,42,4,43,4,44,4,45,4,46,4,48,4,49,4,50,4,51,4,52,4,53,4,54,4,55,4,57,4,58,4,59,4","plate,94,5,20,1,91,1,92,2,107,2,110,1,113,1","plated,22,3,114,1,121,1","platen,94,3","platens,14,5,18,5,114,1,117,1","plates,14,1,18,1","plates.,14,4,18,4","platform,66,2,108,2","plating,91,1,114,3","platings,88,1,114,1,115,1","platinum,94,1,49,1,92,1","play,104,2","plc,104,1","pleasant,55,1","plug,17,9,84,1,81,1,82,1,83,1,85,1,86,1,100,1,104,2","plugs,11,1,17,2,95,1,96,1,97,2,100,2,122,1","plus,1,1,12,8,94,10,60,1,67,1,81,1,92,1,106,2,105,2,107,2,111,2,114,1","pmatm,92,3","pmr,6,1,47,10,61,1","po,24,1,61,1,80,1,111,1","po5,103,1","pocket,1,1,15,20","point,16,1,94,5,84,1,81,1,82,1,83,1,85,1,86,1,91,1,93,2,112,1,114,5,118,1,119,2","point.,84,4,81,4,82,4,83,4,85,4,86,4,87,4,88,4,89,4,91,4","points,94,3,62,1,103,1,109,1,114,1","poland,25,2","polarity,13,1,101,1,102,1,103,1,104,1,106,1,105,1,107,1,109,1,110,1,111,1,113,1","pole,90,1,121,1","policies,79,1","policy,79,2,92,1,112,1","polish,87,1","polished,59,1","polling,104,1","pollutants,7,1","polycarbonate,6,1,39,1,40,1,43,1,45,1,48,11,61,1","polyester,6,2,30,26,31,26,42,1,45,1,61,2","polyesters,41,1","polyethylene,45,1","polynesia,25,2","polyphenelene,118,1","polypropylene,6,1,38,20,45,1","polypropylenes,61,1","polystyrene,39,1,47,1,40,1,45,1","polyurethane,39,1,40,1,42,1,45,1,63,1,66,1,76,2,101,1,102,1,108,2","polyurethanes,41,1","polyvinyl,26,1,27,1,45,1,114,1","popcorn,117,1","popular,15,1","port,9,3,17,1,94,5,92,4,111,1,121,3,123,2","portion,94,1,79,1,114,1,124,1","portugal,25,2","position,1,6,7,18,72,16,94,29,23,4,60,17,62,13,63,12,64,14,65,15,66,14,67,16,70,16,68,19,69,16,71,13,73,8,74,9,75,8,76,8,77,8,78,9,79,4,90,2,92,2,93,1,101,9,102,28,103,13,104,7,106,10,105,13,107,29,108,16,109,16,110,12,111,26,113,14,114,1,119,1","positioned,9,1,94,3","positioning,94,1","positions,94,7,62,1,65,4,66,1,67,1,102,2,103,3,106,2,105,6,108,1,118,2","positive,94,2,102,3,118,1","possibility,114,1","possible,94,8,48,1,67,1,79,1,88,1,102,1,106,1,107,1,108,1,109,2,111,1,113,1,114,4,115,1,117,1,118,1,119,1","post,47,1,32,2,34,2,43,1,46,1,48,1","postage,24,1,80,1","postal,24,1,61,1,80,1","postion,60,1","post-molding,50,1","post-run&rdquo,57,1","pot,7,5,72,4,60,4,62,4,63,4,64,4,65,4,67,4,70,4,68,4,69,4,71,4,73,4,74,4,75,4,76,4,77,4,78,4","potential,94,1","potentiometer,7,4,72,4,60,4,62,4,63,4,64,4,65,4,67,4,70,4,68,4,69,4,71,4,73,4,74,4,75,4,76,4,77,4,78,4","potentiometers,7,3,68,1,69,1,107,1,109,1","pots,7,6,68,1,69,1","potted,95,1,96,1,121,1,123,1","pound,114,2","pounds,121,1,123,1","power,1,1,7,1,9,3,94,36,19,1,23,1,53,1,60,1,62,1,63,1,64,1,65,1,66,2,67,1,70,1,68,1,69,1,77,3,78,4,89,1,92,7,98,2,99,2,101,2,102,1,100,2,103,4,106,3,105,5,107,3,108,5,109,3,110,1,111,4,113,1,118,1,124,5","power-down,68,1,69,1","powered,98,1","powerful,12,1,15,1,51,1,65,1,105,1","power-hot-dc,94,1","power-neutral-dc,94,1","power-up,94,1","pp,39,1,40,1,43,1","ppm,101,1,102,1,103,1,104,1,106,1,105,1","practical,7,1","practices,94,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1","precise,7,1,60,1,62,1,63,1,64,1,65,1,67,1,68,1,69,1,90,4,107,1,109,1","precisely,68,1,69,1,93,1,119,1","precision,35,1,36,1,59,1,60,1,62,1,63,1,64,1,65,1,67,1,90,1,107,1,109,1,110,1,111,1,113,1,118,2","preclude,94,1,114,1","preconfigured,101,1,102,1,108,1","predetermined,93,1,118,1,119,1","preferred,1,1,72,1,94,1,23,1,70,1,69,2,71,1,107,1,109,3,110,1,111,2,113,1","prefix,94,1","prepaid,79,1","preparation,94,2","prepared,111,1","pre-pay,94,1","preprocessing,60,1,62,1,63,1,64,1,65,1,67,1","pre-run&rdquo,57,1","present,94,10","preset,15,1,94,1,103,1,105,1,114,4,117,1,118,1,119,1","press,94,23,125,1","pressed,94,1","presses,72,2,71,2,110,2,113,2,114,1,117,1","pressing,94,3,103,1,105,1","pressure,1,1,11,29,17,22,60,6,62,6,63,6,64,6,65,6,66,4,67,5,70,2,88,2,91,3,95,40,98,37,99,35,101,6,102,6,96,39,97,57,103,6,104,6,106,6,105,6,108,6,111,5,114,9,115,5,117,1,121,14,122,19,123,16,124,4","pressures,17,1,101,1","prevalent,119,1","prevent,13,1,59,1,111,1,114,2","preventer,59,1,61,1","preventing,107,1,109,1,111,1,113,1","prevents,107,1,109,1","previous,70,1,68,1,69,1,74,1,102,1,107,2,108,1,109,2,111,2","previously,94,1","price,9,1,10,1,12,1,13,1,14,1,15,1,16,1,39,2,47,2,56,1,72,1,94,2,18,1,19,1,20,1,21,1,22,1,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,2,50,2,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,66,1,67,1,70,1,68,1,69,1,71,1,73,5,74,1,84,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,2,90,1,91,1,93,2,95,2,96,2,125,1","priced,7,2,92,1","price-driscol,30,4","price-driscoll,1,9,6,22,39,17,47,17,56,17,23,4,24,1,26,16,27,16,29,16,30,12,31,16,32,16,33,16,34,16,35,16,36,16,37,16,38,16,40,17,41,17,42,17,43,17,44,17,45,17,46,17,48,17,49,17,50,17,51,17,52,17,53,17,54,17,55,17,57,18,58,16,59,16,61,2,79,4,80,1","price-driscoll-brochure.pdf,28,4","price-driscoll-mold-release.php,6,4","pricelist,100,1","prices,79,3","pricing,68,1,69,1,84,1,79,1,81,1,82,1,83,1,85,1,86,1,95,1,96,1","primarily,42,1","primary,37,1,66,1,108,1","principal,114,1,117,1","principe,25,2","principle,11,1,72,1,70,1,68,1,69,1,71,1,84,1,81,1,82,1,83,1,85,1,86,1,87,1,89,1,95,1,96,1,97,1,107,3,109,3,110,2,111,3,113,2,114,1,122,1,123,1","printed,100,1,107,1,109,1,110,1,111,1,113,1,114,1,117,1,118,1,119,1","printers,114,1","printing,48,1","prior,50,1,59,1,79,7,121,1,123,1","priority,104,1","probe,11,4,12,10,13,15,15,4,16,6,94,2,95,6,96,4,97,5,114,8,115,1,121,1","probes,13,1,16,1","problem,7,2,94,1,87,1","problems,114,1,117,1,118,1,119,1","procedure,94,1","procedures,118,1","proceed,94,2","proceeding,94,4","process,1,1,9,8,10,1,13,1,17,1,94,28,20,5,23,1,92,9,98,2,97,1,99,1,103,1,107,1,111,1,119,1,122,1","processes.,17,4,98,4,99,4","processing,6,1,9,1,60,2,61,1,62,2,63,2,64,2,65,2,67,2,92,1,114,2,118,1","processors,97,4,122,4","produce,15,1,72,1,94,2,71,1,110,1,114,1,118,1","produced,94,1,60,3,84,1,81,1,82,1,83,1,85,1,86,1,102,3,108,1,114,3","produces,47,1,46,1,48,1","product,6,1,9,1,11,1,16,1,94,1,59,1,66,1,78,1,79,11,91,1,92,2,95,1,101,6,102,6,96,1,97,1,103,6,104,4,106,6,105,6,107,16,108,9,109,15,110,3,111,14,113,3,114,1,121,3,122,1,123,4,124,1","production,26,1,31,1,32,1,33,1,36,1,37,1,38,1","productions,79,1","productive,26,1,31,1,32,1,33,1,36,1,37,1,38,1","productivity,7,2,66,1,35,1,36,1,50,1,108,1,109,1","productoverview,107,1,111,1","products,6,5,8,2,15,1,39,3,47,3,56,2,66,2,94,12,26,1,27,3,29,3,30,3,31,1,32,1,33,1,34,3,35,3,36,1,37,1,38,1,40,3,41,3,42,3,43,3,44,3,45,3,46,3,48,3,49,3,50,3,51,1,52,1,53,1,54,1,55,1,57,1,58,4,59,15,77,1,79,6,108,3,117,1","profibus,7,2,65,7,74,3,78,5,105,18","profibus-dp,65,5,105,16","profile,7,8,66,5,60,4,62,5,63,4,64,4,65,4,67,5,68,2,101,3,102,3,103,5,104,3,106,3,105,4,107,5,108,3","profiles,103,2","profile-style,7,3,60,1,62,1,63,1,64,1,65,1,67,1,70,4,68,7,101,5,102,4,103,3,104,3,106,3,105,2,107,7,108,5,113,2","profits,7,1,35,1,36,1","profubus-dp,65,1","prog,94,8,92,1","program,9,1,94,16,92,2,102,1,114,1,117,1,118,1","programmability,7,1,66,3,101,1,102,2,107,2,108,3,109,2","programmable,62,1,101,1,104,1,108,1","programmed,94,1,102,2,108,1","programmer,78,5,102,5,103,11,105,12,108,2","programming,7,1,9,2,66,3,94,10,78,8,92,2,101,6,102,10,103,3,104,1,105,3,108,18","prohibited,94,1","promote,94,1","prompting,9,1","proof,84,1,81,1,82,1,83,1,85,1,86,1,91,10,93,1,114,1,121,1,123,1","propellant,46,1","propellants,26,1,31,1,32,1,33,1,36,1,37,2,38,1","proper,72,1,94,7,92,1,101,1,102,3,103,1,107,2,108,1,111,2,113,2","properly,94,2,114,1","property,94,1,107,1,109,1,110,1,111,1,113,1,114,1","proportional,72,2,71,1,107,3,108,2,109,3,110,1,111,3,113,2","proprietorship,112,1","protect,20,1,58,2,59,1,88,1,114,2,115,1,117,1,119,1","protected,13,1,94,1,109,2","protecting,17,1","protection,17,5,94,1,19,1,58,3,70,2,88,1,92,2,93,9,98,4,101,3,102,2,99,4,100,1,103,2,104,2,106,2,107,13,105,2,109,14,110,3,111,15,113,3,114,3,115,1,118,2,119,4,124,1","protect-it,6,1,58,23,61,1","protective,8,1,94,1,84,1,81,1,82,1,83,1,85,1,86,1,88,6,91,1,106,1,114,3,115,1","protects,9,2,94,1","protocol,94,2,62,2,64,2,65,1,92,1,101,1,102,1,103,4,104,8,107,1,105,2,109,1,111,1,113,1","protocols,124,1","prototyping,49,1","protrusion,9,1,94,1,92,2","proud,66,1,108,1","proven,7,1,11,1,94,1,26,2,27,1,29,1,30,1,31,2,32,2,33,2,34,1,35,1,36,2,37,2,38,2,42,1,60,1,62,1,63,1,64,1,65,1,67,1,68,1,69,1,82,1,95,1,96,1,97,1,109,1,114,1,122,1,123,1","provide,8,1,11,1,66,1,72,1,94,1,23,1,60,1,87,1,89,1,90,1,98,1,101,2,102,4,99,1,100,1,103,2,104,2,106,1,107,1,105,2,108,6,111,1,113,3,114,2,117,1,118,3,119,1","provided,94,8,79,1,89,1,90,2,91,1,100,1,107,1,108,1,109,1,110,2,113,3,114,1,117,2,119,3,123,1","provides,9,2,11,1,17,1,47,1,94,3,48,1,58,1,63,1,64,1,65,1,67,1,70,1,92,2,93,1,95,1,101,2,102,1,96,1,97,1,100,1,103,3,104,2,106,1,105,2,108,1,110,1,111,4,113,1,114,1,118,1,119,1,122,1,123,1","providing,7,1,66,1,94,1,19,1,91,1,102,2,100,1,107,1,108,1,109,1","provids,19,1","provision,114,1","prudent,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1","ps,43,1","psi,17,12,66,1,91,2,95,9,101,4,102,4,96,9,97,9,103,4,104,4,106,4,105,4,108,4,111,5,114,10,115,7,121,5,122,1,123,8","psig,17,1,121,1","pst,1,1,23,1","pt06a-10-6s,121,1,123,1","pt100,94,1,124,2","ptih-10-6p,95,1,96,1,121,4,123,5","public,119,1","publication,94,1","published,94,1","puerto,25,2","pull,94,1,114,1","pulse,7,5,66,6,72,2,63,1,70,1,68,1,69,1,78,1,101,1,107,12,108,9,109,12,110,5,111,12,113,13","pulses,107,1,108,1,109,1,111,1,113,1","pulse-train,101,1","pulse-width,66,2","pumping,10,1","pur,66,3,41,1,60,1,73,4,103,1,106,3,107,4,108,4,109,4,111,4","purchase,72,1,94,1,71,1,79,3,93,1","purchased,70,1,68,1,79,1,107,1,111,1","purchaser,94,2,79,2,114,1,117,1,118,1,119,1","purchases,94,1","pure,44,1","purge,20,1,59,1","purity,56,1","purport,114,1,117,1,118,1,119,1","purpose,6,4,39,6,94,2,40,6,43,6,51,2,61,2","purposes,81,1,87,2,114,1,117,1,118,1,119,1","push,94,1,91,1,99,1,124,1","puts,19,1,100,1","pvc,10,2,66,3,60,1,76,2,102,1,108,3,110,2,114,2,118,1","pw,108,1","pwm,66,4,108,20","qatar,25,2","qj,121,1,123,1","qty,10,17,12,2,13,4,14,11,15,2,16,2,39,2,47,2,56,2,72,15,18,27,19,61,20,9,21,6,22,15,26,3,27,3,29,3,30,3,31,3,32,3,33,3,34,3,35,3,36,3,37,3,38,3,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,2,50,2,51,2,52,2,53,2,54,2,55,2,57,2,58,2,59,2,71,15,73,26,84,4,74,17,75,15,77,10,78,12,81,6,82,7,83,4,85,4,86,10,87,7,88,4,89,3,90,4,91,14","qualification,106,1","qualified,39,1,47,1,66,1,94,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,101,1,102,1,103,1,104,1,107,1,105,1,108,1,109,1,110,1,111,1,113,1","qualify,79,1","quality,1,1,7,1,8,2,22,1,23,1,50,1,67,1,95,1,96,1,106,1","quantities,90,1,114,1,117,1","quantity,10,1,12,1,13,1,14,1,15,1,16,2,39,3,47,3,56,3,72,1,18,1,19,1,20,1,21,1,22,1,26,5,27,5,29,5,30,5,31,5,32,5,33,5,34,5,35,5,36,5,37,5,38,5,40,3,41,3,42,3,43,3,44,3,45,3,46,3,48,3,49,3,50,3,51,3,52,3,53,3,54,3,55,3,57,3,58,3,59,3,71,1,73,5,84,1,74,1,75,1,77,1,78,1,79,3,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,102,1,105,1,125,1","questions,17,1,66,1,60,1,62,1,63,1,64,1,65,1,67,1,95,1,98,1,96,1,97,1,99,1","quick,9,2,55,1,90,3,95,3,96,3,104,1,118,4","quickly,12,1,60,1,62,1,63,1,64,1,65,1,67,1,100,1","quick-ship,90,8","quote,14,2,18,2,95,1,96,1","quxy,94,1,92,1","r.h,92,1","r0,66,2,70,1,68,1,69,1,107,2,109,2,111,2","r05,66,1,60,1,102,1","r3,70,1,68,1,69,2,107,4,109,4,111,4","radio,90,1,118,1","radius,60,1,63,1,107,1","raised-face,66,1,60,1,62,1,63,1,64,1,65,1,101,2,102,2,103,1,104,2,106,2,105,2,108,2","raised-faced,67,1,101,1,102,1,103,2,104,1,106,1,105,1,108,1","rang,94,5","range,12,3,13,2,16,1,17,4,56,1,66,6,72,1,94,16,20,1,55,1,60,12,62,5,63,4,64,4,65,6,67,5,70,4,68,4,69,4,71,1,84,1,81,1,82,1,83,1,85,1,86,1,87,2,89,1,91,3,92,3,95,3,102,18,96,3,97,3,103,5,106,4,107,5,105,6,108,4,109,5,110,4,111,5,113,4,114,4,117,4,119,1,121,4,122,1,123,4,124,3","ranger,67,1","ranges,94,8,70,1,69,1,89,1,91,3,95,1,102,1,96,1,107,3,108,1,109,2,110,2,111,3,113,2,117,1,118,1,121,1,122,1,123,2,124,1","rapid,9,1,17,1,84,1,81,1,82,1,83,1,85,1,86,1,90,1,114,2,118,1","rapidly,93,2,119,2","rate,94,3,62,3,64,1,65,1,67,3,89,1,91,1,92,2,93,6,101,1,103,3,104,4,106,3,105,2,114,2,115,1,117,1,119,8,124,4","rated,13,2,94,1,22,3,92,1,114,2,118,1","rate-of-rise,93,1,119,6","rates,7,2,67,1,106,1","rather,87,1,100,1","rating,9,1,13,1,66,2,94,1,67,1,87,1,89,3,90,1,91,1,93,1,101,2,102,2,103,2,104,2,106,3,107,1,105,2,108,3,109,1,110,1,111,1,112,1,113,1,114,5,117,2,118,1,119,4,124,2","ratings,17,1,22,1,88,1,90,1,91,1,92,1,96,1,111,1,114,10,115,4,117,2,118,2,119,1,123,1","ratio,16,1","rb,66,2,74,2,108,6","rb1,66,1,108,1","rb2,66,1,108,1","rc,94,3,74,2","rd,111,1","rdeb,11,1,17,7","reach,114,3","reaches,90,1,118,1","react,94,1,93,1,119,1","reaction,119,1","read,94,1,92,1,117,1","readily,95,1,96,1,97,1,122,1,123,1","reading,16,2,94,4,110,1,113,1,124,1","ready,119,1","ready-to-ship,22,1","real,95,4,96,4,97,4","realize,117,1,119,1","real-time,101,1,103,1","reamed,82,2,87,1,114,2","reason,7,1","reattach,94,1","rec,94,8","recalibrated,13,1","recalibration,12,2,107,1,109,1,110,1,111,1,113,1","receipt,94,1","receive,66,1","received,101,1,114,1","recirculated,10,1","recirculations,66,1,108,2","recognized,47,1,48,1,84,1,81,3,82,4,83,1,85,1,86,4,89,1,90,1,114,2,117,2,118,1","recommended,94,3,26,1,27,1,58,1,69,1,88,1,101,1,110,1,111,2,113,1,114,3,115,1","recommends,101,1,102,1,103,1,107,1,108,1,109,1","record,94,2,79,1,92,2","recorder,9,24,94,57,92,10","recorders,1,1,9,14,94,2,92,4","recording,9,4,94,7,92,11","records,94,1,98,2,124,2","red,94,15,92,3,98,1,101,3,102,3,99,1,103,3,104,3,106,2,107,1,105,4,108,2,109,1,111,1,113,1,119,2,121,1,123,1,124,4","re-disking,17,1","reduce,7,1,60,1,62,1,63,1,64,1,65,1,67,1,84,1,81,1,82,1,83,1,85,1,86,1,107,1,114,1","reduced,7,1,15,2,102,1","reduces,11,1,93,1,95,1,96,1,97,1,119,1,122,1,123,1","ref,94,4,123,2","refer,94,2,79,1,93,1,101,2,102,2,103,2,104,2,106,1,107,5,105,1,108,11,110,1,111,7,113,1,119,2","reference,94,8,101,1,102,1,103,2,104,1,106,1,107,12,105,1,108,7,109,8,111,9","references,107,4,109,1,111,2,112,2","referred,94,1,114,1,117,1,118,1,119,1","refined,44,1","reflect,94,1,121,1,123,1,124,1","reflection,108,1,113,1","reflection´,107,1,109,1,111,1","refrigeration,118,1","regardless,10,1,93,1,119,1","register,2,1,3,1,101,1","registered,92,1,107,1,109,1,110,1,111,1,113,1,118,1","registration,25,1","regulated,84,1,81,1,82,1,83,1,85,1,86,1,114,1,124,1","regulations,35,1,36,1,37,1","regulatory,9,1,92,1","rehoming,68,1,69,1","re-homing,107,1,109,1,110,1,111,1,113,1","reinforced,10,3,47,1,30,1,31,1,41,1,43,1","rejection,94,3,92,3,124,4","rejects,50,1","related,1,5,23,4,79,4,107,1,109,1,111,1","relative,94,3,101,1,102,1,103,1,104,1,106,1,107,2,105,1,109,1,110,2,111,1,113,2,119,1","relay,9,4,94,25,92,4,99,3,103,1,114,1,124,3","relays,9,6,94,12,92,3,98,3,99,4,114,2,124,12","release,1,8,6,15,16,1,39,26,47,32,56,10,26,31,27,31,29,31,30,31,31,31,32,32,33,31,34,32,35,32,36,32,37,32,38,30,40,26,41,27,42,27,43,26,44,27,45,30,46,31,48,32,49,25,50,32,51,10,52,10,53,9,54,10,55,10,57,9,58,5,59,5,61,11,64,1,93,6,104,1,112,2,119,9","releases,1,6,6,18,39,4,47,4,23,4,24,1,26,5,27,3,29,3,30,3,31,5,32,5,33,5,34,3,35,3,36,5,37,5,38,6,40,4,41,5,42,4,43,4,44,4,45,4,46,4,48,5,49,5,50,5,58,1,79,4,80,1","releasing,119,3","relevant,94,1","reliability,7,1,8,1,9,1,12,1,13,1,66,1,68,1,69,1,90,1,101,1,108,1,109,1,118,1","reliable,7,1,15,1,17,1,20,1,60,1,62,1,63,1,64,1,65,1,67,1,93,1,97,1,107,1,109,1,119,1,122,1","relief,17,2,74,3,103,1,105,2","remain,94,2,105,1,117,1","remainder,12,2","remaining,60,3,102,3","remains,59,1,107,2,109,2,110,1,111,1,113,1,114,2","remedy,94,1","remote,66,2,108,2","removable,121,1","removal,20,1,51,1,55,1,88,2,114,2,115,2","remove,94,5,52,1,54,1","removed,94,2,59,1","remover,51,1,53,1","removing,20,1,60,1,62,1,63,1,64,1,65,1,67,1","rep,23,3,24,1,61,1,80,1","repair,7,1,94,2,79,3","repaired,79,1","repairing,94,1","repeat,94,1","repeatability,66,1,72,1,94,1,60,1,62,1,63,1,64,1,65,1,67,1,70,2,68,1,69,1,71,1,101,2,102,2,103,2,104,2,106,2,107,3,105,2,108,1,109,3,110,3,111,3,113,3","repeatable,7,5,72,4,60,4,62,4,63,4,64,4,65,4,67,4,70,4,68,5,69,5,71,4,73,4,74,4,75,4,76,4,77,4,78,4,93,1,119,1","repeated,7,1,94,2","repeatedly,94,4","replace,94,1,79,1,93,1,108,1,113,1,119,1","replaceable,95,1,121,1","replaced,60,1,62,1,63,1,64,1,65,1,67,1,75,2","replacement,7,2,66,2,94,2,68,1,69,1,79,1,108,4","replacement.all,79,1","replacements,7,2,66,3,75,1,79,1,108,3","replaces,107,1,109,1,111,1","replacing,94,1,108,1","report,94,1","reported,94,1","re-positioned,102,1","represent,27,1,29,1,30,1,34,1,35,1,67,1,106,1","representative,94,2,100,1,118,2,119,1","representatives,23,1","reproduced,94,1","reproduction,26,1,27,1,29,1,33,1","reprogrammed,102,4","reps,23,1","republic,25,18","req,77,2","request,1,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,2,17,1,39,2,47,2,56,2,66,1,72,1,94,1,18,1,19,1,20,1,21,1,22,1,23,1,24,5,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,2,50,2,51,2,52,2,53,2,54,2,55,2,57,2,58,2,59,2,60,1,61,7,62,1,63,1,64,1,65,1,67,1,70,1,68,1,69,1,71,1,73,1,84,1,74,1,75,1,76,1,77,1,78,1,79,1,80,5,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,96,1,97,1,99,1,104,1,119,2,125,1","requested,24,1,61,1,80,1,112,1","requests,94,1","require,68,1,69,1,88,1,107,1,109,1,114,1,115,1","required,13,1,66,1,94,6,20,1,24,1,25,1,61,1,74,1,80,1,93,1,102,2,103,1,104,2,107,2,108,3,109,3,110,1,113,2,114,2,117,1,118,2,119,2","required--reduces,92,1","required-we,87,1","requirement,119,1","requirements,9,1,94,2,92,1,93,1,101,1,97,1,103,1,104,1,105,1,118,1,119,2,122,1","requires,72,1,103,1,107,3,109,2,111,4,113,2,119,1,123,1","requiring,107,1","res,121,4,123,4","resale,94,1","reseller,94,1","reserved,94,1,92,2,107,1,109,1,110,1,111,1,113,1,118,1","reserves,79,1,121,1,123,1","reset,94,6,118,1","resets,93,1,119,1","residue,51,1,53,1","residues,53,1","resin,6,1,30,1,31,1,38,2,51,1,53,7,61,1","resins,39,1,47,1,26,1,27,1,30,1,31,1,40,1,43,2,46,1","resist,93,1,119,1","resistance,66,1,94,7,70,1,68,1,69,1,76,2,86,1,91,1,101,1,102,1,99,1,100,2,103,1,104,1,107,2,108,2,109,2,110,1,111,2,114,6,118,3,124,1","resistance-capacitance,94,1","resistant,12,2,53,1,70,1,84,2,81,2,82,2,83,2,85,2,86,7,90,1,111,2,114,6,118,1","resistive,94,3,89,1,92,2,117,2,118,1,119,3","resistor,94,4,95,1,98,1,96,1,121,1,123,1,124,1","resistor.resistor,92,1","resistors,114,2,117,1","resolution,1,1,7,3,12,3,13,3,16,1,66,1,94,1,60,3,62,3,63,3,64,3,65,3,67,2,70,1,68,3,69,3,84,1,81,1,82,1,83,1,85,1,86,1,101,4,102,3,103,4,104,3,106,2,107,1,105,3,108,3,109,1,110,1,111,1,113,1,114,1,124,6","resolution.,12,4,13,4","resolutions,108,1","resolve,66,1,108,1","resonance,107,1,109,1,111,1","respect,94,2","respective,94,2,92,1,107,1,109,1,110,1,111,1,113,1","respectively,94,3","responding,87,1","response,15,2,16,1,84,2,81,2,82,2,83,2,85,2,86,2,91,2,114,3,119,1,124,1","responsibility,27,1,29,1,30,1,34,1,35,1","responsible,94,1","responsiblity,26,1,31,1,32,1,33,1,36,1,37,1,38,1","rest,60,15,102,15","restocking,79,3","restoring,89,1","restraining,84,1,81,1,82,1,83,1,85,1,86,1,114,2","restricted,70,1,107,1,109,1,110,1,111,1","restricts,114,1","result,7,2,94,1,68,1,69,1,104,1,107,1,111,1,114,3,118,1","resulting,94,2,89,1,107,2,109,2,110,2,111,2,113,2","results,10,1,94,1,87,1,117,1","resume,94,1","retained,73,1,75,4","retaining,111,2","retains,79,1","retractable,109,1","retracted,109,1","retrieval,94,1","retrieved,107,1,109,1,111,1,113,1","retrofit,94,3,73,1,74,1,92,2,108,4","retrofits,66,2,108,3","retrofitting,66,1,74,2,108,1","return,94,9,24,1,61,1,79,4,80,1,102,2,107,4,108,2,109,4,111,4","returned,94,1,79,3","returns,94,3,79,4","reunion,25,2","rev,102,1,107,5,109,5,111,5,124,5","reverse,13,1,94,2,70,1,100,1,107,2,105,1,108,5,109,2,111,2,118,1,124,1","reverse-acting,60,1,63,1,101,1,102,1","revert,94,2","review,94,2","revised,1,1","revision,94,2,107,12,109,10,110,1,111,10,113,1","revolution,94,1","rf,60,8,62,6,63,7,64,6,65,6,67,4,101,2,102,2,103,2,104,2,106,1,105,2,108,1","rf-series,7,6","rg,74,1","rh,7,6,94,1,60,9,62,9,63,9,64,9,65,9,67,8,77,1,101,13,102,12,97,1,103,12,104,12,106,9,105,9,121,1,122,1,123,1,124,2","ribbon,21,1","rica,25,2","rico,25,2","right,94,8,79,2,90,1,93,2,121,1,123,1","rights,94,1,92,2,107,1,109,1,110,1,111,1,113,1,118,1","rigid,94,1,95,2,96,4,97,3,121,2,123,8","rim,39,1,40,1","ring,66,1,94,5,22,9,75,8,77,2,101,2,102,2,103,1,104,1,106,2,105,6,108,1,111,10","ripple,70,1,107,1,108,1,109,1,110,1,111,1","rise,84,1,81,1,82,1,83,1,85,1,86,1,87,1,89,1,90,1,93,1,114,7,117,1,118,2,119,5","rising,114,1","risk,15,1","risks,7,1","riverside,23,1","rj,123,1","rj45,106,2","rk,97,1,121,1,122,1,123,1","rl,70,1,68,1,69,1,107,2,109,2,110,1,111,2","rly,94,2","rm,97,1,121,1,122,1,123,1","ro,95,1,96,1,97,1,108,1,121,1,122,1,123,1","road,94,3,92,1,121,2,122,2,123,2,124,2","robust,66,1,101,1,107,2,108,1,109,1","rod,7,10,66,5,60,4,62,4,63,4,64,4,65,4,67,5,70,10,69,9,73,3,77,3,91,1,101,4,102,3,103,4,104,3,106,4,105,5,108,3,109,19,111,20","rod-and,109,1","rod-and-cylinder,109,5","rods,111,1","rod-style,60,1,62,1,63,1,64,1,65,1,67,1,77,1,101,7,102,6,103,6,104,6,106,4,105,2,108,6,111,5","rohs,13,1,16,1","roll,14,7,18,1,21,10","rollbag,1,4","rolled,119,1","rolling,72,1,71,1,110,1,113,1","rolls,14,2,18,2","romania,25,2","room,59,1,114,2","rotate,94,2","rotates,9,1","rotating,10,1","rotation,94,4,92,4,107,3","rotations,92,1","roughly,94,1","round,10,1,21,2","routed,94,1","routines,66,1,108,1","rp,7,6,60,6,62,6,63,6,64,6,65,6,67,6,77,4,101,10,102,11,103,8,104,9,106,7,105,7","rr,123,1","rs,123,1,124,1","rs-422,66,1,70,1,68,1,69,2,101,1,107,3,108,10,109,3,111,3,113,1","rs-485,9,1,66,1,94,4,92,3,105,1,108,6,113,1","r-series,7,1,60,8,62,8,63,8,64,8,65,8,67,9,74,6,76,1,78,13,101,14,102,21,103,10,104,11,106,9,105,10,108,1","rss,95,2,96,2,121,2,123,4","rt,95,1,96,1,97,1,121,1,122,1,123,1","rtd,94,19,92,5,99,1,121,1,123,1,124,2","rtds,94,4,92,1","rtu,94,2,92,1,124,1","rtv,44,1,49,1","rubber,12,2,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,44,2,49,2,50,1,59,1,114,1","rubbers,39,1,47,1,40,1,41,1,43,1,45,1,46,1","rugged,10,5,13,1,66,1,70,1,68,1,69,1,90,5,93,1,95,1,101,1,102,1,96,1,103,1,104,1,106,1,107,1,105,1,108,1,109,1,111,1,114,1,118,1,119,1,121,1,123,1","ruggedness,68,1,69,1","run,94,7,92,1","running,94,1,102,1","runs,62,1,64,1,104,1","rupture,1,1,11,5,17,21,95,1,96,1,97,1,125,5","rush,93,1,119,2","russia,25,2","rust,1,1,6,5,10,1,57,1,59,20,61,2","rust-free,10,1","rust-proof,10,1","rustraktm,92,3","rv,95,1,96,1,97,1,121,1,122,1,123,1","rwanda,25,2","rx,95,1,96,1,97,1,106,1,108,4,121,1,122,1,123,1","rx.xx,94,1","rxd,105,3","rxxd,105,1","rz,95,1,96,1,97,1,121,1,122,1,123,1","s.f.34,114,1","s.r,91,1","s.s,114,10","s2410,119,1","s492,119,1","safe,32,1,34,1,35,1,36,1","safety,6,1,9,1,39,1,47,1,56,1,94,2,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,68,1,69,1,92,2,101,1","sahara,25,2","said,79,1","sales,24,1,61,1,80,1,118,2","sales@gp50.com,121,2,122,2,123,2,124,2","sales@westcoastplastics.com,1,1,2,1,3,1,5,1,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,39,1,47,1,56,1,66,1,72,1,18,1,19,1,20,1,21,1,22,1,23,1,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,67,1,70,1,68,1,69,1,71,1,73,1,84,1,74,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,96,1,97,1,99,1,125,1","salvador,25,2","same,15,1,39,1,66,1,94,3,23,1,25,1,26,1,31,1,32,1,33,1,36,1,37,1,38,1,75,1,83,1,95,1,101,4,102,5,96,1,100,1,103,4,104,4,106,3,108,6,114,3,117,1","samoa,25,4","sample,6,3,16,1,39,1,47,1,56,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,61,5,118,1","samples,118,2","san,23,2,25,2","sand,20,1","sandwich,25,2","sanitary,11,1","santa,23,1","sao,25,2","satellite,92,1","satisfied,82,1,114,1","saudi,25,2","save,9,1,79,1","saved,9,1","saves,92,2","saving,66,1,107,1,108,1,109,1,111,1,113,1","say,39,1,47,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1","sb,121,1,123,1","scale,60,1,62,2,63,3,64,2,65,2,67,3,101,1,103,2,104,2,106,2,105,2,110,2,113,2,121,1,123,2","scaled,94,1,92,1","scaling,94,2,124,3","scan,94,7,92,3","scanning,106,1","scent,55,1","scheme,9,1","schools,119,1","schreiber,1,4","schüffel,107,1,109,1,110,1,111,1,113,1","scottsdale,23,1","scrap,7,1","screen,12,1,13,1","screw,91,1,101,1,102,1,103,1,104,1,106,1,107,8,105,1,108,2,109,4,110,1,111,4,113,1,117,11,118,4,121,1","screwdriver,97,4,122,4","screws,94,3,77,1,101,1,102,1,106,1,107,4,105,1,108,2,109,2,110,2,111,1,113,2","scrl,94,1","scroll,94,34","sd,121,1,123,1","sdo,103,2","seal,9,1,66,1,94,3,84,1,81,1,82,1,83,1,85,1,86,1,108,1,114,4,118,2","sealbar,14,4,18,4","sealed,12,1,94,1,70,1,93,2,109,1,111,1,119,2","sealer,1,13,14,4,18,4,21,4","sealers,1,13,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,6,15,1,16,1,17,1,39,1,47,1,56,1,66,1,72,1,18,6,19,1,20,1,21,2,22,1,23,5,24,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,67,1,70,1,68,1,69,1,71,1,73,1,84,1,74,1,75,1,76,1,77,1,78,1,79,5,80,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,96,1,97,1,99,1,125,1","sealing,1,4,66,2,70,1,68,1,69,1,101,2,102,2,103,2,104,2,106,2,105,2,108,2,111,1","seals,101,3,102,3,103,3,104,3,106,3,108,3","search,1,1,2,1,3,1,5,9,6,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,39,1,47,1,56,1,66,1,72,1,18,1,19,1,20,1,21,1,22,1,23,1,25,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,67,1,70,1,68,1,69,1,71,1,73,1,84,1,74,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,96,1,97,1,99,1,125,1","search.php,5,4","sec,67,1,92,3,101,1,104,1","second,15,2,16,1,94,5,60,1,62,1,63,1,64,1,65,1,102,1,100,1,107,2,111,2,119,3,124,3","secondary,94,1,32,1,34,1,37,1","seconds,9,1,16,1,94,9","secret,93,1,119,1","section,94,44,79,1,102,1,105,1,114,5","sections,94,6","sector,27,1,29,1,30,1,34,1,35,1","secure,12,1,94,1,100,1,107,1,111,1,114,1","secured,111,1","security,94,1,79,1","see,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,2,15,1,16,2,17,1,39,2,47,2,56,2,66,2,72,1,94,15,18,2,19,1,20,1,21,1,22,1,23,1,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,2,50,2,51,2,52,2,53,2,54,2,55,2,57,3,58,2,59,2,60,1,62,1,63,1,64,1,65,1,67,1,70,1,68,1,69,1,71,1,73,1,84,1,74,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,2,93,1,95,2,98,1,101,4,102,8,96,2,97,1,99,1,100,2,103,4,104,3,106,2,107,13,105,3,108,22,109,4,111,4,113,2,114,2,117,1,119,1,121,1,123,3,124,1,125,1","seen,94,2,122,2","segment,94,1,92,1","segregation,94,1","selec,94,1","select,9,2,16,1,17,1,39,2,47,2,56,2,66,1,94,6,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,2,50,2,51,2,52,2,53,2,54,2,55,2,57,2,58,2,59,2,60,2,62,2,63,1,64,1,65,4,67,2,93,1,95,1,98,1,96,1,97,1,99,1,103,1,105,1,114,2,117,2,118,2,119,2","selectable,13,2,16,1,65,1,67,1,92,1,103,1,106,1,105,2,124,4","selected,15,1,66,5,94,6,60,2,62,1,63,1,64,1,65,1,67,1,70,1,68,1,69,1,76,1,102,6,107,1,108,5,109,1,118,1,119,1","selecting,94,2,70,1,68,1,69,1,76,1,118,1","selection,17,1,66,1,94,3,60,1,62,1,63,1,64,1,65,1,67,1,95,1,98,1,96,1,97,1,99,1,107,1,111,1","selections,94,3,92,1,102,2,107,4,108,2,111,4","selects,94,1","self-diagnostic,108,1","seller,112,1","sells,79,1","send,66,1,24,2,61,2,80,1","senegal,25,2","senfigure,107,1,111,1","sense,93,2,119,3","sensed,89,1,117,1","senses,68,1,69,1,93,1,119,1","sensing,7,2,66,2,72,2,60,1,62,1,63,1,64,1,65,1,67,2,70,2,68,2,69,2,71,2,84,1,81,1,82,1,83,1,85,1,86,1,91,2,101,2,102,1,103,1,104,1,106,2,107,8,105,1,108,1,109,11,110,9,111,8,113,9,114,1,119,1","sensitive,27,1,29,1,30,1,34,1,35,1,93,1,119,1","sensitivity,26,1,31,1,32,1,33,1,36,1,37,1,38,1,84,1,81,1,82,1,83,1,85,1,86,1,87,1,93,1,114,4,119,1","sensor,7,16,11,6,16,8,17,4,66,13,72,29,94,11,60,18,62,18,63,18,64,17,65,18,67,19,70,14,68,11,69,10,71,22,73,4,74,5,75,4,76,6,77,6,78,5,93,4,95,6,98,4,101,41,102,58,96,6,97,6,99,4,103,44,104,27,106,21,107,70,105,40,108,47,109,63,110,18,111,75,113,42,122,2,123,2","sensor&rsquo,7,1,68,1,69,1","sensor-bus,103,1","sensorintegralconnector,107,1,109,1,111,1","sensors,1,5,7,12,11,4,66,13,72,12,94,1,23,5,24,1,60,10,62,11,63,12,64,13,65,11,67,11,70,9,68,10,69,12,71,12,73,10,74,14,75,4,76,9,77,12,78,6,79,4,80,1,101,19,102,20,103,19,104,16,106,17,107,58,105,7,108,35,109,34,110,15,111,33,113,14","sensors&rsquo,67,1","sensorsinfo@mts.com,107,1,109,1,110,1,111,1,113,1","sensor-specific,104,1","sensorstroke,109,1","sent,94,1,79,1","separate,6,1,94,4,103,1,106,1,105,2","separately,66,1,60,1,62,2,63,1,64,1,65,2,67,3,70,1,68,1,69,1,101,3,102,2,103,3,104,2,106,3,107,4,105,3,108,1,109,1,111,4","separation,94,1,107,1,111,1","separator,20,4","separators,1,1,20,11","sequence,94,5,119,2","serial,66,3,94,3,63,2,70,1,68,1,69,1,92,1,98,2,101,6,102,2,103,1,104,1,107,2,105,1,108,6,109,2,111,2,113,2,124,2","series,6,3,7,4,8,11,11,1,13,3,17,2,39,1,47,1,66,2,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,60,5,62,5,63,5,64,5,65,5,67,4,70,2,68,2,69,2,84,10,74,1,76,1,81,10,82,11,83,10,85,10,86,12,87,11,88,9,89,2,91,9,100,1,114,7,116,3,117,3,118,7,124,2","series20_21_22000.doc,120,4","serpentine,100,2","serve,10,1,94,1","serves,90,1,118,1","service,1,1,23,1,82,1,92,3,103,3,105,2,114,2","serving,1,1","set,72,1,94,12,62,1,71,1,84,5,81,5,82,5,83,5,85,5,86,5,87,4,88,4,89,4,91,7,93,2,95,1,102,2,96,1,103,1,104,1,107,7,109,5,117,3,110,1,111,7,114,7,118,2,119,3,121,1,123,1","setpoint,94,29,78,4,90,1,92,1,102,15,108,9","setpoints,94,2,60,1,102,4,103,1,108,3","sets,7,1,109,2,111,2","setslaveaddress,105,1","setting,12,1,94,12,53,1,84,1,81,1,82,1,83,1,85,1,86,1,87,1,92,1,93,1,102,1,103,1,105,1,117,7,114,9,119,6","settings,13,1,15,1,94,14,87,1,90,1,92,1,93,3,102,4,118,1,119,3","setup,9,1,94,4,78,2,92,1,102,3,103,5,105,3,108,2","seven,94,1,92,1","several,21,1,114,2","severe,10,1,94,1","severely,88,1,91,1,114,1,115,1","seychelles,25,2","sf,114,2,121,1,123,1","shall,94,3,79,3","shallow,9,1,92,1,111,1","share,94,1,64,1","shared,107,1,111,1","sheath,114,2","sheet,9,1,39,1,47,1,56,1,66,1,72,1,94,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,67,1,70,1,68,1,69,1,71,1,92,2,95,1,98,1,96,1,97,1,99,1,103,1,104,1,107,15,105,1,109,13,111,13","sheets,94,1","sheldon,107,1,109,1,110,1,111,1,113,1","shell,84,6,81,6,82,6,83,6,85,6,86,6,87,2,88,2,91,2,93,21,114,31,115,4,119,9","shield,94,4,104,2,107,1,105,2,108,1,109,1,110,3,113,1,121,1,123,1","shielded,94,2,70,1,73,4,106,2,107,5,105,2,109,5,110,1,111,5,113,1","shielding,101,1,105,1","shift,101,1,114,2,121,2,123,2","shift-register,101,1","ship,9,1,39,2,47,2,56,2,66,1,72,1,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,2,50,2,51,2,52,2,53,2,54,2,55,2,57,2,58,2,59,2,60,1,62,1,63,1,64,1,65,1,67,1,70,1,68,1,69,1,71,1,76,1,87,1,88,1,89,1,90,1,93,1,95,4,96,4,97,1,118,2,125,1","shipment,94,2,21,1,79,5","shipped,94,1,79,1,92,2,117,2,112,1","shipping,94,1,25,2,61,1,79,2,112,2","ships,16,1,119,1","shock,12,2,66,1,94,1,93,1,101,3,102,3,103,3,104,3,106,1,107,1,105,1,108,4,109,1,110,1,111,1,113,1,118,1,119,1","shop,57,1","shops,56,1,51,1,52,1,53,1,54,1,55,1,57,1","short,9,1,17,1,94,4,87,1,92,1,103,1,114,3","shorten,88,1,91,1,114,1,115,1","shorter,106,1","shots,59,1","should,94,29,102,1,106,1,107,2,117,3,110,2,111,1,113,2,114,9,118,4,119,5","show,94,19,93,1,108,1","shown,16,1,94,10,60,1,79,1,95,1,101,1,102,1,96,1,100,1,107,6,108,2,109,2,117,1,110,2,111,4,113,1,114,2,119,2","shows,94,8,78,1,119,1","shrink,1,4","shunt,94,2,92,1,121,1","shut,12,1,94,1","shut-off,13,1,16,1","sic,112,1","side,94,6,92,1,100,3,107,3,111,3,124,1","side-by-side,100,1","sided,94,1","sides,94,1,109,1","siemens,105,1","sierra,25,2","sig,121,1,123,2","sighting,16,10","signal,66,1,72,2,94,7,60,2,62,1,63,2,64,1,65,1,67,1,70,2,68,2,69,3,92,1,95,2,101,2,96,1,97,1,107,12,105,2,108,8,109,12,110,1,111,12,113,4,121,17,123,14","signal-conditioning,108,1","signals,72,1,94,1,107,5,108,5,109,5,111,5,113,3","signature,112,1","significant,94,1,27,1,29,1,30,1,34,1,35,1,92,1","significantly,7,1","silicone,6,7,39,16,47,2,40,16,41,2,42,1,43,16,44,2,45,1,46,2,48,2,49,1,50,2,61,3,95,1,96,1,97,1,121,1,122,1,123,2","silicone-free,44,1","silicones,50,2","siloxanes,32,1,34,1","silver,90,1,118,1","similar,39,1,47,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,114,1","simple,9,1,66,1,70,1,91,1,92,2,101,1,103,1,107,1,108,1,113,1","simplesensorparameterupload,107,1,109,1,111,1","simplicity,9,1","simplifies,9,1,66,1","simplify,66,1,108,2,109,1","simulator,78,1","simultaneous,60,1,62,1,67,2,103,1,106,2,107,2,111,2,113,1","simultaneously,66,1,103,1,105,1,108,1","since,1,1,7,1,13,1,60,1,107,1,108,1,109,1,111,1,113,1,114,3","sine,100,1","singapore,25,2,92,1","single,16,1,66,1,94,5,60,1,62,2,64,1,65,1,90,3,91,12,92,1,95,1,101,1,102,12,103,8,104,2,106,1,107,2,105,3,108,1,109,1,110,1,111,2,113,1,118,1,121,1,124,1","single-magnet,103,1,107,4,111,4","single-position,102,1,110,1,113,2","single-spot,16,1","site,5,4","sitill,117,1","situations,68,1,69,1","six,23,1,74,2,101,1,103,1,104,1","size,14,1,94,1,18,1,19,1,20,2,68,1,74,1,75,1,89,1,91,2,100,1,103,1,107,2,109,1,117,1,111,4,114,1,118,3","sized,94,1","sizes,14,1,18,1,21,2,100,1","skeleton,91,5","skip,94,1,63,3,101,3","slave,78,1,103,1,104,2,105,3","sleeve,84,2,77,1,81,2,82,2,83,2,85,2,86,2,114,8,118,1","slide,94,1,107,3,110,1,113,1","slidewire,9,1","sliding,66,2,60,2,62,2,63,2,64,2,65,2,67,2,101,1,109,1","slightly,94,1","slim,92,2","slim...trim...simple,92,4","slings,20,1","slip,6,1,42,10,48,1,61,1","slope,124,2","slotted,17,2","slovakia,25,2,92,1","slovenia,25,2","slow,84,2,81,2,82,2,83,2,85,2,86,2,93,1,114,1,119,2","slowly,93,1,114,1,119,1","sludge,20,1","small,66,1,84,2,75,2,81,2,82,2,83,2,85,2,86,2,95,1,98,1,96,1,97,1,99,1,108,1,114,5,122,1,123,1","smart,60,1,62,2,63,1,64,2,65,2,67,1,104,1,107,1,109,1,111,1,113,1","smelling,52,1","smooth,10,1,119,1","smoother,114,1","smoothly,9,1","snap,8,2,27,1,29,1,30,1,34,1,35,1,90,19,91,2,118,7","snap-acting,118,1","snap-action,91,4","snaps,90,1,118,1","snsr,94,4","snugly,94,1","soak,56,1","soft,16,1","software,4,1,94,2,65,1,78,11,101,3,102,2,103,2,104,1,108,1","solar,118,1","sold,94,1","soldered,17,1","sole,94,2","solenoids,94,1","solid,94,1,20,4,68,1,69,1","solid-liquid,20,9","solids,20,2","solomon,25,2","solution,7,1,39,3,20,1,40,2,60,1,62,1,63,1,64,1,65,1,70,1,67,2,91,1,106,1,111,1,114,1,115,1","solutions,11,1","solvent,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2","solventless,26,1,31,1,32,1,33,1,36,1,37,1,38,1","solvent-less,26,1,31,1,32,1,33,1,36,1,37,1,38,1","somalia,25,2","something,94,1","sonic,7,1,107,2,109,2,111,2,113,1","sonic-strain,107,2,109,2,110,1,111,2","sooner,93,1,114,1,119,1","sophisticated,15,1,66,1,26,1,31,1,32,1,33,1,36,1,37,1,38,1,108,1","sor,107,1,111,1","sound,27,1,29,1,30,1,34,1,35,1","source,1,1,94,9,23,1","sources,94,1","south,25,4,92,1","southern,23,1,25,2","space,70,1,84,1,81,1,82,1,83,1,85,1,86,1,87,1,111,3,114,2","spacer,75,1,107,1,111,4","spacing,93,1,119,1,121,1","spacings,119,2","spain,25,2,92,1","span,66,1,94,13,60,1,78,2,91,1,92,5,95,1,98,1,102,5,96,1,108,7,111,1,121,3,123,3,124,1","spans,9,1,94,1","spare,77,1,110,1,113,1","spares,110,1,113,1","spc3,105,1","spdt,94,2,92,1","speaks,9,1","spec,9,1,15,1,72,1,94,1,71,1,92,1,95,1,98,1,96,1,97,1,99,1","special,94,3,21,1,73,1,84,1,79,1,81,1,82,1,83,1,85,1,86,1,91,1,100,1,107,1,108,1,117,2,114,18,115,6,119,1,121,1,123,1","specialized,6,1","specially,7,1,38,1,107,1,109,1,111,1,113,1","specially-designed,110,1","specialty,1,1,6,1","specifcations,114,1","specific,6,5,17,1,39,5,47,5,56,4,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,5,36,5,37,4,38,4,40,5,41,5,42,5,43,5,44,5,45,5,46,5,48,5,49,5,50,5,51,4,52,4,53,4,54,4,55,4,57,4,58,4,59,4,84,1,81,1,82,1,83,1,85,1,86,1,107,3,109,2,111,3,113,1,118,1","specifically,29,1,33,1","specification,66,1,60,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,105,2,108,2,110,4,113,4","specifications,12,1,13,1,15,1,16,1,66,1,94,6,60,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,84,1,81,1,82,1,83,1,85,1,86,1,87,1,88,2,91,1,92,2,93,1,101,2,102,2,103,2,104,2,106,2,107,6,108,2,109,6,117,4,110,2,111,6,113,2,114,2,118,3,119,4,121,3,123,3,124,2","specifics,6,1","specified,15,1,79,1,92,1,107,1,117,2,111,1,114,9","specify,117,3,114,3,118,4,121,1,123,1","specifying,107,2,111,2,114,1","specs,9,1,121,1,123,1,124,1","spectrum,6,3,39,1,47,11,40,1,41,1,42,1,43,1,44,1,45,2,46,1,48,1,49,1,50,1,61,1","speed,7,1,72,1,94,2,60,23,62,1,63,2,64,1,65,3,67,3,101,4,102,32,103,11,104,1,106,4,107,5,105,8,109,5,110,3,111,5,113,5,124,1","speeds,9,1","spherical,75,1,111,1","spike,66,1,101,1,102,1,103,3,104,3,106,3,105,3,108,3","spin,20,1","spot,16,2,87,1","spray,6,10,10,1,39,8,47,4,56,4,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,8,38,4,40,8,41,4,42,4,43,8,44,4,45,8,46,4,48,8,49,4,50,4,51,4,52,4,53,4,54,4,55,4,57,4,58,4,59,19,61,2,119,1","sprays,6,1","spring,117,4","sprinkler,10,2,119,1","spst,118,1","square,14,4,66,1,108,3","sr,121,2,123,2","sri,25,2","ssi,7,2,63,10,74,1,78,1,101,18","sst,110,1,111,2,113,1","st,25,10,93,29","st-10,10,5","st-100,10,1","st-125,10,1","st-15,10,1","st-150,10,1","st-175,10,1","st-20,10,1","st-200,10,1","st-25,10,5","st-30,10,1","st-40,10,1","st-5,10,1","st-50,10,1","st-60,10,1","st-70,10,1","st-8,10,1","st-80,10,1","stable,26,1,27,1,29,1,30,1,31,1,33,1,38,1","stafford,100,1","stage,7,1","stainless,15,2,17,2,66,1,70,1,69,1,86,1,87,1,88,1,89,2,93,2,95,1,101,1,102,1,96,1,103,1,104,1,106,1,105,1,108,1,117,2,111,5,114,8,115,4,118,1,119,9,121,2,123,3","stainless-steel,70,1,111,1","stamp,117,1,114,1","stamped,110,1,113,1,114,1","stamping,47,1","stand,10,1,11,1","stand-alone,82,1","standard,5,4,8,1,9,7,13,1,17,3,66,6,72,1,94,8,19,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,60,4,62,6,63,6,64,6,65,4,67,4,68,1,69,2,71,1,73,1,75,2,76,4,77,3,79,1,81,2,82,1,83,1,85,1,86,2,92,7,93,1,95,2,101,12,102,9,96,4,97,3,100,3,103,12,104,10,106,6,107,18,105,6,108,11,109,13,110,3,111,20,113,3,114,9,119,2,121,6,122,1,123,8,124,1","standard10mmdia.sensorrodfortypicalapplications,111,1","standard90,92,1","standardly,114,1","standards,13,3,72,1,94,2,26,1,31,1,32,1,33,1,36,1,37,1,38,1,70,1,71,1,84,1,81,1,82,1,83,1,85,1,86,1,107,1,109,1,117,1,110,1,111,1,113,1,114,2","start,7,1,66,5,72,18,70,7,68,5,69,6,101,1,102,3,107,45,108,27,109,34,111,48,113,17","started,97,4,122,4","starter,97,2,122,2","starts,93,1,119,1","start-up,58,1,59,1,107,1,109,1,111,1,113,1","state,94,1,24,1,25,4,61,1,80,1,117,1,112,8,114,2","stated,79,1,112,2,121,1,123,1","statement,94,2,112,1","states,25,4,110,1,113,1","static,66,1,102,2,103,2,104,2,106,2,105,2,108,2,111,4,123,1","statistics,119,1","status,94,4,62,1,70,1,68,1,69,1,92,2,101,3,102,1,103,3,104,5,106,2,107,2,105,5,109,2,111,1,113,2","stay,7,1","stc09131-6,74,1","stc09131-7,74,1","stc09131d,74,1","stc09131d06pg9,74,1","stc09131h06pg9,74,1","std,95,1,121,4,123,6","steady,117,1,114,2,119,1","steel,15,2,17,2,66,1,22,1,27,1,29,1,30,1,34,1,35,1,70,1,69,1,86,1,87,1,88,1,89,2,93,39,95,1,101,1,102,1,96,1,103,1,104,1,106,1,105,1,108,1,117,2,111,6,114,8,115,4,118,2,119,10,121,2,123,3","stem,15,2,95,2,96,5,97,4,121,4,123,8","stemfor,123,1","step,94,1,118,1","stepper,94,1,92,1","steps,94,2,103,1,105,1","stock,10,1,12,1,13,1,15,1,17,2,19,1,20,1,21,1,22,1,73,1,84,1,74,1,75,1,77,1,78,1,79,2,81,1,82,1,83,1,85,1,86,1,90,1,91,1,98,1,99,1,117,1,119,1","stocked,93,3,114,2,119,1","stocks,22,1","stop,7,2,66,5,72,19,70,7,68,5,69,6,107,39,108,27,109,31,117,3,111,41,113,17,124,1","stopoutput,107,3,109,3,111,2","stopoutputs,107,1,109,7,111,1","stops,111,1","storage,13,1,94,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,92,1,124,2","stored,13,1,15,1,94,2","stores,12,1,13,1","stow,13,1","straddles,94,1","straight,46,1,73,4,74,5,76,4,77,1,100,1,107,8,105,1,109,8,110,1,111,8,113,3","straight-exit,101,1,102,1,103,1,104,1,108,1,113,1","straightforward,9,1","straightforwardness,9,1","strain,7,2,11,1,74,3,95,2,96,2,97,2,103,1,107,3,105,2,109,3,110,2,111,3,113,3,121,2,122,2,123,4","strain-pulse,107,1,109,1,111,1","strand,100,2","strands,100,1","stray,114,1,115,1","street,117,1,114,1,118,1,119,1","strength,117,1,118,1","stress,7,1,100,1","stripping,114,1","stroke,66,13,72,20,60,16,62,9,63,9,64,9,65,9,70,12,67,9,68,12,69,15,71,18,101,19,102,33,103,21,104,18,106,20,107,64,105,21,108,27,109,26,110,10,111,38,113,11","stroke-dependent,101,1,102,1,106,1,108,1","stroke-length,106,1","strokes,70,1,111,1","strong,54,1","strongly,94,1","strut,84,4,81,4,82,4,83,4,85,4,86,4,114,7","strut-and-tube,84,1,81,1,82,1,83,1,85,1,86,1,114,1","struts,93,4,114,3,119,4","stubborn,56,1,55,1","stud,22,4,73,1,75,1,77,1,109,1,118,1","sturdy,10,1","style,7,3,8,6,15,2,66,12,72,1,19,2,60,10,62,10,63,11,64,10,65,10,70,3,67,12,68,1,71,1,73,3,84,5,74,1,75,3,77,3,81,5,82,5,83,5,85,5,86,4,88,4,91,6,95,2,101,11,102,11,96,2,97,1,100,2,103,9,104,9,106,9,107,20,105,12,108,11,109,2,110,4,111,1,113,4","stylerotation,107,1","styles,21,1,107,1,111,1","stylev,107,1","subject,94,2,79,5,88,1,92,1,107,1,109,1,117,2,110,1,111,1,113,1,114,3,115,1,118,2,119,3","subjected,94,1","submit,9,1,17,1,66,1,60,1,61,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,76,1,79,1,95,1,98,1,96,1,97,1,99,1","subsequent,94,2","subsidiary,112,1","substances,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,50,1","substantially,84,1,81,1,82,1,83,1,85,1,86,1,114,1","success,72,1,70,1,71,1,107,1,109,1,110,1,111,1,113,1","successfully,11,1,95,1,96,1,97,1,122,1,123,1","sudan,25,2","sufficient,39,1,47,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1","sufficiently,117,1,114,1,118,1,119,1","suffix,9,1,94,1,92,1","suggested,27,1,29,1,30,1,34,1,35,1,119,2","suggestions,91,1,117,1,114,1,115,1,119,1","suitability,94,1","suitable,59,1,70,2,68,1,69,1,111,2,119,3","suited,104,1,114,1","sulfide,118,1","summerizes,94,1","super,6,1,52,2,61,1","superior,10,1,101,1,103,1,104,1,106,1,105,1","supervision,119,1","supplement,119,2","supplied,94,1,62,1,79,1,103,2,104,1,107,3,105,1,109,2,111,3,114,1,118,2","supplier,91,1,114,1,115,1","supplies,1,4,7,1,94,1,23,4,77,1,79,4,118,1","supply,9,3,10,1,66,1,94,9,77,2,78,4,92,5,98,1,101,3,102,2,103,4,104,1,106,2,105,6,108,10,113,1,124,2","supplying,1,1,23,1","support,94,2,26,1,31,1,32,1,33,1,36,1,37,1,38,1,92,3,101,1,102,1,103,2,104,1,106,1,107,5,105,2,108,1,110,2,113,2","supported,100,1,106,1,109,1","supports,103,1,107,1,109,1,111,1","suppress,94,1","suppression,94,3,119,1","suppressors,94,2","surcharge,79,1","sure,94,2","surface,8,1,10,2,12,2,13,3,16,2,94,5,26,1,27,1,54,1,88,2,89,16,93,4,100,1,107,2,117,5,110,2,113,2,114,1,115,1,118,5,119,2,121,1","surface-mount,89,3","surfaces,19,1,35,1,36,1,59,1,100,2","surge,94,2","suriname,25,2","surrounding,88,1,93,2,114,2,115,1,119,2","surrounds,91,1","survivability,66,1,101,1,102,1,103,1,104,1,106,1,105,1,108,1","susceptability,94,1","susceptibility,107,1,109,1,111,1","suspect,88,1,91,1,117,1,114,1,115,1,119,1","svalbard,25,2","swaziland,25,2","sweden,25,2","sweep,94,1","swinging,109,1","switch,9,1,90,2,91,21,92,1,94,15,114,2,118,3","switches,12,1,94,1","switzerland,25,2","sync,103,1","synchronization,63,1,101,1,103,1","synchronized,63,2,101,3","synchronous,63,3,101,7,103,1,105,1","synergistic,35,1,36,1","synthetic,39,1,40,1,50,1","syria,25,2","system,8,1,17,1,66,1,72,1,46,1,60,1,62,4,63,2,64,4,65,2,67,1,71,1,93,1,95,1,94,2,98,1,101,2,96,1,97,1,99,1,103,4,104,3,107,1,105,2,109,1,110,1,111,1,113,2,114,1,115,1,119,4","systems,20,1,30,1,31,1,67,1,91,1,93,4,95,1,96,1,104,2,106,1,107,3,109,3,110,3,111,3,113,3,119,4,121,1,123,1","systems.,93,4","sz,121,1,123,1","t1,118,1","t10­leads,118,1","t11­leads,118,1","t12­leads,118,1","t13­leads,118,1","t14­vertical,118,1","t1­eyelet,118,1","t2­eyelet,118,1","t3­eyelet,118,1","t4­eyelet,118,1","t6­1,118,1","t7­1,118,1","table,9,1,17,1,66,1,60,1,62,1,63,1,64,1,65,1,67,1,95,1,94,4,98,1,96,1,97,1,99,1,107,4,108,3,109,4,117,1,111,4,118,5","tag,117,1,114,1,118,1,119,1","tailored,6,1","taiwan,25,2","tajikistan,25,2","take,10,1,12,1,13,1,15,1,19,1,20,1,73,1,84,1,74,1,75,1,77,1,78,1,81,1,82,1,83,1,85,1,86,1,90,1,91,1,94,3","taken,101,1,102,1,103,1,108,1,119,1","tamper,84,1,81,1,82,1,83,1,85,1,86,1","tampering,114,3","tamper-proof,84,1,81,1,82,1,83,1,85,1,86,1,114,4,118,2","tanzania,25,2","tape,1,2,14,13,18,46,19,18,100,8","tapes,19,2,100,9","tapped,114,1","tare,99,1,124,1","task,100,1,107,1,109,1,111,1,113,1","tb1,94,13","tb10,94,3","tb2,94,11","tb3,94,11","tb4,94,6","tb5,94,1","tb5-tb8,94,1","tb6,94,1","tb7,94,1","tb8,94,1","tc,92,1,94,4","tce,94,2","t-connector,105,1","tcs,92,1,94,1","te,111,1","technaseal,1,4","technical,23,1,92,3","technologie,107,1,109,1,110,1,111,1,113,1","technology,7,6,13,1,15,1,66,2,72,5,60,4,62,5,63,5,64,5,65,5,70,5,67,6,68,6,69,6,71,5,73,4,74,4,75,4,76,4,77,4,78,4,92,1,101,1,102,1,103,1,104,2,106,4,107,3,105,1,108,2,109,3,110,3,111,3,113,3,118,1","technology&#132,70,1","teflon,1,2,14,34,18,51,119,1","teflon-adhesive.php,18,4","teflon-cloth.php,14,4","tel,92,2,107,3,109,3,117,1,110,3,111,3,112,1,113,3,114,1,118,1,119,1,121,2,122,2,123,2,124,2","telephone,112,2","temp,1,1,22,4,84,2,81,2,82,2,83,2,85,2,86,2,87,1,89,2,90,3,91,1,92,2,93,3,114,5","temperature,1,6,8,15,9,4,11,2,12,5,13,6,15,8,16,7,17,1,39,1,47,1,56,1,66,1,19,6,21,8,22,15,23,2,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,2,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,84,30,81,29,82,30,83,29,85,29,86,29,87,23,88,13,89,25,90,10,91,26,92,2,93,8,95,5,94,11,98,1,101,2,102,1,96,1,97,7,99,1,100,9,103,2,104,2,106,3,107,4,105,2,108,2,109,1,117,19,110,1,111,5,113,1,114,44,115,3,118,7,119,24,121,5,122,6,123,4,124,4","temperatures,13,1,16,2,38,1,82,1,88,1,94,1,114,2,115,1,118,1","tempered,21,1","tempo,7,2,66,3,74,1,108,1","temposonics,1,13,7,30,66,16,72,15,23,4,24,1,60,26,62,27,63,28,64,27,65,27,70,16,67,27,68,19,69,20,71,15,73,13,74,15,75,13,76,15,77,13,78,13,79,4,80,1,103,3,104,1,106,1,107,6,105,3,108,12,109,5,110,8,111,8,113,8","temposonics&reg,70,1","temposonics®,101,6,102,6,103,6,104,4,106,6,107,10,108,8,109,8,110,1,111,9,113,1","tempswitch,8,4,87,4,89,4,90,4","ten,10,1","tends,114,1","tension,84,1,81,1,82,1,83,1,85,1,86,1,114,2","tenth,12,4,13,6","tenths,66,2,60,2,62,2,63,2,64,2,65,2,70,2,67,2,68,2,69,2,101,1,102,1,103,1,104,1,106,1,107,1,105,1,108,1,109,1","term,10,1,58,1","terminal,84,3,81,1,82,1,83,1,85,1,86,1,94,17,114,1","terminals,22,10,59,1,90,5,94,7,107,4,109,4,111,4,118,4","terminate,94,1","termination,62,1,63,3,76,1,101,3,102,2,103,1,107,4,105,4,108,2,109,4,111,4","terminations,118,1","terminator,105,2","terms,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,39,1,47,1,56,1,66,1,72,1,18,1,19,1,20,1,21,1,22,1,23,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,71,1,73,1,84,1,74,1,75,1,76,1,77,1,78,1,79,4,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,98,1,96,1,97,1,99,1,112,1,125,1","terms-conditions.php,79,4","terr,94,2","territories,25,2","territory,24,1,25,2","test,1,1,9,1,11,1,15,20,66,1,92,3,94,34,98,2,101,1,102,1,103,2,104,1,106,1,107,1,105,1,108,1,109,1,110,2,111,1,113,2,114,1,118,2,119,1,124,2","testable,93,1,119,1","tested,118,1","tested...quality,117,1","testing,92,1,118,1","tests,94,1,118,1","texas,100,1","text,5,1,114,1","textile,114,1","tfe,118,1","tggt,22,2,118,1,119,1","tggt-08,22,1","tggt-10,22,1","tggt-12,22,1","tggt-14,22,1","tggt-16,22,1","tggt-18,22,1","th,75,2","thailand,25,2","than±0.05,94,1","thd,121,1,123,2","thebase,82,1","themselves,94,2","theno,107,1","thepartlow-west,94,2","there&rsquo,9,1","thereby,88,1,114,1,115,1","therefore,84,1,81,1,82,1,83,1,85,1,86,1,107,2,108,1,109,1,111,2,114,1,119,1","thereof,94,1","thermal,23,1,90,1,93,1,100,1,118,1,119,2,121,2,123,2","thermistor,15,1","thermo,88,1","thermocouple,1,4,11,4,12,19,13,27,15,1,16,9,17,1,92,2,95,8,94,12,96,4,97,7,99,1,121,5,122,1,124,2","thermocouple.,16,4","thermocouples,1,1,12,1,16,1,39,1,47,1,56,1,23,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,94,1","thermoformed,47,1,43,1","thermometer,1,1,12,15,15,7,16,18,94,3","thermometers,1,1,15,12","thermoplastic,46,1","thermoplastics,39,1,47,1,40,1,41,1,42,1,43,1,44,2,45,2,46,1,48,1,49,1,50,1","thermoset,6,1,41,10,42,1,46,1,50,1,53,1,61,1","thermosets,39,1,47,1,40,1,41,1,42,1,43,1,44,2,45,2,46,1,48,1,49,1,50,1,51,1","thermostat,8,5,84,6,81,6,82,6,83,6,85,6,86,6,87,10,88,4,89,21,90,13,91,4,93,4,114,3,118,5","thermostats,1,1,8,2,84,4,81,4,82,4,83,4,85,4,86,4,88,4,89,1,90,12,91,4,118,4,119,1","thermoswitch,1,4,8,19,84,22,81,25,82,27,83,22,85,22,86,28,87,21,88,22,89,10,90,4,91,17,93,4,114,6,115,1","thermoswitch®,117,4,114,30,115,7","thermoswitches,1,5,8,1,82,1,86,1","thermoucouple,94,1","thermowell,8,1,88,7,94,1","thermowells,88,6,114,1,115,1","thicker,11,1,95,1,96,1,97,1,122,1,123,1","thickness,107,2,111,5","thin,47,1,48,1","thing,15,1","third,94,1,119,3","third-party,104,1","thirty,79,1","thorough,10,1","those,6,1,94,1,101,1,114,1,118,1","thoseclassified,119,1","though,60,1,62,1,63,1,64,1,65,1,67,1","thousands,11,1,93,1,95,1,94,2,96,1,97,1,119,1,122,1,123,1","thread,69,3,84,1,81,2,87,2,95,1,96,1,107,6,109,2,114,2,121,4,123,6","threaded,17,1,66,1,75,1,101,1,102,1,103,1,104,1,106,1,105,1,108,1,109,1,111,3","threads,66,3,60,3,62,3,63,3,64,3,65,3,67,5,73,2,81,1,82,1,83,1,85,1,86,2,87,1,101,10,102,10,103,10,104,10,106,10,105,10,108,7,109,2,111,1,114,2,121,2,123,1","three,19,1,60,1,94,3,100,1,103,1,105,1,109,2,119,2","three-button,9,1","through,7,1,10,1,17,1,19,1,23,1,68,1,79,2,87,1,91,1,92,1,95,1,94,3,96,1,100,1,103,1,110,2,111,2,113,1,121,1,123,3","throughout,8,1,86,1,107,1,110,1,113,1,121,1,123,1","throw,90,1","thru,114,3","thumbscrews,94,1","thus,62,1,64,1,88,1,104,1,114,1,115,1","tie,100,1","tight,87,1,100,1","tighten,94,1","tilt,92,2,94,2","time,7,3,15,2,16,1,56,1,66,2,72,2,26,2,31,2,32,2,33,2,36,2,37,2,38,2,57,1,60,1,62,2,63,2,64,2,65,1,67,1,79,7,92,3,95,4,94,11,101,1,102,2,96,4,97,4,103,3,104,2,106,1,107,7,105,1,108,3,109,7,117,1,110,2,111,7,113,7,114,3,115,1,119,1","time-based,107,2,109,2,110,1,111,2,113,1","times,26,1,31,1,32,1,33,1,36,1,37,1,38,1,60,1,62,1,63,4,64,1,65,1,67,1,101,3,109,1,117,1,114,3,119,1,121,1,123,1","timing,101,1,104,1","timor,25,2","tin,49,1,114,3","ting,107,1,109,2,111,1","tip,11,1,12,2,13,3,15,2,16,1,60,15,92,1,95,1,94,2,102,15,96,1,97,1,122,1,123,1","tire,72,1,71,1,110,1,113,1","tireless,57,1","titan,1,4","titanium,121,1,123,2","title,5,1,79,1,112,4","tmperatures,91,1","tobago,25,2","today,15,1","together,93,1,104,1,119,1","toggle,94,2","togo,25,2","tokelau,25,2","tokyo,107,1,109,1,110,1,111,1,113,1","tolerance,17,1,107,2,109,1,117,2,111,1,114,2,119,1","tolerances,118,2","tolerange,87,1","tom,23,1","tom@westcoastplastics.com,23,1","tome,25,2","tonga,25,2","tonnage,10,1","too,114,3","tool,59,1,97,1,104,1,122,1","tooling,56,2,51,2,52,2,53,2,54,1,55,2,57,1,58,1","tools,7,1,78,1","top,7,1,66,1,60,2,62,2,63,2,64,2,65,2,67,2,73,1,75,1,92,1,94,4,101,1,102,2,103,1,104,1,106,1,107,3,105,1,108,1,110,2,111,1,113,2","topologies,106,1","torque,66,1,101,1,102,1,103,1,104,1,106,1,107,1,105,1,108,1,109,1,117,4,110,1,111,1,113,1,121,1,123,1","torsional,7,1","total,72,1,113,1","totally,10,1","touches,94,1","touch-ups,57,1","toughest,109,1","toward,94,5","towards,60,30,102,30","tower,1,4,10,4,20,5","towers,1,1,10,10,20,5","tp,124,2","traceability,13,1","traceable,13,3","trade,112,2","trademark,118,1","trademarks,92,2,107,2,109,2,110,2,111,2,113,2","tradenames,100,1","trades,35,1,36,1","tradition,117,1","traditional,39,1,47,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1","train,63,1","tranducer,95,1,96,1,97,1","transcribed,94,1","transducer,7,4,11,9,17,8,72,5,60,4,62,4,63,4,64,4,65,4,70,5,67,4,68,6,69,5,71,5,73,4,74,4,75,4,76,4,77,4,78,4,95,10,94,3,98,14,96,11,97,16,99,9,121,1,122,11,123,1,124,6","transducers,1,6,7,13,11,13,17,2,66,6,72,4,23,4,24,1,60,11,62,11,63,11,64,11,65,12,70,9,67,11,68,10,69,10,71,4,73,4,74,4,75,4,76,4,77,4,78,4,79,4,80,1,95,13,97,9,98,2,96,13,99,1,121,2,122,4,123,3,124,3","transfer,87,1,101,1,103,3,104,3","transferred,105,1","transformer,94,3","transformers,22,1,94,1","transient,93,1,94,1,119,3","transit,94,1","translated,94,1","transmission,64,1,65,1,67,1,103,1,104,1,106,1,105,3","transmit,62,1","transmits,95,1,97,1,96,1,104,1,122,1,123,1","transmitted,63,1,94,1,101,2,104,1,105,1","transmitter,9,2,92,4,94,10,121,1,122,1,123,1","transmitters,11,6,95,1,94,5,97,1,98,1,96,1,99,1,121,2,122,3,123,3,124,2","trap,20,1","travel,94,2","traveling,72,1,107,1,109,1,111,1,113,1","travels,7,1,107,3,109,2,110,2,111,1,113,2","trays,117,1","tre,94,2","treating,9,1,92,1","trend,9,2,92,1,94,2","triangle,87,1","tried,117,1","trigger,93,3,119,2","triggered,119,1","trim,92,2","trinidad,25,2","triple,58,1","troubleshooting,66,2,94,1,101,1,102,1,103,1,106,1,105,1,108,2","true,94,1","truly,39,1,47,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1","ts,94,1,119,1","t-slot,66,1,101,1,102,1,103,1,104,1,106,1,105,1,108,1","ttl,94,1","tube,66,3,67,4,97,4,101,4,102,4,103,4,104,4,106,4,105,4,108,4,121,1,122,4,123,5","tubing,95,1,97,1,96,1,100,1,121,1,122,1,123,2","tubular,17,1","tune,46,1","tungsten,117,1,114,2","tunisia,25,2","tunnel,72,1,71,1,110,1,113,1","turkey,25,2","turkmenistan,25,2","turks,25,2","turn,94,16,117,1,114,2","turned,94,1","turning,89,1","turns,12,1,89,1","tuvalu,25,2","twice,94,1","twisted,94,2","two,7,1,9,11,58,1,60,2,62,1,63,1,64,1,65,1,70,1,67,2,84,1,81,1,82,1,83,1,85,1,86,1,92,7,94,29,97,3,101,4,102,6,100,5,103,1,104,1,106,1,107,7,105,1,108,1,109,5,110,2,111,6,113,2,114,1,122,3","two-year,58,1","tx,106,1,108,4","txd-n,105,2","txd-p,105,2","txrx,106,1","type,12,11,13,12,16,11,39,5,47,4,56,4,66,3,26,4,27,4,29,4,30,4,31,4,32,4,33,4,34,4,35,4,36,4,37,4,38,4,40,5,41,4,42,4,43,4,44,4,45,4,46,4,48,4,49,4,50,5,51,4,52,4,53,4,54,4,55,4,57,5,58,4,59,4,60,1,62,1,63,1,64,1,65,1,70,1,67,1,69,2,84,1,74,7,75,1,76,2,78,3,81,2,82,1,83,2,85,2,86,2,87,4,91,2,92,3,93,15,95,2,94,19,101,5,102,7,100,1,103,6,104,5,106,5,107,1,105,5,108,4,109,1,110,2,111,2,113,4,114,17,115,1,118,1,119,9,121,3,124,7","type-k,13,4","types,21,1,68,1,76,1,93,1,94,11,102,1,107,7,109,3,111,5,119,1","typical,66,2,60,1,62,1,63,2,64,1,65,2,67,1,92,3,94,5,101,3,102,2,100,1,103,2,104,2,106,2,107,1,105,2,108,3,109,1,117,1,111,2,119,2,124,3","typically,94,1","typographical,79,1","u.l,6,2,47,9,48,9,61,2,118,1","u.s,13,1","u.s.a,100,2,117,1,114,1,118,1,119,1","ua,121,1,123,1","uaro,94,1","uart,78,1","ub,123,1","uc,121,1,123,1","uganda,25,2","uh,121,1,123,1","ukraine,25,2","ul,9,1,39,1,47,2,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,2,49,1,50,1,84,1,81,2,82,2,83,1,85,1,86,2,89,1,90,1,94,4,117,1,114,2,118,1,119,9","ul1092,92,1","ul521,119,1","ul916,92,1","ulc,119,4","ultimate,9,1,100,1","ultra,6,17,26,27,27,26,29,26,30,26,31,27,32,27,33,27,34,26,35,26,36,27,37,27,38,28,61,12","ultrasonic,72,1,110,1,113,2","ultra-thin,26,3,27,3,29,2,30,1,31,1,32,1,33,2,34,1,35,1,36,1,37,1,38,1","unauthorized,9,1","unbroken,59,1","unconnected,102,1,108,1","uncorrected,60,1,62,1,63,1,64,1,65,1","under,10,1,13,1,84,1,79,1,81,1,82,1,83,1,85,1,86,1,94,3,101,1,102,1,117,1,114,6,119,2","undershoot,84,1,81,1,82,1,83,1,85,1,86,1,114,1","underwriters,84,1,81,1,82,1,83,1,85,1,86,1,117,1,114,3,119,2","unf,70,2,77,1,109,3,111,2","unf-2a,121,1,123,3","unf-3a,66,1,101,3,102,3,103,3,104,3,106,3,105,3,108,3,111,3","uniform,46,1","unique,7,4,11,1,13,1,72,5,19,1,60,4,62,4,63,4,64,4,65,4,70,4,67,5,68,5,69,5,71,4,73,4,74,4,75,4,76,4,77,4,78,4,87,1,93,1,95,1,97,1,96,1,100,2,106,1,107,1,109,1,111,1,113,1,119,1,122,1,123,1","unit,9,2,66,2,60,2,62,2,63,2,64,2,65,2,70,2,67,2,68,2,69,2,82,1,83,1,87,1,93,9,94,3,117,6,114,10,119,15","unit&rsquo,9,1","united,25,6,92,1,110,1,113,1","units,7,2,72,1,71,1,73,2,81,1,82,2,83,1,85,1,86,1,87,1,91,1,92,1,93,3,94,7,105,1,117,3,110,1,113,1,114,9,118,1,119,14,124,2,125,1","universal,9,1,39,1,47,1,40,1,92,1,94,1,124,1","universals,6,1","unknown,105,4,110,4,113,4","unless,79,2,92,1,94,4,102,1,107,1,117,2,110,1,112,2,113,1,114,5,119,2","unlike,100,1","unpacking,94,2","unset,114,2","unsurpassed,101,1","until,79,1,94,5","untitled,2,1,3,1,5,1,6,1,7,2,8,2,9,2,10,2,11,2,12,2,13,2,14,2,15,2,16,2,17,2,39,2,47,2,56,2,66,2,72,2,18,2,19,2,20,2,21,2,22,2,23,2,25,4,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,2,50,2,51,2,52,2,53,2,54,2,55,2,57,2,58,2,59,2,60,2,62,2,63,2,64,2,65,2,70,2,67,2,68,2,69,2,71,2,73,2,84,2,74,2,75,2,76,2,77,2,78,2,79,2,81,2,82,2,83,2,85,2,86,2,87,2,88,2,89,2,90,2,91,2,93,2,95,2,97,2,98,2,96,2,99,2,125,3","unused,94,1,102,1,106,1","update,66,1,60,1,62,1,63,1,64,1,65,1,67,5,68,1,101,1,102,2,103,1,104,1,106,5,105,1,108,1,110,1,113,1,124,2","updated,101,1","upgrading,7,2,66,1","upload,70,3,68,2,69,2,107,7,109,7,111,7,113,7","uploads,107,1,109,1,111,1","upon,79,4,94,2,104,1,119,2","upper,91,1,93,2,94,3","ups,39,1,47,1,56,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,79,2","upscale,94,7,124,1","upto-30vdc,107,1,109,1,111,1","urethane,6,2,29,24,33,24,51,1,61,2","urethanes,29,1,33,1","uruguay,25,2","usa,24,1,61,1,80,1,92,2,94,4,107,2,109,2,110,1,111,2,113,1,121,2,122,2,123,2,124,2","use,9,1,14,5,15,1,56,2,66,1,18,5,26,1,27,1,29,1,30,1,31,1,32,2,33,1,34,2,35,2,36,2,37,2,38,1,51,1,52,2,53,1,54,1,55,1,57,2,59,2,74,1,77,9,78,1,88,6,93,1,95,1,94,15,101,1,102,1,103,3,104,1,107,2,105,1,108,4,109,2,110,1,111,6,112,1,113,1,114,8,115,6,118,1,119,3,121,2,123,1,124,2","used,13,1,15,1,17,1,56,1,72,4,19,1,21,1,25,1,35,1,36,1,42,1,51,1,52,1,53,2,54,1,55,1,57,1,62,1,63,1,70,2,68,1,69,3,71,1,73,2,74,1,75,2,76,1,77,1,86,2,87,1,93,2,94,8,101,2,102,4,100,2,103,3,104,1,106,1,107,5,105,4,108,7,109,6,110,1,111,10,113,4,114,3,119,6","user,9,2,13,2,56,1,66,1,51,1,52,1,53,1,54,1,55,1,57,1,78,1,94,2,101,1,102,1,103,1,104,1,108,3,124,5","user-configurable,92,2","users,94,1,104,1","uses,7,1,12,5,13,1,59,1,94,1,101,3,102,3,103,4,104,3,106,3,108,3","ushikubo,110,1,113,1","using,5,1,7,4,9,2,15,1,17,1,66,3,72,5,60,7,62,6,63,5,64,6,65,5,70,5,67,6,68,5,69,5,71,5,73,4,74,4,75,5,76,4,77,4,78,4,89,1,95,1,94,7,97,2,98,1,101,2,102,4,96,1,99,1,103,5,104,3,106,1,107,11,105,3,108,7,109,7,110,3,111,10,113,4,114,2,119,1,122,1","usually,39,1,47,1,56,1,66,1,72,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,71,1,73,1,75,4,76,1,87,1,89,1,103,1,105,1,111,1","utility,101,1,108,5","utilize,107,2","utilized,11,1,95,1,97,1,96,1,107,1,111,1,122,1,123,1","utilizes,94,1","utilizing,66,1,108,1","uv,121,1,123,1","ux,121,1,123,1","uy,121,1,123,1","uz,123,1","uzbekistan,25,2","v0,66,1,108,1","v01,60,2,70,1,68,1,69,2,102,2,107,1,109,1,111,1","v02,60,1,70,1,68,1,102,1,107,1,111,1","v03,60,1,70,1,68,1,69,2,102,1,107,1,109,1,111,1","v1,66,1,108,1","v11,60,2,70,1,68,1,69,2,102,2,107,1,109,1,111,1","v12,60,1,70,1,68,1,102,1,107,1,111,1","v2,66,1,108,1","v21,60,1,102,1","v22,60,1,102,1","v3,66,1,108,1","v3.1,62,1,103,2","v31,60,1,102,1","v32,60,1,102,1","v4,108,1","v4.02,62,1,103,2","v41,60,1,102,1","v5,108,1","v51,60,1,102,1","v6,108,1","v61,60,1,102,1","v7,108,1","v71,60,1,102,1","v8,108,1","v81,60,1,102,1","v9,108,1","v91,60,1,102,1","va,94,2,121,1,123,1","vac,9,1,77,1,91,2,92,1,94,13,117,3,114,5,118,1,119,6,124,1","vacuum,1,4","valid,94,1","validation,9,1,92,1","valuable,66,1,20,1,108,1","value,72,2,60,4,62,1,92,1,94,52,101,3,102,6,103,1,107,6,108,6,109,4,111,6,113,2,114,4,124,2","values,9,1,60,1,65,1,94,4,102,4,103,2,104,1,105,4,114,2,121,1,123,1","valve,20,5","vanuatu,25,2","vapor,114,1","variable,66,1,62,1,63,1,64,1,65,1,67,1,103,1,104,1,106,1,105,1,108,1,110,1,111,1,113,1","variables,9,5,60,1,70,1,68,1,69,1,92,1,101,1,102,1,107,1,109,1","variances,118,1","variation,79,1","variations,79,1,103,2,117,1,114,1,118,1,119,1","varies,114,1","variety,9,5,14,5,72,1,18,5,32,1,34,1,52,1,70,1,71,1,91,1,92,1,107,1,108,1,109,1,110,1,111,1,113,1","various,21,1,84,1,81,1,82,1,83,1,85,1,86,1,88,1,93,1,94,3,102,1,114,2,115,1,119,1","varistors,94,1","vary,107,1,109,1,111,1","vatican,25,2","vb,123,1","vc,121,1,123,1","vd,121,1,123,1","vdc,9,1,66,12,60,33,62,2,63,2,64,2,65,2,70,10,67,2,68,10,69,8,71,1,84,2,77,1,81,2,82,2,83,2,85,2,86,2,91,2,92,4,95,1,94,5,97,1,101,11,102,45,96,1,103,8,104,6,106,9,107,27,105,8,108,43,109,19,110,6,111,28,113,5,119,12,121,8,122,3,123,11,124,1","ve,121,1,123,1","vehicle,11,1","velocities,65,2,105,2","velocity,60,2,62,1,63,2,65,1,67,6,101,2,102,5,106,7,105,1,111,1","vending,117,1,114,1","vendor,79,1","vendor-independent,65,1","vendors,104,1","venezuela,25,2","ventura,23,1","verde,25,2","verification,121,1,123,1","verify,94,3,112,1","vermont,9,1","versatile,93,1,109,2,119,1","versatility,13,1","version,65,1,73,1,102,1","versions,9,1,67,1,94,1,106,1","vertical,90,5,92,2,93,24,94,2,107,4,108,2,118,4,119,7","vertically,93,1,94,1,119,1","vertrod,1,4","vf,123,1","via,62,1,63,1,64,1,65,1,79,2,95,1,94,1,97,1,96,1,107,1,105,1,108,1,109,1,110,1,111,1,113,2,122,1,123,1","vibration,66,1,90,1,92,1,93,1,94,2,101,3,102,3,100,1,103,3,104,3,106,1,105,1,108,4,110,1,113,1,114,7,118,3,119,1","vibrationrating,107,1,109,1,111,1","vibration-resistant,101,2,102,2,103,2,104,2,108,3","vietnam,25,2","viewed,94,2,101,2,102,1,103,2,104,1,106,2,107,2,105,4,108,1,109,1,113,1","viewing,16,1","vincent,25,2","virgin,25,4,92,1","virtually,12,2,93,1,94,1,119,1","visa,79,1","visual,66,1,101,1,102,1,103,1,104,1,106,1,105,1,108,2","void,94,1","volt,94,8,100,1,114,2","voltage,7,2,9,4,66,7,72,1,60,4,62,2,63,2,64,2,65,2,70,6,67,2,68,7,69,5,71,1,92,10,94,17,101,3,102,8,99,1,103,3,104,3,106,6,107,10,105,9,108,19,109,9,110,4,111,10,113,2,114,2,121,1,123,1,124,3","voltages,66,1,102,5,107,1,108,1,109,1","volts,19,1,22,2,60,2,84,1,81,1,82,1,83,1,85,1,86,1,92,1,94,5,102,6,100,4,108,2,114,8","volume,10,1,91,1","vp,105,2","wa,111,1","waiting,26,1,31,1,32,1,33,1,36,1,37,1,38,1,104,1,105,1","wall,68,1,92,1,94,1,101,1,102,1","wallis,25,2","walls,119,1","war,107,1","warm,51,1,52,1,53,1,93,1,94,1,119,3","warming,117,1","warning,94,1,98,1","warp,100,1","warranted,94,1","warranties,79,2,94,4","warranty,12,1,13,1,15,2,16,1,66,1,72,1,60,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,71,1,79,5,92,1,94,8,110,1,113,1","warranty.,15,4","wash,50,1","washdown,70,2,111,2","washer,73,2,109,2","washers,117,1","washington,1,1,23,1,112,1","wasn&rsquo,9,1","water,1,4,9,1,10,12,20,6,88,1,91,1,92,1,93,1,94,1,111,2,114,1,115,1,119,1","watering,114,1","waterproof,12,4,13,8,15,2","watlow,1,13,16,1,39,1,47,1,56,1,23,6,24,3,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,79,4,80,2","watlow-distributor.com,1,1,16,1,39,1,47,1,56,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1","watt,19,4,89,1,94,2,100,5,117,1","watts,19,4,84,1,81,1,82,1,83,1,85,1,86,1,100,8","wave,66,1,100,1,108,3","waveguide,7,2,72,1,107,7,109,7,110,3,111,7,113,4","wax,6,1,26,2,27,2,29,1,30,1,31,1,32,1,33,1,34,1,35,2,36,2,37,1,38,1,50,11,61,1","wax-based,50,1","way,8,1,104,1","wcpe,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,17,1,66,1,72,1,18,1,19,1,20,1,21,1,22,1,23,1,24,1,60,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,71,1,73,1,84,1,74,1,75,1,76,1,77,1,78,1,79,19,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,97,1,98,1,96,1,99,1,125,1","wcpsealers.com,1,1,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,1,17,1,39,1,47,1,56,1,66,1,72,1,18,1,19,1,20,1,21,1,22,1,23,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1,51,1,52,1,53,1,54,1,55,1,57,1,58,1,59,1,60,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,71,1,73,1,84,1,74,1,75,1,76,1,77,1,78,1,79,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,97,1,98,1,96,1,99,1,125,1","weak,108,1","wealth,7,1","wear,7,1,107,1,109,1,110,1,111,2,113,1","weatherproofed,10,1","website,7,1,8,1,9,1,10,1,11,1,12,1,13,1,14,1,15,1,16,2,17,1,39,2,47,2,56,2,66,1,72,1,18,1,19,1,20,1,21,1,22,1,23,1,26,2,27,2,29,2,30,2,31,2,32,2,33,2,34,2,35,2,36,2,37,2,38,2,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,2,50,2,51,2,52,2,53,2,54,2,55,2,57,2,58,2,59,2,60,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,71,1,73,1,84,1,74,1,75,1,76,1,77,1,78,2,79,4,81,1,82,1,83,1,85,1,86,1,87,1,88,1,89,1,90,1,91,1,93,1,95,1,97,1,98,1,96,1,99,1,103,2,104,1,112,1,121,2,122,2,123,2,124,2,125,1","weee,13,1,16,1","weeks,9,1,10,1,12,1,13,1,15,1,66,1,72,1,19,1,20,1,58,1,60,1,62,1,63,1,64,1,65,1,70,1,67,1,68,1,69,1,71,1,73,1,84,1,74,1,75,1,76,1,77,1,78,1,81,1,82,1,83,1,85,1,86,1,87,1,88,1,90,1,91,1,93,1,97,1","weight,10,3,20,1,26,1,27,1,29,1,30,1,31,1,32,1,33,1,34,1,35,1,36,1,37,1,38,1,88,1,92,1,94,2,107,2,109,1,114,12,115,4,119,2,124,2","weights,39,1,47,1,40,1,41,1,42,1,43,1,44,1,45,1,46,1,48,1,49,1,50,1","welded,88,1,114,1,115,1,123,1","welders,94,1","welding,47,1,46,1,48,1,118,1","well-known,7,1","wells,84,1,81,1,82,1,83,1,85,1,86,1,88,1,91,1,114,3,115,1","were,94,1,114,1","west,1,15,2,1,3,1,5,1,6,13,7,13,8,13,9,13,10,13,11,13,12,13,13,13,14,14,15,13,16,13,17,14,39,13,47,13,56,13,66,6,72,13,18,14,19,13,20,13,21,14,22,14,23,11,24,5,25,1,26,13,27,13,29,13,30,13,31,13,32,13,33,13,34,13,35,13,36,13,37,13,38,13,40,13,41,13,42,13,43,13,44,13,45,13,46,13,48,13,49,13,50,13,51,13,52,13,53,13,54,13,55,13,57,13,58,13,59,13,60,14,61,5,62,14,63,14,64,14,65,14,70,13,67,14,68,13,69,13,71,13,73,13,84,13,74,13,75,13,76,13,77,13,78,13,79,12,80,5,81,13,82,13,83,13,85,13,86,13,87,13,88,13,89,13,90,13,91,13,93,13,95,14,97,14,98,14,96,14,99,14,112,3,125,1","westcoastplastics.com,61,2,79,3,80,2","western,1,1,25,2","westtm,92,3","whether,79,1,118,1","whichever,16,2,66,2,94,1,108,2,117,1,114,4,121,1,123,1","while,7,3,32,1,34,1,41,1,90,1,94,6,102,1,106,1,108,1,114,2,118,1,119,1","white,44,1,101,2,102,1,103,1,106,2,107,2,105,1,108,1,109,2,110,2,111,2,113,1,119,2","who,94,1,97,1,122,1","whole,12,1","wide,14,6,56,1,18,6,32,1,34,1,55,1,68,1,69,1,92,1,93,2,94,2,114,1,119,2","widely,72,1,35,1,36,1,63,1,70,1,71,1,107,1,109,1,110,1,111,1,113,1","width,92,1,100,1,107,1,108,1,109,1,110,1,113,1","wind,10,1","window,92,1,94,1,101,1,102,1,106,1,105,1,108,3","windows,102,1","wingert,1,1,20,14","wingert-separators.php,20,4","wire,1,4,21,30,22,35,62,1,64,1,84,1,81,1,82,1,83,1,85,1,86,1,87,4,94,16,101,1,102,1,100,5,103,1,104,1,106,1,107,3,105,7,108,3,109,3,110,4,111,3,113,3,114,5,119,2,121,1,123,1,124,2","wirecolorcodes,107,1,109,1,111,1","wire-connectors.php,22,4","wired,66,4,101,1,102,1,108,4,114,1,119,1","wireless,66,1","wire-nichrome.php,21,4","wires,84,2,81,2,82,2,83,2,85,2,86,2,94,4,100,2,114,5,118,5","wiring,94,37,98,1,101,3,102,1,103,3,104,2,106,1,107,3,105,6,108,2,109,3,110,1,111,3,113,1,119,5,121,3,123,3,124,1","wiring-low,94,1","wiring-standard,94,1","without,6,1,7,1,9,1,72,1,38,1,60,1,62,1,63,1,64,1,65,1,67,1,71,1,79,2,88,1,92,1,94,5,117,2,110,1,114,3,115,1,118,2,119,2,121,1,123,1","withpipe,114,1","withstand,7,1,101,1,102,1,103,1,104,1,106,1,107,1,105,1,109,1,110,1,111,1,113,1","withstanding,101,1","withstands,93,1,119,1","wk6-21c,121,1,123,1","wk6-32s,95,1,96,1,121,1,123,1","won,10,1","woodworking,107,1,109,1","word,120,4","words,5,2","work,6,1,7,1,39,2,47,2,35,1,36,1,40,2,41,2,42,2,43,2,44,2,45,2,46,2,48,2,49,3,50,2,94,1,113,1,114,1","worked,6,1","worker,6,1,26,1,27,1,29,1,30,1,31,1,32,2,33,1,34,2,35,1,36,1,37,1,38,1,57,1","workmanship,94,1","works,13,4,16,4,39,1,56,1,35,1,36,1,40,1,44,1,49,2,51,1,52,1,55,1,98,1,99,1","world,15,1","worldwide,92,3","worn,7,1","worry,9,1","worse,7,1","worst,92,2,94,2","would,24,1,80,1,88,1,117,1,114,1,115,1,119,1","wrap&amp,13,1","write,94,1","writing,94,1","written,79,1,94,4","wrong,102,1,105,1","wsi,19,3,100,3","www.danaherindustrialcontrols.com,92,3","www.fenwalcontrols.com,117,3,114,9,115,1,118,5,119,5","www.gp50.com,121,2,122,2,123,2,124,2","www.mtssensor.co.jp,107,1,109,1,110,1,111,1,113,1","www.mtssensor.de,107,1,109,1,110,1,111,1,113,1","www.mtssensors.com,78,1,103,2,104,2,107,2,109,2,110,1,111,2,113,1","www.partlow.com,92,3","x1.5,111,1","x2,110,1","xapx,114,1","xapx2,114,1,118,1","xti-0010,20,1","xti-0050,20,1","xti-0075,20,1","xti-0125,20,1","xti-0150,20,1","xti-0200,20,1","xti-0250,20,1","xti-0300,20,1","yard,14,8","yards,14,8,18,28","yarn,19,1,100,5","year,10,1,13,1,16,1,72,1,71,1,110,1,113,1","years,8,1,12,1,13,1,66,1,72,1,23,2,60,1,62,1,63,1,64,1,65,1,70,2,67,1,68,1,69,1,71,1,82,1,92,1,93,1,94,2,107,1,109,1,110,1,111,1,113,1,114,1,119,1","yellow,6,2,32,1,34,1,35,26,36,26,61,2,101,2,102,1,103,1,106,1,107,1,105,1,108,1,109,1,111,1,113,1","yemen,25,2","yes,18,10","yet,15,1","yielding,19,1","yields,30,1,31,1,100,1","york,92,1","yugoslavia,25,2","zambia,25,2","zealand,25,2","zero,60,1,95,1,94,5,98,1,96,1,99,1,107,1,121,5,123,5,124,4","zimbabwe,25,2","zinc,91,1,114,1","zip,24,1,25,2,61,1,80,1,112,8","zone,101,5,102,8,103,5,104,3,106,6,107,11,105,7,108,9,109,1,110,2,111,4,113,1","zones,101,1,102,1,103,1,104,1,106,1,105,1,108,1"); arrFiles=new Array();arrFiles[0]=new Array(1,"","4 Oct 2011","West Coast Plastics Equipment - Distributors of Bag Sealers, Packaging Equipment, Watlow, Temposonics, Mold Release, Fenwal, Chillers and more!","West Coast Plastics, Watlow, bag sealers, packaging equipment, Audion, Gramatech, Packaging Aids, Accu-Seal, Emplex, Price-Driscoll, MTS, Temposonics, Schreiber Engineering, Vertrod, Technaseal, Pacemaker Packaging, impulse sealer, vacuum sealer, shrink ","West Coast Plastics Equipment supplies the plastics, injection molding, packaging and related industries. Featuring Watlow heaters, sensors and controls, MTS Temposonics position transducers, Price-Driscoll mold releases, Fenwal thermoswitches and many f","West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Plastics Industry Equipment West Coast Plastics Equipment, Inc. has been serving Western Industry since 1945 in the plastics, packaging, and related industries. Over a half century of leadership in supplying quality machinery, parts, accessories and service has made us the preferred source for plastics, process and packaging industry equipment. Watlow-Distributor.com Home Page - Watlow Heaters, Heating Elements, Temperature Controls, Power Controls, Thermocouples and Wire Now Order Online! WCPSealers.com Home Page - bag sealers, packaging equipment, sealer parts &amp; materials. Now Order Online! West Coast Plastics Equipment, Inc. 6122 W. Washington Blvd. Culver City, CA 90232 Phone: 800-392-8569, 323-870-7733 Fax: 310-837-4947 Office Hours: 8-5 PST, M-F MTS Temposonics Position Transducers - high resolution magnetostrictive linear position sensors Now Order Online! Price-Driscoll Mold Releases - parfilm, bomb lube, specialty releases, eject-it, clean-it mold cleaners &amp; rust inhibitor Now Order Online! Fenwal Temperature Controls Thermoswitches, Thermostats, Detect-A-Fire Now Order Online! Amcot Cooling Towers Now Order Online! Partlow Chart Recorders Now Order Online! GP:50 Melt Pressure Transducers Now Order Online! NEW! Cooper-Atkins EconoTemp Plus NEW!! Now Order Online! NEW! Cooper-Atkins AquaTuff Temp Meter NEW!! Now Order Online! NEW! Cooper-Atkins Infrared Thermometer NEW!! Now Order Online! Cooper-Atkins Pocket Test Thermometers NEW!! Now Order Online! Teflon Cloth Now Order Online! Teflon Tape - Adhesive Now Order Online! GP:50 Rupture Disks Now Order Online! Amptek Duo-Tape Heating Tape Now Order Online! Wingert Separators Now Order Online! Hook-Up Wire &amp; Connectors Now Order Online! Nichrome Element Wire Nichrome Element Wire Now Order Online! About Us | Contact Us | Request Catalog | This page last revised 10/4/2011 ",16);arrFiles[1]=new Array(2,"Login.php","","Customer Login","","","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Please login if you have an existing account. Email Address: Password: If you do not have an account, please register now. ",5);arrFiles[2]=new Array(3,"Logout.php","","Customer Login","","","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Please login if you have an existing account. Email Address: Password: If you do not have an account, please register now. ",5);arrFiles[3]=new Array(4,"Cart/cart.php","","Your Order ","","","Your cart is currently empty. (c) 2002 eCatalogBuilders , Licensed Software ",15);arrFiles[4]=new Array(5,"search.php","","Search Engine Builder Standard -- Search this site","","","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search within All text Title Keywords Descriptions File name using All words Any words Exact phrase ",6);arrFiles[5]=new Array(6,"Price-Driscoll-Mold-Release.php","","West Coast Plastics - Price-Driscoll Mold Releases","West Coast Plastics, Price-Driscoll, mold release, mold spray, silicone spray, mold cleaners, rust inhibitor, Ultra II, eject-it, parfilm, bomb lube, injection molding","West Coast Plastics offers Price-Driscoll Mold Releases and Mold Cleaning &amp; Maintenance products.. Price-Driscoll introduced the plastics industry to aerosol mold releases and offers specific formulations for each major plastics family.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Releases Aerosol Mold Releases, Specialized Formulations Price-Driscoll - Mold Release Pioneers In 1947, Price-Driscoll introduced the plastics industry to aerosol mold releases - a separate one for each major plastics family. Specific formulations worked better than the early do-all sprays. From those first specifics the entire line of tailored aerosols has evolved, without compromises or excuses. THEY WORK! Price-Driscoll mold releases offer you a blended balance between environmental and worker safety concerns with outstanding performance!! Download Price-Driscoll Mold Release Brochure (pdf 2.5MB) Now Order Online! Ultra 3 &amp; 4 Series Mold Releases THE PARFILMS Epoxy Parfilm Ultra 3 Epoxy Parfilm Ultra 4 Polyester Parfilm Ultra 3 Polyester Parfilm Ultra 4 Urethane Parfilm Ultra 3 Urethane Parfilm Ultra 4 THE UNIVERSALS Bomb Lube Blue Label Paintable Ultra 3 Bomb Lube Blue Label Paintable Ultra 4 Bomb Lube Yellow Label Ultra 3 Bomb Lube Yellow Label Ultra 4 SPECIALTY FORMULATIONS Anti-Stick for Food Processing Ultra 4 Polypropylene Ultra 4 Spectrum Series Eject-It Mold Releases #E20-3 All Purpose Food Grade Silicone - 3% #E20-6 All Purpose Food Grade Silicone - 6% #E21 All Purpose Paintable Silicone #E23 Paintable Thermoset Release #24 Paintable Dry Slip Release #E25 Paintable Food Grade Release #E26 Mineral Oil Release #E28 Fluorofilm Dry Coat Release #31 U.L. Polycarbonate Paintable Release #32 PMR Broad Spectrum U.L. Release #33 Petrolease Non-Silicone Release #34 Carnauba Wax Release - NEW!! Spectrum Series Clean-It Mold Cleaners #10 Heavy Duty All Purpose #11 Super Citri-Scent #12 Citri-Quick #13 Resin Invader #14 Non-Flammable for Hot Molds #15 A-HAH (Always Have At Hand) Cleaner/Degreaser #16 Mold Brite-Force 1 Anti-Rust Maintenance Products #60 Protect-It Anti-Rust Coating #MP101 Rust Inhibitor Spray Free Sample Go to our Sample Can Request Form to order a free sample can of any Price-Driscoll spray product. This page last modified on 6/29/2011 ",13);arrFiles[6]=new Array(7,"HTML/mtshome.php","","West Coast Plastics - MTS Temposonics Position Transducers","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Position Transducers Highly accurate absolute position sensors for linear measurement NOW ORDER ONLINE! Temposonics R-Series - High resolution (to 2 microns), Analog (Voltage &amp; Current) &amp; Digital outputs (SSI, Canbus, DeviceNet, Profibus &amp; EtherCat) RH &amp; RP &amp; RF-Series Rod, Profile &amp; Flex Sensor with Analog Output RH &amp; RP &amp; RF-Series Rod , Profile &amp; Flex Sensor with SSI Output RH &amp; RP &amp; RF-Series Rod , Profile &amp; Flex Sensor with CANbus Output RH &amp; RP &amp; RF-Series Rod, Profile &amp; Flex Sensor with DeviceNet Output RH &amp; RP &amp; RF-Series Rod, Profile &amp; Flex Sensor with EtherCAT Output RH &amp; RP &amp; RF-Series Rod, Profile &amp; Flex Sensor with Profibus Output Temposonics G-Series - The new G-Series position sensors feature a microprocessor-based design with enhanced diagnostics and programmability. They are available in both Hydraulic Rod Style and Profile Style housing configurations. Direct replacement for older Temposonics units (Tempo I, II, L-Series). GH &amp; GP-Series Rod &amp; Profile Sensors Temposonics L-Series - The L-Series P line has been discontinued. Order from the new Temposonics G Series Line , R Series Line or E Series Line for replacements. Call for assistance in upgrading your L-Series sensor, 800-392-8569. Temposonics E-Series - Economically Priced, Good resolution (to .002), Analog (voltage &amp; current) &amp; Digital Outputs (start/stop) EH Economy Hydraulic Rod Style Sensors EP &amp; EL Economy Profile-Style Sensors ER Economy Rod &amp; Cylinder-Style Sensors EP2 Economy Profile-Style Sensors - Analog Output EP2 Economy Profile-Style Sensors - Digital Output E-Series Accessories - Magnets, Connectors, Cordsets &amp; Mounting Hardware Temposonics II Series - Has been discontinued due to lack of availability of parts for this older technology. Call for assistance in upgrading your Tempo II sensor, 800-392-8569. Accessories Magnets &amp; Floats Extension Cables Connectors Mounting Hardware &amp; Power Supplies Sensor Programming Tools The NEW Temposonics G-Series featuring Integrated LEDs for enhanced monitoring &amp; diagnostics. Magnetostriction - How does it work? The Temposonics brand name was on the original magnetostrictive position sensor invented in 1970. This legacy, a wealth of practical industry experience, and an installed base of over 750,000 units is behind every MTS sensor. A current pulse (interrogation pulse) is launched in a specially designed magnetostrictive waveguide creating an instantaneous magnetic field along the active length of a sensor. This magnetic field then interacts with the magnetic field emanating from the magnet attached to a moveable machine part. The interaction of the two magnetic fields creates a torsional strain pulse which travels at sonic speed through the waveguide medium and is detected by the sensor&rsquo;s head electronics. The position of the magnet on the moveable machine part is determined by measuring the elapsed time between the launching of the interrogation pulse and the detection of the strain pulse. The result is a very precise, reliable, and repeatable position output. Molders - Potentiometers are Eating Your Profits!! Stop them with Temposonics The Problem: Conventional linear potentiometers (linear pots) are not engineered to withstand the stress imposed by injection molding machines. In addition, most linear pots can&rsquo;t stay on line while performing injector, ejector, and clamp functions at high cycle rates and with high acceleration forces. This problem is made worse by dust, dirt, and other pollutants common in the plant environment. As a result, linear pots need repeated maintenance and frequent replacement. And even while fully operational, there is continuous mechanical wear on sensing elements which risks costly damage to other machine components. The Cost: Increased downtime Reduced productivity Mold damage due to worn potentiometers Increased scrap The Solution: Temposonics linear transducers. The Reliability: MTS Temposonics transducers will outlast linear pots time and time again without periodic maintenance. The Reason: Since Temposonics uses proven magnetostrictive technology, none of the sensing elements make contact. That means Temposonics transducers will outlast linear pots with no repair and no downtime--no matter how challenging the cycle rates and forces. The Extras: Optional analog or digital outputs are available. Digital output minimizes noise, improves resolution, and sets the stage for the next generation of controls. Linear pots offer analog outputs only. The Clincher: MTS Temposonics transducers are priced comparable to a linear pot, while providing the performance quality of the well-known Temposonics line. Every facility with injection molding machines can improve productivity, increase equipment availability, and significantly reduce maintenance and replacements costs...with Temposonics. This page last modified on 5/20/2011 | Top of Page Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",21);arrFiles[7]=new Array(8,"HTML/Fenwal-Controls.php","","Fenwal Thermoswitch Temperature Controllers &amp; Fire Detectors - Plastics Equipment from West Coast Plastics","thermoswitch, West Coast Plastics, Fenwal, Tempswitch, Kidde Fenwal, temperature controller, thermostat, cartridge heater, fire detector, detect-a-fire","West Coast Plastics now offers the Fenwal Thermoswitch Temperature Controllers and Fire Detectors.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Temperature Controllers &amp; Fire Detection Devices Fenwal (Kidde-Fenwal) has lead the way in designing and manufacturing high quality temperature controllers, thermostats and fire detectors for over 65 years. Fenwal&rsquo;s Engineering and Manufacturing system is certified to international standard ISO9001.The Fenwal brand of temperature and fire detection products is well known throughout many industries for its high quality and reliability. The products are designed to provide excellent performance in the most demanding applications. Fenwal Series 17000 Thermoswitch Cartridge Style Fenwal Series 17100 Thermoswitch Hex Head Style Fenwal Series 17200 Thermoswitch Block Head Style Fenwal Series 17300 Thermoswitch Flange Head Style Fenwal Series 17800 Thermoswitch Junction Box Immersion Style Fenwal Series 18000 Thermoswitch Coupling Head Style Fenwal Series 11000 Protective Thermowell Fenwal Series 67000 Midget Thermoswitches Fenwal Series 30000 Surface Mount Thermostat Fenwal Series 20000 Snap Action Thermoswitch Fenwal Series 08-02 Snap Disc Thermostats Fenwal Detect-A-Fire Fire Detectors This page last modified on 5/10/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",16);arrFiles[8]=new Array(9,"HTML/Partlow-MRC5000-Chart-Recorders.php","","Partlow MRC5000 Chart Recorders - Equipment from West Coast Plastics","West Coast Plastics, Partlow, Danaher Industrial Controls, Circle Chart Recorder, MRC5000 Recorder, 1 Pen Chart, 2 pen chart, temperature controller, Circular chart paper","West Coast Plastics offers Partlow 1 &amp; 2 Pen Digital Chart Recorders. The MRC5000 is a digital circle chart recorder capable of measuring and controlling up to two process variables from a variety of inputs.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search PARTLOW MRC 5000 CHART RECORDERS 1 &amp; 2 Pen Digital Circle Chart Recorders The Partlow MRC 5000 is a 10&rdquo; circular chart recorder that was designed with simplicity and functionality in mind. The operation of this chart recorder is so easy that all of its instructions fit on one 4&rdquo; X 6&rdquo; card. The Partlow MRC 5000 is capable of measuring, recording, and controlling up to two process variables from a variety of inputs. It comes in two basic versions for trend recording &#150; one or two pens. The straightforwardness of these circular chart recorders is immediately evident just by looking at the unit&rsquo;s face. The operator interface, a four-digit display with three-button keypad, is made for simple daily operation and easy configuration. A clear prompting scheme provides rapid access to all configuration and operation data. The operator interface also provides access to test and calibration facilities with a convenient dual function MODE switch. As if configuring the Partlow MRC 5000 wasn&rsquo;t easy enough, there&rsquo;s also an optional Configurator port for ultimate programming ease. Using the optional PC program, parameters can be modified, saved, and downloaded in seconds. A quick look inside the casing and at the chart itself also speaks to the straightforward, functional design of the Partlow MRC 5000 circular chart recorders. You will find just one jumper to configure each port. The two pens, each with configurable spans, are positioned smoothly without any slidewire feedback; this simplifies design and improves reliability. In addition, the 10&rdquo; chart rotates at the speeds you select. Finding a place to install this circular chart recorder is easy, with its compact 2.5&rdquo; panel depth and short 1.3&rdquo; protrusion from the front panel. And, don&rsquo;t worry about harsh environments &#150; the Partlow MRC 5000 comes standard with a NEMA 3 rating. Applications - The Partlow MRC 5000 circular chart recorder is ideal for basic digital recording applications with shallow depth panel requirements. Process validation Trend analysis Regulatory compliance Product safety Industries - Oven, chamber, furnaces, heat treating, food processing, harsh water environments. Quick Specs Up to two process or limit alarms for each pen Optional Digital Communications package allows user to access process values, alarm conditions, and other data Optional configurator port allows for the use of a PC to modify, save, or download programming parameters Setup/Calibration seal protects the unit against unauthorized changes Universal inputs and power supply Standard NEMA 3 (NEMA 4X optional) protects the unit against harsh environments Agency approvals: UL, C-UL, CE and FM (pending) Download Partlow MRC 5000 Chart Recorder spec sheet (pdf format) Download Partlow MRC 5000 Chart Recorder user manual (pdf format) Partlow MRC5000 2 Pen Circle Chart Recorder. How to Order Partlow MRC5000 Chart Recorders When placing an order, build the desired model number using this model number guide (below). Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. Custom Ordering - Partlow MRC 5000 Chart Recorders 5 ____ ____ ____ ____ ____ ____ ____ __ __ 1 2 3 4 5 6 7 8 9 1. Model Price 5 = MRC 5000 Chart Recorder/Controller 875.00 2. Pen 1 Option 1 = Recorder Only N/C 2 = Recorder Controller - does not include a relay. Order relays in Pen 1 output options-required. 21.00 4 = High/Low Limit. Order relays in Pen 1 output options-required. 21.00 3. Pen 2 Option 0 = None N/C 1 = Recorder Only 288.00 2 = Recording Controller - does not include a relay. Order relays in Pen 2 output options-required. 302.00 4 = High/Low Limit. Order relays in Pen 2 output options-required. 302.00 4. Pen 1 Outputs 0 = None N/C 1 = One Relay 86.00 2 = Two Relays 155.00 5. Pen 2 Outputs 0 = None N/C 1 = One Relay 90.00 2 = Two Relays 155.00 6. Communication Option 0 = Recorder Only N/C 2 = RS-485 83.00 7. Enclosure Options 1 = Standard - NEMA 3 N/C 2 = Door Lock 83.00 3 = NEMA 4X 83.00 8. Operating Voltage 1 = Standard - 90 to 240 VAC N/C 3 = Standard Voltage Operation and Transmitter Power Supply 24 VDC 93.00 5 = CE &amp; Standard Voltage 30.00 7 = CE &amp; Standard Voltage &amp; Transmitter Power Supply 137.00 9. Suffix Blank = None N/C AA = Alarms &amp; Communications Connectivity Option (Allows for later field installation of both options) 36.00 Some configurations ship in 1-2 days, other in approx. 2-4 weeks. All items FOB: Factory, Vermont. This page last modified on 7/27/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",26);arrFiles[9]=new Array(10,"HTML/amcot-cooling-tower.php","","Amcot Cooling Towers - Equipment from West Coast Plastics","West Coast Plastics, Amcot, cooling tower, water chiller, Amcot ST-10, Amcot ST-25","West Coast Plastics offers Amcot Cooling Towers. The fiberglass circular design makes them rugged, compact, lightweight and economical.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Amcot Cooling Towers Fiberglass, Circular Design for Plant Process Water Cooling Amcot Cooling Towers are rugged, compact, light weight, and economical to install. They are made of durable fiberglass reinforced plastics that won \'t rust or corrode! The fiberglass casing and basin have a TEN YEAR GUARANTEE. FEATURES: The fan motor is weatherproofed and totally enclosed allowing for less noisy and more efficient long-term performance. The sprinkler pipes are sturdy PVC material pierced with closely-spaced holes allowing thorough distribution of water in a rotating spray covering the entire surface of the filler. The round design permits maximum air intake regardless of wind direction. Efficient operation results from the smooth pumping of recirculated water through the stand pipe and up into the sprinkler pipes. A large diameter outlet pipe draws a constant supply of cooled water from the basin to serve the facility. A large-capacity, durable water basin constructed from rust-proof fiberglass reinforced plastic guarantees low maintenance and long-term operation. The efficiently designed PVC filler creates a surface area that allows for maximum dispersion of water which creates a superior cooling effect. Housing panels and water basin are built of fiberglass reinforced plastic ensuring rust-free long term performance even under the most severe environmental conditions. Model No. Nominal Tonnage Fan Motor (HP) Air Volume (CFM) Water Flow (GPM) Weight Dry Weight Operating Price Order Quantity ST-5 3 1/6 2100 10 86 251 922.00 Enter qty: ST-8 5 1/6 2620 16 93 262 971.00 Enter qty: ST-10 6.5 1/4 3500 20 123 443 1,215.00 Enter qty: ST-15 10 1/4 4700 30 139 536 1,444.00 Enter qty: ST-20 13 1/2 6300 40 190 719 2,031.00 Enter qty: ST-25 16 3/4 7000 50 227 887 2,151.00 Enter qty: ST-30 20 1 8100 61 253 1074 2,492.00 Enter qty: ST-40 27 1-1/2 9800 83 369 1133 2,915.00 Enter qty: ST-50 35 1-1/2 11500 105 435 1313 3,258.00 Enter qty: ST-60 40 1-1/2 14700 125 504 1472 3,695.00 Enter qty: ST-70 48 1-1/2 17500 145 610 1555 4,335.00 Enter qty: ST-80 56 2 18900 168 642 1588 4,662.00 Enter qty: ST-100 69 3 24500 208 887 2361 5,599.00 Enter qty: ST-125 87 3 29060 262 1025 2983 7,099.00 Enter qty: ST-150 106 5 33260 318 1375 5731 7,973.00 Enter qty: ST-175 123 5 40250 369 1569 5887 9,862.00 Enter qty: ST-200 142 5 43760 426 1914 7612 11,004.00 Enter qty: Some items in stock. Out-of-stock items take 2-4 weeks. Please call for availability. FOB: Ontario, CA. This page last modified on 7/13/2009 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",38);arrFiles[10]=new Array(11,"HTML/GP50-Pressure-Transducers.php","","GP:50 Plastic Melt Pressure Transducers - Plastics Equipment from West Coast Plastics","West Coast Plastics, GP50, melt pressure transducer, plastic melt probe, melt thermocouple, plastic pressure transducer, melt pressure sensor, GP:50","West Coast Plastics now offers the GP:50 Plastics Melt Pressure Transducers, Transmitters, Sensors and Rupture Disks.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search GP:50 Plastic Melt Pressure Transducers GP:50 is a manufacturer of pressure, level &amp; temperature transmitters and transducers. We provide sensor solutions for the industrial, oil &amp; gas, automotive test stand, aero-space, military, injection molding (melt pressure), off-road vehicle, OEM and sanitary marketplace. The GP:50 product line of plastic melt pressure transducers and transmitters are based on the proven bonded strain gage principle successfully utilized in thousands of applications. Our unique design incorporates a heavier sensor allowing a thicker tip diaphragm, provides better linearity, and reduces costs. GP:50 Model 30 &amp; 31 Melt Pressure Transducers GP:50 Model 35 Melt Temperature/ Pressure Transducers GP:50 Series 1300 Melt Pressure Transducer Kits GP:50 Model 1211 Melt Pressure Indicator GP:50 Model 1254 Melt Pressure Indicator GP:50 Model RDEB Rupture Disks/ Burst Plugs This page last modified on 8/26/2009 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",13);arrFiles[11]=new Array(12,"HTML/Atkins-32322-EconoTemp.php","","Cooper-Atkins EconoTemp Plus 32322 Thermocouple Thermometer - Equipment from West Coast Plastics","West Coast Plastics, Cooper Atkins, 32322 Digital Thermometer, temperature meter, thermocouple probe","West Coast Plastics offers the Cooper-Atkins 32322 Thermocouple Thermometer. Uses any Type J or Type K probe or thermocouple (model dependent). Hand held, waterproof, tenth degree resolution.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search EconoTemp Plus 32322 Digital Thermocouple Thermometer Features &amp; Specifications: Accuracy: 1F&deg; (&plusmn;0.5C&deg;) -40&deg; to 495&deg;F (-40&deg; to 257&deg;C) &plusmn;2F&deg; (&plusmn;1C&deg;) over remainder of range Temperature Range: -40 to 1000&deg;F (-40 to 538&deg;C) Resolution: 0.1&deg;F from -40.0&deg; to 495&deg;F 0.1&deg;C from -40.0&deg; to 257&deg;C Whole Degree Resolution Over Remainder of Range Battery Type/Life: (3) AAA/4500 Hours Warranty: 5 years Housing: Shock Resistant ABS with Rubber Boot Compliances: CE Marking Extra Features: Uses any Type K Thermocouples Auto Shut Off Switches Quickly from Fahrenheit to Celsius Sealed Keypad Shock Resistant Rubber Boot Large, Easy-to-Read LCD Screen Turns off after five minutes of non-use High Accuracy .1&deg; Resolution Lanyard to Secure Handling Virtually No Recalibration Needed The Cooper-Atkins EconoTemp Plus Digital Thermocouple Thermometer features a powerful microprocessor delivering accuracy and reliability with non-volatile memory that stores the calibration setting and will virtually never need recalibration. 50318-K Ceramic Tip Surface Probe ORDERING INFORMATION - COOPER ATKINS ECONOTEMP PLUS Part No. Description Price Order Quantity 32322-K EconoTemp Plus Digital Thermocouple Thermometer 228.90 Enter qty: 50318-K Ceramic Tip Surface Probe - Type K 142.10 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 9/26/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",16);arrFiles[12]=new Array(13,"HTML/Atkins-AquaTuff.php","","Cooper-Atkins AquaTuff 35200-K Type J Thermocouple Meter - Equipment from West Coast Plastics","West Coast Plastics, Cooper Atkins, 35200-K Thermocouple, thermocouple probe, temperature meter","West Coast Plastics offers Cooper-Atkins 35200-K Thermocouple Meter. Works with any Type-K probe or thermocouple. Waterproof with tenth degree resolution.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search AquaTuff 35200-K Waterproof Thermocouple Instruments with Tenth Degree Resolution The Cooper-Atkins 35200 AquaTuff Series Thermocouple Instruments are highly accurate with an IPX7 waterproof standard rating. Wrap&amp;Stow integral probe and cable storage enclosures designs are available where the probe is factory calibrated to the instrument. The AquaTuff Series Thermocouple Instruments have a unique memory chip that stores calibration settings. They are highly accurate, NIST traceable and most importantly, as the AquaTuff name implies, extremely durable and IPX7 waterproof rated for even greater reliability in harsh environments. The AquaTuff 35200 allows for maximum versatility since the instrument can be used with any Type J or K (depending on model) Thermocouple probes. SPECIFICATIONS: Temperature Range : -100 to 999&deg;F (-73 to 537&deg;C) Resolution : Tenth Degree (0.1&deg;) 35200-K resolution 0.1&deg;/1&deg; user selectable Rugged ABS plastic housing Large, easy-to-read LCD screen IPX7 Waterproof Rated Auto Shut-off after 10 minutes of non-use (User selectable on 35200-K models) 352 Hold and backlight Uses any Type K or Type J probe Compliances : CE Marking, NSF, RoHS, WEEE Factory calibration constants stored in non-volatile memory Accuracy : With factory calibration, &plusmn;0.5F&deg; &plusmn;(0.3C&deg;) over entire measurement range at ambient temperatures between 68 to 86&deg;F (20 to 30&deg;C) No Calibration Required : Your AquaTuff is factory calibrated to N.I.S.T. traceable standards. Under normal operating conditions, it will not need to be recalibrated. Traceability : We certify that this instrument has been calibrated to temperature and/or electrical standards traceable to the U.S. Department of Commerce National Institute of Standards and Technology Battery Type/Life : 2 AAA Alkaline Batteries/ 1800 Hrs Batter compartment is reverse polarity protected to prevent damage to circuit board if batteries are installed improperly One per corrugated box with 4 color process label Warranty : Instrument - 5 years, Probe - 1 year Cooper-Atkins AquaTuff 35200-K 50318-K Ceramic Tip Surface Probe ORDERING INFORMATION - COOPER-ATKINS AQUATUFF 35200 SERIES THERMOCOUPLE Part No. Description Price Order Quantity 35200-J AquaTuff Type J Thermocouple Meter 382.80 Enter qty: 35200-K AquaTuff Type K Thermocouple Meter 382.80 Enter qty: 50318-J Ceramic Tip Surface Probe - Type J 142.10 Enter qty: 50318-K Ceramic Tip Surface Probe - Type K 142.10 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 9/26/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",19);arrFiles[13]=new Array(14,"HTML/teflon-cloth.php","","West Coast Plastics - Teflon Cloth","West Coast Plastics, teflon cloth, teflon tape, sealer tape, sealbar cover","West Coast Plastics offers teflon cloth and teflon tape. For use in a wide variety of applications including sealers, packaging machines, heat platens and hot plates.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Teflon Cloth (Non-Adhesive) West Coast Plastics offers teflon impregnated fiberglass cloth (no adhesive). For use in a wide variety of applications including sealers, packaging machines, heat platens and hot plates. The cloth is available in 3mil (.003), 5mil (.005), 6mil (.006) and 10mil (.010) in rolls up to 36 wide. Rolls are 36 yards long. If you don \'t see the size you need call us for a quote. We also have Teflon Tape . Part No. Description Price Order Quantity 381-5-163 Teflon Cloth - 1-5/8 x 5mil x 36 yards 49.68/roll Enter qty: 381-5-200 Teflon Cloth - 2 x 5mil x 36 yards 61.13/roll Enter qty: 381-5-250 Teflon Cloth - 2-1/2 x 5mil x 36 yards 76.43/roll Enter qty: 381-5-300 Teflon Cloth - 3 x 5mil x 36 yards 91.70/roll Enter qty: 381-5-400 Teflon Cloth - 4 x 5mil x 36 yards 122.27/roll Enter qty: 381-5-600 Teflon Cloth - 6 x 5mil x 36 yards 183.40/roll Enter qty: 381-3-1200 Teflon Cloth - 12 x 3mil x 36 yards 248.20/roll Enter qty: 381-3-YD Teflon Cloth - 3mil Square yard (36 x 36) 27.00/yard Enter qty: 381-5-YD Teflon Cloth - 5mil Square yard (36 x 36) 38.00/yard Enter qty: 381-6-YD Teflon Cloth - 6mil Square yard (36 x 36) 54.00/yard Enter qty: 381-10-YD Teflon Cloth - 10mil Square yard (36 x 36) 65.00/yard Enter qty: OTHER SIZES AVAILABLE - CALL FOR QUOTE. Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",22);arrFiles[14]=new Array(15,"HTML/Atkins-Digital-Pocket-Thermometer.php","","Cooper-Atkins Digital Pocket Test Thermometers - Equipment from West Coast Plastics","West Coast Plastics, Cooper Atkins, Pocket Test Thermometer, food temperature probe, DFP450W, DPP400W","West Coast Plastics offers Cooper-Atkins Digitial Pocket Test Thermometers. Accurate for Life. Lifetime Warranty.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Digital Pocket Test Thermometers Accurate for Life The Cooper-Atkins Digital Pocket Test Thermometers use the same innovative technology used in their popular thermocouple instruments - specified by some of the most sophisticated chains in the world - is now available in selected digital thermometers. With calibration settings stored in a non-volatile memory chip, field adjustment has become a thing of the past. And no risk of introducing error into the instrument. We are so committed to ensuring the accuracy of our products that we guarantee it. Temperature measurement using modern thermistor instrumanets is one of the most accurate, reliable, and inexpensive methods currently available. These charateristics, when married with today \'s powerful yet low-cost microcontrollers, produce a new generation of digital pocket test thermometers that far exceed the capabilities of their liquid or bi-metal ancestors. Cooper-Atkins DPP400W Features &amp; Specifications: DPP400W Pen Style Digital Pocket Test : -40&deg; to 392&deg;F / -40&deg; to 200&deg;C 2.75 / 69.9mm Stainless Steel Stem with a reduced tip for &lt;6 second response time Max/Min/Hold modes Waterproof Anti-microbial Additive Accurate for Life Lifetime Warranty DFP450W Digital Pocket Test with Temperature Alarm : -40 to 450&deg;F / -40 to 232&deg;C Adjustable - preset temperature alarm 4.75 / 121mm Stainless Steel Stem with a reduced tip for &lt;6 second response time Max/Min/Hold modes Completely waterproof to Spec IPX7 Anti-microbial Additive Accurate for Life Lifetime Warranty Cooper-Atkins DFP450W ORDERING INFORMATION - COOPER-ATKINS DIGITAL POCKET TEST THERMOMETER Part No. Description Price Order Quantity DPP400W Pen Style Digital Pocket Test Thermometer 27.50 Enter qty: DFP450W Digital Pocket Test Thermometer with Temperature Alarm 36.10 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 10/4/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",18);arrFiles[15]=new Array(16,"HTML/Atkins-Infrared-Thermometer.php","","Cooper-Atkins 412 Infrared Thermometer - Equipment from West Coast Plastics","West Coast Plastics, Cooper-Atkins, infrared thermometer, temperature sensor, type K thermocouple, infrared sensor, heat probe","West Coast Plastics offers the Cooper-Atkins Model 412 Infrared Thermometer with Laser Sighting. Hand held works with Type K thermocouple.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search 412 - Infrared Thermometer With Laser Sighting and Thermocouple Jack The Cooper-Atkins 412 Infrared Thermometer \'s innovative design incorporates a non-contact infrared thermometer with laser sighting to measure surface temperatures and a Type K thermocouple jack to measure internal temperatures. Accepts all Type K probes and has a distance to spot ratio of 12:1, single-spot laser sighting, high and low alarms and back-lit LCD for easy temperature viewing. Cooper-Atkins Infrared Thermometer shown with laser sighting on product. SPECIFICATIONS Temperature range: Infrared: -76&deg; to 932&deg;F / -60&deg; to 500&deg;C Thermocouple jack: -83&deg; to 1999&deg;F / -64&deg; to 1400&deg;C Accuracy: Infrared: &plusmn;4F&deg; / &plusmn;2C&deg; or 2% of reading whichever is greater Thermocouple jack: &plusmn;2F&deg; / &plusmn;1C&deg; or &plusmn;1% of reading whichever is greater Resolution: 0.1&deg;F / &deg;C Emissivity: default 0.95 (adjustable from 0.10 to 1.00) Response time: (90%) 1 second Auto shut-off: Infrared: after 60 seconds of non-use Thermocouple jack: after 12 minutes of non-use Fahrenheit / Celsius selectable Distance to spot: 12:1 Single point laser sighting Modes: max, min, dif, avg, hold, lock and probe LCD backlight Battery: 2 AAA 1.5v Alkaline (included) Soft carrying case (included) CE certified, WEEE marked, RoHS compliant One Year Warranty ORDERING INFORMATION - COOPER-ATKINS 412 INFRARED THERMOMETER To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity 412-0-8 Infrared Thermometer with Laser Sighting 185.00/ea Order Qty. 0 1 2 3 4 5 6 7 8 9 50318-K Cermaic Tip Surface Probe - Type K 142.10/ea. Order Qty. 0 1 2 3 4 5 6 7 8 9 Ships in 1-2 days, FOB: Culver City, CA. This page last modified on 9/26/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",26);arrFiles[16]=new Array(17,"HTML/GP50-Rupture-Disk.php","","GP:50 Model RDEB Rupture Disks - Equipment from West Coast Plastics","West Coast Plastics, GP50, melt pressure transducer, burst plug, rupture disk, plastic pressure transducer, melt pressure sensor, GP:50, blow-out plug","West Coast Plastics now offers Rupture Disks from GP50. For over-pressure protection of plastics molding processes.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search GP:50 Model RDEB Rupture Disks Designed for Over-Pressure Protection of Extruders &amp; Injection Molders GP:50 Rupture Disks , also known as burst plugs or blow-out plugs, are used for emergency pressure relief of an extruder or injection molder. They are designed to instantaneously rupture at a specific pressure. This provides reliable relief in applications where rapid pressure buildup can occur, protecting both personnel and equipment. The design assembly consists of a threaded tubular body with a rupture disk soldered onto the process end. The body is 300 series stainless steel and the disk itself is inconel material. The assembly is mounted directly into the molding equipment through a pressure port or thermocouple well where critical pressures occur. Features: One piece construction 300 Series stainless steel body material (other materials available) Inconel disk material standard Burst ratings 750 to 15,000 psig Burst tolerance: &plusmn; 10% 0% manufacturing range Short models are 1 nominal length (1.82 OAL) with slotted head Standard models are 6 nominal length (6.70 OAL) with 5/8 hex head Standard assemblies in stock Re-disking available Also Available: Melt Pressure Kits , Melt Pressure Transducers , Temperature/Pressure Transducers How to Order GP:50 Model RDEB Rupture disks When placing an order, build the desired model number using this model number guide (below). A selection of rupture disk configurations are available to meet the demands of your particular application. Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. If you have any questions about how to apply GP:50 Rupture Disks, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized GP:50 distributor and will be glad to help you design an effective melt pressure system to fit your application. R D E B - __ __ - # # . 5 M Model Body Pressure Range (psi) Rupture Disk Model RDEB = GP:50 Extrusion Rupture Disk / Burst Plug Body (choose 6H or 1SL) 6H = 6 nominal length (6.70 OAL) with 5/8 hex head - 109.00 each 1SL = 1 nominal length (1.82 OAL) with slotted head - 59.00 each Pressure Range (PSI) - (choose a range) 1.5M = 1,500 psi 2.5M = 2,500 psi 3.5M =3,500 psi 4.5M = 4,500 psi 5.5M = 5,500 psi 6.5M = 6,500 psi 7.5M = 7,500 psi 8.5M = 8,500 psi 9.5M = 9,500 psi 12.5M = 12,500 psi Most assemblies in stock, FOB: Grand Island, NY. This page last modified on 7/21/2009 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",17);arrFiles[17]=new Array(18,"HTML/teflon-adhesive.php","","West Coast Plastics - Teflon Tape","West Coast Plastics, teflon cloth, teflon tape, sealer tape, sealbar cover","West Coast Plastics offers teflon cloth and teflon tape. For use in a wide variety of applications including sealers, packaging machines, heat platens and hot plates.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Adhesive Teflon Tape West Coast Plastics offers teflon impregnated fiberglass adhesive tape. For use in a wide variety of applications including sealers, packaging machines, heat platens and hot plates. The teflon tape is available in 3mil (.003), 5mil (.005), 6mil (.006) and 10mil (.010) in rolls up to 36 wide. Rolls are 36 yards long. If you don \'t see the size you need call us for a quote. We also have non-adhesive Teflon Cloth . Part No. Description Liner Price per Roll Order Quantity 2815-3-050 Teflon Tape - 1/2 x 3mil x 36 yards no 25.44 Enter qty: 2815-5-050 Teflon Tape - 1/2 x 5mil x 36 yards no 31.71 Enter qty: 2815-5R-050 Teflon Tape - 1/2 x 5mil x 36 yards yes 31.71 Enter qty: 2815-6-050 Teflon Tape - 1/2 x 6mil x 36 yards no 34.33 Enter qty: 2815-10-050 Teflon Tape - 1/2 x 10mil x 36 yards no 39.52 Enter qty: 2815-10R-050 Teflon Tape - 1/2 x 10mil x 36 yards yes 39.52 Enter qty: 2815-3R-075 Teflon Tape - 3/4 x 3mil x 36 yards yes 38.16 Enter qty: 2815-5-075 Teflon Tape - 3/4 x 5mil x 36 yards no 49.50 Enter qty: 2815-5R-075 Teflon Tape - 3/4 x 5mil x 36 yards yes 49.50 Enter qty: 2815-6-075 Teflon Tape - 3/4 x 6mil x 36 yards no 51.50 Enter qty: 2815-10-075 Teflon Tape - 3/4 x 10mil x 36 yards no 59.27 Enter qty: 2815-3-100 Teflon Tape - 1 x 3mil x 36 yards no 50.88 Enter qty: 2815-5-100 Teflon Tape - 1 x 5mil x 36 yards no 63.42 Enter qty: 2815-5R-100 Teflon Tape - 1 x 5mil x 36 yards yes 63.42 Enter qty: 2815-6-100 Teflon Tape - 1 x 6mil x 36 yards no 68.67 Enter qty: 2815-10-100 Teflon Tape - 1 x 10mil x 36 yards no 79.03 Enter qty: 2815-3-150 Teflon Tape - 1-1/2 x 3mil x 36 yards no 76.33 Enter qty: 2815-5-150 Teflon Tape - 1-1/2 x 5mil x 36 yards no 95.12 Enter qty: 2815-5R-150 Teflon Tape - 1-1/2 x 5mil x 36 yards yes 95.12 Enter qty: 2815-10-150 Teflon Tape - 1-1/2 x 10mil x 36 yards no 118.55 Enter qty: 2815-3-200 Teflon Tape - 2 x 3mil x 36 yards no 101.77 Enter qty: 2815-5-200 Teflon Tape - 2 x 5mil x 36 yards no 126.83 Enter qty: 2815-5R-200 Teflon Tape - 2 x 5mil x 36 yards yes 126.83 Enter qty: 2815-10-200 Teflon Tape - 2 x 10mil x 36 yards no 158.06 Enter qty: 2815-10R-200 Teflon Tape - 2 x 10mil x 36 yards yes 158.06 Enter qty: 2815-5R-300 Teflon Tape - 3 x 5mil x 36 yards yes 190.25 Enter qty: 2815-5R-400 Teflon Tape - 4 x 5mil x 36 yards yes 253.67 Enter qty: OTHER SIZES AVAILABLE - CALL FOR QUOTE. Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",40);arrFiles[18]=new Array(19,"HTML/Amptek-Duotape.php","","Amptek Duo-Tape Heating Tape - Equipment from West Coast Plastics","West Coast Plastics, Amptek, HTS/Amptek, heating tape, flexible heat tape, duo-tape heating element","West Coast Plastics offers Amptek Duo-Tape Heating Tape for high temperature flexible heating applications. May be operated to 1400F.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Amptek Duo-Tape Heating Tape for High Temperature, Flexible Electric Heating Applications Amptek Duo Tape Heaters are high temperature flexible electric heating elements. A unique dual element circuit design allows the convenience of power leads on one end. Duo-Tapes may be used on conductive surfaces as well as ceramic or glass. AWH style heating tapes may be operated to 1400&ordm;F. Amptek Duo-Tape style heating tapes are offered in three standard watt densities:  \'D \' high @ 13 WSI,  \'DM \' medium @ 8.66 WSI, and  \'DL \' low @ 3.25 WSI. The heavy Amox Yarn braided outer cover provids added abrasion and dielectric protection for the element. The knitting puts more element length into a give area, providing longer life through better distribution of heat and yielding more flexibility. Download Amptek Duo-Tape Datasheet (pdf) Part No. Size Volts Watts Price Order Quantity AWH-D - 13 Watts/inch 2 , High Watt Density AWH-051-020D .5 x 2 \' 120 156 36.00 Enter qty: AWH-052-020D .5 x 2 \' 240 156 36.00 Enter qty: AWH-051-040D .5 x 4 \' 120 312 44.00 Enter qty: AWH-052-040D .5 x 4 \' 240 312 44.00 Enter qty: AWH-051-060D .5 x 6 \' 120 468 55.00 Enter qty: AWH-052-060D .5 x 6 \' 240 468 55.00 Enter qty: AWH-051-080D .5 x 8 \' 120 624 67.00 Enter qty: AWH-052-080D .5 x 8 \' 240 624 67.00 Enter qty: AWH-052-100D .5 x 10 \' 240 780 82.00 Enter qty: AWH-052-120D .5 x 12 \' 240 936 101.00 Enter qty: AWH-052-160D .5 x 16 \' 240 1248 125.00 Enter qty: AWH-101-020D 1 x 2 \' 120 312 44.00 Enter qty: AWH-102-020D 1 x 2 \' 240 312 44.00 Enter qty: AWH-101-040D 1 x 4 \' 120 624 61.00 Enter qty: AWH-102-040D 1 x 4 \' 240 624 61.00 Enter qty: AWH-102-060D 1 x 6 \' 240 936 79.00 Enter qty: AWH-102-080D 1 x 8 \' 240 1248 95.00 Enter qty: AWH-DM - 8.66 Watts/inch 2 , Medium Watt Density AWH-051-020DM .5 x 2 \' 120 104 36.00 Enter qty: AWH-052-020DM .5 x 2 \' 240 104 36.00 Enter qty: AWH-051-040DM .5 x 4 \' 120 208 44.00 Enter qty: AWH-052-040DM .5 x 4 \' 240 208 44.00 Enter qty: AWH-051-060DM .5 x 6 \' 120 312 55.00 Enter qty: AWH-052-060DM .5 x 6 \' 240 312 55.00 Enter qty: AWH-051-080DM .5 x 8 \' 120 416 67.00 Enter qty: AWH-052-080DM .5 x 8 \' 240 416 67.00 Enter qty: AWH-051-100DM 5 x 10 \' 120 520 82.00 Enter qty: AWH-052-100DM .5 x 10 \' 240 520 82.00 Enter qty: AWH-052-120DM .5 x 12 \' 240 624 101.00 Enter qty: AWH-052-160DM .5 x 16 \' 240 832 125.00 Enter qty: AWH-101-020DM 1 x 2 \' 120 208 44.00 Enter qty: AWH-102-020DM 1 x 2 \' 240 208 44.00 Enter qty: AWH-101-040DM 1 x 4 \' 120 416 61.00 Enter qty: AWH-102-040DM 1 x 4 \' 240 416 61.00 Enter qty: AWH-102-060DM 1 x 6 \' 240 624 79.00 Enter qty: AWH-102-080DM 1 x 8 \' 240 832 95.00 Enter qty: AWH-102-100DM 1 x 10 \' 240 986 119.00 Enter qty: AWH-DL - 3.25 Watts/inch, Low Watt Density AWH-051-020DL .5 x 2 \' 120 39 36.00 Enter qty: AWH-052-020DL .5 x 2 \' 240 39 36.00 Enter qty: AWH-051-040DL .5 x 4 \' 120 78 44.00 Enter qty: AWH-052-040DL .5 x 4 \' 240 78 44.00 Enter qty: AWH-051-060DL .5 x 6 \' 120 117 55.00 Enter qty: AWH-052-060DL .5 x 6 \' 240 117 55.00 Enter qty: AWH-051-080DL .5 x 8 \' 120 156 67.00 Enter qty: AWH-052-080DL .5 x 8 \' 240 156 67.00 Enter qty: AWH-051-100DL .5 x 10 \' 120 195 82.00 Enter qty: AWH-052-100DL .5 x 10 \' 240 195 82.00 Enter qty: AWH-051-120DL .5 x 12 \' 120 234 101.00 Enter qty: AWH-052-120DL .5 x 12 \' 240 234 101.00 Enter qty: AWH-051-160DL .5 x 16 \' 120 312 125.00 Enter qty: AWH-052-160DL .5 x 16 \' 240 312 125.00 Enter qty: AWH-101-020DL 1 x 2 \' 120 78 44.00 Enter qty: AWH-102-020DL 1 x 2 \' 240 78 44.00 Enter qty: AWH-101-040DL 1 x 4 \' 120 156 61.00 Enter qty: AWH-102-040DL 1 x 4 \' 240 156 61.00 Enter qty: AWH-101-060DL 1 x 6 \' 120 234 79.00 Enter qty: AWH-102-060DL 1 x 6 \' 240 234 79.00 Enter qty: AWH-101-080DL 1 x 8 \' 120 312 95.00 Enter qty: AWH-102-080DL 1 x 8 \' 240 312 95.00 Enter qty: AWH-102-100DL 1 x 10 \' 240 385 119.00 Enter qty: AWH-102-120DL 1 x 10 \' 240 468 135.00 Enter qty: AWH-102-160DL 1 x 16 \' 240 624 158.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 4/14/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",81);arrFiles[19]=new Array(20,"HTML/Wingert-Separators.php","","Wingert Solid-Liquid Separators - Equipment from West Coast Plastics","West Coast Plastics, Wingert, cooling tower, solid liquid separator, cluster valve","West Coast Plastics offers Solid-Liquid Separators by Wingert. Ideal for cooling towers and other process water applications.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Wingert Solid-Liquid Separators Ideal for Cleaning &amp; Maintaining Cooling Tower Systems Known for reliable and maintenance free operation, Wingert Separators are the economical solution for the removal of solids such as sand, dirt, metal chips, and sludge. Ideal for cooling towers and other process water applications, these separators protect valuable equipment by removing damaging solids from the water. Their maintenance free design features no moving parts or filter media. Centrifugal force slings the debris outward &amp; downward past the spin/trap plate and into the dirt holding chamber. An infrequent 5-second opening of the dirt holding chamber purge valve is the only attention required. Model No. Old Model Number Line Size Flow Range Overall Length Overall Diameter Approx. Weight Drain Size Price Order Quantity XTI-0050 05 1/2 8-14 GPM 22-7/16 6 12 lbs. 3/4 608.00 Enter qty: XTI-0075 15 3/4 14-25 GPM 22-7/16 6 16 lbs. 3/4 612.00 Enter qty: XTI-0010 25 1 28-49 GPM 22-7/16 6 18 lbs. 3/4 624.00 Enter qty: XTI-0125 26 1-1/4 49-84 GPM 29-7/8 6 22 lbs. 3/4 633.00 Enter qty: XTI-0150 28 1-1/2 67-115 GPM 30 6 22 lbs. 3/4 641.00 Enter qty: XTI-0200 35 2 90-157 GPM 34 10 42 lbs. 1-1/2 881.00 Enter qty: XTI-0250 38 2-1/2 129-224 GPM 34-7/16 10 42 lbs. 1-1/2 944.00 Enter qty: XTI-0300 40 3 205-355 GPM 33-7/8 10 46 lbs. 1-1/2 1,097.00 Enter qty: Option C - 2 FNPT Larger Cleanout 173.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 7/13/2009 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",25);arrFiles[20]=new Array(21,"HTML/wire-nichrome.php","","West Coast Plastics - Nichrome Wire","West Coast Plastics, Nichrome, sealer wire, High Temperature wire","West Coast Plastics offers nichrome heat element wire, high temperature hookup wire and connectors.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Nichrome Wire West Coast Plastics offers nichrome wire in round and flat ribbon styles. Nichrome (nickel-chromium) wire is used in heaters and as heating elements on various types of bag sealers. We stock several sizes for immediate shipment. Other sizes available on a special order basis, call 800-392-8569 for more information. Part No. Description Price Order Quantity NICHROME ELEMENT WIRE Nich-036-50 Nichrome Element Wire - round 19 ga. (.036) - 50-foot roll 75.00/roll Enter qty: Nich-1254-50 Nichrome Element Wire - flat - 1/8 x .004 - 50-foot roll 67.50/roll Enter qty: Nich-1255-50 Nichrome Element Wire - flat - 1/8 x .005 - 50-foot roll 67.50/roll Enter qty: Nich-1884-50 Nichrome Element Wire - flat - 3/16 x .004 - 50-foot roll 67.50/roll Enter qty: Nich-1886-50 Nichrome Element Wire - flat - 3/16 x .0063 - 50-foot roll 67.50/roll Enter qty: Nich-255H Nichrome Element Wire - flat - 1/4 x .005 Hard Tempered (per foot) 2.50/ft. Enter qty: Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",16);arrFiles[21]=new Array(22,"HTML/wire-connectors.php","","West Coast Plastics - Hi-Temp Hook-Up Wire &amp; Connectors","West Coast Plastics, Hookup wire, High Temperature wire, Hi Temp Connectors, Ring Terminals","West Coast Plastics offers high temperature hookup wire and connectors.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Hi-Temp Hookup Wire &amp; Connectors West Coast Plastics also stocks quality high temperature wire and connectors for appliances, cooking equipment, electric heaters, ovens, kilns, motors, transformers, furnaces, heating and air conditioning equipment and more. You can find high temperature wire with hard to find temperature ratings up to 1000&deg;F, in stock and ready-to-ship. TGGT hookup wire is rated to 600 volts, 482&deg;F (250&deg;C) with fiberglass insulation and nickel plated copper conductor. MGT-1000 hookup wire is rated to 600 volts, 1000&deg;F (538&deg;C) with fiberglass insulation and nickel plated copper conductor. The high temperature non-insulated connectors are made of nickel plated steel and rated to 900&deg;F (482&deg;C). NOTE: 50-foot minimum order on hookup wire. TGGT High Temperature Hookup Wire. Wire connectors - ring terminals, fork terminals &amp; butt connectors. Part No. Description Price Order Quantity HIGH TEMPERATURE HOOKUP WIRE TGGT-18 Hookup Wire - 18 ga. - 482&deg;F 1.00/ft. Order Qty. 0 50 ft 100 ft 150 ft 200 ft 250 ft 300 ft 500 ft 1000 ft 2000 ft TGGT-16 Hookup Wire - 16 ga. - 482&deg;F 1.10/ft. Order Qty. 0 50 ft 100 ft 150 ft 200 ft 250 ft 300 ft 500 ft 1000 ft 2000 ft TGGT-14 Hookup Wire - 14 ga. - 482&deg;F 1.20/ft. Order Qty. 0 50 ft 100 ft 150 ft 200 ft 250 ft 300 ft 500 ft 1000 ft 2000 ft TGGT-12 Hookup Wire - 12 ga. - 482&deg;F 1.25/ft. Order Qty. 0 50 ft 100 ft 150 ft 200 ft 250 ft 300 ft 500 ft 1000 ft 2000 ft TGGT-10 Hookup Wire - 10ga. - 482&deg;F 1.50/ft. Order Qty. 0 50 ft 100 ft 150 ft 200 ft 250 ft 300 ft 500 ft 1000 ft 2000 ft TGGT-08 Hookup Wire - 8 ga. - 482&deg;F 2.50/ft. Order Qty. 0 50 ft 100 ft 150 ft 200 ft 250 ft 300 ft 500 ft 1000 ft 2000 ft MGT1000-14 Hookup Wire - 14 ga. - 1000&deg;F 1.70/ft. Order Qty. 0 50 ft 100 ft 150 ft 200 ft 250 ft 300 ft 500 ft 1000 ft 2000 ft MGT1000-12 Hookup Wire - 12 ga. - 1000&deg;F 2.00/ft. Order Qty. 0 50 ft 100 ft 150 ft 200 ft 250 ft 300 ft 500 ft 1000 ft 2000 ft MGT1000-10 Hookup Wire - 10 ga. - 1000&deg;F 3.00/ft. Order Qty. 0 50 ft 100 ft 150 ft 200 ft 250 ft 300 ft 500 ft 1000 ft 2000 ft HIGH TEMPERATURE WIRE CONNECTORS TO 900&deg;F G21-423 Ring Terminals - #22-18 Ga., #8-10 Stud - 100/pack 17.50/pk. Enter qty: G21-425 Ring Terminals - #16-14 Ga., #8-10 Stud - 100/pack 17.50/pk. Enter qty: G21-427 Ring Terminals - #12-10 Ga., #8-10 Stud - 100/pack 17.50/pk. Enter qty: G21-442 Ring Terminals - #8 Ga., 1/4 Stud - 25/pack 10.00/pk. Enter qty: G21-411 Butt Connectors - #16-14 Ga., - 100/pack 17.50/pk. Enter qty: G21-412 Butt Connectors - #12-10 Ga., - 100/pack 17.50/pk. Enter qty: Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",30);arrFiles[22]=new Array(23,"HTML/aboutwcpe.php","","About West Coast Plastics Equipment","","West Coast Plastics Equipment supplies the plastics, injection molding, packaging and related industries. Featuring Watlow heaters, sensors and controls, MTS Temposonics position transducers, Price-Driscoll mold releases and many fine lines of sealers an","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search West Coast Plastics Equipment, Inc. has been an Authorized Watlow Electric distributor for over 50 years. We offer the complete line of Watlow heaters, heating elements, temperature controls, power controls, thermocouples and temperature sensors to the packaging, plastics, food, medical, electronics, aerospace, and many other industries. Six decades of pioneering and leadership in supplying quality machinery, parts, accessories and service has made us the preferred source for thermal process equipment. Our main office has been at the same location in Culver City, California for over 40 years. Helpful representatives are available to meet your needs. Our business hours are 8:00am-5:00pm PST, Monday through Friday. We also have field reps that cover Southern California and Arizona to provide on-site technical assistance. MAIN OFFICE: West Coast Plastics Equipment, Inc. 6122 W. Washington Blvd. Culver City, CA 90232 Phone: (800) 3WATLOW, (323) 870-7733 Fax: (310) 837-4947 Email: info@westcoastplastics.com LOS ANGELES, ORANGE, VENTURA &amp; SANTA BARBARA COUNTIES FIELD REP: Peter Cook Palmdale, CA Cell Phone: (323) 459-3787 Fax: (661) 285-0175 Email: peter@westcoastplastics.com SAN BERNARDINO, RIVERSIDE &amp; SAN DIEGO COUNTIES FIELD REP: Tom Baarstad Chino Hills, CA Cell Phone: (909) 636-8635 Fax: (909) 606-1818 Email: tom@westcoastplastics.com ARIZONA FIELD REP: Mike Barrett Scottsdale, AZ Phone: (480) 443-9669 Fax: (480) 991-2484 Cell Phone: (602) 524-7120 Email: mike@westcoastplastics.com Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",8);arrFiles[23]=new Array(24,"catalogreq.html","1 Feb 2011","West Coast Plastics - Catalog &amp; Brochure Request Form","","","West Coast Plastics Equipment Catalog &amp; Brochure Request Form Name** Company** Address 1** (no PO boxes) Address 2 City, State** Zip/Postal Code** Country Due to postage costs we can only send catalogs to the USA. Phone Email** ** Required information. Comments Catalog / Brochure Requested 2011 Sealers Catalog Watlow Heaters Watlow Sensors &amp; Controllers MTS Temposonics Transducers NOTE: We can only send Watlow &amp; MTS Catalogs to our authorized distributor territory of California, Nevada, Arizona &amp; New Mexico. Price-Driscoll Mold Releases Other Info Needed: Please have a sales rep call me I would like a demo Return to WCPE Home Page ",4);arrFiles[24]=new Array(25,"NewAccount.php","","Untitled Page","","","West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Customer registration Please fill required information marked with * Email Address: * (Your email address will be used for future login) Login name: * -- Password: * Confirm Password: * Shipping Information First Name: * Last Name: * Company: * Address 1: * Address 2: City: * State: * Zip: * Country: Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua &amp; Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia Botswana Bouvet Island Brazil British Indian Ocean Territory British Virgin Islands Brunei Bulgaria Burkina Faso Myanmar Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile Christmas Island Cocos Islands Colombia Comoros Cook Islands Costa Rica Cote d Ivoire Croatia Cuba Cyprus Czech Republic Democratic Republic of Congo Denmark Djibouti Dominica Dominican Republic East Timor Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Faeroe Islands Falkland Islands Federal Republic of Yugoslavia Federated States of Micronesia Fiji Finland France France, Metropolitan French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Germany Ghana Gibraltar United Kingdom Greece Greenland Grenada Guadeloupe Guam Guatemala Guinea Guinea-Bissau Guyana Haiti Heard and McDonald Islands Honduras Hong Kong Hungary Iceland India Indonesia Iran Iraq Israel Italy Jamaica Japan Jordan Kazakhstan Kenya Kiribati Kuwait Kyrgyzstan Laos Latvia Lebanon Lesotho Liberia Libya Liechtenstein Lithuania Luxembourg Macau Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Moldova Monaco Mongolia Montserrat Morocco Mozambique Namibia Nauru Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island North Korea Northern Mariana Islands Norway Oman Pakistan Palau Panama Papua New Guinea Paraguay Peoples Republic of China Peru Philippines Pitcairn Islands Poland Portugal Puerto Rico Qatar Republic of Congo Republic of Ireland Republic of Yemen Reunion Romania Russia Rwanda S. Georgia and S. Sandwich Islands Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Seychelles Sierra Leone Singapore Slovakia Slovenia Solomon Islands Somalia South Africa South Korea Spain Sri Lanka St. Helena St. Kitts &amp; Nevis St. Lucia St. Pierre &amp; Miquelon St. Vincent &amp; the Grenadines Sudan Suriname Svalbard Swaziland Sweden Switzerland Syria Taiwan Tajikistan Tanzania Thailand Togo Tokelau Tonga Trinidad &amp; Tobago Tunisia Turkey Turkmenistan Turks &amp; Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United States Uruguay US Minor Outlying Islands US Virgin Islands Uzbekistan Vanuatu Vatican City State Venezuela Vietnam Wallis &amp; Futuna Islands Western Sahara Zambia Zimbabwe * Phone Number: * Billing Information same as shipping First Name: * Last Name: * Company: Address 1: * Address 2: City: * State: * Zip: * Country: Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua &amp; Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia Botswana Bouvet Island Brazil British Indian Ocean Territory British Virgin Islands Brunei Bulgaria Burkina Faso Myanmar Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile Christmas Island Cocos Islands Colombia Comoros Cook Islands Costa Rica Cote d Ivoire Croatia Cuba Cyprus Czech Republic Democratic Republic of Congo Denmark Djibouti Dominica Dominican Republic East Timor Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Faeroe Islands Falkland Islands Federal Republic of Yugoslavia Federated States of Micronesia Fiji Finland France France, Metropolitan French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Germany Ghana Gibraltar United Kingdom Greece Greenland Grenada Guadeloupe Guam Guatemala Guinea Guinea-Bissau Guyana Haiti Heard and McDonald Islands Honduras Hong Kong Hungary Iceland India Indonesia Iran Iraq Israel Italy Jamaica Japan Jordan Kazakhstan Kenya Kiribati Kuwait Kyrgyzstan Laos Latvia Lebanon Lesotho Liberia Libya Liechtenstein Lithuania Luxembourg Macau Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Moldova Monaco Mongolia Montserrat Morocco Mozambique Namibia Nauru Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island North Korea Northern Mariana Islands Norway Oman Pakistan Palau Panama Papua New Guinea Paraguay Peoples Republic of China Peru Philippines Pitcairn Islands Poland Portugal Puerto Rico Qatar Republic of Congo Republic of Ireland Republic of Yemen Reunion Romania Russia Rwanda S. Georgia and S. Sandwich Islands Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Seychelles Sierra Leone Singapore Slovakia Slovenia Solomon Islands Somalia South Africa South Korea Spain Sri Lanka St. Helena St. Kitts &amp; Nevis St. Lucia St. Pierre &amp; Miquelon St. Vincent &amp; the Grenadines Sudan Suriname Svalbard Swaziland Sweden Switzerland Syria Taiwan Tajikistan Tanzania Thailand Togo Tokelau Tonga Trinidad &amp; Tobago Tunisia Turkey Turkmenistan Turks &amp; Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United States Uruguay US Minor Outlying Islands US Virgin Islands Uzbekistan Vanuatu Vatican City State Venezuela Vietnam Wallis &amp; Futuna Islands Western Sahara Zambia Zimbabwe * Phone Number: * Include me in mail list: ",26);arrFiles[25]=new Array(26,"HTML/PD-Epoxy-Parfilm-4.php","","Price-Driscoll Epoxy Parfilm Ultra 4 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Epoxy Parfilm ultra, epoxy parafilm, ultra 4 mold release","West Coast Plastics offers Price-Driscoll Epoxy Parfilm Ultra 4 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Epoxy Parfilm Ultra 4 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Epoxy Parfilm Ultra 4 Mold Release is recommended for epoxy resins. Its highly effective ultra-thin film forming application offers a better release than polyvinyl alcohol or wax. Its ultra-thin film maintains the fidelity of the cast piece and affords better surface reproduction and finish. Heat stable to 635&deg;F . The Ultra 4 group of mold releases is engineered for molding plastics that exhibit solvent sensitivity. Ultra 4 \'s are a highly sophisticated family of solventless mold releases. Cycle times are faster and production is more efficient as no time is lost waiting for a solvent to evaporate. Release agent is fast drying with the same time proven and active ingredients found in our other Ultra mold releases. The propellants and active ingredients also support commitment to environmental responsiblity, worker safety, prudent and economically productive manufacturing practices. Use Ultra 4 with complete confidence on wax, plastics or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable by aerosol standards Nearly odorless No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 12 ounces per can Solvent-less (contains dimethyl-ether) Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - EPOXY PARFILM ULTRA 4 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Epoxy Parfilm Ultra 4 Mold Release - Quantity of 1-3 Cases 86.40/cs Order Qty. 0 1 case 2 cases 3 cases Epoxy Parfilm Ultra 4 Mold Release - Quantity of 4-24 Cases 82.20/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Epoxy Parfilm Ultra 4 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 10.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Epoxy Parfilm Ultra 4 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[26]=new Array(27,"HTML/PD-Epoxy-Parfilm-3.php","","Price-Driscoll Epoxy Parfilm Ultra 3 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, epoxy parfilm ultra, epoxy parafilm, ultra 3 mold release","West Coast Plastics offers Price-Driscoll Epoxy Parfilm Ultra 3 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Epoxy Parfilm Ultra 3 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Epoxy Parfilm Ultra 3 Mold Release is recommended for epoxy resins. Its highly effective ultra-thin film forming application offers a better release than polyvinyl alcohol or wax. Its ultra-thin film maintains the fidelity of the cast piece and affords better surface reproduction and finish. Heat stable to 635&deg;F. The Ultra 3 family of mold release incorporates a non-flammable solvent (nPB) suggested by the Significant New Alternatives Products (SNAP) sector of the EPA. Ultra 3 mold releases are products that represent the fine balance of commitment to environmental responsibility, worker safety, prudent manufacturing practices and sound business economy. Use Ultra 3 on steel molds, but not on sensitive wax, plastic or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable Non-VOC No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 18 ounces per can nPB Solvent Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - EPOXY PARFILM ULTRA 3 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Epoxy Parfilm Ultra 3 Mold Release - Quantity of 1-3 Cases 113.40/cs Order Qty. 0 1 case 2 cases 3 cases Epoxy Parfilm Ultra 3 Mold Release - Quantity of 4-24 Cases 109.80/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Epoxy Parfilm Ultra 3 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 12.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Epoxy Parfilm Ultra 3 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[27]=new Array(28,"HTML/Price-Driscoll-brochure.pdf","29 Jun 2011","Layout 1","","","",2483);arrFiles[28]=new Array(29,"HTML/PD-Urethane-Parfilm-3.php","","Price-Driscoll Urethane Parfilm Ultra 3 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, urethane parfilm ultra, urethane parafilm, ultra 3 mold release","West Coast Plastics offers Price-Driscoll Urethane Parfilm Ultra 3 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Urethane Parfilm Ultra 3 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Urethane Parfilm Ultra 3 Mold Release forms an ultra-thin coating that allows excellent reproduction of your urethane castings. This chemically inert release agent is formulated specifically for urethanes and is heat stable to 575&deg;F. The Ultra 3 family of mold release incorporates a non-flammable solvent (nPB) suggested by the Significant New Alternatives Products (SNAP) sector of the EPA. Ultra 3 mold releases are products that represent the fine balance of commitment to environmental responsibility, worker safety, prudent manufacturing practices and sound business economy. Use Ultra 3 on steel molds, but not on sensitive wax, plastic or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable Non-VOC No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 18 ounces per can nPB Solvent Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - URETHANE PARFILM ULTRA 3 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Urethane Parfilm Ultra 3 Mold Release - Quantity of 1-3 Cases 113.40/cs Order Qty. 0 1 case 2 cases 3 cases Urethane Parfilm Ultra 3 Mold Release - Quantity of 4-24 Cases 109.80/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Urethane Parfilm Ultra 3 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 12.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Urethane Parfilm Ultra 3 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[29]=new Array(30,"HTML/PD-Polyester-Parfilm-3.php","","Price-Driscol Polyester Parfilm Ultra 3 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Polyester parfilm ultra, polyester parafilm, ultra 3 mold release","West Coast Plastics offers Price-Driscoll Polyester Parfilm Ultra 3 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Polyester Parfilm Ultra 3 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Polyester Parfilm Ultra 3 Mold Release is a micro-thin film forming release agent formulated expressly for polyester resin systems, filled polyester resins and fiberglass reinforced polyester. Its film-forming ability inhibits the migration of the monomer catalyst, impedes the degradation of the mold and yields longer mold life. Heat stable to 600&deg;F. The Ultra 3 family of mold release incorporates a non-flammable solvent (nPB) suggested by the Significant New Alternatives Products (SNAP) sector of the EPA. Ultra 3 mold releases are products that represent the fine balance of commitment to environmental responsibility, worker safety, prudent manufacturing practices and sound business economy. Use Ultra 3 on steel molds, but not on sensitive wax, plastic or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable Non-VOC No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 18 ounces per can nPB Solvent Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - POLYESTER PARFILM ULTRA 3 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Polyester Parfilm Ultra 3 Mold Release - Quantity of 1-3 Cases 113.40/cs Order Qty. 0 1 case 2 cases 3 cases Polyester Parfilm Ultra 3 Mold Release - Quantity of 4-24 Cases 109.80/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Polyester Parfilm Ultra 3 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 12.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Polyester Parfilm Ultra 3 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[30]=new Array(31,"HTML/PD-Polyester-Parfilm-4.php","","Price-Driscoll Polyester Parfilm Ultra 4 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Polyester parfilm ultra, polyester parafilm, ultra 4 mold release","West Coast Plastics offers Price-Driscoll Polyester Parfilm Ultra 4 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Polyester Parfilm Ultra 4 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Polyester Parfilm Ultra 4 Mold Release is a micro-thin film forming release agent formulated expressly for polyester resin systems, filled polyester resins and fiberglass reinforced polyester. Its film-forming ability inhibits the migration of the monomer catalyst, impedes the degradation of the mold and yields longer mold life. Heat stable to 600&deg;F. The Ultra 4 group of mold releases is engineered for molding plastics that exhibit solvent sensitivity. Ultra 4 \'s are a highly sophisticated family of solventless mold releases. Cycle times are faster and production is more efficient as no time is lost waiting for a solvent to evaporate. Release agent is fast drying with the same time proven and active ingredients found in our other Ultra mold releases. The propellants and active ingredients also support commitment to environmental responsiblity, worker safety, prudent and economically productive manufacturing practices. Use Ultra 4 with complete confidence on wax, plastics or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable by aerosol standards Nearly odorless No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 12 ounces per can Solvent-less (contains dimethyl-ether) Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - POLYESTER PARFILM ULTRA 4 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Polyester Parfilm Ultra 4 Mold Release - Quantity of 1-3 Cases 86.40/cs Order Qty. 0 1 case 2 cases 3 cases Polyester Parfilm Ultra 4 Mold Release - Quantity of 4-24 Cases 82.20/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Polyester Parfilm Ultra 4 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 10.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Polyester Parfilm Ultra 4 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[31]=new Array(32,"HTML/PD-Blue-Label-4.php","","Price-Driscoll Bomb Lube Blue Label Ultra 4 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Blue Label ultra, bomb lube blue, ultra 4 mold release","West Coast Plastics offers Price-Driscoll Bomb Lube Blue Label Ultra 4 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Bomb Lube Blue Label Ultra 4 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Bomb Lube Blue Label Ultra 4 Mold Release is a blend of modified siloxanes formulated for a wide variety of plastics. It is an ambivalent mold release in that it affords excellent release characteristics while allowing the adhesion of post molding decoration. Use Blue Label instead of Yellow Label when post molding decorating or other secondary operations are anticipated. Blue Label is also EPA compliant and worker safe. PAINTABLE! The Ultra 4 group of mold releases is engineered for molding plastics that exhibit solvent sensitivity. Ultra 4 \'s are a highly sophisticated family of solventless mold releases. Cycle times are faster and production is more efficient as no time is lost waiting for a solvent to evaporate. Release agent is fast drying with the same time proven and active ingredients found in our other Ultra mold releases. The propellants and active ingredients also support commitment to environmental responsiblity, worker safety, prudent and economically productive manufacturing practices. Use Ultra 4 with complete confidence on wax, plastics or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable by aerosol standards Nearly odorless No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 12 ounces per can Solvent-less (contains dimethyl-ether) Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - BLUE LABEL ULTRA 4 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Blue Label Ultra 4 Mold Release - Quantity of 1-3 Cases 86.40/cs Order Qty. 0 1 case 2 cases 3 cases Blue Label Ultra 4 Mold Release - Quantity of 4-24 Cases 82.20/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Blue Label Ultra 4 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 10.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Blue Label Ultra 4 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[32]=new Array(33,"HTML/PD-Urethane-Parfilm-4.php","","Price-Driscoll Urethane Parfilm Ultra 4 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, urethane parfilm ultra, urethane parafilm, ultra 4 mold release","West Coast Plastics offers Price-Driscoll Urethane Parfilm Ultra 4 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Urethane Parfilm Ultra 4 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Urethane Parfilm Ultra 4 Mold Release forms an ultra-thin coating that allows excellent reproduction of your urethane castings. This chemically inert release agent is formulated specifically for urethanes and is heat stable to 575&deg;F. The Ultra 4 group of mold releases is engineered for molding plastics that exhibit solvent sensitivity. Ultra 4 \'s are a highly sophisticated family of solventless mold releases. Cycle times are faster and production is more efficient as no time is lost waiting for a solvent to evaporate. Release agent is fast drying with the same time proven and active ingredients found in our other Ultra mold releases. The propellants and active ingredients also support commitment to environmental responsiblity, worker safety, prudent and economically productive manufacturing practices. Use Ultra 4 with complete confidence on wax, plastics or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable by aerosol standards Nearly odorless No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 12 ounces per can Solvent-less (contains dimethyl-ether) Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - URETHANE PARFILM ULTRA 4 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Urethane Parfilm Ultra 4 Mold Release - Quantity of 1-3 Cases 86.40/cs Order Qty. 0 1 case 2 cases 3 cases Urethane Parfilm Ultra 4 Mold Release - Quantity of 4-24 Cases 82.20/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Urethane Parfilm Ultra 4 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 10.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Urethane Parfilm Ultra 4 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[33]=new Array(34,"HTML/PD-Blue-Label-3.php","","Price-Driscoll Bomb Lube Blue Label Ultra 3 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, blue label ultra, bomb lube blue, ultra 3 mold release","West Coast Plastics offers Price-Driscoll Bomb Lube Blue Label Ultra 3 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Bomb Lube Blue Label Ultra 3 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Bomb Lube Blue Label Ultra 3 Mold Release is a blend of modified siloxanes formulated for a wide variety of plastics. It is an ambivalent mold release in that it affords excellent release characteristics while allowing the adhesion of post molding decoration. Use Blue Label instead of Yellow Label when post molding decorating or other secondary operations are anticipated. Blue Label is also EPA compliant and worker safe. PAINTABLE! The Ultra 3 family of mold release incorporates a non-flammable solvent (nPB) suggested by the Significant New Alternatives Products (SNAP) sector of the EPA. Ultra 3 mold releases are products that represent the fine balance of commitment to environmental responsibility, worker safety, prudent manufacturing practices and sound business economy. Use Ultra 3 on steel molds, but not on sensitive wax, plastic or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable Non-VOC No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 18 ounces per can nPB Solvent Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - BLUE LABEL ULTRA 3 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Blue Label Ultra 3 Mold Release - Quantity of 1-3 Cases 113.40/cs Order Qty. 0 1 case 2 cases 3 cases Blue Label Ultra 3 Mold Release - Quantity of 4-24 Cases 109.80/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Blue Label Ultra 3 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 12.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Blue Label Ultra 3 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[34]=new Array(35,"HTML/PD-Yellow-Label-3.php","","Price-Driscoll Bomb Lube Yellow Label Ultra 3 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Yellow Label ultra, Bomb lube Yellow, ultra 3 mold release","West Coast Plastics offers Price-Driscoll Bomb Lube Yellow Label Ultra 3 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Bomb Lube Yellow Label Ultra 3 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Bomb Lube Yellow Label Ultra 3 Mold Release is a synergistic blend of highly efficient release agents. It can be used where a specific formulation is not needed or desired. Yellow Label is widely accepted in the jewelry and lapidary trades and is also the best release for freeing wax castings in precision investment castings. It is also an excellent lubricant for all metal to elastomeric surfaces. Yellow Label complies with the latest EPA regulations, is safe in the work place and works to increase productivity and profits. Buy and use Yellow Label with complete confidence. The Ultra 3 family of mold release incorporates a non-flammable solvent (nPB) suggested by the Significant New Alternatives Products (SNAP) sector of the EPA. Ultra 3 mold releases are products that represent the fine balance of commitment to environmental responsibility, worker safety, prudent manufacturing practices and sound business economy. Use Ultra 3 on steel molds, but not on sensitive wax, plastic or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable Non-VOC No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 18 ounces per can nPB Solvent Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - YELLOW LABEL ULTRA 3 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Yellow Label Ultra 3 Mold Release - Quantity of 1-3 Cases 113.40/cs Order Qty. 0 1 case 2 cases 3 cases Yellow Label Ultra 3 Mold Release - Quantity of 4-24 Cases 109.80/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Yellow Label Ultra 3 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 12.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Yellow Label Ultra 3 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[35]=new Array(36,"HTML/PD-Yellow-Label-4.php","","Price-Driscoll Bomb Lube Yellow Label Ultra 4 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, yellow label ultra, bomb lube yellow, ultra 4 mold release","West Coast Plastics offers Price-Driscoll Bomb Lube Yellow Label Ultra 4 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Bomb Lube Yellow Label Ultra 4 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Yellow Label Ultra 4 Mold Release is a synergistic blend of highly efficient release agents. It can be used where a specific formulation is not needed or desired. Yellow Label is widely accepted in the jewelry and lapidary trades and is also the best release for freeing wax castings in precision investment castings. It is also an excellent lubricant for all metal to elastomeric surfaces. Yellow Label complies with the latest EPA regulations, is safe in the work place and works to increase productivity and profits. Buy and use Yellow Label with complete confidence. The Ultra 4 group of mold releases is engineered for molding plastics that exhibit solvent sensitivity. Ultra 4 \'s are a highly sophisticated family of solventless mold releases. Cycle times are faster and production is more efficient as no time is lost waiting for a solvent to evaporate. Release agent is fast drying with the same time proven and active ingredients found in our other Ultra mold releases. The propellants and active ingredients also support commitment to environmental responsiblity, worker safety, prudent and economically productive manufacturing practices. Use Ultra 4 with complete confidence on wax, plastics or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable by aerosol standards Nearly odorless No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 12 ounces per can Solvent-less (contains dimethyl-ether) Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - YELLOW LABEL ULTRA 4 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Yellow Label Ultra 4 Mold Release - Quantity of 1-3 Cases 86.40/cs Order Qty. 0 1 case 2 cases 3 cases Yellow Label Ultra 4 Mold Release - Quantity of 4-24 Cases 82.20/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Yellow Label Ultra 4 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 10.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Yellow Label Ultra 4 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",19);arrFiles[36]=new Array(37,"HTML/PD-Anti-Stick-4.php","","Price-Driscoll Anti-Stick Ultra 4 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, anti-stick ultra, ultra 4 mold release, food grade mold spray","West Coast Plastics offers Price-Driscoll Anti-stick Ultra 4 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Anti-Stick Ultra 4 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Anti-Stick Ultra 4 Food Grade Mold Release is the best mold release to use when molding or fabricating materials that come into primary or secondary contact with edibles. The active release agents in Anti-Stick comply with F.D.A. regulations and the propellants and diluents are not considered food additives as they evaporate almost immediately. FDA Approved . The Ultra 4 group of mold releases is engineered for molding plastics that exhibit solvent sensitivity. Ultra 4 \'s are a highly sophisticated family of solventless mold releases. Cycle times are faster and production is more efficient as no time is lost waiting for a solvent to evaporate. Release agent is fast drying with the same time proven and active ingredients found in our other Ultra mold releases. The propellants and active ingredients also support commitment to environmental responsiblity, worker safety, prudent and economically productive manufacturing practices. Use Ultra 4 with complete confidence on wax, plastics or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable by aerosol standards Nearly odorless No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 12 ounces per can Solvent-less (contains dimethyl-ether) Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - ANTI-STICK ULTRA 4 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Anti-Stick Ultra 4 Mold Release - Quantity of 1-3 Cases 86.40/cs Order Qty. 0 1 case 2 cases 3 cases Anti-Stick Ultra 4 Mold Release - Quantity of 4-24 Cases 82.20/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Anti-Stick Ultra 4 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 10.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Anti-Stick Ultra 4 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[37]=new Array(38,"HTML/PD-Polypropylene-4.php","","Price-Driscoll Polypropylene Ultra 4 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Polypropylene ultra, ultra 4 mold release","West Coast Plastics offers Price-Driscoll Polypropylene Ultra 4 Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Polypropylene Ultra 4 Plastics Industry Standard - Aerosol Mold Release Agent Price-Driscoll Polypropylene Ultra 4 Mold Release is specially formulated for polypropylene to give the maximum number of releases (up to 45) per application without resin degradation. It will not carbonize and is heat stable to temperatures above the degradation temperature of the resin. Available only in the Ultra 4 formulation. . The Ultra 4 group of mold releases is engineered for molding plastics that exhibit solvent sensitivity. Ultra 4 \'s are a highly sophisticated family of solventless mold releases. Cycle times are faster and production is more efficient as no time is lost waiting for a solvent to evaporate. Release agent is fast drying with the same time proven and active ingredients found in our other Ultra mold releases. The propellants and active ingredients also support commitment to environmental responsiblity, worker safety, prudent and economically productive manufacturing practices. Use Ultra 4 with complete confidence on wax, plastics or rubber molds. FEATURES &amp; BENEFITS EPA Compliant Non-flammable by aerosol standards Nearly odorless No Class I (CFC \'s) or Class II (HCFC \'s) ozone depleting substances Net weight: 12 ounces per can Solvent-less (contains dimethyl-ether) Level 1 Aerosol for easy storage Field proven active ingredients Ultra-Thin Homogeneous Paintable Non-Oily, Non-Melting &amp; No Build-Up ORDERING INFORMATION - POLYPROPYLENE ULTRA 4 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). There is a price break for orders of 4 cases or more. To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Polypropylene Ultra 4 Mold Release - Quantity of 1-3 Cases 86.40/cs Order Qty. 0 1 case 2 cases 3 cases Polypropylene Ultra 4 Mold Release - Quantity of 4-24 Cases 82.20/cs Order Qty. 0 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases 11 cases 12 cases 13 cases 14 cases 15 cases 16 cases 17 cases 18 cases 19 cases 20 cases 21 cases 22 cases 23 cases 24 cases Polypropylene Ultra 4 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 10.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Polypropylene Ultra 4 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",18);arrFiles[38]=new Array(39,"HTML/PD-Eject-it-E20-6.php","","Price-Driscoll Eject-It E20-6 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It E20-6, food grade silicone, silicone spray","West Coast Plastics offers Price-Driscoll Eject-It E20-6 All Purpose Food Grade Silicone Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it E20-6 All Purpose Food Grade Silicone 6% Solution Price-Driscoll Eject-it E20-6 All Purpose Food Grade Silicone Mold Release is the same as E20-3 except with 6% active solution. E20-6 is a universal, silicone type release with 6% active solution for injection, RIM, compression, extrusion, casting, lay-up, and forming. Works well for ABS resins, acetal, melamines, methacrylate, nylon, PE, polycarbonate, polystyrene, PP, polyurethane, as well as natural and synthetic rubbers. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT E20-6 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It E20-6 Mold Release - By the Case (12 cans/Case) 55.80/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It E20-6 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 6.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It E20-6 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",16);arrFiles[39]=new Array(40,"HTML/PD-Eject-it-E20-3.php","","Price-Driscoll Eject-It E20-3 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It E20-3, food grade silicone, silicone spray","West Coast Plastics offers Price-Driscoll Eject-It E20-3 All Purpose Food Grade Silicone Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it E20-3 All Purpose Food Grade Silicone 3% Solution Price-Driscoll Eject-it E20-3 All Purpose Food Grade Silicone Mold Release is a universal, silicone type release with 3% active solution for injection, RIM, compression, extrusion, casting, lay-up, and forming. Works well for ABS resins, acetal, melamines, methacrylate, nylon, PE, polycarbonate, polystyrene, PP, polyurethane, as well as natural and synthetic rubbers. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT E20-3 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It E20-3 Mold Release - By the Case (12 cans/Case) 55.20/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It E20-3 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 6.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It E20-3 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",16);arrFiles[40]=new Array(41,"HTML/PD-Eject-it-E23.php","","Price-Driscoll Eject-It E23 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It E23, paintable thermoset","West Coast Plastics offers Price-Driscoll Eject-It E23 Paintable Thermoset Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it E23 Paintable Thermoset Release Price-Driscoll Eject-it E23 Paintable Thermoset Mold Release contains silicone releases and lubricants blended for good release on plastics, rubbers, and reinforced composites while being paintable. Applications include: epoxies (EP), polyurethanes (PUR), and polyesters. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT E23 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It E23 Mold Release - By the Case (12 cans/Case) 72.60/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It E23 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 8.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It E23 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",16);arrFiles[41]=new Array(42,"HTML/PD-Eject-it-24.php","","Price-Driscoll Eject-It 24 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It 24, paintable dry slip","West Coast Plastics offers Price-Driscoll Eject-It 24 Paintable Dry Slip Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it 24 Paintable Dry Slip Release Price-Driscoll Eject-it 24 Paintable Dry Slip Mold Release contains a proven formula of non-oily release agent and carrier for thermoset materials primarily. #E24 can be used for: epoxy, melamine, methacrylate, phenolic, polyester and polyurethane. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT 24 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It 24 Mold Release - By the Case (12 cans/Case) 38.55/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It 24 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 5.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It 24 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[42]=new Array(43,"HTML/PD-Eject-it-E21.php","","Price-Driscoll Eject-It E21 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It E21, paintable silicone, silicone spray","West Coast Plastics offers Price-Driscoll Eject-It E21 All Purpose Paintable Silicone Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it E21 All Purpose Paintable Silicone Price-Driscoll Eject-it E21 All Purpose Paintable Silicone Mold Release an organo-modified silicone release agent that allows post molding decoration on thermoformed or cast plastics, rubbers, and reinforced engineering resins. Applications include: ABS resins, acrylic, melamine, methacrylate, nylon, PI, phenolic, polycarbonate, PP and PS. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT E21 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It E21 Mold Release - By the Case (12 cans/Case) 59.16/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It E21 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 7.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It E21 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",16);arrFiles[43]=new Array(44,"HTML/PD-Eject-it-E26.php","","Price-Driscoll Eject-It E26 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It E26, mineral oil","West Coast Plastics offers Price-Driscoll Eject-It E26 Mineral Oil Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it E26 Mineral Oil Mold Release Price-Driscoll Eject-it E26 Mineral Oil Mold Release extra clean &amp; pure non-silicone paintable. A refined, paintable &amp; silicone-free, release formula of crystal clear white oil and carrier. #E26 is compatible for molding medical or food contact materials. #26 works well with many thermoplastics, most thermosets, rubber and patterns for RTV silicone rubber molds. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT E26 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It E26 Mold Release - By the Case (12 cans/Case) 60.24/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It E26 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 7.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It E26 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",16);arrFiles[44]=new Array(45,"HTML/PD-Eject-it-E25.php","","Price-Driscoll Eject-It E25 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It E25, food grade spray, paintable mold release","West Coast Plastics offers Price-Driscoll Eject-It E25 Paintable Food Grade Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it E25 Paintable Food Grade Release Price-Driscoll Eject-it E25 Paintable Food Grade Mold Release this formula is a natural Lecithin with carriers for molding thermoplastics and some thermosets. Broad spectrum material applications include: ABS, acetal, epoxy, melamine, phenolic, polyester, polyethylene, polycarbonate, nylon, polyvinyl, polystyrene, polypropylene, polyurethane, and rubbers. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT E25 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It E25 Mold Release - By the Case (12 cans/Case) 56.88/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It E25 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 6.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It E25 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",16);arrFiles[45]=new Array(46,"HTML/PD-Eject-it-E28.php","","Price-Driscoll Eject-It E28 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It E28, fluorofilm dry coat release","West Coast Plastics offers Price-Driscoll Eject-It E28 Fluorofilm Dry Coat Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it E28 Fluorofilm Dry Coat Release Price-Driscoll Eject-it E28 Fluorofilm Dry Coat Mold Release a high performance release compatible to thermoplastic and thermoset resins as well as silicone rubbers. Allows post molding operations like welding and painting straight from the mold. The finely tune propellant and atomization system produces a uniform micro-platlet film on the mold. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT E28 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It E28 Mold Release - By the Case (12 cans/Case) 74.52/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It E28 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 8.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It E28 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",16);arrFiles[46]=new Array(47,"HTML/PD-Eject-it-32.php","","Price-Driscoll Eject-It 32 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It 32, PMR Broad Spectrum U.L. Release","West Coast Plastics offers Price-Driscoll Eject-It 32 PMR Broad Spectrum U.L. Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it 32 PMR Broad Spectrum U. L. Release Price-Driscoll Eject-it 32 PMR Broad Spectrum U.L. Mold Release A UL Recognized, universal, organo-silicone release that allows post molding operations on Polystyrene, thermoformed and cast plastics, rubbers, and reinforced engineering resins. #32 permits after mold painting, metalizing, welding, stamping and gluing. It produces a thin barrier film of modified silicone that provides long lasting release action. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT 32 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It 32 Mold Release - By the Case (12 cans/Case) 70.56/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It 32 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 7.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It 32 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",16);arrFiles[47]=new Array(48,"HTML/PD-Eject-it-31.php","","Price-Driscoll Eject-It 31 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It 31, U.L. Paintable spray, Polycarbonate release","West Coast Plastics offers Price-Driscoll Eject-It 31 U.L. Paintable Polycarbonate Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it 31 U. L. Paintable Polycarbonate Release Price-Driscoll Eject-it 31 U.L. Paintable Polycarbonate Mold Release A UL Recognized Polycarbonate compatible release that allows post mold painting, welding, printing, and embossing. #31 avoids the blemishing and haze crazing possible from conventional silicone releases. It produces a thin barrier film of slip agent that provides long lasting release action. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT 31 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It 31 Mold Release - By the Case (12 cans/Case) 73.08/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It 31 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 8.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It 31 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",16);arrFiles[48]=new Array(49,"HTML/PD-Eject-it-33.php","","Price-Driscoll Eject-It 33 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It 33, petrolease","West Coast Plastics offers Price-Driscoll Eject-It 33 Petrolease Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it 33 Petrolease Price-Driscoll Eject-it 33 Petrolease Mold Release Non-Silicone #33 works for rubber molds, molded rubber and releases almost everything from anything. PETROLEASE has extensive applications for prototyping and pattern work. #33 also works well for RTV and tin or platinum curing elastomers. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT 33 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It 33 Mold Release - By the Case (12 cans/Case) 79.20/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It 33 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 8.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It 33 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[49]=new Array(50,"HTML/PD-Eject-it-34.php","","Price-Driscoll Eject-It 34 Mold Release - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Eject-It, Eject-It 34, carnauba wax release","West Coast Plastics offers Price-Driscoll Eject-It 34 Carnauba Wax Mold Release. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Release - Eject-it 34 Carnauba Wax Release Price-Driscoll Eject-it 34 Carnauba Wax Mold Release is a non-silicone, synthetic wax-based release for rubber molding, casting and encapsulating with epoxies, phenolics and molded thermoset plastics. It is a paintable alternative to silicone and fluoropolymer type mold releases. Eject-It #34 Wax Release contains no silicones or oils, no Class I or Class II ozone depleting substances, is EPA compliant and is non-flammable. It is paintable, no need to wash or clean prior to post-molding operations, with fewer rejects from piece marking as it contains no silicones or oils. Heavy duty, non-melting with no build-up for less down-time and increased productivity and quality. From the manufacturer of the first commercially available mold release, Price-Driscoll is the new line of Eject-It Mold Releases , part of their new Spectrum Series products. Here \'s a truly broad-spectrum release line with easy choice and price. From #E20 to #34 you can choose thermoplastics or thermosets, traditional silicone, paintables, food grade, UL qualified. Effective performance -- sufficient contents for one light application and many releases. Effectively specific -- they work where we say they work. Cost effective -- competitive with products of similar fill weights and components. ORDERING INFORMATION - EJECT-IT 34 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Eject-It 34 Mold Release - By the Case (12 cans/Case) 49.92/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Eject-It 34 Mold Release - Quantity of 2-11 Individual Cans (2 can min order) 6.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Eject-It 34 Mold Release MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold releases usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold release aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",16);arrFiles[50]=new Array(51,"HTML/PD-Clean-It-10.php","","Price-Driscoll Clean-It 10 Mold Cleaner - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Clean-It, Clean-It 10, mold cleaner","West Coast Plastics offers Price-Driscoll Clean-It 10 Mold Cleaner. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Cleaner - Clean-It 10 Heavy Duty All Purpose Price-Driscoll Clean-It #10 Heavy Duty All Purpose Mold Cleaner is a more powerful residue resin remover for epoxy and urethane thermosets. #10 works well on warm molds and assists in the removal of excess release agent, grease, oil, and fingerprints on tooling and machines. Price-Driscoll Clean-It Mold Cleaners are formulated for use in the plastics industry for cleaning molds and also for cleaning tooling and equipment. Some of the cleaner-degreaser formulas are used in the auto industry and machine shops. Biodegradable formulas are available for the environmentally conscious user. ORDERING INFORMATION - CLEAN-IT 10 Price-Driscoll Mold Cleaners can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Clean-It 10 Mold Cleaner - By the Case (12 cans/Case) 68.40/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Clean-It 10 Mold Cleaner - Quantity of 2-11 Individual Cans (2 can min order) 7.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Clean-It 10 Mold Cleaner MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold cleaners usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold cleaner aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[51]=new Array(52,"HTML/PD-Clean-It-11.php","","Price-Driscoll Clean-It 11 Mold Cleaner - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Clean-It, Clean-It 10, mold cleaner","West Coast Plastics offers Price-Driscoll Clean-It 10 Mold Cleaner. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Cleaner - Clean-It 11 Super Citri-Scent Price-Driscoll Clean-It #11 Super Citri-Scent Mold Cleaner is an easy to use cleaner for a variety of contaminants. #11 works well on warm dirty molds, tooling and machines to remove excess release agent, grease, oil, and fingerprints. #11 is biodegradable and fresh smelling. Price-Driscoll Clean-It Mold Cleaners are formulated for use in the plastics industry for cleaning molds and also for cleaning tooling and equipment. Some of the cleaner-degreaser formulas are used in the auto industry and machine shops. Biodegradable formulas are available for the environmentally conscious user. ORDERING INFORMATION - CLEAN-IT 11 Price-Driscoll Mold Cleaners can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Clean-It 11 Mold Cleaner - By the Case (12 cans/Case) 79.20/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Clean-It 11 Mold Cleaner - Quantity of 2-11 Individual Cans (2 can min order) 9.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Clean-It 11 Mold Cleaner MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold cleaners usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold cleaner aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[52]=new Array(53,"HTML/PD-Clean-It-13.php","","Price-Driscoll Clean-It 13 Mold Cleaner - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Clean-It, Clean-It 13, Resin Invader mold cleaner","West Coast Plastics offers Price-Driscoll Clean-It 13 Mold Cleaner. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Cleaner - Clean-It 13 Resin Invader Price-Driscoll Clean-It #13 Resin Invader Mold Cleaner is a high power remover for residue thermoset resin. #13 can be used on warm to hot molds and tooling. #13 penetrates setting residues, greases, oil char, and many other resistant contaminants. . Price-Driscoll Clean-It Mold Cleaners are formulated for use in the plastics industry for cleaning molds and also for cleaning tooling and equipment. Some of the cleaner-degreaser formulas are used in the auto industry and machine shops. Biodegradable formulas are available for the environmentally conscious user. ORDERING INFORMATION - CLEAN-IT 13 Price-Driscoll Mold Cleaners can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Clean-It 13 Mold Cleaner - By the Case (12 cans/Case) 64.80/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Clean-It 13 Mold Cleaner - Quantity of 2-11 Individual Cans (2 can min order) 7.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Clean-It 13 Mold Cleaner MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold cleaners usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold cleaner aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[53]=new Array(54,"HTML/PD-Clean-It-14.php","","Price-Driscoll Clean-It 14 Mold Cleaner - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Clean-It, Clean-It 14, mold cleaner","West Coast Plastics offers Price-Driscoll Clean-It 14 Mold Cleaner. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Cleaner - Clean-It 14 Non-Flammable for Hot Molds Price-Driscoll Clean-It 14 Non-Flammable for Hot Molds Mold Cleaner is a strong non-flammable blend of agents for &ldquo;on-line&rdquo; cleaning of hot molds. #14 is designed to remove excess release agent, grime, oil, and contaminants that affect molded part surface appearance and finish. .Price-Driscoll Clean-It Mold Cleaners are formulated for use in the plastics industry for cleaning molds and also for cleaning tooling and equipment. Some of the cleaner-degreaser formulas are used in the auto industry and machine shops. Biodegradable formulas are available for the environmentally conscious user. ORDERING INFORMATION - CLEAN-IT 14 Price-Driscoll Mold Cleaners can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Clean-It 14 Mold Cleaner - By the Case (12 cans/Case) 45.36/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Clean-It 14 Mold Cleaner - Quantity of 2-11 Individual Cans (2 can min order) 5.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Clean-It 14 Mold Cleaner MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold cleaners usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold cleaner aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[54]=new Array(55,"HTML/PD-Clean-It-12.php","","Price-Driscoll Clean-It 12 Mold Cleaner - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Clean-It, Clean-It 12, Citri-Quick mold cleaner","West Coast Plastics offers Price-Driscoll Clean-It 12 Mold CleanerFrom the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Cleaner - Clean-It 12 Citri-Quick Price-Driscoll Clean-It #12 Citri-Quick Mold Cleaner is a fast acting cleaner for a wide range of stubborn contaminants. #12 works well on cool dirty molds, tooling, and machines to assist the removal of excess release agent, grease, oil and fingerprints. #12 is quick drying with a pleasant, fresh scent. Price-Driscoll Clean-It Mold Cleaners are formulated for use in the plastics industry for cleaning molds and also for cleaning tooling and equipment. Some of the cleaner-degreaser formulas are used in the auto industry and machine shops. Biodegradable formulas are available for the environmentally conscious user. ORDERING INFORMATION - CLEAN-IT 12 Price-Driscoll Mold Cleaners can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Clean-It 12 Mold Cleaner - By the Case (12 cans/Case) 68.64/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Clean-It 12 Mold Cleaner - Quantity of 2-11 Individual Cans (2 can min order) 7.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Clean-It 12 Mold Cleaner MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold cleaners usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold cleaner aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[55]=new Array(56,"HTML/PD-Clean-It-16.php","","Price-Driscoll Clean-It 16 Mold Cleaner - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Clean-It, Clean-It 16, Mold Brite Force, mold cleaner","West Coast Plastics offers Price-Driscoll Clean-It 16 Mold Cleaner. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Cleaner - Clean-It 16 Mold Brite Force 1 Price-Driscoll Clean-It #16 Mold Brite Force 1 Mold Cleaner A high purity cleaner for a wide range of stubborn contaminants. #16 works well to clean molds, tooling and machinery making products with incidental food &amp; medical end use. Clean-It #16 is moderately fast drying with soak time to dissolve release agent, ejector pin greases and oily contaminants. . Price-Driscoll Clean-It Mold Cleaners are formulated for use in the plastics industry for cleaning molds and also for cleaning tooling and equipment. Some of the cleaner-degreaser formulas are used in the auto industry and machine shops. Biodegradable formulas are available for the environmentally conscious user. ORDERING INFORMATION - CLEAN-IT 16 Price-Driscoll Mold Cleaners can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Clean-It 16 Mold Cleaner - By the Case (12 cans/Case) 46.80/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Clean-It 16 Mold Cleaner - Quantity of 2-11 Individual Cans (2 can min order) 5.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Clean-It 16 Mold Cleaner MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold cleaners usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold cleaner aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[56]=new Array(57,"HTML/PD-Clean-It-15.php","","Price-Driscoll Clean-It 15 Mold Cleaner - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, mold release, mold spray, Clean-It, Clean-It 15, AHAH Mold cleaner","West Coast Plastics offers Price-Driscoll Clean-It 15 Mold Cleaner. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Mold Cleaner - Clean-It 15 A-HAH (Always Have At Hand) Economical Non-Flammable Cleaner/Degreaser Price-Driscoll Clean-It 15 A-HAH Mold Cleaner is an economical &ldquo;always have at hand&rdquo; type cleaner for numerous shop jobs. Use #15 for &ldquo;pre-run&rdquo; mold touch-ups and &ldquo;post-run&rdquo; mold cleaning followed by Price-Driscoll Rust Inhibitor (see below). #15 is a tireless worker - on the job - all the time. .Price-Driscoll Clean-It Mold Cleaners are formulated for use in the plastics industry for cleaning molds and also for cleaning tooling and equipment. Some of the cleaner-degreaser formulas are used in the auto industry and machine shops. Biodegradable formulas are available for the environmentally conscious user. ORDERING INFORMATION - CLEAN-IT 15 Price-Driscoll Mold Cleaners can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Clean-It 15 Mold Cleaner - By the Case (12 cans/Case) 57.24/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Clean-It 15 Mold Cleaner - Quantity of 2-11 Individual Cans (2 can min order) 6.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Clean-It 15 Mold Cleaner MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll mold cleaners usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All mold cleaner aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[57]=new Array(58,"HTML/PD-Protect-It-60.php","","Price-Driscoll Protect-It 60 Anti-Rust - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, Anti-Rust, Protect-It, Protect-It 60, mold spray","West Coast Plastics offers Price-Driscoll Protect-It 60 Anti-Rust. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Anti-Rust Products - Protect-It 60 Mold Armor - Maintenance Products that Protect Molds, Dies &amp; Other Metals Price-Driscoll Protect-It 60 Mold Armor Anti-Rust is a triple component formula protection from fingerprint, condensate and atmospheric corrosion on costly mold, die and tooling metals. ProTect-It #60 is an all-metal corrosion inhibitor that provides long term protection with a passivating barrier film. The non-silicone coating dissipates easily during molding start-up. One light coat will protect overnight or for weeks. Two light coats are recommended for more than two-year protection. Fingerprint neutralization and moisture displacement are built-in mechanisms. ORDERING INFORMATION - PROTECT-IT 60 Price-Driscoll Mold Releases can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Protect-It 60 Anti-Rust - By the Case (12 cans/Case) 43.08/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Protect-It 60 Anti-Rust - Quantity of 2-11 Individual Cans (2 can min order) 5.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Protect-It 60 Anti-Rust MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll anti-rust products usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All aerosol products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[58]=new Array(59,"HTML/PD-Rust-Inhibitor-Spray.php","","Price-Driscoll Rust Inhibitor Spray Anti-Rust Products - Equipment from West Coast Plastics","West Coast Plastics, Price-Driscoll, anti-rust, rust inhibitor, MP101, mold spray","West Coast Plastics offers Price-Driscoll Rust Inhibitor Spray Anti-Rust Products. From the manufacturer of the first commercially available mold release, this line features specific formulations for each major type of plastics.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Price-Driscoll Anti-Rust Products - Rust Inhibitor Spray Maintenance Products that Protect Molds, Dies &amp; Other Metals Price-Driscoll MP101 Rust Inhibitor Spray Anti-Rust Product is a corrosion inhibitor suitable for use on all metals. As long as this film remains unbroken, Rust Inhibitor will prevent corrosion. This film has lubricity and need not be removed prior to mold start-up. The first few shots will purge the film from the polished surfaces. Rust Inhibitor Spray has many uses as a corrosion preventer. Use it with confidence for plastic molding dies, investment casting dies, all tool room equipment, freeing frozen fasteners, rubber molding dies, precision instruments, battery terminals and other metal equipment. ORDERING INFORMATION - Rust Inhibitor Spray Price-Driscoll Anti-Rust Products can be ordered by the case (12 cans/case) or by the can (2 can minimum order). To order, select the quantity you need and hit the Add to Cart button. Description Price Order Quantity Rust Inhibitor Spray Anti-Rust Products - By the Case (12 cans/Case) 105.00/cs Order Qty. 0 1 case 2 cases 3 cases 4 cases 5 cases 6 cases 7 cases 8 cases 9 cases 10 cases Rust Inhibitor Spray Anti-Rust Products - Quantity of 2-11 Individual Cans (2 can min order) 11.00/can Order Qty. 0 2 cans 3 cans 4 cans 5 cans 6 cans 7 cans 8 cans 9 cans 10 cans 11 cans Rust Inhibitor Spray Anti-Rust MSDS (Material Safety Data Sheet) N/C Include MSDS Price-Driscoll Anti-Rust Products usually ship in 1-2 days, FOB: Culver City, CA. NOTE: All Anti-Rust products must ship by UPS Ground. Please select that method when you checkout. This page last modified on 3/28/2011 Untitled Page Mold Release Home Page | Sample Can Request | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! For Watlow Heaters, Temperature Controls, Thermocouples and More, see our Watlow-Distributor.com website! ",15);arrFiles[59]=new Array(60,"HTML/MTS-R-Analog.php","","West Coast Plastics - MTS Temposonics R-Series Transducers","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Linear Transducers R Series - Rod &amp; Profile Style Position Sensors - Analog Output MTS Temposonics R-Series Model RP Profile Style Sensor (top) and Model RH Hyrdraulic Rod Style Sensor (bottom). MTS Temposonics R-Series Model RF Flex Style Sensor. The Temposonics R Series Linear Transducers are your solution when you need smart sensor capability for faster, higher precision, more reliable data processing and communication. By preprocessing sensor data in the sensor, your machine controller can reduce processing overhead and carry out other functions. Though the Temposonics R Series is at least four times faster than the other proven lines of Temposonics sensors, it&rsquo;s also more precise: Resolution of 2 microns (0.00008 inch) at 10,000 measurements per second is standard; exceptional non-linearity of 0.02% uncorrected; and hysteresis of 0.00015 inches, which is the best in the industry. Dual simultaneous analog outputs are offered as standard (i.e. one displacement &amp; one velocity output using one magnet; or two identical displacement outputs using two magnets). R series sensors provide direct analog outputs, both voltage &amp; current that allow 100% adjustment of zero and span setpoints. Since the outputs are direct, no signal conditioning electronics are needed when interfacing with controllers or meters. Three application housings are available: rod-style (Model RH), flex-style (Model RF) and profile-style (Model RP). With RH sensors, the sensor cartridge can be quickly replaced in the field without removing the application housing. The changeover is done in one minute with no draining or de-pressurizing of the hydraulic cylinder. For linear measurement along an arc, the Temposonics RF is flexible to an 8 inch minimum bend radius arc and comes in stroke lengths up to 10 meters SPECIFICATION SHEET (pdf format) Specifications Measured Variables: Displacement, speed (magnitude) or velocity (with direction) for single to dual magnets Resolution: Position Measurement: 16 bit; 0.0015% (minimum 1 &micro;m) Speed measurement: 0.1 mm/s Non-Linearity: &lt;&plusmn;0.01% of full stroke (minimum &plusmn;50 &micro;m) Repeatability: &lt;&plusmn;0.001% of full scale (minimum &plusmn;2.5 &micro;m) Hysteresis: &lt; 4 &micro;m. Outputs: Voltage: 0 to +10, +10 to 0, -10 to +10, +10 to -10 Vdc Current: 4 to 20 mA, 20 to 4 mA, 0 to 20 mA, 20 to 0 mA Speed Measurement: Range: 0.025 to 10 m/s or 1.0 to 400.0 in/s Deviation: &lt;0.5T Resolution: 0.1mm/s (0.004 in/s) Measuring Range: Profile Style (RP): 2 to 200 in. (50 to 5080 mm) Rod Style (RH): 2 to 300 in. (50 to 7620 mm) Operating Voltage: +24 Vdc (-15 or +20%) Power Consumption: 100 mA typical Operating Temperature: -40 to +75 &deg;C Update Time: 0.5ms up to 1200mm, 1.0 ms up to 2400mm, 2.0 ms up to 4800mm, 5.0 ms up to 7620 mm stroke length. Warranty: 2 Years How to Order Temposonics R Series Transducers When placing an order, build the desired model number using this model number guide (below). Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. A selection of Temposonics R-Series sensor configurations are available to meet the demands of your particular application. If you have any questions about how to apply MTS Temposonics position sensors, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized MTS Temposonics distributor and will be glad to help you design an effective position sensing system to fit your application. R __ __ __ __ __ __ __ __ __ __ 1 __ __ __ __ __ __ __ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1-2. Sensor Model Price RH = Hydraulic Rod Style Sensor Stroke Dependent RP = Profile Style Sensor RF = Flexible Style Sensor 3. Housing Style Temposonics RH or RF only (magnet must be ordered separately): T = US customary threads, raised-face hex, and pressure pipe (RH only) N/C S = US customary threads, flat-faced hex, and pressure pipe (Pressure pipe not included with RF model) N/C M = Metric threads, flat-faced hex, and pressure pipe (Pressure pipe not included with RF model) N/C B = Sensor cartridge only (No application housing/pressure pipe, stroke lengths &#x2264; 72 in.) (RH only) N/C Temposonics RP only (magnet included): V = Captive Sliding Magnet with joint at front (#252184 magnet included) N/C S = Captive Sliding Magnet with joint at top (#252182 magnet included) N/C M = Floating Magnet (#251416-2 magnet included) N/C 4-7. Stroke Length - (must correspond to Stroke Unit of Measurement selected in Item 8) RH Stroke Range = 2-300 inches (50-7620mm) RP Stroke Range = 2-200 inches (50-5080mm) RF Stroke Range = 10-396 inches (255-10060mm) 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 8. Stroke Unit of Measurement ( choose U for inches and tenths or M for millimeters) U = Inches and tenths (Encode in 0.1 inch increments, for example: 0125U = 12.5 in, 1200U = 120 in) M = Millimeters (Encode in 5mm increments, for example: 0120M = 120 mm, 1200M = 1200 mm) 9-11. Connection Type D60 = 6-pin DIN connector, integral, standard N/C R05 = Integral cable 5-foot (2 meters if metric), PVC jacket with pigtail connection (call if longer cable needed) N/C F05 = Integral cable 5-foot (2 meters if metric), PUR C jacket with pigtail connection (call if longer cable needed) 28.00 12. Input Voltage 1 = +24 Vdc (+20%, -15%), standard N/C 13-15. Output Signal (3 or 7 digit code depending on output selected) 1 Output Channel with 1 Magnet V01 = 0 to +10 Vdc N/C V11 = +10 to 0 Vdc N/C V21 = -10 to +10 Vdc N/C V31 = +10 to -10 Vdc N/C A01 = 4 to 20 mA N/C A11 = 20 to 4 mA N/C A21 = 0 to 20 mA N/C A31 = 20 to 0 mA N/C 2 Output Channels with 2 Magnets Output #1 = Magnet #1 Position Output #2 = Magnet #2 Position V02 = 0 to +10 Vdc 0 to +10 Vdc 63.00 V12 = +10 to 0 Vdc +10 to 0 Vdc 63.00 V22 = -10 to +10 Vdc -10 to +10 Vdc 63.00 V32 = +10 to -10 Vdc +10 to -10 Vdc 63.00 A02 = 4 to 20 mA 4 to 20 mA 63.00 A12 = 20 to 4 mA 20 to 4 mA 63.00 A22 = 0 to 20 mA 0 to 20 mA 63.00 A32 = 20 to 0 mA 20 to 0 mA 63.00 2 Output Channels with 1 Magnet (7 digit code, fill in the blanks with the desired maximum speed values as described below) Output #1 = Magnet Position Output #2 = Absolute Speed V01 __ __ __ __ = 0 to +10 Vdc +10 (towards head) ... 0 (at rest) ... +10 (towards tip) Vdc 63.00 V11 __ __ __ __ = +10 to 0 Vdc +10 (towards head) ... 0 (at rest) ... +10 (towards tip) Vdc 63.00 A01 __ __ __ __ = 4 to 20 mA 20 (towards head) ... 4 (at rest) ... 20 (towards tip) mA 63.00 A11 __ __ __ __ = 20 to 4 mA 20 (towards head) ... 4 (at rest) ... 20 (towards tip) mA 63.00 Output #1 = Magnet Postion Output #2 = Speed Plus Direction V41 __ __ __ __ = 0 to +10 Vdc 0 (towards head) ... 5 (at rest) ... +10 (towards tip) Vdc 63.00 V51 __ __ __ __ = +10 to 0 Vdc +10 (towards head) ... 5 (at rest) ... 0 (towards tip) Vdc 63.00 V61 __ __ __ __ = 0 to +10 Vdc -10 (towards head) ... 0 (at rest) ... +10 (towards tip) Vdc 63.00 V71 __ __ __ __ = +10 to 0 Vdc +10 (towards head) ... 0 (at rest) ... -10 (towards tip) Vdc 63.00 V81 __ __ __ __ = -10 to +10 Vdc -10 (towards head) ... 0 (at rest) ... +10 (towards tip) Vdc 63.00 V91 __ __ __ __ = +10 to -!0 Vdc +10 (towards head) ... 0 (at rest) ... - 10 (towards tip) Vdc 63.00 A41 __ __ __ __ = 4 to 20 mA 4 (towards head) ... 12 (at rest) ... 20 (towards tip) mA 63.00 A51 __ __ __ __ = 20 to 4 mA 20 (towards head) ... 12 (at rest) ... 4 (towards tip) mA 63.00 Output #1 = Magnet Position (forward-acting) Output #2 = Magnet Position (reverse-acting) V03 = 0 to +10 Vdc +10 to 0 Vdc N/C 16-19. For Sensor Models with Speed Output, select the desired maximum speed value as shown below 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 For US customary stroke lengths, encode speed for in./s as follows: __ __ __ __ = Speed output max. (fill in remaining 4 blanks with desired max. speed value) Available range for US customary stroke lengths is 1.0 to 400.0 in./s, (0010 ... 4000) Example: For max. speed of 12.0 in./s, and output produced = [-10 (towards head) ... 0 (at rest) ...+10 (towards tip) Volts], Encode: V 6 1 0 1 2 0 or V 8 1 0 1 2 0 For Metric stroke lengths, encode speed for m/s (range 1) or mm/s (range 2) as follows: Speed Range #1, ( 0 __ __ . __) 0 __ __ . __ = Speed output max. (fill in remaining 3 blanks with desired max. speed value) Speed range 1 for metric stroke lengths is 0.1 to 10.0 m/s (0001 ... 0100) Example: For max. speed of 5.5 m/s, and output produced = [+10 (towards head) ... 0 (at rest) ... +10 (towards tip) Volts], Encode: V 6 1 0 0 5 5 Speed Range #2, ( 1 __ __ __) 1 __ __ __ = Speed output max. (fill in remaining 3 blanks with desired max. speed value) Speed range 2 for metric stroke lengths is 25 to 90 mm/s, (1025 ... 1090) Example: For max. speed of 50 mm/s, and output produced = [4 (towards head) ... 12 (at rest) ... 20 (towards tip) mA], Encode: A 4 1 1 0 5 0 Temposonics R-Series Sensors are made-to-order and usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 9/2/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",46);arrFiles[60]=new Array(61,"HTML/PD-Sample-Request.php","","West Coast Plastics - Catalog &amp; Brochure Request Form","","","West Coast Plastics Equipment - WestCoastPlastics.com Price-Driscoll Mold Release - Sample Can Request We will be glad to send you a free sample can of Price-Driscoll Mold Release, Mold Cleaner or Rust Preventer. Please fill out the form below and then click the Submit Request button at the bottom of the page. Name** Company** Address 1** (no PO boxes) Address 2 City, State** Zip/Postal Code** Country Due to shipping costs we can only send sample cans to the USA. Phone Email** ** Required information. Comments Sample Can Requested (only one sample can per request) Epoxy Parfilm Ultra 3 Epoxy Parfilm Ultra 4 Polyester Parfilm Ultra 3 Polyester Parfilm Ultra 4 Urethane Parfilm Ultra 3 Urethane Parfilm Ultra 4 Bomb Lube Blue Label Ultra 3 Bomb Lube Blue Label Ultra 4 Bomb Lube Yellow Label Ultra 3 Bomb Lube Yellow Label Ultra 4 Anti-Stick for Food Processing Ultra 4 Polypropylenes Ultra 4 Eject-It E20-3 Food Grade Silicone 3% Eject-It E20-6 Food Grade Silicone 6% Eject-It E21 All Purpose Paintable Silicone Eject-It E23 Paintable Thermoset Release Eject-It 24 Paintable Dry Slip Release Eject-It E25 Paintable Food Grade Release Eject-It E26 Mineral Oil Release Eject-It E28 Fluorofilm Dry Coat Release Eject-It 31 U.L. Polycarbonate Paintable Release Eject-It 32 PMR Broad Spectrum U.L. Release Eject-It 33 Petrolease Non-Silicone Release Eject-It 34 Carnauba Wax Release Clean-It #10 Heavy Duty All Purpose Cleaner Clean-It #11 Super Citri-Scent Mold Cleaner Clean-It #12 Citri-Quick Mold Cleaner Clean-It #13 Resin Invader Mold Cleaner Clean-It #14 Non-Flammable for Hot Molds Clean-It #15 A-HAH Cleaner/Degreaser Clean-It #16 Mold Brite-Force 1 Mold Cleaner MP101 Rust Inhibitor Spray Protect-It #60 Anti-Rust Coating Spray Please have a sales rep call me Return to WestCoastPlastics.com Home Page ",7);arrFiles[61]=new Array(62,"HTML/MTS-R-Canbus.php","","MTS Temposonics R-Series Canbus Transducers - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Linear Transducers R Series - Rod &amp; Profile Style Position Sensors - Canbus Output MTS Temposonics R-Series Model RP Profile Style Sensor (top) and Model RH Hyrdraulic Rod Style Sensor (bottom). MTS Temposonics R-Series Model RF Flex Style Sensor. The Temposonics R Series Linear Transducers are your solution when you need smart sensor capability for faster, higher precision, more reliable data processing and communication. By preprocessing sensor data in the sensor, your machine controller can reduce processing overhead and carry out other functions. Though the Temposonics R Series is at least four times faster than the other proven lines of Temposonics sensors, it&rsquo;s also more precise: Resolution of 2 microns (0.00008 inch) at 10,000 measurements per second is standard; exceptional non-linearity of 0.01% uncorrected; and hysteresis of 4 microns, which is the best in the industry. Smart Temposonics R Series position sensors with CANbus capability are microprocessor-based and transmit the complete displacement value data directly to a machine controller. CANbus functionality is used for position data, programmable set points, status and velocity. A CANbus (Controller Area Network) network links all system components via an open fieldbus system. CANbus allows you to interface up to or from 64 to 125 devices using a single cable, thus eliminating the need for conventional methods of multiple wire runs. Temposonics R sensors offer modular construction and non-contacting magnetostrictive technology. Two application housings are available: rod-style (Model RH) and profile-style (Model RP). With RH sensors, the sensor cartridge can be quickly replaced in the field without removing the application housing. The changeover is done in one minute with no draining or de-pressurizing of the hydraulic cylinder. SPECIFICATION SHEET (pdf format) Specifications Measured Variable: Displacement, speed / optional: multi-magnet measurements (up to 15 magnet positions simultaneous) Resolution: Up to 2 &micro;m Non-Linearity: &lt;&plusmn;0.01% of full scale (minimum &plusmn; 40 &micro;m) Repeatability: &lt;&plusmn;0.001% of full scale (minimum &plusmn; 2.5 &micro;m) Hysteresis: &lt; 4 &micro;m Outputs: Interface: CAN-Fieldbus system ISO DIS 11898 Data protocol CANopen: CIA standard DS-301 V4.02 encoder profile DS-406 V3.1 CANbasic; CAN 2.0 A Baud rate, kBit/s: 1000, 800, 500, 250, 125, 50, 20 Cable length, m: &lt;25, &lt;50, &lt;100, &lt;250, &lt;500, &lt;1000, &lt;2500 The sensor will be supplied with ordered Baud rate which can be changed by the customer Measuring Range: Profile Style (RP): 2 to 200 in. (50 to 5080 mm) Rod Style (RH): 2 to 300 in. (50 to 7620 mm) Operating Voltage: +24 Vdc, (+20%, -15%) Power Consumption: 100 mA typical Operating Temperature: -40&deg;C to +75&deg;C ( -40&deg;F to +167&deg;F) Update Time: 0.5ms up to 1200mm, 1.0 ms up to 2400mm, 2.0 ms up to 4800mm, 5.0 ms up to 7620 mm stroke length. Warranty: 2 Years How to Order Temposonics R Series Transducers When placing an order, build the desired model number using this model number guide (below). Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. A selection of Temposonics R-Series sensor configurations are available to meet the demands of your particular application. If you have any questions about how to apply MTS Temposonics position sensors, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized MTS Temposonics distributor and will be glad to help you design an effective position sensing system to fit your application. R __ __ __ __ __ __ __ __ __ __ 1 C __ __ __ __ __ __ Z __ __ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1-2. Sensor Model Price RH = Hydraulic Rod Style Sensor Stroke Dependent RP = Profile Style Sensor RF = Flexible Style Sensor 3. Housing Style Temposonics RH or RF only (magnet must be ordered separately): T = US customary threads, raised-face hex, and pressure pipe (RH only) N/C S = US customary threads, flat-faced hex, and pressure pipe (Pressure pipe not included with RF model) N/C M = Metric threads, flat-faced hex, and pressure pipe (Pressure pipe not included with RF model) N/C B = Sensor cartridge only (No application housing/pressure pipe, stroke lengths &#x2264; 72 in.) (RH only) N/C Temposonics RP only (magnet included): V = Captive Sliding Magnet with joint at front (#252184 magnet included) N/C S = Captive Sliding Magnet with joint at top (#252182 magnet included) N/C M = Floating Magnet (#251416-2 magnet included) N/C 4-7. Stroke Length - (must correspond to Stroke Unit of Measurement selected in Item 8) RH Stroke Range = 2-300 inches (50-7620mm) RP Stroke Range = 2-200 inches (50-5080mm) RF Stroke Range = 10-396 inches (255-10060mm) 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 8. Stroke Unit of Measurement ( choose U for inches and tenths or M for millimeters) U = Inches and tenths (Encode in 0.1 inch increments, for example: 0125U = 12.5 in, 1200U = 120 in) M = Millimeters (Encode in 5mm increments, for example: 0120M = 120 mm, 1200M = 1200 mm) 9-11. Connection Type D60 = 6-pin DIN connector, integral, standard N/C D62 = Dual 6-pin DIN, integral 27.00 P05 = Integral cable 5-foot (2 meters if metric) with pigtail termination, standard (call if longer cable needed) N/C 12. Input Voltage 1 = +24 Vdc (+20%, -15%), standard N/C 13. Output Signal C = CANbus output 14 - 16. CANbus Hardware and Protocol Code 101 = Single Magnet N/C 207 = Multi Magnet (enter the number of magnets needed in item 20-22 below) 63.00 304 = CANopen 63.00 17. Baud Rate 1 = 1000 kBd N/C 2 = 500 kBd N/C 3 = 250 kBd N/C 4 = 125 kBd N/C 18. Resolution 1 = 0.0002 in., (0.005 mm) N/C 2 = 0.00008 in., (0.002 mm) N/C 19. Cycle Time 1 = Standard N/C 20 - 22. Number of Magnets (optional - for multi-position measurement only, option 207 in Item 14-16) Z __ __ = Number of Magnets for output C207 (range 02-15) - order additional magnets separately on the MTS Magnets page. Select 2 magnets 3 magnets 4 magnets 5 magnets 6 magnets 7 magnets 8 magnets 9 magnets 10 magnets 11 magnets 12 magnets 13 magnets 14 magnets 15 magnets Temposonics R-Series Sensors are made-to-order and usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 9/2/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",34);arrFiles[62]=new Array(63,"HTML/MTS-R-SSI.php","","MTS Temposonics R-Series SSI Transducers - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Linear Transducers R Series - Rod &amp; Profile Style Position Sensors - SSI Output MTS Temposonics R-Series Model RP Profile Style Sensor (top) and Model RH Hyrdraulic Rod Style Sensor (bottom). MTS Temposonics R-Series Model RF Flex Style Sensor. The Temposonics R Series Linear Transducers are your solution when you need smart sensor capability for faster, higher precision, more reliable data processing and communication. By preprocessing sensor data in the sensor, your machine controller can reduce processing overhead and carry out other functions. Though the Temposonics R Series is at least four times faster than the other proven lines of Temposonics sensors, it&rsquo;s also more precise: Resolution of 2 microns (0.00008 inch) at 10,000 measurements per second is standard; exceptional non-linearity of 0.02% uncorrected; and hysteresis of 0.00015 inches, which is the best in the industry. A widely accepted controller inteface, Serial Synchronous Interface (SSI) is one of the output options on the Temposonics R Series of Sensors. Position data from the sensors is encoded in a 24 to 25 bit binary or Gray Code format and transmitted at very high speed via a synchronous interface. SSI output provides effective synchronization in a closed-loop control system. A clock pulse train from a controller is used to gate out sensor data: one bit at a time. Temposonics R sensors offer modular construction and non-contacting magnetostrictive technology. Two application housings are available: rod-style (Model RH) and profile-style (Model RP). With RH sensors, the sensor cartridge can be quickly replaced in the field without removing the application housing. The changeover is done in one minute with no draining or de-pressurizing of the hydraulic cylinder. For linear measurement along an arc, the Temposonics RF is flexible to an 8 inch minimum bend radius arc and comes in stroke lengths up to 10 meters SPECIFICATION SHEET (pdf format) Specifications Measured Variable: Displacement, displacement different between 2 magnets, velocity Resolution: 1 &micro;m, 2 &micro;m, 5 &micro;m, 10 &micro;m, 20 &micro;m, 50 &micro;m, 100 &micro;m Non-Linearity: &lt;&plusmn;0.01% of full scale (minimum &plusmn;40 &micro;m) Repeatability: &lt;&plusmn;0.001% of full scale (minimum &plusmn;2.5 &micro;m) Hysteresis: &lt; 4 &micro;m, typical 2 &micro;m Output: Interface: Synchronous Serial Interface (SSI) or Differential signal in SSI standard Data format: Binary or gray, optional parity and errorbit Data length: 8 to 32 bit Data speed: 70 kBd to 1 MBd, depending on cable length Measuring Range: Profile Style (RP): 2 to 200 in. (50 to 5080 mm) Rod Style (RH): 2 to 300 in. (50 to 7620 mm) Operating Voltage: +24 Vdc, (+20%, -15%) Power Consumption: 100 mA typical Operating Temperature: -40&deg;F to +167&deg;F (-40&deg;C to +75&deg;C) Update Time: 3.7 to 0.5 kHz length dependent Warranty: 2 Years How to Order Temposonics R Series Transducers When placing an order, build the desired model number using this model number guide (below). Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. A selection of Temposonics R-Series sensor configurations are available to meet the demands of your particular application. If you have any questions about how to apply MTS Temposonics position sensors, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized MTS Temposonics distributor and will be glad to help you design an effective position sensing system to fit your application. R __ __ __ __ __ __ __ __ __ __ 1 S __ __ __ __ __ __ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1-2. Sensor Model Price RH = Hydraulic Rod Style Sensor Stroke Dependent RP = Profile Style Sensor RF = Flexible Style Sensor 3. Housing Style Temposonics RH or RF only (magnet must be ordered separately): T = US customary threads, raised-face hex, and pressure pipe (RH only) N/C S = US customary threads, flat-faced hex, and pressure pipe (Pressure pipe not included with RF model) N/C M = Metric threads, flat-faced hex, and pressure pipe (Pressure pipe not included with RF model) N/C B = Sensor cartridge only (No application housing/pressure pipe, stroke lengths &#x2264; 72 in.) (RH only) N/C Temposonics RP only (magnet included): V = Captive Sliding Magnet with joint at front (#252184 magnet included) N/C S = Captive Sliding Magnet with joint at top (#252182 magnet included) N/C M = Floating Magnet (#251416-2 magnet included) N/C 4-7. Stroke Length - (must correspond to Stroke Unit of Measurement selected in Item 8) RH Stroke Range = 2-300 inches (50-7620mm) RP Stroke Range = 2-200 inches (50-5080mm) RF Stroke Range = 10-396 inches (255-10060mm) 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 8. Stroke Unit of Measurement ( choose U for inches and tenths or M for millimeters) U = Inches and tenths (Encode in 0.1 inch increments, for example: 0125U = 12.5 in, 1200U = 120 in) M = Millimeters (Encode in 5mm increments, for example: 0120M = 120 mm, 1200M = 1200 mm) 9-11. Connection Type D70 = 7-pin DIN connector, integral, standard N/C MS0 = 10-pin MS style, integral 124.00 E05 = Integral standard cable 5-foot (2 meters if metric) with pigtail termination (call if longer cable needed) N/C P05 = Integral high performance cable 5-foot (2 meters if metric) (orange jacket) with pigtail termination (call if longer cable needed) 28.00 F05 = Integral cable 5-foot (2 meters if metric), black polyurethane jacket with pigtail termination (call if longer cable needed) 28.00 12. Input Voltage 1 = +24 Vdc (+20%, -15%), standard N/C 13. Output Signal S = SSI output 14. Data Length: 1 = 25 bits N/C 2 = 24 bits N/C 3 = 26 bits N/C 15. Output Format: B = Binary N/C G = Gray Code N/C 16. Resolution: 1 = 0.0002 in., (0.005 mm) N/C 2 = 0.0004 in., (0.01 mm) N/C 3 = 0.002 in., (0.05 mm) N/C 4 = 0.004 in., (0.1 mm) N/C 5 = 0.0008 in., (0.02 mm) N/C 6 = 0.00008 in., (0.002 mm) N/C 8 = 0.00004 in., (0.001 mm) N/C 17. Performance: 1 = Standard N/C 2 = Skip Filter (2 times) N/C 3 = Skip Filter (4 times) N/C 8= Skip Filter (8 times) N/C 18-19. Scale Orientation: 00 = Forward-acting N/C 01 = Reverse-acting N/C 02 = Forward-acting synchronized N/C 05 = Forward-acting, bit 25 = alarm, bit 26 = parity even N/C 12 = Differential measurment, synchronized (2 magnets) N/C 13 = Velocity, asynchronous N/C Temposonics R-Series Sensors are made-to-order and usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 9/2/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",37);arrFiles[63]=new Array(64,"HTML/MTS-R-DeviceNet.php","","MTS Temposonics R-Series DeviceNet Transducers - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Linear Transducers R Series - Rod &amp; Profile Style Position Sensors - DeviceNet Output MTS Temposonics R-Series Model RP Profile Style Sensor (top) and Model RH Hyrdraulic Rod Style Sensor (bottom). MTS Temposonics R-Series Model RF Flex Style Sensor. The Temposonics R Series Linear Transducers are your solution when you need smart sensor capability for faster, higher precision, more reliable data processing and communication. By preprocessing sensor data in the sensor, your machine controller can reduce processing overhead and carry out other functions. Though the Temposonics R Series is at least four times faster than the other proven lines of Temposonics sensors, it&rsquo;s also more precise: Resolution of 2 microns (0.00008 inch) at 7,500 measurements per second is standard; exceptional non-linearity of 0.02% uncorrected; and hysteresis of 0.00015 inches, which is the best in the industry. Smart Temposonics R Series position sensors with DeviceNet interface expand the functionality of position sensors. DeviceNet is a bus architecture that allows up to 64 nodes to share one data highway, i.e. interface up to 64 sensors using a single cable, thus eliminating the need for conventional methods of multiple wire runs. DeviceNet is a CAN-based (Controller Area Network) network that links all system components via an open bus system. It is a standard for device level communications and provides high speed transmission appropriate for position indication and motion control in industrial applications. Temposonics R sensors offer modular construction and non-contacting magnetostrictive technology. Two application housings are available: rod-style (Model RH) and profile-style (Model RP). With RH sensors, the sensor cartridge can be quickly replaced in the field without removing the application housing. The changeover is done in one minute with no draining or de-pressurizing of the hydraulic cylinder. SPECIFICATION SHEET (pdf format) Specifications Measured Variable: Displacement Resolution: 2 &micro;m or 5 &micro;m Non-Linearity: &lt;&plusmn;0.01% of full scale (minimum &plusmn;40&micro;m) Repeatability: &lt;&plusmn;0.001% of full scale (minimum &plusmn;2.5 &micro;m) Hysteresis: &lt; 4 &micro;m Output: CAN-Field-bus System IS0 11898, DeviceNet release 2.0 Measuring Range: Profile Style (RP): 2 to 200 in. (50 to 5080 mm) Rod Style (RH): 2 to 300 in. (50 to 7620 mm) Operating Voltage: +24 Vdc, (+20%, -15%) Power Consumption: 90 mA typical Operating Temperature: -40&deg;F to 167&deg;F (-40&deg;C to +75&deg;C) Update Time: 0.5ms up to 1200mm, 1.0 ms up to 2400mm, 2.0 ms up to 4800mm, 5.0 ms up to 7620 mm stroke length. Warranty: 2 Years How to Order Temposonics R Series Transducers When placing an order, build the desired model number using this model number guide (below). Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. A selection of Temposonics R-Series sensor configurations are available to meet the demands of your particular application. If you have any questions about how to apply MTS Temposonics position sensors, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized MTS Temposonics distributor and will be glad to help you design an effective position sensing system to fit your application. R __ __ __ __ __ __ __ D 5 1 1 C 2 0 2 __ __ 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1-2. Sensor Model Price RH = Hydraulic Rod Style Sensor Stroke Dependent RP = Profile Style Sensor RF = Flexible Style Sensor 3. Housing Style Temposonics RH or RF only (magnet must be ordered separately): T = US customary threads, raised-face hex, and pressure pipe (RH only) N/C S = US customary threads, flat-faced hex, and pressure pipe (Pressure pipe not included with RF model) N/C M = Metric threads, flat-faced hex, and pressure pipe (Pressure pipe not included with RF model) N/C B = Sensor cartridge only (No application housing/pressure pipe, stroke lengths &#x2264; 72 in.) (RH only) N/C Temposonics RP only (magnet included): V = Captive Sliding Magnet with joint at front (#252184 magnet included) N/C S = Captive Sliding Magnet with joint at top (#252182 magnet included) N/C M = Floating Magnet (#251416-2 magnet included) N/C 4-7. Stroke Length - (must correspond to Stroke Unit of Measurement selected in Item 8) RH Stroke Range = 2-300 inches (50-7620mm) RP Stroke Range = 2-200 inches (50-5080mm) RF Stroke Range = 10-396 inches (255-10060mm) 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 8. Stroke Unit of Measurement ( choose U for inches and tenths or M for millimeters) U = Inches and tenths (Encode in 0.1 inch increments, for example: 0125U = 12.5 in, 1200U = 120 in) M = Millimeters (Encode in 5mm increments, for example: 0120M = 120 mm, 1200M = 1200 mm) 9-11. Connection Type D51 = 5-pin Micro DeviceNet, integral, standard N/C 12. Input Voltage 1 = +24 Vdc (+20%, -15%), standard N/C 13. Output Signal C = CANbus output w/ DeviceNet Protocol N/C 14. Hardware 2 = Standard N/C 15. DeviceNet Protocol Code 02 = DeviceNet N/C 16. Baud Rate 2 = 500 kBd N/C 3 = 250 kBd N/C 4 = 125 kBd N/C 17. Resolution 1 = 0.0002 in. (0.005 mm) N/C 2 = 0.00008 in. (0.002 mm) N/C 18. Cycle Time 1 = Standard N/C Temposonics R-Series Sensors are made-to-order and usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 9/2/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",31);arrFiles[64]=new Array(65,"HTML/MTS-R-Profibus.php","","MTS Temposonics R-Series Profibus Transducers - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Linear Transducers R Series - Rod &amp; Profile Style Position Sensors - Profibus Output MTS Temposonics R-Series Model RP Profile Style Sensor (top) and Model RH Hyrdraulic Rod Style Sensor (bottom). MTS Temposonics R-Series Model RF Flex Style Sensor. The Temposonics R Series Linear Transducers are your solution when you need smart sensor capability for faster, higher precision, more reliable data processing and communication. By preprocessing sensor data in the sensor, your machine controller can reduce processing overhead and carry out other functions. Though the Temposonics R Series is at least four times faster than the other proven lines of Temposonics sensors, it&rsquo;s also more precise: Resolution of 2 microns (0.00008 inch) at 7,500 measurements per second is standard; exceptional non-linearity of 0.02% uncorrected; and hysteresis of 0.00015 inches, which is the best in the industry. Smart Temposonics R Series Transducers with Profibus-DP output are linear and absolute position sensors. Profibus-DP is a vendor-independent, open fieldbus standard (EN 50 170). The DP bus version is designed for high-speed data communication at the machine level with up to 32 nodes per line. Profibus-DP also provides powerful functions for diagnostics and configuration. With Profibus-DP the position of up to 15 magnets (length dependent) on 1 sensor can be detected and communicated at high speed to the controller. Temposonics R sensors offer modular construction and non-contacting magnetostrictive technology. Two application housings are available: rod-style (Model RH) and profile-style (Model RP). With RH sensors, the sensor cartridge can be quickly replaced in the field without removing the application housing. The changeover is done in one minute with no draining or de-pressurizing of the hydraulic cylinder. SPECIFICATION SHEET (pdf format) Specifications Measured Variable: Displacement, speed / optional: multi-magnet measurements (up to 15 magnet positions or 5 positions + velocities) Resolution: Displacement: 5 &micro;m / other values selectable via GSD-file Speed: For 5 &micro;m displacement resolution; 0.64 mm/s up to 500 / 0.43 mm/s up to 2000 / 0.21 mm/s up to 4500 / 0.14 mm/s up to 7600 mm stroke length Non-Linearity: &lt;&plusmn;0.01% of full scale (minimum &plusmn;50 &micro;m) Repeatability: &lt;&plusmn;0.001% of full scale (minimum &plusmn;2.5 &micro;m Hysteresis: &lt; 4 &micro;m Output: Interface: Profibus-DP System ISO 74498 Data format: Profubus-DP (EN 50 170) Data transmission rate: 12 Mbit/s max. Measuring Range: Profile Style (RP): 2 to 200 in. (50 to 5080 mm) Rod Style (RH): 2 to 300 in. (50 to 7620 mm) Operating Voltage: +24 Vdc, (+20%, -15%) Power Consumption: 90 mA typical Operating Temperature: -40&deg;F to +167&deg;F (-40&deg;C to +75&deg;C) Update Time: 0.5 ms typical per magnet (length dependent) Warranty: 2 Years How to Order Temposonics R Series Transducers When placing an order, build the desired model number using this model number guide (below). Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. A selection of Temposonics R-Series sensor configurations are available to meet the demands of your particular application. If you have any questions about how to apply MTS Temposonics position sensors, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized MTS Temposonics distributor and will be glad to help you design an effective position sensing system to fit your application. R __ __ __ __ __ __ __ D __ __ 1 P __ __ __ Z __ __ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1-2. Sensor Model Price RH = Hydraulic Rod Style Sensor Stroke Dependent RP = Profile Style Sensor RF = Flexible Style Sensor 3. Housing Style Temposonics RH or RF only (magnet must be ordered separately): T = US customary threads, raised-face hex, and pressure pipe (RH only) N/C S = US customary threads, flat-faced hex, and pressure pipe (Pressure pipe not included with RF model) N/C M = Metric threads, flat-faced hex, and pressure pipe (Pressure pipe not included with RF model) N/C B = Sensor cartridge only (No application housing/pressure pipe, stroke lengths &#x2264; 72 in.) (RH only) N/C Temposonics RP only (magnet included): V = Captive Sliding Magnet with joint at front (#252184 magnet included) N/C S = Captive Sliding Magnet with joint at top (#252182 magnet included) N/C M = Floating Magnet (#251416-2 magnet included) N/C 4-7. Stroke Length - (must correspond to Stroke Unit of Measurement selected in Item 8) RH Stroke Range = 2-300 inches (50-7620mm) RP Stroke Range = 2-200 inches (50-5080mm) RF Stroke Range = 10-396 inches (255-10060mm) 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 8. Stroke Unit of Measurement ( choose U for inches and tenths or M for millimeters) U = Inches and tenths (Encode in 0.1 inch increments, for example: 0125U = 12.5 in, 1200U = 120 in) M = Millimeters (Encode in 5mm increments, for example: 0120M = 120 mm, 1200M = 1200 mm) 9-11. Connection Type D63 = 6-pin DIN connector, integral, standard dual connectors N/C D53 = 5-pin M12 dual, and one 4-pin male M8, integral connectors 63.00 12. Input Voltage 1 = +24 Vdc (+20%, -15%) N/C 13. Output Signal P = Profibus Protocol N/C 14 - 16. Profibus Hardware and Software Code 101 = Mutil-magnets, (multiple position measurements) max. 15 positions (select number of magnets below) 63.00 102 = Single Magnet, (standard) N/C 103 = Position + Velocity, (max. 5 positions/velocities) (select number of magnets below) 63.00 17 - 19. Number of Magnets (for multi-position measurements only) Z __ __ = Number of Magnets for output P101 (range 02-15), or for output P103 (range 02-05) Order additional magnets separately on the MTS Magnets page. Select 2 magnets 3 magnets 4 magnets 5 magnets 6 magnets 7 magnets 8 magnets 9 magnets 10 magnets 11 magnets 12 magnets 13 magnets 14 magnets 15 magnets Temposonics R-Series Sensors are made-to-order and usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 9/2/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",32);arrFiles[65]=new Array(66,"HTML/MTS-GSeries-Sensors.php","","MTS Temposonics G-Series Linear Position Transducers - Equipment from West Coast Plastics","","","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Linear Transducers Temposonics G Series - Next Generation Position Sensors For Upgrading from Obsolete Tempo II and L-Series Sensors MTS Sensors, the inventors of magnetostrictive position sensing and makers of Temposonics sensors, is proud to introduce the new G-Series Linear Position Sensors utilizing their next generation technology platform. The new G-Series position sensors feature a microprocessor-based design with enhanced diagnostics and programmability. They are available in both Hydraulic Rod Style and Profile Style housing configurations. Backwards compatibility is one of the primary benefits of the new G-Series position sensor. G-Series position sensors provide the same functionality as Tempo II and L-Series sensors, making them an ideal direct replacement for these products. Advanced Communication and Programmability By using external communication for monitoring and programming of the G-Series position sensor, there is no need to open the electronics housing. This simplifies installation and commissioning, saving valuable time. Keeping the sensor electronics isolated ensures that seal integrity and the highest product reliability are maintained. The new platform technology inside the G-Series enables: Infrared (IR) send and receive for wireless communication Built-in serial interfaces for robust hard-wired serial communication (RS-422 for digital-pulse outputs and RS-485 for analog outputs) Remote programmability for operational modes and sensor parameters Enhanced monitoring and diagnostic capabilities In addition to providing advanced programming and diagnostic capabilities in a rugged package, the G-Series position sensors also include the following features: Electronics housing small enough to allow for drop in replacements of legacy Temposonics products Standard 24Vdc and extended input power supply options for compatibility with older controller interfaces Fully adjustable voltage and current outputs within: -10 to +10 Vdc or +10 to -10 Vdc 0 to 20 mA or 20 to 0 mA Digital-pulse outputs: Start/Stop and PWM All outputs available up to 300 in. stroke length (hydraulic-rod style) Up to 15 magnet positions simultaneously using the Start/Stop output option Integral connector replacement options including: hanging (inline) connectors, adapter cables, and field-installed connector kits. SPECIFICATION SHEET Enhanced Monitoring and Diagnostics The G-Series simple visual user interface helps resolve the majority of customer installation and troubleshooting issues. Integrated LEDs (see image below) indicate: Normal operating conditions Error conditions, power and sensor/control interface issues Programming modes (IR or hard wired) Hard-wire G-Series serial communication enables diagnostic feedback at a convenient remote location. Access to internal sensor conditions minimizes troubleshooting efforts and enables the development of more sophisticated controller diagnostic routines. All of these features will simplify sensor installation and maximize operational productivity. Specifications Measured Variable: Displacement Resolution: Analog: Infinite Digital: 1&divide; [gradient x crystal freq. (mHz) x circulation] Non-Linearity: &lt;&plusmn;0.02% of full stroke or &plusmn;0.002 in. (&plusmn;0.05mm) whichever is greater. Repeatability: &plusmn;0.001% of full stroke or &plusmn;0.0001 in. (&plusmn;0.0025mm), whichever is greater. Outputs: Analog: Voltage or Current Digital: Start/Stop or PWM Measuring Range: Profile Style: Analog: 50 to 2540 mm (2 to 100 in.) Digital: 50 to 5080 mm (2 to 200 in.) Hydraulic Rod Style: 1 to 300 in. (25 to 7620 mm) Analog: 50 to 2540 mm (2 to 100 in.) Digital: 50 to 7620 mm (2 to 300 in.) Operating Voltage: +24 Vdc nominal (20.4 - 28.8 Vdc) standard +9 to +23 Vdc optional Operating Temperature: -40&deg;F to 176&deg;F (-40&deg;C to 80&deg;C) EMC Test: Emissions IEC/EN 61000-6-3, Immunity IEC/EN 61000-6-2, IEC/EN 61000-4-2/3/4/5/6/8, level 3/4 criterium A, CE qualified Shock Rating: 100 g (single hit)/IEC standard 68-2-27 (survivability) Vibration Rating: 5 g/10-2000 Hz/IEC standard 68-2-6 Adjustability: Field adjustable null and span (analog sensors only) Update Time: Analog: &lt; 1ms (typical) Digital: Minimum = [2.5 + null + stroke (inches)] x 10.0 ms/in x [number of recirculations] Warranty: 2 Years PROFILE STYLE (GP Model) Electronic Head: aluminum housing Sealing: IP67 Sensor Extrusion: Aluminum (Temposonics profile style) Mounting: Adjustable mounting fee or T-slot M5 nut in base channel Magnet Type: Captive-sliding magnet or floating magnet ROD STYLE (GH Model) Electronic Head: aluminum housing Sealing: IP67 Sensor Rod: 304L Stainless Steel Operating Pressure: 350 bar (5,000psi) static, 690 bar (10,000 psi) spike Mounting: Threaded flange M18 x 1.5 or 3/4-16 UNF-3A Typical Mounting Torque: 45 N-m (33 ft.-lbs.) Magnet Type: Ring or floating magnet How to Order Temposonics G Series Transducers When placing an order, build the desired model number using this model number guide (below). Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. A selection of Temposonics G-Series sensor configurations are available to meet the demands of your particular application. If you have any questions about how to apply MTS Temposonics position sensors, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized MTS Temposonics distributor and will be glad to help you design an effective position sensing system to fit your application. G __ __ __ __ __ __ __ __ __ __ __ __ __ __ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1-2. Sensor Model Price GH = Hydraulic Rod Style Sensor Stroke Dependent GP = Profile Style Sensor 3. Housing Style Temposonics GH only (magnet must be ordered separately): T = US customary threads, raised-face hex, and pressure tube N/C S = US customary threads, flat-faced hex, and pressure tube N/C M = Metric threads, flat-faced hex, and pressure tube N/C Temposonics GP only (magnet included): V = Captive Sliding Magnet with joint at front (#252184 magnet included) N/C S = Captive Sliding Magnet with joint at top (#252182 magnet included) N/C M = Floating Magnet (#251416-2 magnet included) N/C 4-7. Stroke Length - Stroke range = 002.0 to 300.0 in. or 0050-7620mm (must correspond to Stroke Unit of Measurement selected in Item 8) GH Voltage or Current Stroke Range = 2-100 inches (50-2540mm) GH Digital Pulse Stroke Range = 2-300 inches (50-7620mm) GP Voltage or Current Stroke Range = 2-100 inches (50-2540mm) GP Digital Pulse Stroke Range = 2-200 inches (50-5080mm) 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 8. Stroke Unit of Measurement ( choose U for inches and tenths or M for millimeters) U = Inches and tenths (Encode in 0.1 inch increments, for example: 0125U = 12.5 in, 1200U = 120 in) M = Millimeters (Encode in 5mm increments, for example: 0120M = 120 mm, 1200M = 1200 mm) 9-11. Connection Type D60 = 6-pin DIN connector, integral, standard N/C MS0 = 10-pin MS style, male (digital pulse output) 124.00 R05 = Integral cable 5-foot (2 meters if metric), PVC jacket with pigtail connection (call if longer cable needed) N/C F05 = Integral cable 5-foot (2 meters if metric), PUR C jacket with pigtail connection (call if longer cable needed) 28.00 RB1 = 1 foot integral cable, PVC jacket, with male in-line RB connector 2 57.00 RB2 = 5 foot integral cable, PVC jacket, with male in-line RB connector 2 66.00 FM1 = 1 foot integral cable, PUR 1 jacket, with male in-line 10-pin MS connector 3 93.00 FM2 = 5 foot integral cable, PUR 1 jacket, with male in-line 10-pin MS connector 3 112.00 12. Input Voltage 1 = +24 Vdc (+20%, -15%), standard N/C 2 = +9 to +28.8 Vdc 4 73.00 13-14. Output Signal (2 or 3 digit code depending on output selected) Analog - Voltage V0 = 0 to +10 Vdc N/C V1 = +10 to 0 Vdc N/C V2 = -10 to +10 Vdc N/C V3 = +10 to -10 Vdc N/C Analog - Current A0 = 4 to 20 mA N/C A1 = 20 to 4 mA N/C A2 = 0 to 20 mA N/C A3 = 20 to 0 mA N/C Digital - Pulse R0 = Start/Stop - If more than one magnet needed, enter the number of magnets in hexadecimal in item 15 below N/C N0 = Start/Stop output wired for square wave neuter. - If more than one magnet needed, enter the number of magnets in hexadecimal in item 15 below N/C DE = Pulse-Width Modulated (PWM) with External Interrogation. Fill in the desired number of circulations in hexadecimal in item 15 below. N/C DI = Pulse-Width Modulated (PWM) with Internal Interrogation. Fill in the desired number of circulations in hexadecimal in item 15 below. N/C 15. Number of Magnets (for Output R0 or N0) or Number of Circulations (for Output DE or DI) 0 = 0 3 =3 6 = 6 9 = 9 C = 12 F = 15 1 = 1 4 = 4 7 = 7 A = 10 D = 13 G = 16 2 = 2 5 = 5 8 = 8 B = 11 E = 14 K = 20 N/C NOTES: 1 Polyurethane jacketed cable for use where higher resistance to moisture, oil and other environmental conditions are required. 2 Wired for analog or digital pulse depending on output selected. For Tempo II and LH replacements and retrofits only. 3 Wired for analog or digital pulse depending on output selected. For LH replacements and retrofits only. 4 Selected when retrofitting sensors with &plusmn; 15 Vdc input voltages. Temposonics G-Series Sensors are made-to-order and usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 9/2/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",39);arrFiles[66]=new Array(67,"HTML/MTS-R-EtherCat.php","","MTS Temposonics R-Series EtherCat Transducers - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Linear Transducers R Series - Rod &amp; Profile Style Position Sensors - EtherCat Output MTS Temposonics R-Series Model RP Profile Style Sensor (top) and Model RH Hyrdraulic Rod Style Sensor (bottom). MTS Temposonics R-Series Model RF Flex Style Sensor. The Temposonics R Series Linear Transducers are your solution when you need smart sensor capability for faster, higher precision, more reliable data processing and communication. By preprocessing sensor data in the sensor, your machine controller can reduce processing overhead and carry out other functions. Though the Temposonics R Series is at least four times faster than the other proven lines of Temposonics sensors, it&rsquo;s also more precise: Resolution of 1 &micro;m (0.00004 inch) at 100 &micro;sec update rate; exceptional non-linearity of 0.01%; and hysteresis of 0.001% of full scale, which is the best in the industry. Temposonics R-Series EtherCAT sensors represent MTS Sensors&rsquo; latest development in high-speed networked position feedback. EtherCAT (Ethernet for Control Automation Technology) is a unique interface for industrial Ethernet that provides the fastest, most deterministic industrial networking solution possible using the base Ethernet physical layer. This format, coupled with our high speed networked sensing capability, enables machine builders and automation engineers to overcome bandwidth and node limitation issues of other commercially available networks. There are two versions available: E101 Fast update position and velocity Designed for high speed motion control Up to 5 simultaneous magnet measurements 100 msec update rate E102 Multi-magnet position and velocity Designed for gauging systems having many magnet positions Up to 20 simultaneous magnet measurements Standard update rates Temposonics R sensors offer modular construction and non-contacting magnetostrictive technology. Two application housings are available: rod-style (Model RH) and profile-style (Model RP). With RH sensors, the sensor cartridge can be quickly replaced in the field without removing the application housing. The changeover is done in one minute with no draining or de-pressurizing of the hydraulic cylinder. SPECIFICATION SHEET (pdf format) Specifications Measured Variable: Displacement/Velocity 1-5 magnet measurement Option 1-20 magnet measurement Resolution: Displacement - 1 &micro;m or 1000 &micro;m selectable Speed - 1&micro;m/s (Quality rating) adjustable according to velocity and measuring length Non-Linearity: &lt;&plusmn;0.01% of full scale (minimum &plusmn; 50 &micro;m) Repeatability: &lt;&plusmn;0.001% of full scale (minimum &plusmn; 2.5 &micro;m) Hysteresis: &lt; 4 &micro;m Outputs: Interface: EtherCAT Data Format: EtherCAT 100 Base-Tx, fast Ethernet Data transmission rate: 100Mbit/s max. Measuring Range: Profile Style (RP): 2 to 200 in. (50 to 5080 mm) Rod Style (RH): 2 to 300 in. (50 to 7620 mm) Operating Voltage: +24 Vdc, (+20%, -15%) Power Consumption: 90 mA typical Operating Temperature: -40&deg;C to +75&deg;C ( -40&deg;F to +167&deg;F) Update Time: 10 KHz. Warranty: 2 Years How to Order Temposonics R Series Transducers When placing an order, build the desired model number using this model number guide (below). Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. A selection of Temposonics R-Series sensor configurations are available to meet the demands of your particular application. If you have any questions about how to apply MTS Temposonics position sensors, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized MTS Temposonics distributor and will be glad to help you design an effective position sensing system to fit your application. R __ __ __ __ __ __ __ __ __ __ 1 E __ __ __ Z __ __ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1-2. Sensor Model Price RH = Hydraulic Rod Style Sensor Stroke Dependent RP = Profile Style Sensor RF = Flexible Style Sensor 3. Housing Style Temposonics RH rod style only (magnet must be ordered separately): T = US customary threads, raised-faced flange and pressure tube, standard N/C S = US customary threads, flat-faced flange and pressure tube, standard N/C M = Metric threads, flat-faced flange and pressure tube, standard N/C B = Sensor cartridge only, no flange and pressure tube. Stroke length &lt; 1830 mm (72 in.) (No application housing/pressure pipe, stroke lengths &#x2264; 72 in.) (RH only) N/C Model RF flex sensor only, magnet must be ordered separately: S = US customary threads, flat-faced flange N/C M = Metric threads, flat-faced flange N/C Temposonics RP profile style sensor only (magnet included): V = Captive Sliding Magnet with joint at front (#252184 magnet included) N/C S = Captive Sliding Magnet with joint at top (#252182 magnet included) N/C M = Floating Magnet (#251416-2 magnet included) N/C 4-7. Stroke Length - (must correspond to Stroke Unit of Measurement selected in Item 8) RH Stroke Range = 2-300 inches (50-7620mm) RP Stroke Range = 2-200 inches (50-5080mm) RF Stroke Range = 10-396 inches (255-10060mm) 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 8. Stroke Unit of Measurement (choose U for inches and tenths or M for millimeters) U = Inches and tenths (Encode in 0.1 inch increments, for example: 0125U = 12.5 in, 1200U = 120 in) M = Millimeters (Encode in 5mm increments, for example: 0120M = 120 mm, 1200M = 1200 mm) 9-11. Connection Type D56 = 2 x 4 pin, female (M12-D), plus 4-pin male (M8) N/C 12. Input Voltage 1 = +24 Vdc (+20%, -15%) N/C 13 - 16. Output Signal E101 = EtherCAT, position and velocity, maximum 5 magnets N/C E102 = EtherCAT, position and velocity, maximum 20 magnets 63.00 17 - 19. Number of Magnets (for multi-position measurements only) Z __ __ = Number of Magnets for output E101 (range 02 to 05), or for output E102 (ranger 02 - 20). Order additional magnets separately on the MTS Magnets page. Select 2 magnets 3 magnets 4 magnets 5 magnets 6 magnets 7 magnets 8 magnets 9 magnets 10 magnets 11 magnets 12 magnets 13 magnets 14 magnets 15 magnets 16 magnets 17 magnets 18 magnets 19 magnets 20 magnets Temposonics R-Series Sensors are made-to-order and usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 9/2/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",32);arrFiles[67]=new Array(68,"HTML/MTS-EP-Sensor.php","","MTS Temposonics EP and EL Economy Profile-Style Transducers - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Linear Transducers EP &amp; EL Series Profile-Style Economy Position Sensors Model EP position sensor - Full Size Profile Housing Stroke Length: 50 mm to 3000 mm (2 in. to 120 in.) Model EL position sensor - Low Height Profile Housing Stroke Length: 50 mm to 2500 mm (2 in. to 100 in.) MTS Temposonics EP Profile-Style and EL Low-Profile Economy Linear Transducers are highly repeatable, absolute position sensors for linear measurement. Absolute measurement offers safety for machine and automation devices. With absolute output, position information is instantly available. Power-down situations do not require rehoming of the device. Using the unique magnetostrictive principle , that MTS pioneered, the sensor precisely senses the position of an external magnet through the housing wall, to measure position with a high degree of resolution and accuracy. The Temposonics EP/EL sensor&rsquo;s innovative design is a result of MTS&rsquo;s experience in magnetostrictive technology combined with solid engineering, extremely rugged construction and modern electronics. The Temposonics EP/EL is a precise, durable and cost effective alternative to linear potentiometers. They offer all the advantages of a non-contact position sensor suitable for a wide range of machines and automation applications. Features Ideal Replacement for Linear Pots Non-contacting Temposonics sensing technology Economical pricing High resolution and linearity Proven reliability and ruggedness SPECIFICATION SHEET (pdf format) Specifications Measured Variables: Displacement Resolution: Analog: Infinite Digital: 1 / [gradient x crystal freq. (MHz) x circulations]; controller dependent Non-Linearity: &lt;&plusmn;0.02% of full stroke (minimum &plusmn; 60 &micro;m) Repeatability: &lt;&plusmn;0.001% of full stroke Outputs: Voltage: 0 to 10 Vdc and 10 to 0 Vdc (controller input resistance RL &gt; 5 kOhm) Current: 4 to 20 mA or 20 to 4 mA (min/max load: 0/500 Ohm) Start/Stop; RS-422 differential signal (Serial parameter upload available for: measuring range, offset, gradient, status, and manufacturer number) Measuring Range: 2 to 60 in. or 50 to 1525 mm. Operating Voltage: +24 Vdc nominal (+20%, -15%) Power Consumption: 50 to 140 mA (output &amp; stroke dependent) Operating Temperature: Head Electronics -40&deg;F to 167&deg;F Sensing Element -40&deg;F to 221&deg;F Sealing: IP65 if mating cable connector is correctly fitted Update Frequency: Voltage or Current: &gt; 1.5 kHz Start/Stop: Controller dependent Warranty: 2 Years MTS Temposonics Series EP &amp; EL Position Sensor Ordering To order, complete the code number below by selecting the options desired in each category. Then click the submit button. The part number and price will be displayed on the next page. E __ 0 __ __ __ __ __ D __ __ 1 __ __ __ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1-2. Sensor Model EP = E-Series Profile-Style Position Transducer EL = E-Series Low-Profile Position Transducer 3. Magnet Style 0 = EP and EL Sensors do not have housing options magnet types included in the standard model number. Magnets must be purchased separately by part number on the E-Series Accessories page. 4-7. Stroke Length - Stroke range U = 002.0 to 120.0 in., M = 0050-3000mm (must correspond to Stroke Unit of Measurement selected in Item 8) 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 8. Stroke Unit of Measurement ( choose U for inches and tenths or M for millimeters) U = Inches and tenths (Encode in 1, 2 or 4 inch increments as indicated in chart below) M = Millimeters (Encode in 25mm, 50mm or 100mm increments as indicated in chart below) Stroke Length (inches)* Ordering Increment Stroke Length (mm)* Ordering Increment &#x2264; 20 inches 1 inch &#x2264; 500mm 25mm &gt; 20 inches and &#x2264; 100 inches 2 inches &gt; 500mm and &#x2264; 2500 mm 50mm &gt; 100 inches and &#x2264; 120 inches 4 inches &gt; 2500mm and &#x2264; 3000mm 100mm * The maximum stroke length for Analog Voltage and Current sensors is 100 inches or 2500mm. 9-11. Connector D34 = 5-Pin (M12), male, (Analog output - current and voltage) D84 = 8-Pin (M12), male, (Digital output - start/stop) 12. Input Voltage 1 = +24 Vdc (+20%, -15%) 13-15. Output Signal Analog - Voltage V01 = 0 to +10 Vdc (1 output channel with 1 magnet) V11 = +10 to 0 Vdc (1 output channel with 1 magnet) V02 = 0 to +10 Vdc (2 output channels with 2 magnets) V12 = +10 to 0 Vdc (2 output channel2 with 2 magnets) V03 = 0 to +10 Vdc and +10 to 0 Vdc (2 output channels with 1 magnet) Analog - Current A01 = 4 to 20 mA (1 output channel with 1 magnet) A11 = 20 to 4 mA (1 output channel with 1 magnet) A02 = 4 to 20 mA (2 output channels with 2 magnets) A12 = 20 to 4 mA (2 output channels with 2 magnets) Digital - Pulse R3 = Start/Stop with sensor parameters upload function Fully compatible with the Start/Stop output Option R0 used in the previous generation E-Series sensors. Temposonics EP &amp; EL Sensors are made-to-order and usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 5/18/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",28);arrFiles[68]=new Array(69,"HTML/MTS-ER-Sensor.php","","MTS Temposonics ER-Series Economy Rod &amp; Cylinder-Style Transducers - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Linear Transducers ER Series Rod &amp; Cylinder-Style Economy Position Sensors MTS Temposonics ER Rod &amp; Cylinder-Style Economy Linear Transducers are highly repeatable, absolute position sensors for linear measurement. Absolute measurement offers safety for machine and automation devices. With absolute output, position information is instantly available. Power-down situations do not require rehoming of the device. Using the unique magnetostrictive principle , that MTS pioneered, the sensor precisely senses the position of an internal magnet as the rod moves, to measure position with a high degree of resolution and accuracy. The Temposonics ER sensor&rsquo;s innovative design is a result of MTS&rsquo;s experience in magnetostrictive technology combined with solid engineering, extremely rugged construction and modern electronics. The Temposonics ER is a precise, durable and cost effective alternative to linear potentiometers. They offer all the advantages of a non-contact position sensor suitable for a wide range of machines and automation applications. FEATURES Ideal Replacement for Linear Pots Non-contacting Temposonics sensing technology Economical pricing High resolution and linearity Proven reliability and ruggedness SPECIFICATION SHEET Specifications Measured Variables: Displacement Resolution: Analog - Infinite Start/Stop: 0.005mm Non-Linearity: &lt;&plusmn;0.02% of full stroke Repeatability: &lt;&plusmn;0.001% of full stroke Hysteresis: &lt;0.004 mm Outputs: Voltage: 0 to +10 Vdc or +10 to 0 Vdc (controller input resistance RL &gt; 5 kOhm) Current: 4-20 mA or 20-4 mA (min/max load: 0/500 Ohm) Start/Stop; RS-422 differential signal (Serial parameter upload available for: measuring range, offset, gradient, status, and manufacturer number) Start/Stop: RS-422 differential signal Measuring Range: 2 to 60 in. or 50 to 1500 mm. ER sensors standard stroke ranges are 3, 6, 9, 12, 15, 18, 21, 24, 30, 36, 42 48, 54 and 60 inches (75, 100, 150, 200, 300, 400, 500, 600, 750, 1000, 1250, 1500 mm). Custom stroke lengths available Operating Voltage: +24 Vdc (+20%, -15%) Power Consumption: 50 to 140 mA (output &amp; stroke dependent) Operating Temperature: -40&deg;C to 75&deg;C Sensing Head &amp; Housing: Aluminum Rod: Stainless Steel Type 303 Sealing: IP67 Warranty: 2 Years MTS Temposonics Series ER Position Sensor Ordering To order, complete the code number below by selecting the options desired in each category. Then click the submit button. The part number and price will be displayed on the next page. E R __ __ __ __ __ __ D __ __ 1 __ __ __ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1-2. Sensor Model ER = E-Series Rod &amp; Cylinder-Style Position Transducer 3. Type of Thread (choose S or M) S = Inside thread 1/4-28 (English). Must be used for ER sensors having US stroke lengths (U in item 8). M = Inside thread M6 (Metric). Must be used for ER sensors having Metric stroke lengths (M in item 8). 4-7. Stroke Length - Stroke range = 002.0 to 060.0 in. or 0050-1500mm (must correspond to Stroke Unit of Measurement selected in Item 8) 0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 8. Stroke Unit of Measurement (choose U for inches and tenths or M for millimeters) U = Inches and tenths- Encode in 1 or 2 inch increments , for example: 0050U = 5.0 in, 0600U = 60.0 in (Preferred stroke lengths are: 3, 6, 9, 12, 15, 18, 22, 24, 30, 42, 48 and 54 inches) M = Millimeters (Encode in 25 or 50mm increments , for example: 0125M = 125 mm, 1200M = 1200 mm) (Preferred stroke lengths are: 75, 100, 150, 200, 300, 400, 500, 600, 750, 1000 and 1250 mm) Stroke Length (inches)* Ordering Increment Stroke Length (mm)* Ordering Increment &#x2264; 20 inches 1 inch &#x2264; 500mm 25mm &gt; 20 inches and &#x2264; 60 inches 2 inches &gt; 500mm and &#x2264; 1500 mm 50mm 9-11. Connector D34 = 5-Pin (M12), male, (Analog output - current and voltage) D84 = 8-Pin (M12), male, (Digital output - start/stop) 12. Input Voltage 1 = +24 Vdc (+20%, -15%), standard 13-15. Output Signal (choose V01, V11, V03, A01, A11 or R3) Analog - Voltage V01 = 0 to +10 Vdc V11 = +10 to 0 Vdc V03 = 0 to +10 Vdc and +10 to 0 Vdc (2 output channels) Analog - Current A0 = 4 to 20 mA A1 = 20 to 4 mA Digital - Pulse R3 = Start/Stop with sensor parameters upload function. Fully compatible with the Start/Stop output Option R0 used in the previous generation E-Series sensors. NOTE: Mounting feet for the Temposonics ER sensor must be ordered separately. Order 2 mounting feet, (Part No. 403508), for sensors up to 50 in. (1250mm). One additional mounting foot is recommended for longer lengths. Temposonics ER Sensors are made-to-order and usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 5/20/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",26);arrFiles[69]=new Array(70,"HTML/MTS-EH-Sensor.php","","MTS Temposonics EP and EL Economy Profile-Style Transducers - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Linear Transducers EH Series Hydraulic Rod Style Economy Position Sensors Model EH position sensor - Hydraulic Rod Style Stroke Length: 50 mm to 2500 mm (2 in. to 100 in.) MTS Sensors continues to establish new performance standards for low-cost, fully-industrial, durable position sensors using the widely preferred magnetostrictive technology. This principle for accurate and non-contact measurement of linear-position sensing was developed 30 years ago by MTS and is used with outstanding success in a large variety of industrial applications. The Temposonics model EH sensor provides as much performance as you need for your application - you benefit from the advantages of magnetostrictive position measurement at optimum costs. The Temposonics&reg; Model EH sensor features a pressure resistant sensor rod for direct stroke measurement inside hydraulic cylinders. With its minimized sensor head and either a 7 mm or 10 mm rod, it is the ideal solution when space is critical. For long strokes, the model EH is available with measuring ranges up to 2500 mm (or 100 in.). The model EH sensor offers completely sealed stainless-steel housing for long life position measurement for rugged environments. When installed with the appropriate mating connector and cable, it features protection up to IP69K and is suitable for high-pressure washdown applications. Features Linear, Absolute Measurement&#132;&#132; Non-Contact Sensing Technology&#132;&#132; Linearity Deviation Less Than 0.02% F.S.&#132;&#132; Repeatability Within 0.001% F.S.&#132;&#132; Two Outputs Available: &#132;&#132;Analog (Voltage/Current) Forward or Reverse Acting Digital-Pulse Output (Start/Stop) Simple Sensor Parameter Upload (for Start/Stop)&#132;&#132; Stroke Length Range: 50 mm to 2500 mm (or 2 in. to 100 in.)&#132;&#132; Hermetically-Sealed Stainless Steel For IP69K Ingress Protection EMI Shielded and CE Certified SPECIFICATION SHEET (pdf format) Specifications Measured Variables: Position Resolution: Analog: Infinite (restricted by output ripple) Start/Stop: 0.1, 0.01 and 0.005mm (controller dependent) Non-Linearity: &lt;&plusmn;0.02% of full stroke (minimum &plusmn; 60 &micro;m) Repeatability: &lt;&plusmn;0.001% of full stroke (minimum &plusmn; 5 &micro;m) Outputs: Voltage: 0 to 10 Vdc or 10 to 0 Vdc (controller input resistance RL &gt; 5 kOhm) Current: 4 to 20 mA or 20 to 4 mA (min/max load: 0/500 Ohm) Start/Stop; RS-422 differential signal (Serial parameter upload available for: measuring range, offset, gradient, status, and manufacturer number) Measuring Range: 2 to 100 in. or 50 to 2500 mm. Operating Voltage: +24 Vdc nominal (+20%, -15%) Power Consumption: 50 to 140 mA (output &amp; stroke dependent) Operating Temperature: -40&deg;F to 167&deg;F Sealing: IP69K - suitable for high pressure washdown applications Warranty: 2 Years MTS Temposonics Series EH Position Sensor Ordering To order, complete the code number below by selecting the options desired in each category. Then click the submit button. The part number and price will be displayed on the next page. E H __ __ __ __ __ __ D __ __ 1 __ __ __ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1-2. Sensor Model EH = E-Series Hydraulic Rod Style Position Transducer NOTE: Magnets must be purchased separately by part number on the E-Series Accessories page. 3. Rod Housing and Flange Type K = Flange M18 x 1.5 / Rod 7 mm diameter M = Flange M18 x 1.5 / Rod 10 mm diameter L = Flange 3/4 in. UNF / Rod 7 mm diameter S = Flange 3/4 in. UNF / Rod 10 mm diameter 4-7. Stroke Length - Stroke range U = 002.0 to 100.0 in., M = 0050-2500mm (must correspond to Stroke Unit of Measurement selected in Item 8) 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 8. Stroke Unit of Measurement ( choose U for inches and tenths or M for millimeters) U = Inches and tenths (Encode in 0.2, 0.5, 1 or 2 inch increments as indicated in chart below) M = Millimeters (Encode in 5mm, 10mm, 25mm 50mm increments as indicated in chart below) Stroke Length (inches)* Ordering Increment Stroke Length (mm)* Ordering Increment &#x2264; 20 inches 0.2 inches &#x2264; 500mm 5mm &gt; 20 inches and &#x2264; 30 inches 0.5 inches &gt; 500mm and &#x2264; 750 mm 10mm &gt; 30 inches and &#x2264; 40 inches 1 inches &gt; 750mm and &#x2264; 1000 mm 25mm &gt; 40 inches and &#x2264; 100 inches 2 inches &gt; 1000mm and &#x2264; 2500mm 50mm 9-11. Connector D34 = 5-Pin (M12), male, (Analog output - current and voltage) D84 = 8-Pin (M12), male, (Digital output - start/stop) 12. Input Voltage 1 = +24 Vdc (+20%, -15%) 13-15. Output Signal Analog - Voltage V01 = 0 to +10 Vdc (1 output channel with 1 magnet) V11 = +10 to 0 Vdc (1 output channel with 1 magnet) V02 = 0 to +10 Vdc (2 output channels with 2 magnets) V12 = +10 to 0 Vdc (2 output channel2 with 2 magnets) V03 = 0 to +10 Vdc and +10 to 0 Vdc (2 output channels with 1 magnet) Analog - Current A01 = 4 to 20 mA (1 output channel with 1 magnet) A11 = 20 to 4 mA (1 output channel with 1 magnet) A02 = 4 to 20 mA (2 output channels with 2 magnets) A12 = 20 to 4 mA (2 output channels with 2 magnets) Digital - Pulse R3 = Start/Stop with sensor parameters upload function Fully compatible with the Start/Stop output Option R0 used in the previous generation E-Series sensors. Temposonics EH Sensors are made-to-order and usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 5/20/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",29);arrFiles[70]=new Array(71,"HTML/MTS-EP2-Analog.php","","MTS Temposonics EPS Sensors with Analog Output - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search MTS Temposonics EP2 Sensors with Analog Output Features: Linear, absolute position measurement Direct analog position output: 0-10 Vdc Highly durable, non-contacting design Measurement Stroke Lengths: 4, 6, 9, 12, 15, 18, 21, 24, 30, 36, 42, 48, 54 and 60 inches Integral Cable Connection Repeatability better than 0.005% Non-linearity better than 0.03% CE Certified One Year Warranty There is a new standard of excellence in position sensing. The MTS Temposonics EP2 sensor establishes new performance standards for low-cost, fully-industrial, durable position sensors using the widely preferred magnetostrictive technology. This principle for accurate and non-contact measurement of linear-position sensing was developed 30 years ago by MTS and is used with outstanding success in a large variety of industrial applications. Industrial applications include harsh environmental conditions such as presses, injection molding, tire presses, rolling plants, tunnel driving machines and hydraulic units. Analog Output: Temposonics E-Series Model EP2 analog output sensors come with integrated analog conditioning electronics. The sensor can be connected to a control system or indicator directly without the need for an additional interface. The built-in microelectronics produce a continuous voltage output that is proportional to the magnet position. The active measurement stroke range is factory set. Accessories Included: (1) Magnet and (1) Pair of Mounting Feet (Stroke Lengths of 4 to 48) (1) Magnet and (2) Pair of Mounting Feet (Stroke Lengths &gt; 48) Download MTS EP2 Analog Output Transducer Spec Sheet (pdf) Part No. Description Price Order Quantity EP2A-004 Analog Output - 4 Inch Stroke Length Sensor 191.00 Enter qty: EP2A-006 Analog Output - 6 Inch Stroke Length Sensor 200.00 Enter qty: EP2A-009 Analog Output - 9 Inch Stroke Length Sensor 210.00 Enter qty: EP2A-012 Analog Output - 12 Inch Stroke Length Sensor 217.00 Enter qty: EP2A-015 Analog Output - 15 Inch Stroke Length Sensor 227.00 Enter qty: EP2A-018 Analog Output -18 Inch Stroke Length Sensor 236.00 Enter qty: EP2A-021 Analog Output - 21 Inch Stroke Length Sensor 247.00 Enter qty: EP2A-024 Analog Output - 24 Inch Stroke Length Sensor 258.00 Enter qty: EP2A-030 Analog Output - 30 Inch Stroke Length Sensor 271.00 Enter qty: EP2A-036 Analog Output - 36 Inch Stroke Length Sensor 285.00 Enter qty: EP2A-042 Analog Output - 42 Inch Stroke Length Sensor 302.00 Enter qty: EP2A-048 Analog Output - 48 Inch Stroke Length Sensor 312.00 Enter qty: EP2A-054 Analog Output - 54 Inch Stroke Length Sensor 340.00 Enter qty: EP2A-060 Analog Output - 60 Inch Stroke Length Sensor 372.00 Enter qty: 252887 Floating Block Magnet, Style L for EP2 Sensor (one included with sensor purchase) 27.00 Enter qty: Sensors usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 3/10/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",26);arrFiles[71]=new Array(72,"HTML/MTS-EP2-Digital.php","","MTS Temposonics EPS Sensors with Digital Output - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search MTS Temposonics EP2 Sensors with Digital Output Features: Linear, absolute position measurement Start/Stop (pulse) position output Highly durable, non-contacting design Measurement Stroke Lengths: 4, 6, 9, 12, 15, 18, 21, 24, 30, 36, 42, 48, 54 and 60 inches Integral Cable Connection Repeatability better than 0.005% Non-linearity better than 0.02% CE Certified One Year Warranty There is a new standard of excellence in position sensing. The MTS Temposonics EP2 sensor establishes new performance standards for low-cost, fully-industrial, durable position sensors using the widely preferred magnetostrictive technology. This principle for accurate and non-contact measurement of linear-position sensing was developed 30 years ago by MTS and is used with outstanding success in a large variety of industrial applications. Industrial applications include harsh environmental conditions such as presses, injection molding, tire presses, rolling plants, tunnel driving machines and hydraulic units. Digital Output: Digital-pulse output for the EP2 sensor is Start/Stop. Here the sensor requires a start signal from a controller or interface card to initiate the measurement cycle. The sensor generates a stop signal at the end of the measurement cycle that is used to stop the controller \'s counter clock. The elapsed time between the Start and Stop signals is directly proportional to the magnet \'s position along the active stroke length. The controller can calculate the absolute position of the magnet from the time value and the sensor \'s unique gradient value, (inverse of the speed for the ultrasonic pulse traveling in the sensor \'s waveguide). Multi-Position Measurements: The Model EP2 digital-pulse output sensor can provide multi-position measurements when used with more than one position magnet, and an appropriate controller/interface card. The minimum allowed distance between magnets is 3.0 in (76 mm) to maintain proper sensor output. The total number of magnets is limited by the EP2 stroke length, and the particular interface card/controller that is used. Temposonics E-Series Model EP2 analog output sensors come with integrated analog conditionaing electronics. The sensor can be connected to a control system or indicator directly without the need for an additional interface. The built-in microelectronics produce a continuous voltage output that is proportional to the magnet position. The active measurement stroke range is factory set. Accessories Included: (1) Magnet and (1) Pair of Mounting Feet (Stroke Lengths of 4 to 48) (1) Magnet and (2) Pair of Mounting Feet (Stroke Lengths &gt; 48) Download MTS EP2 Digital Output Transducer Spec Sheet (pdf) Part No. Description Price Order Quantity EP2D-004 Start/Stop Output - 4 Inch Stroke Length Sensor 191.00 Enter qty: EP2D-006 Start/Stop Output - 6 Inch Stroke Length Sensor 200.00 Enter qty: EP2D-009 Start/Stop Output - 9 Inch Stroke Length Sensor 210.00 Enter qty: EP2D-012 Start/Stop Output - 12 Inch Stroke Length Sensor 217.00 Enter qty: EP2D-015 Start/Stop Output - 15 Inch Stroke Length Sensor 227.00 Enter qty: EP2D-018 Start/Stop Output -18 Inch Stroke Length Sensor 236.00 Enter qty: EP2D-021 Start/Stop Output - 21 Inch Stroke Length Sensor 247.00 Enter qty: EP2D-024 Start/Stop Output - 24 Inch Stroke Length Sensor 258.00 Enter qty: EP2D-030 Start/Stop Output - 30 Inch Stroke Length Sensor 271.00 Enter qty: EP2D-036 Start/Stop Output - 36 Inch Stroke Length Sensor 285.00 Enter qty: EP2D-042 Start/Stop Output - 42 Inch Stroke Length Sensor 302.00 Enter qty: EP2D-048 Start/Stop Output - 48 Inch Stroke Length Sensor 312.00 Enter qty: EP2D-054 Start/Stop Output - 54 Inch Stroke Length Sensor 340.00 Enter qty: EP2D-060 Start/Stop Output - 60 Inch Stroke Length Sensor 372.00 Enter qty: 252887 Floating Block Magnet, Style L for EP2 Sensor (one included with sensor purchase) 27.00 Enter qty: Sensors usually ship in 4-6 weeks, FOB: Culver City, CA. This page last modified on 3/10/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",28);arrFiles[72]=new Array(73,"HTML/MTS-E-Series-Accessories.php","","West Coast Plastics - MTS Temposonics Magnets, Cables &amp; Connectors","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search MTS Temposonics E-Series Accessories Magnets, Connectors, Cordsets, Adaper Cables &amp; Mounting Hardware MAGNETS Part No. Function/Notes Price Order Quantity 201542-2 4 mounting holes 30.00 Enter qty: 251416-2 Style M floating magnet, 2 mounting holes 30.00 Enter qty: 400533 No mounting holes, usually retained in counterbore 33.00 Enter qty: 253572 No mounting holes, for EH Sensors with 7mm diameter rod 33.00 Enter qty: 400633 Non-ferrous, (aluminum), used with 201542-2 9.00 Enter qty: 252182 Style S, ball joint on top 58.00 Enter qty: 252184 Style V, ball joint on front 58.00 Enter qty: 251447 Used to measure liquid level 116.00 Enter qty: 252887 2 mounting holes 27.00 Enter qty: M12 FIELD INSTALLABLE CONNECTORS Part No. Description Price Order Quantity 370618 M-12, 5-pin female connector, straight exit, field installable 39.00 Enter qty: 370619 M-12, 5-pin female connector, 90 degree exit, field installable 39.00 Enter qty: 370671 M-12, 8-pin female connector, straight exit, field installable 67.00 Enter qty: 370672 M-12, 8-pin female connector, 90 degree exit, field installable 67.00 Enter qty: M12 CORDSETS Part No. Description Price Order Quantity 370673 M-12, 5-pin female connector, straight exit, 5-meter cable, PUR jacket, shielded, pigtail end 92.00 Enter qty: 370675 M-12, 5-pin female connector, 90 degree exit, 5-meter cable, PUR jacket, shielded, pigtail end 92.00 Enter qty: 370674 M-12, 8-pin female connector, straight exit, 5-meter cable, PUR jacket, shielded, pigtail end 112.00 Enter qty: 370676 M-12, 8-pin female connector, 90 degree exit, 5-meter cable, PUR jacket, shielded, pigtail end 112.00 Enter qty: M12 ADAPTER CABLES Part No. Description Price Order Quantity 254257 M-12, 5-pin female connector to 6-pin male D60 (M16) connector, 300 mm cable 127.00 Enter qty: 254258 M12, 8-pin female connector to 6-pin male D60 (M16) connector, 300 mm cable 184.00 Enter qty: 254259 M12, 5-pin female connector to old 8-pin male AMP connector, 7 ft. cable 138.00 Enter qty: 254261 M12, 8-pin female connector to old 8-pin male AMP connector, 7 ft. cable 195.00 Enter qty: MOUNTING HARDWARE Part No. Description Price Order Quantity 403508 Mounting Clamp (foot) for E-Series Sensors 6.00 Enter qty: 403606 Mounting Clamp (retrofit version for old special mounting foot 400867) for E-Series Sensors 8.00 Enter qty: 254235 Rod End Assembly for ER Sensors - 1/4-28 threads for standard (inches) units - includes washer &amp; nut 39.00 Enter qty: 254210 Rod End Assembly for ER Sensors - M6 threads for metric (mm) units - includes washer &amp; nut 39.00 Enter qty: 251975 Stud End Kit for ER Sensors 23.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 9/26/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",43);arrFiles[73]=new Array(74,"HTML/MTS-Acc-Connectors.php","","West Coast Plastics - MTS Temposonics Magnets, Cables &amp; Connectors","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search MTS Temposonics Accessories Connectors Part No. Description Function/Notes Price Order Quantity 400755-3 Field-Installable Connector Mates with sensor with RB connector or previous RC design 47.00 Enter qty: 370160 10-Pin Male MS Connector Mates with connector Part No. 370013 for use in retrofitting Temposonics II sensors and bybassing with Digital Interface Box (DIB) 50.00 Enter qty: 370015 6-Pin Female MS Connector Mates to J2 of the Analog Output Module (AOM) or Digital Interface Box (DIB) 42.00 Enter qty: 370018 6-Pin Male MS Connector Mates with connector Part No. 370015 42.00 Enter qty: 370017 5-Pin Female MS Connector Mates to J1 connector of Analog Output Module (AOM) 22.00 Enter qty: 370030 Connector Clamp Required for connector Part Numbers 370015, 370017 and 370018 10.00 Enter qty: 401366 RG Field-Installable Connector Female, straight exit 75.00 Enter qty: 370375 D51 Field-Installable Connector Female, straight exit, for model R-Series sensors with DeviceNet output 45.00 Enter qty: 370376 D51 Field-Installable Connector Female, 90&deg; exit, for model R-Series sensors with DeviceNet output 56.00 Enter qty: 560700 D6 Field-Installable Connector Female, straight exit, mates to D60 connection type on R-Series, G-Seires &amp; E-Series sensors with six conductor cable (STC09131D) 33.00 Enter qty: 560778 D6 Field-Installable Connector Female, 90&deg; exit, mates to D60 &amp; Profibus D63 connection type on R-Series, G-Series &amp; E-Series sensors with six conductor cable (STC09131-6) 47.00 Enter qty: 560701 D7 Field-Installable Connector Female, straight exit, mates to D70 connection type on R-Series SSI sensors. PG7 size strain relief. 33.00 Enter qty: 560779 D7 Field-Installable Connector Female, 90&deg; exit, mates to D70 connection type on R-Series sensors (STC09131-7) 51.00 Enter qty: 370391 D8 Field-Installable Connector Female, straight exit, mates to D80 connection type on model L Series 33.00 Enter qty: 370427 D6 Field-Installable Connector Male, for Profibus sensors w/PG9 strain relief (D63 connection type) (STC09131H06PG9) 47.00 Enter qty: 370423 D6 Field-Installable Connector Female, for Profibus sensors w/PG9 strain relief (D63 connection type). Also used to retrofit 10 conductor Tempo II extension cables (STC09131D06PG9) 47.00 Enter qty: 401327 RC to RB Connector Adapter For retrofitting existing  \'FC \' style Temposonics II or LH position sensors 69.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 3/23/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",28);arrFiles[74]=new Array(75,"HTML/MTS-Acc-Magnets.php","","West Coast Plastics - MTS Temposonics Magnets, Cables &amp; Connectors","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search MTS Temposonics Accessories Magnets &amp; Floats Part No. Description Size Function/Notes Price Order Quantity 201542-2* Standard Ring Magnet 1.29 in O.D. x 0.53 in I.D. x 0.31 in W 4 mounting holes 30.00 Enter qty: 251416-2* Standard Open Ring Magnet 1.29 in O.D. x 0.53 in I.D. x 0.31 in W Style M floating magnet, 2 mounting holes 30.00 Enter qty: 201554 Large Ring Magnet 2.49 in O.D. x 0.75 in I.D. x 0.38 in W 4 mounting holes 44.00 Enter qty: 201553 Large Open Ring Magnet 2.49 in O.D. x 0.63 in I.D. x 0.38 in W 2 mounting holes 44.00 Enter qty: 400533 Small Ring Magnet 1.0 in O.D. x 0.53 in I.D. x 0.31 in W No mounting holes, usually retained in counterbore 33.00 Enter qty: 401032 Small Ring Magnet 0.69 in O.D. x 0.56 in I.D. x 0.13 in W No mounting holes, usually retained in counterbore 33.00 Enter qty: 401467 Large Ring Magnet 1.2 in O.D. x 0.95 in I.D. x 0.13 in W No mounting holes, usually retained in counterbore 32.00 Enter qty: 401468 Large Ring Magnet 1.5 in O.D. x 1.3 in I.D. x 0.43 in W No mounting holes, usually retained in counterbore 32.00 Enter qty: 400633 Magnet Spacer 1.25 in O.D. x 0.56 in I.D. x 0.13 in W Non-ferrous, (aluminum), used with 201542-2 9.00 Enter qty: 252182** Captive-Sliding Magnet n/a Style S, ball joint on top 58.00 Enter qty: 252183** Captive-Sliding Magnet n/a Same as 252182 with extended threaded stud 58.00 Enter qty: 252184** Captive-Sliding Magnet n/a Style V, ball joint on front 58.00 Enter qty: 251298-2 Bar Magnet*** 1.1 in W x 0.8 in H x 0.3 in TH 2 mounting holes 42.00 Enter qty: 251447 Magnet Float 2.0 in spherical O.D. Used to measure liquid level 116.00 Enter qty: 252887 Block Magnet Type L 1.22 in W x 0.8 in H x 0.53 in TH 2 mounting holes 27.00 Enter qty: * 201542-2 and 251416-2 are new fit, form, function replacements for 201542 and 251416 ** Older part 252110-1 has been replaced by 252182 or 252183. Older part 252111-1 has been replaced by 252184. *** Consult Applications Engineering when using the bar magnet, 251298-2. Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 3/23/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",28);arrFiles[75]=new Array(76,"HTML/MTS-Acc-Cables.php","","MTS Temposonics Extension Cables - Equipment from West Coast Plastics","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Temposonics Extension Cables Standard 6-pin DIN Connector Type (D60) Used with R-Series, G-Series and E-Series Sensors MTS Temposonics Series Extension Cables Ordering To order, complete the code number below by selecting the options desired in each category. Then click the submit button. The part number and price will be displayed on the next page. D __ __ __ __ __ __ __ 1 2 3 4 5 6 7 8 1-2. Sensor Connection Type D6 = Female connector, (straight exit), and standard # 530026 cable (PVC jacket) for sensors with D6 or D60 connector. 60.00 DA = Female connector, (90&deg; exit), and standard # 530026 cable (PVC jacket) for sensors with D6 or D60 connector. 73.00 DJ = Female connector, (straight exit), &amp; # 530045 cable, (black polyurethane jacket for higher resistance to moisture and oil), for sensors with D6 or D60 connector. 60.00 DK = Female connector, (90&deg; exit), and # 530045 cable, (black polyurethane jacket for higher resistance to moisture and oil), for sensors with D6 or D60 connector. 73.00 3 - 5. Cable Lengths - For standard length cables up to 100 ft. add: For Sensor Connection Types: D6 or DA DJ or DK 005 = 5 ft. 12.00 29.00 015 = 15 ft. 36.00 87.00 025 = 25 ft. 60.00 145.00 050 = 50 ft. 120.00 290.00 100 = 100 ft. 240.00 580.00 6 - 8. Cable Termination - (2 or 3 characters depending on option selected) P0 = Pigtail connection, (no connector) N/C D6M = D6 male connector, (straight exit). Only available with the D6 option above. 73.00 D6F = Female connector, (straight exit). Only available with the D6 option above. 73.00 DAF = Female connector, (90&deg; exit). Only available with the DA option. 73.00 Temposonics Extension Cables usually ship in 2-3 weeks, FOB: Culver City, CA. This page last modified on 3/10/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",18);arrFiles[76]=new Array(77,"HTML/MTS-Acc-Mounting-Hdwe.php","","West Coast Plastics - MTS Temposonics Magnets, Cables &amp; Connectors","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search MTS Temposonics Accessories Mounting Hardware and Power Supplies Part No. Description Function/Notes Price Order Quantity 401603 Joint Rod Sleeve (1 in.) For use with model RP, GP or EP sensors with S or V style magnet 41.00 Enter qty: 401913* Ball-Jointed Arm, Straight For use with model RP, GP or EP sensors with S or V style magnet 25.00 Enter qty: 561255 Rod End Attachment (Metric) Male M6 for use with model ER sensors 49.00 Enter qty: 560444 Rod End Attachment (English) Male 1/4-28 for use with model ER sensors 39.00 Enter qty: 251975 Stud End Attachment Male 1/4-28 for use with model ER sensors 23.00 Enter qty: 400802 Mounting Feet, Standard For use with model RP, GP, EP, ER and EP2 sensors 12.00 (pair) Enter qty: 400867 Mounting Feet, Low-profile For use with model RP, GP, EP, ER, and EP2 sensors 14.00 (pair) Enter qty: 560357 Magnet Mounting Screws Used to mount standard ring magnet Part No. 201542-2 (4 req.) or open ring magnet Part No. 251416-2 (2 req.) 2.00 (each) Enter qty: 560315 O-Ring for hex flange, 3/4-16 UNF Spare, for use with rod-style sensor models RH &amp; GH with style T or S housing 2.00 Enter qty: 380009 Sensor Power Supply Standard power supply (110 Vac to 24 Vdc/0.5 A) for use with sensors and interface products 147.00 Enter qty: * Was Part No. 401600-1 Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 3/23/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",21);arrFiles[77]=new Array(78,"HTML/MTS-Acc-Sensor-Prog.php","","West Coast Plastics - MTS Temposonics Magnets, Cables &amp; Connectors","West Coast Plastics, MTS, Temposonics, LVDT, linear displacement, transducer, injection molding, position sensor, magnetostriction, linear pot, potentiometer","West Coast Plastics offers Linear Transducers from MTS Temposonics. Using the unique magnetostriction technology, that MTS pioneered, they are highly repeatable, highly accurate, absolute position sensors for linear measurement.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search MTS Temposonics Accessories Sensor Programming Tools Part No. Description Function/Notes Price Order Quantity 253124 R-Series Analog Hand Held Programmer For adjusting null (setpoint 1) and span (setpoint 2) on R-Series analog sensors, (1 magnet) 39.00 Enter qty: 253309-1 R-Series Analog PC programming kit Interface converter box, power supply, PC software and cabling 227.00 Enter qty: 253310-1 R-Series SSI PC programming kit Interface converter box, power supply, PC software and cabling 227.00 Enter qty: 252173-D63 R-Series Profibus node address programmer For field address programming of R-Series Profibus output (for D63 connection type) 314.00 Enter qty: 252173-D53 R-Series Profibus node address programmer For field address programming of R-Series Profibus output (for D53 connection type) 314.00 Enter qty: 252382-D62 R-Series CANbus node address programmer For field address programming of R-Series CANbus output (for D62 connection type) 314.00 Enter qty: 253853 G-Series Analog Hand Held Programmer For adjusting null (setpoint 1) and span (setpoint 2) on G-Series analog sensors 89.00 Enter qty: 253311-1 G-Series Analog PC Programming Kit Interface converter box, power supply, PC software and cabling 227.00 Enter qty: 253312-1 G-Series Digital Pulse PC Programming Kit Interface converter box, power supply, PC software and cabling 227.00 Enter qty: 401727 R-Series Profibus Master Simulator PC Software &amp; UART Use to check functions &amp; change slave address. Shows magnet position &amp; dignostic data. 689.00 Enter qty: 551033 G-Series Documentation and Software CD Includes G-Series PC setup software (part no. 625060)* G-Series Palm OS software (part no. 625061)*. G-Series User \'s Manual part no. 550966 and additional documentation 20.00 Enter qty: 551052 R-Series Documentation and Software CD Includes R-Series PC setup software (part no. 625064)*, parameter files and product documentation 20.00 Enter qty: *Download software at no charge from the website www.mtssensors.com Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 3/10/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",23);arrFiles[78]=new Array(79,"HTML/terms-conditions.php","","About West Coast Plastics Equipment","","West Coast Plastics Equipment supplies the plastics, injection molding, packaging and related industries. Featuring Watlow heaters, sensors and controls, MTS Temposonics position transducers, Price-Driscoll mold releases and many fine lines of sealers an","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search TERMS AND CONDITIONS BUSINESS HOURS - Open from 8:00 a.m. to 5:00 p.m. Pacific Standard Time, Monday through Friday. SHIPMENT - Orders are normally shipped via UPS, FOB: Origin. Items that do not qualify for UPS shipping will be sent via mutually arranged carrier. Shipping costs are not included in listed prices. A 2.00 delivery surcharge and handling charge will be added to each order. Title to items being purchased passes from West Coast Plastics Equipment (WCPE) to purchaser at time of shipment. WCPE retains a security interest in the items until said items are paid for by the purchaser. If your shipment arrives damaged, you must note the damage on the carrier&rsquo;s delivery record in accordance with the carrier&rsquo;s policy, save the merchandise in the original box and packing it arrived in and notify WCPE immediately to arrange for a carrier inspection and/or pickup of damaged merchandise. If you do not notify WCPE of damaged goods within the first 10 days of arrival, WCPE cannot be liable for damage or replacement. PAYMENT TERMS - All items ordered on the WestCoastPlastics.com website shall be prepaid by credit card unless an open account has been established in advance. For your convenience, Visa, Master Card, Discover and American Express are accepted by West Coast Plastics Equipment. To open account, please download our Credit Application and submit it by fax or email prior to placing your order. We will contact you upon establishment of open account. Our terms for open account orders are Net 30 Days. PRICING - Prices are subject to change without advance notice. West Coast Plastics Equipment, Inc. will honor all prices listed on the WestCoastPlastics.com website at the time the order is placed with the exception of typographical errors and non-updated price changes. In these cases, WCPE reserves the right to cancel the order by notice to the buyer without penalty or liability. RETURNS AND RESTOCKING CHARGES - Prior approval and a return authorization number must be obtained from WCPE to return any product. All returns subject to examination and inspection by WCPE or the manufacturer prior to the issuance of credit or replacement.All returns for credit must be returned within 90 days of purchase. If the product has a manufacturing defect, WCPE may issue a credit for the returned product or repair or replace with like product. If the returned product is not subject to manufacturer \'s warranty, buyer will be notified of the estimated repair cost, if possible, then buyer must advise whether or not buyer chooses to have product repaired at buyers expense. WARRANTY and LIMITATION OF LIABILITY - WCPE passes through to its customers all manufacturer warranties and guarantees that are provided for the products it sells. WCPE makes no additional or independent warranties unless expressly stated prior to purchase. WCPE shall under no circumstance be liable for special, incidental or consequential damages. Please clarify the warranty policy prior to your purchase. Refer to the express written warranty time period for each individual product for such warranty time period information. WCPE must be notified of the failure of product within thirty (30) days of such event and a return authorization for repair or replacements must be obtained prior to return of item. CANCELLATION CHARGES - There will be no cancellation charge for non-modified stock products, if cancelled prior to shipment. If cancelled after shipment, restocking charges may apply per Returns and Restocking Charges section above. Non-stock and modified-stock products may be subject to non-cancellation or to cancellation charges to be determined by WCPE &amp; the manufacturer based upon the portion of the product completed at the time of such cancellation. QUANTITY VARIATIONS - On orders for products carried in stock, WCPE will deliver the ordered quantity specified. However for the manufacture of certain non-stock and custom products it is agreed that the manufacturer will be allowed productions losses. The manufacturer shall have the right to manufacture and deliver and invoice for deliveries of up to &plusmn;10% based upon product ordered. Please contact WCPE to clarify quantity variation policies. AVAILABILITY - The availability of products shown on the WestCoastPlastics.com website are estimates. Anticipated delivery dates are based upon vendor supplied information and are subject to change. WCPE and the manufacturers will make every effort to deliver product within the estimated time, however, WCPE will incur no liability for late delivery. Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",12);arrFiles[79]=new Array(80,"HTML/catalogreq.php","","West Coast Plastics - Catalog &amp; Brochure Request Form","","","West Coast Plastics Equipment WestCoastPlastics.com Catalog &amp; Brochure Request Form Name** Company** Address 1** (no PO boxes) Address 2 City, State** Zip/Postal Code** Country Due to postage costs we can only send catalogs to the USA. Phone Email** ** Required information. Comments Catalog / Brochure Requested 2011 Sealers Catalog Watlow Heaters Watlow Sensors &amp; Controllers MTS Temposonics Transducers Price-Driscoll Mold Releases Other Info Needed: Please have a sales rep call me I would like a demo Return to WestCoastPlastics.com Home Page ",4);arrFiles[80]=new Array(81,"HTML/Fenwal-17100-Thermoswitch.php","","Fenwal Series 17100 Thermoswitch Temperature Controllers - Equipment from West Coast Plastics","West Coast Plastics, Fenwal, Kidde-Fenwal, 17102-0 thermostat, 17100-0 thermoswitch, temperature controller","West Coast Plastics offers Fenwal Series 17100 Thermoswitch temperature controllers. Cartridge style mechanical thermostats with an adjustable temperature set point.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Thermoswitch Controllers Series 17100 - Hex Head Style The Fenwal Thermoswitch Temperature Controller is a 5/8 or 3/4 diameter hex head cartridge-style mechanical thermostat with an adjustable temperature set point. The Series 17100 has all the features of the Cartridge type above plus the addition of a standard 1/2 NPT pipe thread for mounting purposes, except for the 17152 which has a 3/4 NPT pipe thread fitting. The 47102 is a .625 diameter thermoswitch that is UL recognized. Principle of Operation: The Fenwal Thermoswitch controller is a strut-and-tube type thermostat comprised of two basic parts: the outer shell, made of high-expanding metal and the strut assembly made of low-expanding metal. A pair of electrical contacts is mounted on the strut assembly and installed in the shell under tension. The temperature at which the contacts make or break can be regulated by a temperature adjusting sleeve. Fast Response: Because the outer shell of the Thermoswitch controller is the active sensing member, and not merely a housing, response to temperature change is almost instantaneous. Close Control: The controller \'s shell and strut arrangement has anticipation characteristics which substantially reduce the amount of overshoot and undershoot during conditions of rapid temperature change. Extreme Sensitivity: The strut and contact assembly operates by slow make and break. This means that every temperature change, no matter how small, causes a corresponding change in the space between the electrical contacts. Therefore, contact action can be produced by a very small temperature change, which accounts for the Thermoswitch controller \'s excellent resolution os 0.1&ordm;F (0.05&ordm;C). Agency Approval: Various models are listed to component recognized by Underwriters Laboratories (UL) and certified by the Canadian Standards Association (CSA). Specifications &amp; Options: Shell dimensions: 5/8 or 3/4 diameter, 3-9/16 long (3 long on units with threads) Standard lead wire: 8-10 inches Maximum volts: 240VAC / Vdc consult factory Maximum watts: 1200 AC / Vdc consult factory Maximum operating temperature: 600&ordm;F / 260&ordm;C Minimum operating temperature: -100&ordm;F / -73&ordm;C Contact action: slow make and break Options (call for pricing and applicability to specific models): Special Marking Extended Lead Wires Factory Temperature Setting Temperature Restraining Device Tamper-Proof Cap Dial and Knob Moisture Resistant Seal &amp; Moisture Resistant Tamper Proof Cap Armored Cable (over lead wires) Terminal Plug Connector Extended Temperature Adjusting Sleeve Protective Wells Download Fenwal Thermoswitch Datasheet (pdf 700K) Part No. Description Diameter Temp. Range Contact Operation on Temp Rise Shell Material Price Order Quantity 01-017100-000 Fenwal Hex Head Thermoswitch 5/8 -100 to 400&ordm;F Opens Brass 166.00 Enter qty: 01-017121-000 Fenwal Hex Head Thermoswitch 5/8 -100 to 400&ordm;F Closes Brass 166.00 Enter qty: 01-017102-000 Fenwal Hex Head Thermoswitch 5/8 -100 to 600&ordm;F Opens 300SS 194.00 Enter qty: 01-017123-000 Fenwal Hex Head Thermoswitch 5/8 -100 to 600&ordm;F Closes 300SS 194.00 Enter qty: 01-017152-000 Fenwal Hex Head Thermoswitch 3/4 -100 to 600&ordm;F Opens 300SS 214.00 Enter qty: 01-047102-000 Fenwal Hex Head Thermoswitch U/L Recognized 5/8 -100 to 600&ordm;F Opens 300SS 202.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 12/17/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",22);arrFiles[81]=new Array(82,"HTML/Fenwal-17000-Thermoswitch.php","","Fenwal Series 17000 Thermoswitch Temperature Controllers - Equipment from West Coast Plastics","West Coast Plastics, Fenwal, Kidde-Fenwal, 17002-0 thermostat, 17000-0 thermoswitch, temperature controller","West Coast Plastics offers Fenwal Series 17000 Thermoswitch temperature controllers. Cartridge style mechanical thermostats with an adjustable temperature set point.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Thermoswitch Controllers Series 17000 - Cartridge Style The Fenwal Thermoswitch Temperature Controller is a 5/8 or 3/4 diameter cartridge-style mechanical thermostat with an adjustable temperature set point. The Series 17000 is thebase of all Thermoswitch controllers. This unit can be inserted into a .625 in. reamed hole, except for the 17052 which can be inserted into a .750 reamed hole. The 47000 Series are .625 diameter thermoswitches that are UL recognized. Lightweight and compact, these units are economical temperature controllers or stand-alone high or low limit controllers. The Thermoswitch controllers control temperatures as low as -100&ordm;F and as high as 1100&ordm;F with the proven dependability of over 60 years of service to satisfied customers. Principle of Operation: The Fenwal Thermoswitch controller is a strut-and-tube type thermostat comprised of two basic parts: the outer shell, made of high-expanding metal and the strut assembly made of low-expanding metal. A pair of electrical contacts is mounted on the strut assembly and installed in the shell under tension. The temperature at which the contacts make or break can be regulated by a temperature adjusting sleeve. Fast Response: Because the outer shell of the Thermoswitch controller is the active sensing member, and not merely a housing, response to temperature change is almost instantaneous. Close Control: The controller \'s shell and strut arrangement has anticipation characteristics which substantially reduce the amount of overshoot and undershoot during conditions of rapid temperature change. Extreme Sensitivity: The strut and contact assembly operates by slow make and break. This means that every temperature change, no matter how small, causes a corresponding change in the space between the electrical contacts. Therefore, contact action can be produced by a very small temperature change, which accounts for the Thermoswitch controller \'s excellent resolution os 0.1&ordm;F (0.05&ordm;C). Agency Approval: Various models are listed to component recognized by Underwriters Laboratories (UL) and certified by the Canadian Standards Association (CSA). Specifications &amp; Options: Shell dimensions: 5/8 or 3/4 diameter, 3-9/16 long (3 long on units with threads) Standard lead wire: 8-10 inches Maximum volts: 240VAC / Vdc consult factory Maximum watts: 1200 AC / Vdc consult factory Maximum operating temperature: 600&ordm;F / 260&ordm;C Minimum operating temperature: -100&ordm;F / -73&ordm;C Contact action: slow make and break Options (call for pricing and applicability to specific models): Special Marking Extended Lead Wires Factory Temperature Setting Temperature Restraining Device Tamper-Proof Cap Dial and Knob Moisture Resistant Seal &amp; Moisture Resistant Tamper Proof Cap Armored Cable (over lead wires) Terminal Plug Connector Extended Temperature Adjusting Sleeve Protective Wells Download Fenwal Thermoswitch Datasheet (pdf 700K) Part No. Description Diameter Temp. Range Contact Operation on Temp Rise Shell Material Price Order Quantity 01-017000-000 Fenwal Cartridge Thermoswitch 5/8 -100 to 400&ordm;F Opens Brass 128.00 Enter qty: 01-017021-000 Fenwal Cartridge Thermoswitch 5/8 -100 to 400&ordm;F Closes Brass 128.00 Enter qty: 01-017002-000 Fenwal Cartridge Thermoswitch 5/8 -100 to 600&ordm;F Opens 300SS 157.00 Enter qty: 01-017023-000 Fenwal Cartridge Thermoswitch 5/8 -100 to 600&ordm;F Closes 300SS 157.00 Enter qty: 01-017052-000 Fenwal Cartridge Thermoswitch 3/4 -100 to 600&ordm;F Opens 300SS 178.00 Enter qty: 01-047002-000 Fenwal Cartridge Thermoswitch U/L Recognized 5/8 -100 to 600&ordm;F Opens 300SS 162.00 Enter qty: 01-047023-000 Fenwal Cartridge Thermoswitch U/L Recognized 5/8 -100 to 600&ordm;F Closes 300SS 162.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 12/17/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",24);arrFiles[82]=new Array(83,"HTML/Fenwal-17200-Thermoswitch.php","","Fenwal Series 17200 Thermoswitch Temperature Controllers - Equipment from West Coast Plastics","West Coast Plastics, Fenwal, Kidde-Fenwal, 17202-0 thermostat, 17200-0 thermoswitch, temperature controller","West Coast Plastics offers Fenwal Series 17200 Thermoswitch temperature controllers. Cartridge style mechanical thermostats with an adjustable temperature set point.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Thermoswitch Controllers Series 17200 - Block Head Style The Fenwal Thermoswitch Temperature Controller is a 5/8 or 3/4 diameter cartridge-style mechanical thermostat with an adjustable temperature set point. The Series 17200 is a unit that has the same mounting characteristics as the Cartridge Type but is designed so modifications may be included. Principle of Operation: The Fenwal Thermoswitch controller is a strut-and-tube type thermostat comprised of two basic parts: the outer shell, made of high-expanding metal and the strut assembly made of low-expanding metal. A pair of electrical contacts is mounted on the strut assembly and installed in the shell under tension. The temperature at which the contacts make or break can be regulated by a temperature adjusting sleeve. Fast Response: Because the outer shell of the Thermoswitch controller is the active sensing member, and not merely a housing, response to temperature change is almost instantaneous. Close Control: The controller \'s shell and strut arrangement has anticipation characteristics which substantially reduce the amount of overshoot and undershoot during conditions of rapid temperature change. Extreme Sensitivity: The strut and contact assembly operates by slow make and break. This means that every temperature change, no matter how small, causes a corresponding change in the space between the electrical contacts. Therefore, contact action can be produced by a very small temperature change, which accounts for the Thermoswitch controller \'s excellent resolution os 0.1&ordm;F (0.05&ordm;C). Agency Approval: Various models are listed to component recognized by Underwriters Laboratories (UL) and certified by the Canadian Standards Association (CSA). Specifications &amp; Options: Shell dimensions: 5/8 or 3/4 diameter, 3-9/16 long (3 long on units with threads) Standard lead wire: 8-10 inches Maximum volts: 240VAC / Vdc consult factory Maximum watts: 1200 AC / Vdc consult factory Maximum operating temperature: 600&ordm;F / 260&ordm;C Minimum operating temperature: -100&ordm;F / -73&ordm;C Contact action: slow make and break Options (call for pricing and applicability to specific models): Special Marking Extended Lead Wires Factory Temperature Setting Temperature Restraining Device Tamper-Proof Cap Dial and Knob Moisture Resistant Seal &amp; Moisture Resistant Tamper Proof Cap Armored Cable (over lead wires) Terminal Plug Connector Extended Temperature Adjusting Sleeve Protective Wells Download Fenwal Thermoswitch Datasheet (pdf 700K) Part No. Description Diameter Temp. Range Contact Operation on Temp Rise Shell Material Price Order Quantity 01-017200-000 Fenwal Block Head Thermoswitch 5/8 -100 to 400&ordm;F Opens Brass 143.00 Enter qty: 01-017221-000 Fenwal Block Head Thermoswitch 5/8 -100 to 400&ordm;F Closes Brass 143.00 Enter qty: 01-017202-000 Fenwal Block Head Thermoswitch 5/8 -100 to 600&ordm;F Opens 300SS 172.00 Enter qty: 01-017223-000 Fenwal Block Head Thermoswitch 5/8 -100 to 600&ordm;F Closes 300SS 172.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 12/17/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",20);arrFiles[83]=new Array(84,"HTML/Fenwal-17800-Thermoswitch.php","","Fenwal Series 17800 Thermoswitch Temperature Controllers - Equipment from West Coast Plastics","West Coast Plastics, Fenwal, Kidde-Fenwal, 17802-0 thermostat, 17800-0 thermoswitch, temperature controller","West Coast Plastics offers Fenwal Series 17800 Thermoswitch temperature controllers. Cartridge style mechanical thermostats with an adjustable temperature set point.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Thermoswitch Controllers Series 17800 - Junction Box Immersion Style The Fenwal Thermoswitch Temperature Controller is a 5/8 diameter cartridge-style mechanical thermostat with an adjustable temperature set point. The Series 17800 has electric conduit junction box containing terminal block and temperature adjustment dial &amp; knob. Also external 1/2 NPT pipe thread fitting. Principle of Operation: The Fenwal Thermoswitch controller is a strut-and-tube type thermostat comprised of two basic parts: the outer shell, made of high-expanding metal and the strut assembly made of low-expanding metal. A pair of electrical contacts is mounted on the strut assembly and installed in the shell under tension. The temperature at which the contacts make or break can be regulated by a temperature adjusting sleeve. Fast Response: Because the outer shell of the Thermoswitch controller is the active sensing member, and not merely a housing, response to temperature change is almost instantaneous. Close Control: The controller \'s shell and strut arrangement has anticipation characteristics which substantially reduce the amount of overshoot and undershoot during conditions of rapid temperature change. Extreme Sensitivity: The strut and contact assembly operates by slow make and break. This means that every temperature change, no matter how small, causes a corresponding change in the space between the electrical contacts. Therefore, contact action can be produced by a very small temperature change, which accounts for the Thermoswitch controller \'s excellent resolution os 0.1&ordm;F (0.05&ordm;C). Agency Approval: Various models are listed to component recognized by Underwriters Laboratories (UL) and certified by the Canadian Standards Association (CSA). Specifications &amp; Options: Shell dimensions: 5/8 diameter, 3 long Terminal Block for wire connection Maximum volts: 240VAC / Vdc consult factory Maximum watts: 1200 AC / Vdc consult factory Maximum operating temperature: 600&ordm;F / 260&ordm;C Minimum operating temperature: -100&ordm;F / -73&ordm;C Contact action: slow make and break Options (call for pricing and applicability to specific models): Special Marking Extended Lead Wires Factory Temperature Setting Temperature Restraining Device Tamper-Proof Cap Dial and Knob Moisture Resistant Seal &amp; Moisture Resistant Tamper Proof Cap Armored Cable (over lead wires) Terminal Plug Connector Extended Temperature Adjusting Sleeve Protective Wells Download Fenwal Thermoswitch Datasheet (pdf 700K) Part No. Description Diameter Temp. Range Contact Operation on Temp Rise Shell Material Price Order Quantity 01-017800-000 Fenwal Junction Box Immersion Thermoswitch 5/8 -100 to 400&ordm;F Opens Brass 254.00 Enter qty: 01-017821-000 Fenwal Junction Box Immersion Thermoswitch 5/8 -100 to 400&ordm;F Closes Brass 254.00 Enter qty: 01-017802-000 Fenwal Junction Box Immersion Thermoswitch 5/8 -100 to 600&ordm;F Opens 300SS 281.00 Enter qty: 01-017823-000 Fenwal Junction Box Immersion Thermoswitch 5/8 -100 to 600&ordm;F Closes 300SS 281.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 12/17/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",20);arrFiles[84]=new Array(85,"HTML/Fenwal-17300-Thermoswitch.php","","Fenwal Series 17000 Thermoswitch Temperature Controllers - Equipment from West Coast Plastics","West Coast Plastics, Fenwal, Kidde-Fenwal, 17002-0 thermostat, 17000-0 thermoswitch, temperature controller","West Coast Plastics offers Fenwal Series 17000 Thermoswitch temperature controllers. Cartridge style mechanical thermostats with an adjustable temperature set point.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Thermoswitch Controllers Series 17300 - Flange Head Style The Fenwal Thermoswitch Temperature Controller is a 5/8 or 3/4 diameter flange head mechanical thermostat with an adjustable temperature set point. The Series 17300 has all the features of the Block Head Type and also a 3-hole mounting flange . Principle of Operation: The Fenwal Thermoswitch controller is a strut-and-tube type thermostat comprised of two basic parts: the outer shell, made of high-expanding metal and the strut assembly made of low-expanding metal. A pair of electrical contacts is mounted on the strut assembly and installed in the shell under tension. The temperature at which the contacts make or break can be regulated by a temperature adjusting sleeve. Fast Response: Because the outer shell of the Thermoswitch controller is the active sensing member, and not merely a housing, response to temperature change is almost instantaneous. Close Control: The controller \'s shell and strut arrangement has anticipation characteristics which substantially reduce the amount of overshoot and undershoot during conditions of rapid temperature change. Extreme Sensitivity: The strut and contact assembly operates by slow make and break. This means that every temperature change, no matter how small, causes a corresponding change in the space between the electrical contacts. Therefore, contact action can be produced by a very small temperature change, which accounts for the Thermoswitch controller \'s excellent resolution os 0.1&ordm;F (0.05&ordm;C). Agency Approval: Various models are listed to component recognized by Underwriters Laboratories (UL) and certified by the Canadian Standards Association (CSA). Specifications &amp; Options: Shell dimensions: 5/8 or 3/4 diameter, 3-9/16 long (3 long on units with threads) Standard lead wire: 8-10 inches Maximum volts: 240VAC / Vdc consult factory Maximum watts: 1200 AC / Vdc consult factory Maximum operating temperature: 600&ordm;F / 260&ordm;C Minimum operating temperature: -100&ordm;F / -73&ordm;C Contact action: slow make and break Options (call for pricing and applicability to specific models): Special Marking Extended Lead Wires Factory Temperature Setting Temperature Restraining Device Tamper-Proof Cap Dial and Knob Moisture Resistant Seal &amp; Moisture Resistant Tamper Proof Cap Armored Cable (over lead wires) Terminal Plug Connector Extended Temperature Adjusting Sleeve Protective Wells Download Fenwal Thermoswitch Datasheet (pdf 700K) Part No. Description Diameter Temp. Range Contact Operation on Temp Rise Shell Material Price Order Quantity 01-017300-000 Fenwal Flange Head Thermoswitch 5/8 -100 to 400&ordm;F Opens Brass 159.00 Enter qty: 01-017321-000 Fenwal Flange Head Thermoswitch 5/8 -100 to 400&ordm;F Closes Brass 159.00 Enter qty: 01-017302-000 Fenwal Flange Head Thermoswitch 5/8 -100 to 600&ordm;F Opens 300SS 184.00 Enter qty: 01-017323-000 Fenwal Flange Heard Thermoswitch 5/8 -100 to 600&ordm;F Closes 300SS 184.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 12/17/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",19);arrFiles[85]=new Array(86,"HTML/Fenwal-18000-Thermoswitch.php","","Fenwal Series 18000 Thermoswitch Temperature Controllers - Equipment from West Coast Plastics","West Coast Plastics, Fenwal, Kidde-Fenwal, 18002-0 thermostat, 18000-0 thermoswitch, temperature controller","West Coast Plastics offers Fenwal Series 18000 Thermoswitch temperature controllers. Cartridge style mechanical thermostats with an adjustable temperature set point.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Thermoswitch Controllers Series 18000 - Coupling Head The Fenwal Thermoswitch Temperature Controller is a 5/8 or 3/4 diameter cartridge-style mechanical thermostat with an adjustable temperature set point. The Series 18000 has a coupling fitting with standard 1/2 NPT (3/4 NPT on 18052) male pipe threads at each end either of which may be used for mounting. The 48000 Series are .625 diam. thermoswitches that are UL recognized. Corrosion Resistant (Series 18000) - Certain models are designed to be corrosion resistant. Type 316 Stainless Steel is used throughout for corrosion resistance. Principle of Operation: The Fenwal Thermoswitch controller is a strut-and-tube type thermostat comprised of two basic parts: the outer shell, made of high-expanding metal and the strut assembly made of low-expanding metal. A pair of electrical contacts is mounted on the strut assembly and installed in the shell under tension. The temperature at which the contacts make or break can be regulated by a temperature adjusting sleeve. Fast Response: Because the outer shell of the Thermoswitch controller is the active sensing member, and not merely a housing, response to temperature change is almost instantaneous. Close Control: The controller \'s shell and strut arrangement has anticipation characteristics which substantially reduce the amount of overshoot and undershoot during conditions of rapid temperature change. Extreme Sensitivity: The strut and contact assembly operates by slow make and break. This means that every temperature change, no matter how small, causes a corresponding change in the space between the electrical contacts. Therefore, contact action can be produced by a very small temperature change, which accounts for the Thermoswitch controller \'s excellent resolution os 0.1&ordm;F (0.05&ordm;C). Agency Approval: Various models are listed to component recognized by Underwriters Laboratories (UL) and certified by the Canadian Standards Association (CSA). Specifications &amp; Options: Shell dimensions: 5/8 or 3/4 diameter, 3-9/16 long (3 long on units with threads) Standard lead wire: 8-10 inches Maximum volts: 240VAC / Vdc consult factory Maximum watts: 1200 AC / Vdc consult factory Maximum operating temperature: 600&ordm;F / 260&ordm;C Minimum operating temperature: -100&ordm;F / -73&ordm;C Contact action: slow make and break Options (call for pricing and applicability to specific models): Special Marking Extended Lead Wires Factory Temperature Setting Temperature Restraining Device Tamper-Proof Cap Dial and Knob Moisture Resistant Seal &amp; Moisture Resistant Tamper Proof Cap Armored Cable (over lead wires) Terminal Plug Connector Extended Temperature Adjusting Sleeve Protective Wells Download Fenwal Thermoswitch Datasheet (pdf 700K) Part No. Description Diameter Temp. Range Contact Operation on Temp Rise Shell Material Price Order Quantity 01-018000-000 Fenwal Coupling Head Thermoswitch 5/8 -100 to 400&ordm;F Opens Brass 174.00 Enter qty: 01-018021-000 Fenwal Coupling Head Thermoswitch 5/8 -100 to 400&ordm;F Closes Brass 174.00 Enter qty: 01-018002-000 Fenwal Coupling Head Thermoswitch 5/8 -100 to 600&ordm;F Opens 300SS 201.00 Enter qty: 01-018023-000 Fenwal Coupling Head Thermoswitch 5/8 -100 to 600&ordm;F Closes 300SS 201.00 Enter qty: 01-018052-000 Fenwal Coupling Head Thermoswitch 3/4 -100 to 600&ordm;F Opens 300SS 229.00 Enter qty: 01-048002-000 Fenwal Coupling Head Thermoswitch U/L Recognized 5/8 -100 to 600&ordm;F Opens 300SS 208.00 Enter qty: 01-048023-000 Fenwal Coupling Head Thermoswitch U/L Recognized 5/8 -100 to 600&ordm;F Closes 300SS 208.00 Enter qty: 01-180020-029 Fenwal Coupling Head Thermoswitch Corrosion Resistant 5/8 -100 to 500&ordm;F Opens 316SS 225.00 Enter qty: 01-018002-021 Fenwal Coupling Head Thermoswitch Corrosion Resistant 5/8 -100 to 600&ordm;F Opens 316SS 228.00 Enter qty: 01-018023-007 Fenwal Coupling Head Thermoswitch Corrosion Resistant 5/8 -100 to 600&ordm;F Closes 316SS 228.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 12/17/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",27);arrFiles[86]=new Array(87,"HTML/Fenwal-67000-Thermoswitch.php","","Fenwal Series 67000 Midget Thermoswitch Temperature Controllers - Plastics Equipment from West Coast Plastics","thermoswitch, West Coast Plastics, Fenwal, Tempswitch, thermostat, cartridge heater, temperature controllers, 67100-0, Kidde-Fenwal, midget thermoswitch","West Coast Plastics now offers the Fenwal Midget Thermoswitch Temperature Controllers. A mechanical thermostat with an adjustable temperature set point.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Midget Thermoswitch Controllers The Fenwal Series 67000 Midget Thermoswitch Temperature Controllers provide accurate control in limited space applications. These miniature thermostat units operate on a unique differential expansion principle. they need not be heated through before responding to temperature change. Rather, the outer case itself is the activating element. This results in short heat transfer path, built-in temperature anticipation, and inherent thermostat sensitivity of less than 1&ordm;F. If tight spot temperature control in the range of 32 to 500&ordm;F is your problem, a Fenwal Midget Thermoswitch unit is your answer. Specifications: Temperature Range: 32 to 500&ordm;F (0 to 260&ordm;C) Factory Settings Tolerange: &plusmn;10&ordm;F (&plusmn;6&ordm;C) Shell Material: 300 Series Stainless Steel, polish finish Shell Dimensions: 1/4 x 2.25 Download Fenwal Series 67000 Midget Thermoswitch Datasheet (pdf) Fenwal Midget Thermoswitch Temperature Controllers (Temperature Setting is required-we will contact you after you order) Description Model # Contact Operation on Temp Rise Fitting Thread Current Rating 1amp Max. Price Enter Quantity to Order Cartridge Type (Series 67000) - 2 wire, for insertion into a .250 reamed hole. 07-067000-000 Opens -- 120VAC 546.00 Enter qty: Hex Head Type (Series 67100) - 2 wire, with a pipe thread fitting for mounting purposes. 07-067100-000 Opens 1/8-27NPT 120VAC 769.00 Enter qty: 07-067100-001 Opens 3/8-24NF2 120VAC 803.00 Enter qty: 07-067121-000 Closes 1/8-27NPT 120VAC 32VDC 548.00 Enter qty: Triangle Flange Type (Series 67300) - 2 wire, with a 3-hole flange for mounting purposes. 07-067300-000 Opens -- 120VAC 595.00 Enter qty: 07-067321-000 Closes -- 120VAC 32VDC 508.00 Enter qty: Coupling Head Type (Series 68000) - 2 wire, with male pipe threads at each end either of which may be used for mounting. 07-068021-000 Closes 1/8-27NPT 7/16-20NF2 120VAC 32VDC call Enter qty: Items usually ship in 2-4 weeks, FOB: Ashland, MA. This page last modified on 12/17/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",20);arrFiles[87]=new Array(88,"HTML/Fenwal-Thermowell.php","","Fenwal Thermoswitch Protective Thermowells - Equipment from West Coast Plastics","West Coast Plastics, Fenwal, Kidde-Fenwal, 17202-0 thermostat, 17200-0 thermoswitch, temperature controller","West Coast Plastics offers Fenwal Series 17200 Thermoswitch temperature controllers. Cartridge style mechanical thermostats with an adjustable temperature set point.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Thermoswitch Controllers Protective Thermo Wells Fenwal 34-011100-002 Aluminum Surface Mounting Thermowell The Fenwal Thermoswitch Protective Thermowells are for use with Series 17000 Thermoswitch Controllers. In many applications involving the control of liquids and gases, the use of a well is recommended. When the removal of a Hex or Coupling Head Thermoswitch controller would require draining of the container in which it is inserted, the use of a well assembly permits removal of the controller without other disturbances. When surrounding ambients are subject to extreme changes thus affecting Thermoswitch control, the well makes it possible to insert the Thermoswitch controller completely into the medium being controlled thereby eliminating these ambient temperature effects or head effect. A well also offers protection in applications where fluids have a corrosive effect on the brass shell of the Thermoswitch controller. Certain gases or liquids (including water at elevated temperatures) could be corrosive and/or cause electrolytic action, which could severely shorten the life of the controller. Where corrosion or electrolysis is suspect, the use of stainless steel heliarc welded thermowells or various platings or coatings may increase controller life. In addition, use a thermowell to protect the Thermoswitch from external forces or blows which could damage it or affect its operation. Specifications &amp; Options: Shell dimensions: Use with a 5/8 diameter Thermoswitch Controller Pressure Ratings: 100 p.s.i. at -100&ordm;F to +250&ordm;F 60 p.s.i. at +600&ordm;F Approximate Weight: 4 to 5 ounces Download Fenwal Thermowell Datasheet (pdf ) Part No. Specifications Description Applicable Thermoswitch Well &amp; Head Material Price Order Quantity 34-011201-000 Fenwal Hex Head Thermowell Series 170XX 321SS 188.00 Enter qty: 34-011204-000 Fenwal Coupling Head Thermowell Series 170XX 321SS 275.00 Enter qty: 34-011100-002 Fenwal Aluminum Surface Mounting Thermowell Series 170XX Aluminum 151.00 Enter qty: 34-011208-000 Fenwal Low Pressure Hex Head Thermowell Series 172XX and 173XX 321SS 190.00 Enter qty: Items ship in 2-4 weeks, FOB: Ashland, MA. This page last modified on 12/17/2010 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",18);arrFiles[88]=new Array(89,"HTML/Fenwal-30000-Thermostat.php","","Fenwal Surface Mount Thermoswitch Temperature Controllers - Plastics Equipment from West Coast Plastics","thermoswitch, West Coast Plastics, Fenwal, Tempswitch, thermostat, Kidde-Fenwal, temperature controller, surface mount thermostat, 11-030000-000, 11-030000-048, 11-030002-000, 30000-0, 30002-0","West Coast Plastics now offers the Fenwal Surface Mount Thermostat Temperature Controllers. A mechanical thermostat with an adjustable temperature set point.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Surface Mount Thermoswitch Fenwal Series 30000 Surface Mounting Thermoswitch Temperature Controllers are cost effective thermostats designed to provide close control when mounted in contact with a flat surface. Using the principle of differential expansion of metals, a temperature increase causes the stainless steel outer case to expand at a greater rate than the internal bridge assembly. Because the case is in direct contact with the heated surface, a temperature change is sensed almost instantaneously. With an increase in temperature the case expands resulting in a linear change of the internal bridge assembly causing the electrical contacts to open. This turns off the heaters. A decrease in temperature closes the contacts, restoring power to the heaters and turning them on again. FEATURES: Fully adjustable Overlapping Ranges from 50 to 600&ordm;F 1200 Watt Resistive Load Rating at 120/240VAC Current Rating: 10 amps @120VAC, 5 amps @240VAC Narrow Temperature Differential Minimum contact rating of 100,000 cycles Stainless Steel Case &amp; Cover Compact Size UL Component Recognized CSA Certified Download Fenwal Series 30000 Thermostat Datasheet (pdf) Part No. Description Temp. Range Contact Operation on Temp Rise Price Order Quantity 11-30000-000 Fenwal Surface-Mount Adjustable, low temperature thermostat 50 to 300&ordm;F Opens 33.00 Enter qty: 11-30000-048 Fenwal Surface-Mount Adjustable, low temperature thermostat 85 to 250&ordm;F Opens 33.00 Enter qty: 11-30002-000 Fenwal Surface-Mount Adjustable, high temperature thermostat 50 to 600&ordm;F Opens 33.00 Enter qty: NOTE: Price includes aluminum C mounting clamp which is automatically provided with thermostat. Items usually ship in 1-2 days, FOB: Culver City, CA. This page last modified on 5/10/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",16);arrFiles[89]=new Array(90,"HTML/Fenwal-Snap-Disc.php","","Fenwal Quick-Ship Snap Disc Thermostats - Plastics Equipment from West Coast Plastics","snap disc thermostat, thermoswitch, West Coast Plastics, Fenwal, Tempswitch, thermostat, temperature controller, 08-020261, 08-023384, 08-033024, Kidde-Fenwal","West Coast Plastics now offers the Fenwal Quick-Ship Snap Disc Thermostats. Fast acting, rugged, precise temperature control.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Snap Disc Thermostats The Fenwal Snap Disc Thermostat is a rugged, precision thermostat in which a snap acting bimetal disc serves as the actuating element. As the temperature reaches the setpoint, the disc snaps to provide rapid contact action minimizing radio frequency interference and ensuring high reliability. Fenwal \'s snap disc thermostats are individually calibrated to meet both thermal and electrical characteristics. The single contact switch arm assembly minimizes failures due to contact contamination, while the fine silver contacts assure long life and excellent current carrying capacity. Thermostats with fixed mounting brackets are provided with 1/4 quick connect terminals in the opposed-vertical position. Thermostats with movable mounting brackets are provided with 1/4 quick connect terminals in the opposed-horizontal position. FEATURES: Single pole, single throw switch action Available for quick ship - no minimum quantities Current ratings up to 12A @ 240VAC 100,000 cycle rating UL Component recognized CSA Certified Vibration resistant Fixed temperature settings from 100 to 550&ordm;F Download Fenwal Snap Disc Thermostat Datasheet (pdf) Fenwal Snap Disc Thermostat with Fixed Mounting Bracket &amp; Vertical Terminals (left), with Movable Mounting Bracket &amp; Horizontal Terminals (right). Fenwal Snap Disc Thermostat - Ordering Information Part No. Contact Operation on Temp Rise Mounting Bracket Terminals Open Temp &ordm;F Close Temp &ordm;F Price Order Quantity 08-023384-463 Open Fixed Vertical 140 120 29.00 Enter qty: 08-033024-019 Open Fixed Vertical 400 360 46.00 Enter qty: 08-033024-106 Open Fixed Vertical 500 440 50.00 Enter qty: 08-033024-032 Open Fixed Vertical 550 425 50.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. FOB: Culver City, CA. This page last modified on 5/10/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",19);arrFiles[90]=new Array(91,"HTML/Fenwal-20000-Thermoswitch.php","","Fenwal Series 20000 Thermoswitch Temperature Controllers - Equipment from West Coast Plastics","West Coast Plastics, Fenwal, Kidde-Fenwal, 20000-0 thermostat, 20000-0 thermoswitch, temperature controller","West Coast Plastics offers Fenwal Series 20000 Thermoswitch temperature controllers. Cartridge style mechanical thermostats with an adjustable temperature set point.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Thermoswitch Controllers Series 20000, 21000, 22000 - Snap-Action Style NOTICE: This product will be discontinued by Fenwal The last day to order is Dec. 31, 2011! Fenwal Model 23-020310-000 Snap-Action Thermoswitch with skeleton frame housing. Fenwal Model 23-020810-000 Snap-Action Thermoswitch with junction box housing. The Fenwal Snap-Action Style Thermoswitch Temperature Controllers are available with either single or dual switch control. Control action is provided by an expandable liquid acting on a bellows assembly. Bellows motion, created by volume changes of the liquid, actuates the switch contacts through a push rod. High Load Capacity: Current ratings up to 15 amps, 125-250 VAC are available. Fast Response: The expandable liquid, which surrounds the bellows, is in direct contact with the temperature sensing outer shell providing a fast response for accurate temperature control. Adjustable Temperature Ranges: An adjustable screw allows simple temperature adjustment. The switch can be set at any temperature within the controller \'s range. On dual switch units, each switch may be set individually, allowing independent action. Variety of Temperature Ranges: Both single and dual switch models are available with overlapping temperature ranges up to 300&ordm;F . Corrosion Resistance: Certain gases or liquids (including water at elevated tmperatures) could be corrosive and may also cause electrolytic action which could severely shorten the life of the controller. Where corrosion of electrolysis is suspect, plating the brass shell may increase controller life. See Special Feature S.R. 34A. Also, protective wells are available for some models. Because the rate of corrosion or electrolysis is influenced by many systems parameters, such as chemical makeup and temperature of the solution, consult the supplier of our chemicals for suggestions. Specifications: Temperature Limits Sensing bulb Minimum: -100&ordm;F (-75&ordm;C) Maximum: Upper range limit Snap Switch 175&ordm;F (80&ordm;C) maximum Differential Approximately 3.5% of span Pressure Limit 500 psi (3.45 MPa) Pressure Effect Set point decreases 1F&ordm; per 100 psi applied pressure Current Rating 15.0 A 125-250 VAC 0.50A 125 VDC 0.25A 250 VDC AC Contactor Size - up to size #1 Junction Box Finish Type 208, 227, 228; Baked Gray Enamel Type 210, 211: Zinc Plate Download Fenwal Snap Action Thermoswitch Datasheet (pdf ) Model No. Housing Mounting Temp. Range Controls Price Order Quantity 23-020100-000 Skeleton Frame Immersion Fitting 100 to 300&ordm;F Single Switch 225.00 Enter qty: 23-020110-000 Skeleton Frame Immersion Fitting 25 to 225&ordm;F Single Switch 225.00 Enter qty: 23-020300-000 Skeleton Frame Flange 100 to 300&ordm;F Single Switch 197.00 Enter qty: 23-020310-000 Skeleton Frame Flange 25 to 225&ordm;F Single Switch 197.00 Enter qty: 23-020800-000 Junction Box - Not Drip Proof Immersion Fitting 100 to 300&ordm;F Single Switch 289.00 Enter qty: 23-020810-000 Junction Box - Not Drip Proof Immersion Fitting 25 to 225&ordm;F Single Switch 289.00 Enter qty: 23-021000-000 Junction Box - Drip Proof Flange 50 to 300&ordm;F Single Switch 382.00 Enter qty: 23-021010-000 Junction Box - Drip Proof Flange 0 to 250&ordm;F Single Switch 382.00 Enter qty: 23-021100-000 Junction Box - Drip Proof Immersion Fitting 50 to 300&ordm;F Single Switch 370.00 Enter qty: 23-021110-000 Junction Box - Drip Proof Immersion Fitting 0 to 250&ordm;F Single Switch 370.00 Enter qty: 23-022700-000 Junction Box - Not Drip Proof None 100 to 300&ordm;F Dual Switch 336.00 Enter qty: 23-022710-000 Junction Box - Not Drip Proof None 25 to 225&ordm;F Dual Switch 336.00 Enter qty: 23-022800-000 Junction Box - Not Drip Proof Immersion Fitting 100 to 300&ordm;F Dual Switch 364.00 Enter qty: 23-022810-000 Junction Box - Not Drip Proof Immersion Fitting 25 to 225&ordm;F Dual Switch 364.00 Enter qty: Some items in stock. Out-of-stock items take 1-3 weeks. Please call for availability. This page last modified on 10/4/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",31);arrFiles[91]=new Array(92,"HTML/Partlow-MRC5000-Specs.pdf","30 Jul 2009","Partlow-MRC5000-Specs","","","Data Sheet  Recorders  1 & 2 Pen Digital Chart Recorder  DESCRIPTION Designed with the latest innovations in recording technology, enclosures and functionality, the MRC 5000 is slim, trim and simple. The MRC 5000 is a digital circle chart recorder capable of measuring, recording and controlling up to two process variables from a variety of inputs. Finding a place to install this recorder is easy, with its compact panel depth and short protrusion from the front panel. The mode switch, located next to the display, provides two functions. When in the PROG/ CAL/TEST position, it provides access to program parameters, calibration facilities and test functions. Hardware options are matrix selectable and are shipped with default settings. The MRC 5000 directly connects to either thermocouple, RTD, mVDC, VDC, or mADC inputs. Changes in input type are easily accomplished in the field through programming. This instrument has a universal power supply, 90­264VAC line voltage at 50­60Hz.  MRC 5000TM  Slim...Trim...Simple for Basic Digital Recording At Its Best!  APPLICATIONS:  Ideal for basic digital recording applications with shallow depth panel requirements. · Process Validation · Trend Analysis · Regulatory Compliance · Product Safety - Temperature - pH Level  INDUSTRIES  Oven, chamber, furnaces, heat treating, food processing, harsh water environments FEATURES/BENEFITS · Easy and simple in every aspect of operation: programming, testing and calibration · Standard easy read display saves setup time, ensures proper configuration and allows for field calibration · Completely assembled slim/trim design--no assembly required--reduces your panel depth and saves you money · Wide range of power operation · More standard input selections, time rotations and optional features · Value priced basic recording  Customer Service +1 800.390.6405 Technical Support +1 800.866.6659 www.partlow.com · www.danaherindustrialcontrols.com  Process Automation Worldwide Brands: LFETM · PartlowTM · PMATM · RustrakTM · WestTM  Recorders  MRC 5000TM  1 & 2 Pen Digital Chart Recorder Hollowshaft, Incremental Encoders  SPECIFICATIONS  STANDARD FEATURES  Functionality: Record only or high/low limit and record/control. Display: 4 digit; 0.56 high, red, seven segment LED, 3 button keypad. Modes: Program, Calibrate, Test and Run; Normal/Display or blank. Status Indicators: Four red LED alarm status indicators; one green LED pen 2 indicator. Chart: 10 circular chart; 100 charts furnished with each instrument. Unless otherwise specified, charts shipped with instrument are 0­100 range. 24 hour rotation default setting. Chart Drive: DC Stepper Motor. Chart Rotation: User-configurable: 8 hrs, 12 hrs, 24 hrs, 48 hrs or 7 days. Chart Range: Bottom and top of span ­9999 to 9999 units. Pen Type: One or two disposable fiber tip pen. Pen Color: Pen 1 (red); Pen 2 (green). Memory Backup: Non-volatile EEPROM for configuration parameters, calibration and alarm setpoint data. Construction/Enclosure: Injection molded Noryl case; acrylic window cover.  Slim...Trim...Simple for Basic Digital Recording At Its Best!  INPUTS  Thermocouple: J, K, T, R, S. RTD: 100 ohm, platinum; 0.00385 ohms/ohm/°C. Volts: 0­10 VDC. DC Millivolts: 0­25mV, 0 to 50mV; 10­50mV, 0­ 5V and 1­5V. DC Milliamps: 0­20mA; 4­20mA; internal 4.7 ohm shunt resistor.resistor. Impedance: >100M ohms for TC and mV inputs; 100K ohms for 5V inputs; 4.7 ohms for mA inputs. RTD Excitation Current: 150 microamps, typical. Input Scan Rate: 1 scan/sec for non-RTD inputs; 1 scan/1.2 sec for RTD inputs.  COMMUNICATIONS INTERFACES  Communications Port: RS-485 serial, half duplex. Protocol: MODBUS RTU. Bit Rate: 9600/sec. Parity: Odd. Address: User-configurable, 1­247.  RATINGS/AGENCY APPROVALS  Safety: UL1092, UL916 and QUXY File E67237, CSA Spec 142 File E67237, CE EN61010-1 1993. Immunity: CE EN50082-2:1992. Emissions: EN50081-1:1992 and EN50081-2:1994; EN55022 Class B. Limit Device: FM Approved File J.I.1D8a1.AF (Class 3545). Other: ISO 9002 registered.  PERFORMANCE  GENERAL: Input Measurement Error: Type J, K, T, R, S and RTD ±0.25% of span ±1 degree. mA, mV and VDC: ±0.25% of scaled span plus 1 least significant digit. Ambient Temperature Error: 0.01% of span per degree C deviation from 25°C. Cold Junction Compensation Error: ±0.2°C @ 25°C. Cold Junction Compensation Rejection: ±0.04°/°C deviation from 25°C. Linearization Error: TCs: ±0.25°C typical; ±0.5°C worst case with exceptions. RTDs: ±0.1°C typical; ±0.3°C worst case. Common Mode Rejection: >120dB @50/60Hz; 260VAC max. Normal Mode Rejection: 85dB minimum @ 60Hz or greater. Isolation: Inputs are a common ground signal. Chart Accuracy: Recording: 0.5% of chart span. Chart Rotation: ±0.5% of rotation time.  PROTECTION  NEMA 3 standard; NEMA 4X optional; optional door lock.  PHYSICAL DIMENSIONS  Width: 14 (356mm). Depth: 3.8 (97mm); panel depth: 2.5 (64mm); panel protrusion: 1.3 (33mm). Height: 14 (356mm). Weight: 15 lbs (6.8kg). Mounting/Mounting Position: Panel or wall; up to 30° backward or forward tilt from vertical; up to 10° side tilt from vertical. Retrofit Adaptor Plate: Will fit Partlow MRC7000 and ARC4100 cutouts.  OPERATING CHARACTERISTICS  Operating Temp: 32° to 122°F (0° to 50°C). Storage Temp: ­40° to 149°F (­40° to 65°C). Humidity: 0% to 90% non-condensing R.H. Vibration: 0.3 to 100Hz @ 0.2g.  ELECTRICAL  Power Consumption: 18VA max. Line Voltage: 90­264VAC, 47­63Hz.  OPTIONS/ACCESSORIES  Optional process or High/Low Limit alarms. Optional configuration port. Optional digital communications. Optional adaptor plate for convenient retrofit into MRC7000 and 4100 cutouts. NEMA 4X protection optional.  OUTPUTS  Control Outputs: Relay option; SPDT, contacts rated 5A resistive at 115VAC, 2.5A resistive at 230VAC, 1/8HP at 230VAC (single phase), 250VA at 115/230V. Alarm Outputs: Process high or low; up to two process alarms for each of two inputs.  PROCESS CONTROL  U ®L  LISTED 88BO  WARRANTY  2 years.  Customer Service +1 800.390.6405 Technical Support +1 800.866.6659 www.partlow.com · www.danaherindustrialcontrols.com  Process Automation Worldwide Brands: LFETM · PartlowTM · PMATM · RustrakTM · WestTM  Recorders  MRC 5000TM  1 & 2 Pen Digital Chart Recorder  MODELS  Code 1: Model Code 2: Pen 1 Option Code 3: Pen 2 Option Code 4: Pen 1 Outputs Code 5: Pen 2 Outputs Code 6: Communications Option Code 7: Enclosure Options Code 8: Operating Voltage Code 9: Suffix  Slim...Trim...Simple for Basic Digital Recording At Its Best!  5  MRC5000 Recorder/ Controller 1 Recorder Only 1 One Relay 2 Two Relays 2 Recording Controller* 3 High/Low Limit* 2 Recording Controller* 3 High/Low Limit* 1 Recorder Only 0 None 0 None 0 None 1 One Relay 2 Two Relays 0 Recorder Only 1 Standard- 1 Standard90 to 240VAC NEMA 3 1 Configurator Port 2 Door Lock 2 Low Voltage** 3 Standard Voltage 3 NEMA 4X & Transmitter Power Supply 2 RS-485 3 Configurator Port and RS-485 4 Low Voltage & Transmitter Power Supply 5 CE 6 CE & Low Voltage 7 CE & Standard Voltage & Transmitter Power Supply 8 CE & Low Voltage & Transmitter Power Supply BLANK - None AA Alarms and Communications Connectivity Option (Alows for later field installation of both options)  * Does not include a relay. Order relays in output options. ** Low Voltage is 20-50 VAC or 22-65 VDC  High/Low limit device is Factory Mutual approved.  Recorders  MRC 5000TM  1 & 2 Pen Digital Chart Recorder Hollowshaft, Incremental Encoders  DIMENSIONS  Slim...Trim...Simple for Basic Digital Recording At Its Best!  14.0   (356 mm)  1.3  (33 mm)  2.5  (64 mm)  14.0   (356 mm)  12.70  (322.6 mm)  PANEL CUTOUT  12.70  (322.6 mm)  Made in USA. * Specifications subject to change without notice in accordance with our DBS policy of continuous improvement. All product and brand names are trademarks of their respective companies. All rights reserved. PartlowTM brand and MRC 5000TM are trademarks of Danaher Industrial Controls Group. All rights reserved. © 2005 DICG Corp. Partlow Brand MRC 5000 Data Sheet (5/05) Headquarters: 1675 Delany Road · Gurnee, IL 60031-1282 · USA Phone: +1 847.662.2666 · Fax: +1 847.662.6633 Satellite Locations: North America: North Carolina, South Carolina, Connecticut, Massachusetts, New York, Canada, British Virgin Islands · Europe: United Kingdom, Italy, France, Germany, Spain, Slovakia · Latin America: Brazil · Asia: China, Japan, Korea, Singapore  Customer Service: Tel.: +1.800.390.6405 Fax: +1.910.879.5486 partlow.custserv@dancon.com  Technical Support: Tel.: +1.800.866.6659 Fax: +1.847.782.5277 partlow.techsupport@dancon.com  www.partlow.com · www.danaherindustrialcontrols.com  Process Automation Worldwide Brands: LFETM · PartlowTM · PMATM · RustrakTM · WestTM  ",182);arrFiles[92]=new Array(93,"HTML/Fenwal-Detect-A-Fire.php","","Fenwal Detect-A-Fire Fire Detectors - Plastics Equipment from West Coast Plastics","thermoswitch, West Coast Plastics, Fenwal, Kidde Fenwal, thermostat, fire detector, fire protection, detect-a-fire, fire sensor, 12-E27121-000, 27121-0, 27021-0, 27120-0","West Coast Plastics now offers the Fenwal Detect-A-Fire fire detectors. These fire detection and release devices are the heart of many fire protection systems.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Fenwal Detect-A-Fire Fire Detectors The Fenwal Detect-A-Fire Fire Detectors are the heart of many fire protection systems. These highly reliable devices have been a standard of the industry for over 45 years. Many thousands of these units are now in use controlling the release of extinguishants such as clean agents, CO2, water, or dry chemicals. In some systems the Detect-A-Fire is used as a fire alarm device, to sense overheat or fire and alert personnel. In other systems it is used as a release device, to sense fire and actuate fire attack systems. The Fenwal Detect-A-Fire has met with wide acceptance because it is designed with rate compensation. Rate compensation provides a unique advantage over both fixed temperature and rate-of-rise types of detectors because only the Detect-A-Fire unit accurately senses the surrounding air temperature regardless of the fire growth rate. At precisely the predetermined danger point, the system is activated. The secret of the unit \'s sensitivity is in the design. The outer shell is made of a rapidly expanding alloy which closely follows changes in surrounding air temperature. The inner struts are made of a lower expanding alloy. Designed to resist thermal energy absorption and sealed inside the shell, the struts follow temperature changes more slowly. A slow rate fire will heat the shell and struts together. At the set point, the unit will trigger. A transient rush of warm air up to 40F/min. may expand the shell, but not enough to trigger the unit, virtually eliminating false alarms. If a fast rate fire starts, the shell will expand rapidly. The struts will close and the unit will trigger. The faster the fire rate of growth, the sooner the Detect-A-Fire will react. Fenwal Detect-A-Fire units are not position sensitive. Horizontal and vertical detectors refer to the most common mounting configuration for that unit. Each type can be mounted either horizontally or vertically depending on the application and installation requirements. Download Fenwal Detect-A-Fire Datasheet (pdf) Fenwal Detect-A-Fire Horizontal Flush Mounting Unit (upper left), Vertical Mount Unit in Explosion Proof Junction Box (upper right), Vertical Mount Unit (lower right). FEATURES: Repeatable - resets itself, nothing to replace, testable Rugged - withstands shock and vibration Versatile - offers various factory set temperature settings Durable - long lasting stainless steel shell Economical - wide spacing, reduces installation costs Internal contact area is hermetically sealed in stainless steel Color coded to show temperature rating Fenwal Detect-A-Fire Fire Detectors - SPECIFICATIONS Model No. Mounting Configuration Construction Contact Action on Temp. Rise Maximum Temperature Temp. Settings (&ordm;F) (*=Stocked) Price 12-A27020-000 Horizontal Flush Mounted St. Steel Shell Cold Steel Housing Opens 225&ordm;F 140*,160,190*,210,225 225.00 12-B27020-000 Horizontal Flush Mounted St. Steel Shell Cold Steel Housing Opens 325&ordm;F 275,325 225.00 12-A27020-001 Horizontal Surface Mounted St. Steel Shell Cold Steel Housing Opens 225&ordm;F 140*,160,190,210,225 225.00 12-B27020-001 Horizontal Surface Mounted St. Steel Shell Cold Steel Housing Opens 325&ordm;F 275,325 225.00 12-A27021-000 Horizontal Flush Mounted St. Steel Shell Cold Steel Housing Closes 225&ordm;F 140*,160,190*,210,225* 225.00 12-B27021-000 Horizontal Flush Mounted St. Steel Shell Cold Steel Housing Closes 325&ordm;F 275,325 225.00 12-A27021-001 Horizontal Surface Mounted St. Steel Shell Cold Steel Housing Closes 225&ordm;F 140*,160,190*,210,225 225.00 12-B27021-001 Horizontal Surface Mounted St. Steel Shell Cold Steel Housing Closes 325&ordm;F 275,325 225.00 12-E27120-000 Vertical Hex Head St. Steel Shell Brass Head Opens 225&ordm;F 140*,160*,190*,210,225* 201.00 12-F27120-000 Vertical Hex Head St. Steel Shell Brass Head Opens 360&ordm;F 275,325*,360 209.00 12-G27120-000 Vertical Hex Head St. Steel Shell Brass Head Opens 450&ordm;F 450 215.00 12-E27120-022 Vertical Hex Head All Type 300 St. Steel Opens 225&ordm;F 140,160,190,210,225 253.00 12-F27120-022 Vertical Hex Head All Type 300 St. Steel Opens 360&ordm;F 275,325,360 262.00 12-G27120-022 Vertical Hex Head All Type 300 St. Steel Opens 450&ordm;F 450 270.00 12-E27121-000 Vertical Hex Head St. Steel Shell Brass Head Closes 225&ordm;F 140*,160*,190*,210*,225* 201.00 12-F27121-000 Vertical Hex Head St. Steel Shell Brass Head Closes 360&ordm;F 275*,325*,360* 209.00 12-G27121-000 Vertical Hex Head St. Steel Shell Brass Head Closes 500&ordm;F 450*,500 215.00 12-H27121-000 Vertical Hex Head St. Steel Shell Brass Head Closes 725&ordm;F 600*,725* 225.00 12-E27121-020 Vertical Hex Head All Type 300 St. Steel Closes 225&ordm;F 140*,160*,190*,210,225* 253.00 12-F27121-020 Vertical Hex Head All Type 300 St. Steel Closes 360&ordm;F 275*,325*,360 262.00 12-G27121-020 Vertical Hex Head All Type 300 St. Steel Closes 500&ordm;F 450,500 270.00 12-H27121-020 Vertical Hex Head All Type 300 St. Steel Closes 725&ordm;F 600*,725 283.00 12-E28020-003 Vertical Coupling Head All Type 300 St. Steel Opens 225&ordm;F 140,160,190,210,225 267.00 12-F28020-003 Vertical Coupling Head All Type 300 St. Steel Opens 360&ordm;F 275,325,360 276.00 12-G28020-003 Vertical Coupling Head All Type 300 St. Steel Opens 450&ordm;F 450 285.00 12-E28021-005 Vertical Coupling Head All Type 300 St. Steel Closes 225&ordm;F 140,160,190,210,225* 267.00 12-F28021-005 Vertical Coupling Head All Type 300 St. Steel Closes 360&ordm;F 275,325*,360 276.00 12-G28021-005 Vertical Coupling Head All Type 300 St. Steel Closes 500&ordm;F 450*,500 285.00 12-H28021-005 Vertical Coupling Head All Type 300 St. Steel Closes 725&ordm;F 600,725 297.00 ORDERING INFORMATION Model No. Temp. Settings (&ordm;F) (*=Stocked) Price To Order--Find the Model Number that you need, then select the temperature setting required, enter the quantity and then click the purchase button. 12-A27020-000 140*,160,190*,210,225 225.00 140&deg;F 160&deg;F 190&deg;F 210&deg;F 225&deg;F 12-B27020-000 275,325 225.00 275&deg;F 325&deg;F 12-A27020-001 140*,160,190,210,225 225.00 140&deg;F 160&deg;F 190&deg;F 210&deg;F 225&deg;F 12-B27020-001 275,325 225.00 275&deg;F 325&deg;F 12-A27021-000 140*,160,190*,210,225* 225.00 140&deg;F 160&deg;F 190&deg;F 210&deg;F 225&deg;F 12-B27021-000 275,325 225.00 275&deg;F 325&deg;F 12-A27021-001 140*,160,190*,210,225 225.00 140&deg;F 160&deg;F 190&deg;F 210&deg;F 225&deg;F 12-B27021-001 275,325 225.00 275&deg;F 325&deg;F 12-E27120-000 140*,160*,190*,210,225* 201.00 140&deg;F 160&deg;F 190&deg;F 210&deg;F 225&deg;F 12-F27120-000 275,325*,360 209.00 275&deg;F 325&deg;F 360&deg;F 12-G27120-000 450 215.00 275&deg;F 325&deg;F 12-E27120-022 140,160,190,210,225 253.00 140&deg;F 160&deg;F 190&deg;F 210&deg;F 225&deg;F 12-F27120-022 275,325,360 262.00 275&deg;F 325&deg;F 360&deg;F 12-G27120-022 450 270.00 450&deg;F 12-E27121-000 140*,160*,190*,210*,225* 201.00 140&deg;F 160&deg;F 190&deg;F 210&deg;F 225&deg;F 12-F27121-000 275*,325*,360* 209.00 275&deg;F 325&deg;F 360&deg;F 12-G27121-000 450*,500 215.00 450&deg;F 500&deg;F 12-H27121-000 600*,725* 225.00 600&deg;F 725&deg;F 12-E27121-020 140*,160*,190*,210,225* 253.00 140&deg;F 160&deg;F 190&deg;F 210&deg;F 225&deg;F 12-F27121-020 275*,325*,360 262.00 275&deg;F 325&deg;F 360&deg;F 12-G27121-020 450,500 270.00 450&deg;F 500&deg;F 12-H27121-020 600*,725 283.00 600&deg;F 725&deg;F 12-E28020-003 140,160,190,210,225 267.00 140&deg;F 160&deg;F 190&deg;F 210&deg;F 225&deg;F 12-F28020-003 275,325,360 276.00 275&deg;F 325&deg;F 360&deg;F 12-G28020-003 450 285.00 450&deg;F 12-E28021-005 140,160,190,210,225* 267.00 140&deg;F 160&deg;F 190&deg;F 210&deg;F 225&deg;F 12-F28021-005 275,325*,360 276.00 275&deg;F 325&deg;F 360&deg;F 12-G28021-005 450*,500 285.00 450&deg;F 500&deg;F 12-H28021-005 600,725 297.00 600&deg;F 725&deg;F NOTE: Stocked units generally ship in 3-5 days, non-stock in 2-3 weeks. FOB: Culver City, CA. This page last modified on 2/23/2011 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",75);arrFiles[93]=new Array(94,"HTML/Partlow-MRC5000-Manual.pdf","30 Jul 2009","MRC5000 REC/CTRL MANUAL","","MRC5000 REC/CTRL MANUAL","Form 3803 · Price  15.00 Edition 1 · © Dec. 1997  ONE AND TWO PEN CIRCULAR CHART RECORDING CONTROLLER  MRC 5000  Installation, Wiring, Operation Manual  Brand  THE PARTLOW-WEST COMPANY TWO CAMPION ROAD · NEW HARTFORD, NY 13413 USA 1-800-866-6659 · 1-315-797-2222 · FAX 1-315-797-0403  I  nformation in this installation, wiring, and operation manual is subject to change without notice. One manual is provided with each instrument at the time of shipment. Extra copies are available at the price published on the front cover.  Copyright © December 1997, The Partlow-West Company, all rights reserved. No part of this publication may be reproduced, transmitted, transcribed or stored in a retrieval system, or translated into any language in any form by any means without the written permission of The Partlow-West Company. This is the First Edition of the MRC 5000 Recording Controller Manual. It was written and produced entirely on a desk-top-publishing system. Disk versions are available by written request to The Partlow-West Company Marketing Communications Department. We are glad you decided to open this manual. It is written so that you can take full advantage of the features of your new MRC 5000 microbased chart recording controller.  NOTE:  It is strongly recommended that Partlow Brand equipped applications incorporate a high or low limit protective device which will shut down the equipment at a preset process condition in order to preclude possible damage to property or products.  2  TABLE OF CONTENTS  PAGE NUMBER 5  5 5 5 5 5  SECTION 1 - OVERVIEW  1.1 1.2 1.3 1.4 1.5 Display Control Alarms Digital Communications Power Input  SECTION 2 - INSTALLATION & WIRING  2.1 2.2 2.3 2.4 Unpacking Location / Mounting Preparation for Wiring Wiring Connections  6  6 6 8 11  SECTION 3 - NORMAL OPERATION  3.1 3.2 3.3 3.4 Changing The Chart Control Output Settings Alarm Settings High/Low Limits  15  15 15 16 16  SECTION 4 - RECORDER SETUP, TEST, AND CALIBRATION 16  4.1 Hardware Selections - Input Jumper Positions 4.2 Recorder Programming 4.3 Test Mode 17 17 20  SECTION 5 - RECORDER CALIBRATION MODE  5.1 Input Calibration 5.2 Chart/Pen Calibration  21  21 22  SECTION 6 - MODEL NUMBER CHANGES APPENDICES  A - Model Number Hardware Matrix Details B - Specifications Warranty  23  24 25 31  3  FIGURES  Figure 2-1A Figure 2-1B FIgure 2-1C Figure 2-2 Figure 2-3 Figure 2-4 Figure 2-5A Figure 2-5B Figure 2-6 Figure 2-7 Figure 2-8 Figure 2-9A Figure 2-9B Panel Mounting Surface Mounting Adaptor Plate Noise Suppression Noise Suppression Board and Terminal Locations AC Power Input Wiring-Standard Voltage Power Wiring-Low Voltage Input Signal Wiring Relay Output Wiring Communications Wiring Transmitter Power Supply (One Transmitter) Transmitter Power Supply (Two Transmitters) 6 7 7 9 9 11 12 12 12 13 13 14 14  4  Section 1 Overview  This instrument records process trend lines, one or two pens, on a 10 inch circular chart. As an option, up to two alarm points are provided for each of the two pens. This recorder will accept J, K, T, R, and S Thermocouples and RTD inputs, as well as typical Millivolt, Milliamp (4-20mA) and Volt inputs, (up to 5 volts).  1.1 DISPLAY  Process values for each pen can be displayed on the .56  LED display, or the display can be blanked. In the latter case, the display is used only for programming and setting alarm points.  1.2 CONTROL  The instrument can be provided with relay control outputs which can be programmed for on-off control capability.  1.3 ALARMS  Two optional alarm output relays, with SPDT contacts, are available for each pen. Each alarm is also configurable as a latching, limit device. In this case, a manual reset button is required and included when the High/Low Limit option is ordered.  1.4 DIGITAL COMMUNICATIONS  An optional, RS-485 digital communications port is available that utilizes the standard MODBUS RTU protocol.  1.5 POWER INPUT  The standard recorder will operate on input power over the range of 90-264 VAC, 50-60 Hz, without any modifications. A low power voltage option (20-50 VAC or 22-65 VDC) is also available. All Low Voltage option recorders are clearly identified as such by a label near the power wiring terminal block.  5  Section 2 Installation and Wiring  Read these instructions completely and carefully before proceeding with the installation and operation of this recorder. Electrical code requirements and safety standards should be observed. Installation should be performed by qualified personnel only.  Caution: The standard recorder will accept a power input over the range of 90-264 VAC. There is a special low power voltage option that is available. Please verify the AC input power required by the recorder before proceeding with the installation. The power required is listed in the Model/Serial number label affixed to the platen in the upper left hand corner.  2.1 UNPACKING  Remove the recorder from the carton and inspect for any damage due to shipment. If any damage is noted, report and file a claim with the carrier. Write the model number and serial number of the instrument on the inside front cover of this operation manual for future reference.  2.2 LOCATION / MOUNTING  Locate the instrument away from excessive moisture, oil, dust and vibration. Do not subject the instrument to operating temperatures outside of the 0 to 55°C (32 to 131°F) range. The panel where the instrument will be mounted must provide rigid support for the approximate 7 lb. weight of the instrument. Adjacent instruments may be mounted within a minimum of 2 inches horizontally and 3 inches vertically, providing that proper panel support is provided. PANEL MOUNTING: 1. Remove the mounting brackets attached to the recorder upon receipt. 2. Cut panel opening to the dimensions illustrated in Figure 2-1A. 3. Insert the recorder in the panel opening. Reattach the mounting brackets to the side of the recorder with the mounting ears facing the back of the panel. Adjust the mounting brackets so they fit snugly against the panel, and then tighten. PANEL MOUNTING HARDWARE REQUIRED: (provided with instrument) (1) set mounting brackets - mounted to the recorder (1) set mounting screws - mounted to the recorder  FIGURE 2-1A  ±0.06  ±0.06  6  SURFACE MOUNTING: 1. Loosen the mounting brackets attached to the recorder and flip their position so the ears are flush with the back of he recorder. Fasten the recorder to the surface using the appropriate fasteners (#10 screws or nuts and bolts) depending on the surface material. 2. As an alternative, remove the brackets, attach them to the surface, and then attach the recorder to the brackets.  FIGURE 2-1B  RETROFIT: Note: An Adapter Plate is available (P/N 50033301) that allows the recorder to retrofit with the Partlow MRC 7000 and ARC 4100 recorders. Figure 2-1C shows the adapter plate relative to the MRC 7000/ARC 4100 cutout. The Adapter Plate includes ears that attach to the sides of the recorder.  FIGURE 2-1C  Use #10 screws  7  2.3 PREPARATION FOR WIRING  Electrical noise interference is a phenomenon typical of industrial environments. Use the following guidelines which are generally used to minimize the effect of electrical noise on instrumentation in general.  2.3.1 WIRING GUIDELINES  Listed below are some of the common sources of electrical noise in the industrial environment: · Ignition Transformers · Arc Welders · Mechanical contact relay(s) · Solenoids Before using any instrument near the devices listed, the instructions below should be followed: 1. If the recorder is to be mounted in the same panel as any of the listed devices, separate them by the largest distance possible. 2. If possible, replace electromechanical relay(s) with solid state relays. 3. Consider using a separate isolation transformer to power the recorder and any other instrumentation in the panel. The transformer will serve to isolate the recorder from noise found on the AC power lines. 4. If the recorder is being installed on existing equipment, existing wiring should be inspected to insure that good wiring practices have been followed. 5. Connect a good earth ground to the recorder chassis ground connection. To verify this, take a resistive measurement from the instrument chassis to the nearest metal water pipe or proven earth ground. The reading should not exceed 100 ohms. Each instrument should have a dedicated earth ground. Do not chain link multiple instrument ground wires. 6. AC neutral should be at or near ground potential. To verify this, measure the AC voltage between neutral and ground. The reading should be no more than 50 millivolts. If greater, the secondary of the transformer feeding the recorder should be checked out by an electrician. 7. Wire Isolation/Segregation - this recorder is designed to promote proper separation of the wiring groups that connect to it. The AC power terminals are located near the top of the instrument. The input signal terminals are located in the middle section of the main board and the output alarm relay connections are on a separate board in the lower right hand corner of the instrument. 8. Input Signal Wiring - Shielded cable helps eliminate electrical noise being induced on the wires. All input wires should be run with shielded cable. Connection lead length should be kept as short as possible. The shield should be grounded at one end only. The preferred grounding location is at the sensor, transmitter or transducer. 9. For severe levels of electrical noise, it may be necessary to suppress the noise at its source. Many manufacturers of relays, contractors, etc. supply  surge suppressors  which mount on the noise source. For those devices that do not have surge suppressors supplied, RC (resistance-capacitance) networks and/or MOVs (metal oxide varistors) may be added. Inductive Loads - MOVs are recommended for transient suppression for inductive loads, and should be connected in parallel and as close as possible to the load. See Figure 2-2. Additional protection may be provided by adding an RC network across the load. Contacts - Arcing may occur across contacts (relays or switches) when they open and close. This results in electrical noise as well as damage to the contacts. Connecting an RC network, properly sized, in parallel, can eliminate this problem. See Figure 2-3. For circuits up to 3 amps, a combination of a 220 ohm resistor and 0.5 microfarad capacitor (1000 volts) is recommended. For circuits from 3 to 5 amps, connect two of these in parallel. The resistor should be 1/4 watt or 1 watt for 115 VAC or 230VAC circuits, respectively.  8  FIGURE 2-2  C  A.C.  MOV  Inductive Load R  FIGURE 2-3  MOV  A.C.  R  C  Inductive Load  2.3.1 SENSOR PLACEMENT  If the input probe will be subjected to corrosive or abrasive conditions, it should be protected by the appropriate thermowell. The probe should be positioned to reflect the true process temperature: In liquid media - the most agitated area In air - the best circulated area For thermocouple sensors, the lead resistance should not exceed 300 ohms. If this is exceeded, recorder accuracy could be affected. To determine the temperature error caused by lead length resistance, use the following equation: Terr = TCe x L where; TCe = temperature error in °F or °C per 1000 feet L = length of lead wire in thousands of feet  9  TABLE 1 Temperature error in °C per 1000 feet of Lead wire AWG Thermocouple Type: No. J K T R S 10 0.03 0.09 0.04 0.10 0.11 12 0.05 0.13 0.06 0.16 0.16 14 0.09 0.21 0.10 0.27 0.26 16 0.14 0.34 0.15 0.41 0.42 18 0.22 0.55 0.25 0.68 0.68 20 0.36 0.86 0.39 1.08 1.09 24 0.88 2.19 0.99 2.72 2.73 TABLE 2 Temperature Error in °F per 1000 feet of Lead wire AWG Thermocouple Type: No. J K T R S 10 0.06 0.15 0.07 0.18 0.19 12 0.10 0.24 0.11 0.30 0.30 14 0.16 0.39 0.18 0.48 0.48 16 0.25 0.61 0.28 0.75 0.75 18 0.40 0.99 0.45 1.22 1.23 20 0.64 1.55 0.71 1.94 1.96 24 1.58 3.94 1.78 4.89 4.91  For 3 wire RTDs, the instrument can virtually eliminate all lead wire resistance error. Two wire RTDs should be used only with lead lengths less than 10 feet, unless special input calibration is performed using the iCor (Input Correction) capability. (See Section 4 for setting iCor.) To determine the temperature error resulting from the lead length resistance, use the following equation: Terr = TRe x L where; TRe = temperature error in °C or °F per 1000 feet L = length of lead wire in thousands of feet  TABLE 3 AWG No. 10 12 14 16 18 20 24  2 Wire RTD Error °C +/-5.32 +/-9.31 +/-13.3 +/-21.3 +/-34.6 +/-54.5 +/-86.5 Error °F +/-9.31 +/-14.6 +/-23.9 +/-38.6 +/-61.2 +/-97.1 +/-155.6  10  2.4 WIRING CONNECTIONS  WARNING: Avoid electrical shock. AC power wiring must not be connected at the source distribution panel until all wiring connections are completed.  All wiring connections are typically made to the instrument at the time of installation. All connections are made behind the access door on the recorder right side. Loosen the two thumbscrews and open the access door to complete all wiring. Connections should be made at the terminal blocks , two 14 gauge wires maximum, copper conductors only, except thermocouple inputs. Terminal blocks are designated TB1 through TB4. See Figure 2-4 for the terminal block locations. The number of terminal blocks present on the instrument depends on the model/hardware configuration.  FIGURE 2-4  TB1 Terminals located behind access door Power Wiring 1  TB2  1 Pen 1 Input  JU1  Recorder Platen TB3 1 Pen 2 Input  JU2  TB4  1 Communications  11  2.4.1 ELECTRICAL CONDUIT OPENINGS  The instrument case has 3 conduit openings, all on the right hand side of the case. To minimize the effect of electrical noise, the following wire groups should be routed through the conduit openings as shown below. Top Conduit Opening - Power Input - TB1 Middle Conduit Opening - Input Signal Wiring & Communications - TB2, TB3, and TB4 Bottom Conduit Opening - Optional Control/Alarm Outputs - Option Board TB5-TB8 Note: Unused conduit openings should be sealed.  2.4.2.1 AC POWER WIRING - STANDARD VOLTAGE  Connect the AC hot line to terminal 1 of TB1 and the neutral to terminal 2 of TB1. Connect the AC ground to terminal 3 of TB1. See Figure 2-5A 2 5 A .  FIGURE 2-5A  TB1 - Power Wiring 3 Ground  2~ AC - Neutral 1~ AC - Hot  2.4.2.2 POWER WIRING - LOW VOLTAGE  Connect the AC hot line to terminal 1 of TB1 and the neutral to terminal 2 of TB1. Connect the AC ground to terminal 3 of TB1. Connrct the DC positive (+) to terminal 1 of TB1 and the negative (-) to terminal 2 of TB2. Connect the ground to terminal 3 of TB1. See Figure 2-5B. A 5  FIGURE 2-5B  TB1 - Power Wiring 3 Ground  2~ AC - Power-Neutral-DC(-) 1~ AC - Power-Hot-DC(+)  2.4.3 INPUT SIGNAL WIRING  Pen 1 inputs are connected to TB2 and Pen 2 inputs are connected to TB3. The input wiring for each pen is identical. See Figure 2-6 for details on wiring various types of inputs to the recorder.  FIGURE 2-6  Milliamp  TB2/TB3 1+ 2 3 4  mA Input  Millivolt, Volt  TB2/TB3 1 2 3+ 4mV V TC  -  3 Wire RTD  TB2/TB3 1 2 3 4  RTD  2 Wire RTD  TB2/TB3 1 2 3 4 RTD  Install jumper  12  2.4.4 RELAY OUTPUT WIRING  Relay outputs, up to 2 for each pen, are provided as an option on this instrument with a separate circuit board that is mounted in the lower right hand corner of the instrument, near the lower electrical conduit hole. Wire up each relay as shown in Figure 2-7.  FIGURE 2-7  TB5 - Pen 1, Alarm 1 1 2 3 Normally Closed Common Normally Open  TB6 - Pen 1, Alarm 2 1 Normally Closed 2 3 Alarm Option Board Common Normally Open  TB7 - Pen 2, Alarm 1 1 2 3 Normally Closed Common Normally Open  TB8 - Pen 2, Alarm 2 1 2 3 Normally Closed Common Normally Open  2.4.5 COMMUNICATIONS WIRING  Connections for the Communications option are made to the Main board via the TB4 connections. See Figure 2-8 for wiring.  FIGURE 2-8  TB4 - Communications 1 2 3  +  Shield  13  2.4.6 TRANSMITTER POWER SUPPLY WIRING  Connections are made as shown using TB10, terminal 2 as positive (+) and terminal 1 as negative (-). See Figure 2-9A for one transmitter and Figure 2-9B for two transmitters (40mA DC maximum).  FIGURE 2-9A  TB10 1 + 2 + 1  TB2/TB3 2 3 4  Shield Twisted Pairs  +  -  Two Wire Transmitters  FIGURE 2-9B  TB10 1 + 2 + 1 TB2 2 3 4 + 1 TB3 2 3 4  Shield Twisted Pairs  +  -  +  -  Two Wire Transmitters  Two Wire Transmitters  14  Section 3 Normal Operation  Assuming that the MODE switch (discussed later) is in the RUN position, on power up, the recorder will display the software revision, in the format rX.XX, while the pens move to the home position (toward the center of the chart). Then the instrument will display the model number. Only the first 8 digits will be displayed, 4 digits at a time, for two seconds each. Then the display will blank while the recorder is measuring the input(s). Then the pen(s) will go to their proper positions on the chart and the display will show the process value for pen 1 (if configured to display it) and will alternately show the pen 2 value (if it is present and if configured to display it), indicated by the green, PEN 2 LED. If any output is active, the appropriate LED will be lit. Note: Each time power is applied, the pen(s) will move to the home position (toward the center of the chart) and then position themselves at the proper place on the chart. The recorder will operate using the Program Parameters that were last stored in memory. The recorder is shipped from the factory set up for a Type J thermocouple input, range code 1 (0-1400°F) on all pens. To modify the input types and ranges, see Section 4 for detailed instructions. Located on the backside of the access door (inside the recorder) is a Short Form Programming Card that summerizes the Run and Program mode information. See Appendix A for a complete description of the model number and options. See Section 6 for modifying the recorder model number.  SENSOR FAULT DETECTION  The recorder will display, record, and act upon normal measured values. If an input is above or below the advertised span, the display will indicate a Hi or Lo condition, respectively. If the input is disconnected (sensor break) or excessively out of range, SnSr will be displayed. Relays, output LED, and pens will react normally when in a Hi or Lo condition, as if the value was high or low, relative to the setpoint. In a SnSr condition, relays will be de-energized, output LEDs will not be lit, and pens will go upscale. NOTE: A sensor break can not be detected on zero based Volt and Milliamp inputs (0-5 volts and 0-20mA), as the divider or shunt resistor, coupled with no input connection, produce a valid input signal of zero. NOTE: A  Lo  condition can not be detected on zero based Volt, Milliamp, and Millivolt inputs, due to the nature of the hardware. The instrument will handle slightly negative signals, but more negative inputs will result in the display indicating a  Hi  condition. Refer to the Specifications section for more details.  3.1 CHANGING THE CHART  To make chart changing easier, the recorder can move the pens to the outside edge of the chart. It is not necessary to use this capability. Do so only if you find it more convenient. DO NOT PUSH THE PENS MANUALLY. This could affect mechanical adjustments or bend the pen arms, adversely affecting accurate operation.  POSITIONING THE PENS FOR CHART CHANGING  While the MODE switch is in the RUN position, press the SCROLL key. CC will appear in the display, designating chart changing. Press the DOWN arrow key. The recorder will move the pens fully upscale. The display will flash CC. Change the chart per the instructions that follow and then press the DOWN arrow key again. The recorder will resume normal trend recording.  CHANGING THE CHART PAPER  To change the chart, pull up on the chart clip located in the center of the chart. Remove the old chart and place the new chart on the chart hub. DO NOT press down firmly. The UP arrow key can be used to advance the chart. Every time the UP arrow key is pressed, the chart will advance one step. Line up the current time on the chart with the chart time arrow located to the right of the display. Then press the chart down on the chart hub and flip the chart clip to the down position.  15  3.2 CONTROL OUTPUT SETTINGS  3.2.1 SINGLE OUTPUT  When Single Output On/Off control is configured as CH (Control Heat), the relay will turn OFF when the process value is greater than the setpoint by one-half the hysteresis value and turn ON when the process value is less than the setpoint by one-half the hysteresis value. When Single Output On/Off control is configured as CC (Control Cool), the relay will turn ON when the process value is greater than the setpoint by one-half the hysteresis value and turn OFF when the process value is less than the setpoint by one-half the hysteresis value.  3.2.2 DUAL OUTPUT - HEAT/COOL  When Dual Output On/Off control is configured as CH (Control Heat) for Output 1 and CC (Control Cool) for Output 2, Output 1 relay will turn OFF when the process value is greater than the setpoint plus one-half the hysteresis value and turn ON when the process value is less than the setpoint minus one-half the hysteresis value. Output 2 relay will turn ON when the process value is greater than the setpoint plus one and one-half the hysteresis value and turn OFF when the process value is less than the setpoint plus one-half the hysteresis value.  3.2.3 DUAL OUTPUT - HEAT/HEAT  When Dual Output On/Off control is configured as CH (Control Heat) for Output 1 and CH for Output 2, Output 1 relay will turn OFF when the process value is greater than the setpoint plus one-half the hysteresis and turn ON when the process value is less than the setpoint minus one-half the hysteresis value. Output 2 relay will turn OFF when the process value is equal to the setpoint minus one-half the hysteresis and turn ON when the process value is equal to the setpoint minus one and one-half the hysteresis value.  3.2.4 DUAL OUTPUT - COOL/COOL  When Dual Output On/Off control is configured as CC (Control Cool) for Output 1 and CC for Output 2, Output 1 relay will turn OFF when the process value is equal to the setpoint minus one-half the hysteresis and turn ON when the process value is equal to the setpoint plus one-half the hysteresis value. Output 2 relay will turn OFF when the process value is equal to the setpoint plus one-half the hysteresis value and turn ON when the process value is equal to the setpoint plus one and one-half the hysteresis value.  3.2.5 TO REVIEW/MODIFY CONTROL SETTINGS  Repeatedly depress the SCROLL key. If any control outputs exist, the OUT LED (OUT 1/1, OUT2/1, etc.) for the first existing control will flash along with its current control setpoint in the order shown below. Note that CC (for chart changing) will also appear in the sequence when the SCROLL key is repeatedly depressed. OUT 1/1 LED flashes value OUT 2/1 LED flashes value Display shows Pen 1/Control setpoint  Display shows Pen 2/Control setpoint  If Control Changes are allowed/enabled, use the UP/DOWN keys to change the setting. All control settings are defaulted to 0 and are adjustable from -9999 to 9999 (assuming no decimal positions). If Control Changes are disabled, the settings cannot be changed, only viewed.  16  3.3 ALARM SETTINGS  There are two possible alarm set point values for each of the two possible inputs/pens. They will be displayed only if the alarm options are present and configured. The types of alarms and the ability to make alarm set point changes, is defined during configuration. See Section 4 to select the types of alarms and to allow/disable alarm changes.  TO REVIEW/MODIFY ALARM SETTINGS  Repeatedly depress the SCROLL key. If any alarms exist, the alarm LED (ALRM 1/1, ALRM 1/2, etc.) for the first existing alarm will flash along with its current alarm set point in the order shown below. Note that CC (for chart changing) will also appear in the sequence when the SCROLL key is repeatedly depressed. OUT 1/1 LED flashes OUT 1/2 LED flashes OUT 2/1 LED flashes OUT 2/2 LED flashes Display shows Pen 1/Alarm 1 setpoint value Display shows Pen 1/Alarm 2 setpoint value Display shows Pen 2/Alarm 1 setpoint value Display shows Pen 2/Alarm 2 setpoint value  If Alarm Changes are allowed/enabled, use the UP/DOWN keys to change the setting. All alarm settings are defaulted to 0 and are adjustable from -9999 to 9999 (assuming no decimal positions). If Alarm Changes are disabled, the settings cannot be changed, only viewed.  3.4 HIGH/LOW LIMITS  High or Low Limits are latching alarms. Once an alarm is engaged, it will remain active until BOTH of the following occur: 1) The alarm condition no longer exists (i.e. for a high limit the process value has fallen below the alarm setpoint), and, 2) The alarm condition is acknowledged by depressing the red reset button to right of the display, on the platen. The button will reset any limit alarms that can be reset. If power is cycled and the alarm condition no longer exists, the corresponding limit will be reset.  Section 4 - Recorder Setup, Test, and Calibration  Because the MODE switch protects the configuration as well as the calibration of the recorder,  calibration seal  labels are provided to cover up the switch, if desired, to secure the configuration and calibration, as well as record the date of the calibration. The label looks like this:  MODE  CAL DATE / /  If necessary, remove the label or  seal  to access the MODE switch. The instrument has two basic  modes  of operation. The Run mode (as addressed in Section 3) is the normal operating mode. The other basic mode is the Program/Test/Calibration mode, which is used only for setup, troubleshooting, and calibration. The Program/Test/Calibration mode, accessed by having the MODE switch in the PROG/TEST/CAL position, is further divided into the three respective modes of Program, Test, and Calibration. Each of these modes is divided into sections corresponding to a portion of the programming parameters, or individual test or calibration functions. The availability of various options (i.e. alarms, communications, etc.), as defined by the model number shown by the recorder on power-up, will determine the selections offered in the Program, Test, and Cal mode. For example, if no alarm options exist, then the alarm types do not need to be configured. Located on the back of the access panel (inside the recorder) is a Short Form Programming Card that can be used as a reference for selecting all program parameters.  17  4.1 HARDWARE SELECTIONS - INPUT JUMPER POSITIONS  Hardware jumpers JU1 and JU2 are used to select the input type for Pen 1 and Pen 2 respectively. The jumper positions are shown on the main wiring label on the recorder as well as on the Short Form Programming Card. See below: JU1 and JU2 Positions - JU1 is located between wiring terminals TB2 and TB3 on the edge of the main board. JU2 is located between wiring terminals TB3 and TB4 on the same board. RTD and Millivolt 5 VDC Milliamp Thermocouple  4.2 RECORDER PROGRAMMING  The recorder setup programming can only be accomplished when the MODE slide switch is placed in the PROG/TEST/CAL position. This switch is located to the left of the display. The Program mode is used to select: chart rotation speed, input types/ranges, display scaling, and display options, chart scaling, and relay operation. In the Program/Test/Calibration mode, the keys will function as follows: SCROLL When a mode or section designation is displayed, SCROLL steps to the next mode or section. When a parameter code is displayed, SCROLL will display the corresponding parameter value. When a parameter value setting is displayed, SCROLL will display the next parameter code.  DOWN ARROW When a mode or section designation is displayed, DOWN will enter that mode or section. When a parameter code is displayed, DOWN will display the next parameter code. When a parameter setting is displayed, the setting will be decremented or changed, unless it is at its limit.  UP ARROW  When a mode designation is displayed, the UP key will have no effect, as the instrument is at the initial level. Use the MODE switch to return to normal operation. When a section designation is displayed, the UP key will revert to the mode designation. When a parameter code is displayed, UP will revert back to the section designation. When a parameter setting is displayed, the setting will be incremented or changed, unless it is at its limit.  To enter the Program/Test/Cal mode, position the MODE switch accordingly. The unit will display Prog. Subsequent depressions of the SCROLL key will cause the unit to display tESt, and then CAL, and back to Prog. NOTE: When the MODE switch is placed in the PROG/TEST/CAL position, all output LEDs will be turned off and all relays will be deenergized. To enter the Program mode, press the DOWN arrow key when Prog is displayed. The display will show PEn1 (Pen 1 parameters). Subsequent depressions of the SCROLL key will show PEn2 (Pen 2 parameters, if Pen 2 exists), CHAr (Chart operation), CP (Comms parameters, if optional communications is installed) and then back to PEn1. To enter the desired section of the Program mode, press the DOWN arrow key when the desired section is displayed. Use the keys as defined previously to enter modes and sections, move around, and modify parameter settings. The parameters, their definitions, and range of adjustment, are as follows:  PEN 1 AND PEN 2 SECTIONS OF PROGRAM MODE - PEn1 and PEn2  (Pen 2 will appear only if present in the recorder.)  18  These parameters apply to each pen, assuming pen 2 is present, and are configured in each respective section.  PARAMETER CODE  InPS  PARAMETER DESCRIPTION  Input Selection  SETTINGS OR RANGE  0 - 18 0 = J T/C 0 to 760°C 1 = J T/C 0 to 1400°F 2 = K T/C 0 to 1360°C 3 = K T/C 0 to 2500°F 4 = T T/C -200 to 400°C 5 = T T/C -330 to 750°F 6 = R T/C 200 to 1650°C 7 = R T/C 400 to 3000°F 8 = S T/C 200 to 1650°C 9 = S T/C 400 to 3000°F 10 = RTD 100 ohm -140 to 400°C 11 = RTD 100 ohm -200 to 750°F 12 = 0-20mA 13 = 4-20mA 14 = 0-50mV 15 = 10-50mV 16 = 0-25mV 17 = 0-5VDC 18 = 1-5VDC -999 to 999*  DEFAULT SETTING  1  ICor  Input Correction (calibrates sensor to recorder) Output Type (will show only if present)  0  A1  OFF = none Hi = High Alarm Lo = Low Alarm HL = High Limit LL = Low Limit CH= Control Heat CC= Control Cool OFF = none Hi = High Alarm Lo = Low Alarm HL = High Limit LL = Low Limit CH= Control Heat CC= Control Cool On = Display value OFF = Do not display value  OFF  A2  Output Type (will show only if present)  OFF  dISP  Display Input/Pen Value during normal operation, RUN mode Decimal Point Position  On  dPOS  0 = nnnn 1 = nnn.n 2 = nn.nn -9999 to 9999*  0  EUU  EUL  Engineering Units that equate to upper transducer input (will show only for Volt or Milliamp Input types) Engineering Units that equate to lower transducer input (will show only for Volt or Milliamp Input types)  5000  -9999 to 9999*  0  19  ChUP  Value that equates to upper chart division Value that equates to Lower chart division Hysteresis or Switch differential for outputs in units, not percent (will show only if outputs present) Display Filter Factor Filters display for input noise. Higher number means more filtering. Alarm Changes Determines if output setpoints can be changed in the RUN mode  -9999 to 9999*  100  ChLO  -9999 to 9999  0  HySt  0 to 200*  3  dFF  1 to 10  1  ALC  On = Allowed/Enable OFF = Disable  On  * The range shown corresponds to no decimal position. If dPOS is 1, 9999 becomes 999.9, 200 becomes 20.0, etc.  CHART SECTION OF PROGRAM MODE - CHAr  (There is only one parameter in this section)  PARAMETER CODE  ChSP  PARAMETER DESCRIPTION  Chart Speed  SETTINGS OR RANGE  OFF = off - don \'t rotate 8Hr = 8 hours 12Hr = 12 hours 24Hr = 24 hours 48Hr = 48 hours 7dAy = 7 days  DEFAULT SETTING  24Hr  **COMMUNICATION PARAMETER - CP (There is only one parameter in this section) Only seen if optional communications is ordered.  PARAMETER CODE  CAd  PARAMETER DESCRIPTION  Communication Address  SETTINGS OR RANGE  0 to 247  DEFAULT SETTING  0  NOTE: Communications Bit Rate is fixed at 9600 baud.  20  4.3 TEST MODE - TEST  To enter the Test mode, press SCROLL until tESt shows on the display. Press DOWN to enter the Test mode. Press SCROLL to display the various tests (diSP and Chrt). Press DOWN to enter a test section.  4.3.1 Display, Keypad, and Relay Test - diSP  Once you enter the Display/Keypad/Relay test by depressing DOWN, the display should first show all 8s with decimal points and all status LEDs lit for about 5 seconds. Then the display will go blank for 5 seconds. Then the display will show SCrL. Depress the SCROLL key to proceed with the keypad test. The display will show UAro. Depress the UP arrow key to proceed with the keypad test. The display will show dAro. Depress the DOWN arrow key to complete the keypad test. The display will show rLy while the instrument does the relay test. Each output relay will be energized in sequence for about 4 seconds while its status LED (OUT 1/1, OUT 1/2, OUT 2/1, or OUT 2/2) is lit. When complete, rLy will be displayed for 4 seconds and then diSP will be displayed.  4.3.2 Chart Test - Chrt  Running the Chart Test will produce a test pattern drawn by the pens on the chart with the chart advancing. After entering the test by pressing DOWN, the green pen will go toward the home position and the red pen will go toward the outside of the chart. The chart will rotate at roughly 1 revolution every 1.5 minutes. Both pens will travel about 80% of the chart in about 15 seconds, and then reverse their travel, and return to their initial position. This process will continue to be repeated. Depress any key to terminate the Chart test. The pen(s) will go to the home position and then Chrt will be displayed.  21  Section 5 Recorder Calibration Mode - CAL  As covered in Section 4, the  calibration seal  may need to be removed to access the MODE switch to gain access to the calibration section. The MODE switch must be positioned to the PROG/TEST/CAL position. CAUTION: DO NOT ATTEMPT ANY CALIBRATIONS WITHOUT THE PROPER TEST EQUIPMENT THAT MEETS OR EXCEEDS THE SPECIFICATIONS LISTED. The Calibration mode provides for the calibration of all the input types for each input as well as the calibration of each pen to the chart. The Input Calibration can be performed for ONLY the Input Type selected bt the hardware jumpers JU1 and/or JU2 AND ONLY the Input Type selected in the Program Mode Input Selection code InPS. See below: Input Type Thermocouple RTD mV mA V JU1 DOWN PARK PARK MIDDLE UP JU2 DOWN PARK PARK MIDDLE UP InPS  1   11   14   12   17   5.1 INPUT CALIBRATION - inP  EQUIPMENT REQUIRED: Input source with accuracy better than±0.05% of reading. Thermoucouple: 1 J type 1 mercury thermometer ±.25ºF or equivalent Allow 30 minutes of warm up time for the instrument with the T/C connected before proceeding with calibration DC: 0 to 50mV or 0 to 5V or 0 to 20mA Decade resistance box with .01% resolution or equivalent.  RTD:  PROCEDURE: Position the input conditioning jumpers (JU1 for Pen 1 and JU2 for Pen 2) for the proper input (T/C, RTD, mV, mA or V). Be sure that the Input Selection parameter InPS in Program Mode has been set correctly. To enter the Calibration mode, depress SCROLL until CAL appears on the display. Press DOWN to enter the Calibration mode. Depressing SCROLL will display the following Calibration sections: inP and Chrt. inP is the input calibration section and Chrt is the Chart calibration section. Press DOWN to enter the desired section when it is displayed. The Input Calibration section is divided into four sections: PEn, rAng, rEF, and SCAn. PEn selects the pen/input to be calibrated, rAng selec!ts the input type (T/C, RTD, etc.) to be calibrated, rEF defines the source value to be applied, and SCAn performs the actual calibration. A 50mV Input calibration must be performed before the Cold Junction Compensation Calibration can be performed. With PEn displayed, depress the SCROLL key to display the pen/input selected. Use the UP or DOWN keys to select 1 or 2, then depress the SCROLL key and rAng should be displayed. With rAng displayed, depress the SCROLL key to show the range code of the input type to be calibrated. The range codes are shown below. Use the UP or DOWN keys to select the range to be calibrated: 0=None, means no calibration will be performed. 1=50 millivolts for all millivolt and thermocouple ranges. 2=5 volts for all volt ranges.  22  3=Milliamp for all milliamp ranges. 4=RTD for all RTD ranges. 5=Cold Junction Compensation for all T/C ranges. After selecting the proper range code, depress the SCROLL key and rEF should be displayed. With rEF displayed, depress the SCROLL key to display the value for the source to be connected. Connect the input source set for this value to the selected input terminals. After connecting the source, depress the SCROLL key and SCAn should be displayed. When rAng selected is 5, connect the J type thermocouple to the input terminals. Position the  HOT  junction outside the enclosure with the mercury thermometer position along side. Using the UP or DOWN keys, make the display match the reading seen on the mercury thermometer. With SCAn displayed, depress the SCROLL key. The display will count up in seconds, denoting that it is proceeding with the calibration. When the calibration is complete, the display will show PEn. With PEn displayed, depress the SCROLL key to select another pen, or UP to return to inP. If something fails in the process, FAIL will be displayed. Depress any key to return to the inP display. The reference values needed to calibrate each input type are as follows: CODE 1-millivolt/TC 2-volt 3-milliamp 4-RTD 5-T/C REFERENCE VALUE 50.00mV ±0.01mV 5.00 Volts ±0.01V 20.00mA ±0.01mA 200.0ohms ±0.01% AMBIENT  5.2 CHART/PEN CALIBRATION - Chrt  This Cal section calibrates the pens to the chart, and is divided into two additional sections: PEn and ArC. PEn calibrates the pen spans to the chart. ArC provides a capability to make the pens sweep the chart to facilitate mechanical adjustments of pen arms.  PEN SPAN CALIBRATION - PEn  With Chrt in the display, press DOWN to enter the Chart calibration section and PEn will be displayed. Depressing the SCROLL key will toggle between PEn and ArC. With PEn in the display, press DOWN to enter the Pen Span calibration section. Each pen will home (move downscale), and the display will blank (this could take as long as 20 seconds). The display will show P1Lo. With P1Lo displayed, Pen 1 will be positioned at the low end of the chart. Use UP or DOWN to position Pen 1, the red pen, on the inner ring of the chart. Press SCROLL when done. The display will now show P1Hi and the red pen will go to the outer ring of the chart. Again, use UP or DOWN to adjust the pen. Press SCROLL when done. If Pen 2 is included, the same process must be repeated for Pen 2, the green pen. After P2Hi is completed, depressing SCROLL will return to PEn. If Pen 2 is not included, press SCROLL twice to skip P2Lo and P2Hi calibration, and return to PEn.  23  PEN ARC MECHANICAL ADJUSTMENTS - ArC  Important Note:  Pen arc adjustments have been done at the factory and should not need to be done in the field, unless the pen arm adjustments (mechanical) have been compromised. (This can happen if the pens are forcibly moved.) Adjustments can be made at the bottom or top of span. In either position, the arm  length  can be adjusted by moving the pen blade toward or away from the pivot point, but the pen tip should also line up with the inner or outer ring of the chart. The latter is referred to as  position . Only the red pen can be adjusted to draw the correct arc. It is not mechanically possible for the green pen to draw the correct arc if the red pen is adjusted to do so. With Chrt in the display, press DOWN to enter the Chart calibration section and PEn will be displayed. With PEn displayed, depressing the SCROLL key will toggle between PEn and ArC. With ArC in the display, press DOWN to enter the Pen Arc adjustment section. During arc calibration/adjustment, ArC will remain in the display. The pens will move to the home position and the red pen will then draw an arc upscale. If the pen is upscale, pressing the DOWN key will cause the selected pen to move downscale. If it is already downscale, the DOWN key will cause the chart to advance. If the pen is downscale, pressing the UP key will cause it to move upscale. If it is already upscale, the UP key will cause the chart to advance. Adjust the red pen \'s  length  and  position  on the inner/outer ring as needed. Repeat this sequence until the red pen is properly adjusted. When finished with the red pen, press SCROLL to adjust the green pen. For the green pen, the  length  should be adjusted so that it almost touches the red pen when they pass each other. Adjust the  position  to align with the inner/outer ring. When finished with the green pen, press SCROLL to exit. P1Lo will be displayed, as the Pen Span calibration must now be done.  Section 6 Model Number Changes  When adding options to the recorder in the field, it is necessary to change the model number contained within the memory of the recorder. The model number is displayed during the power up sequence. The first 8 digits of the model number are displayed in two 4 digit steps. The first displayed value will be the prefix 5, the first pen option, second pen option, and pen 1 output (the first 4 digits of the model number). The next display will show the pen 2 output, communications, case, and voltage options present on the recorder. To change the model number, set the MODE switch to the PROG/TEST/CAL position, and power down and power up the recorder. After the software revision is displayed while the pen(s) go to the home position, the first 4 digits of the model number will be displayed. Use UP or DOWN to change the number. Press SCROLL and the next 4 digits of the model number will be shown. Again use UP or DOWN to change the number. Make sure the model number is correct for the hardware options present. When complete, depress SCROLL. Refer to section 4.2 to make any programming changes required by the change in hardware options.  24  Appendix A - Model Number Matrix  5  FIRST PEN OPTION Recorder Only Controller High/Low Limit* SUFFIX None Alarms And Communications Connectivity Option (Allows for later field installation of both options) VOLTAGE Standard (90-264 VAC) Low Voltage** Standard Voltage Operation and Transmitter Power Supply Low Voltage Operation and Transmitter Power Supply  1 2 4  Blank AA  0 1 2 4  SECOND PEN OPTION None Recorder Only Controller High/Low Limit*  1 2 3 4  0 1 2  PEN 1 OUTPUTS None One Alarm Relay Two Alarm Relays PEN 2 OUTPUTS None One Alarm Relay Two Alarm Relays COMMUNICATIONS None Configurator Port RS-485 Coms Configurator Port & RS-485 Coms CASE Standard - NEMA 3 Door Lock NEMA 4X   0 1 2  * Does not include a relay. Order relays in output options. ** Low Voltage is 20-50 VAC or 22-65 VDC  Consult factory for availability  0 1 2 3  1 2 3  25  Appendix B - Specifications  INPUTS  Input Types/Range Thermocouple Type Range J 0°C to 760°C 0°F to 1400°F K 0°C to 1360°C 0°F to 2500°F T -200°C to 400°C -330°F to 750°F R 200°C to 1650°C 400°F to 3000°F S 200°C to 1650°C 400°F to 3000°F 100 ohm Platinum -140°C to 400°C -220°F to 750°F .00385 ohms/ohm/°C 0 to 20mA, 4 to 20mA Internal 4.7 ohm Shunt Resistor 0 to 25mV, 0 to 50mV, 10 to 50mV, 0 to 5 V, 1 to 5 V > 100M ohm for TC and mV inputs 100K ohms for 5V inputs 4.7 ohms for mA inputs 150 microamps, typical 1 scan per second for non-RTD inputs 1 scan per 1.2 seconds for RTD inputs Offset Adjustment, -999 to 999 units Display goes to  SnSr  and pen goes upscale if a sensor break is detected No sensor break can be detected for zero based Volt and Milliamp ranges Display goes to  Hi  10% above span. Display goes  Lo  10% below span or zero, whichever is higher. .  RTD Current DC Voltage DC Impedance  RTD Excitation Current Input Scan Rate Input Correction Sensor Fault Detection  INPUT PERFORMANCE  Performance Under Reference Condition: Measurement Error Cold Junction Compensation Error Cold Junction Compensation Rejection Linearization Error Ambient Temperature Error Common Mode Rejection Normal Mode Rejection Isolation Type J, K, T, R, S, and RTD: ±0.25% of span ±1 degree mA, mV, and VDC: ±0.25% of scaled span plus 1 least significant digit ±0.2°C @ 25°C 0.04°/°C deviation from 25°C TCs: ±0.25°C typical, ±0.5°C worst case with expectations RTDs: ±0.1°C typical, ±0.3°C worst case ±0.01% of span per°C deviation from 25°C >120 dB at 50/60 Hz, 260 VAC max. 85 dB minimum @60Hz or greater Universal input isolated from all outputs at 240VAC Inputs share a common signal ground  Reference Conditions Ambient Temperature Relative Humidity Supply Voltage Source Resistance Lead Resistance  25°C 60 - 70% 115 VAC, 60 Hz < 10 ohms for TC input < 0.1 ohm/lead balanced (Pt100)  26  RECORDING  Pen Type Pen Color Chart Size Chart Drive Chart Rotation Chart Span Disposable fiber tip Pen 1 - Red Pen 2 - Green 10 inch Stepper motor User configurable: 8 hours, 12 hours, 24 hours, 48 hours, or 7 days Bottom and top of span, -9999 to 9999 units  RECORDING PERFORMANCE  Chart Recording Accuracy Chart Rotation Accuracy 0.5% of chart span reference accuracy ± 0.5% of rotation time, assuming all backlash removed  OPERATOR INTERFACE  Display Status Indicators Keypad Display Modes Four digit, 0.56  high, red, seven segment, LED display Four red LED alarm status indicators, One green LED Pen 2 indicator Three keys for programming and unit operation Normal: Process value(s) or blank  CONTROL OUTPUTS  Number Type Hysteresis Up to two control outputs for each of two inputs On/Off, Reverse or Direct Acting Fully adjustable, 0 to 200 units, First output straddles setpoint, second output setpoint plus or minus 1/2 hysteresis and setpoint plus or minus 11/2 hysteresis  ALARMS  Number Type Limit Device Up to two process alarms for each of two inputs Process high or low Optional high/low limits for each input with latching output Normally open output latches open Red reset button included to the right of the display Fully adjustable, 0 to 200 units, single sided Alarm setpoint changes can be prohibited Alarms work normally in  Hi  and  Lo  conditions Alarm relays are deenergized in a  SnSr  sensor break condition  Hysteresis Security Sensor Fault Action  RELAY OUTPUTS  Relays SPDT, contacts rated 5 amps resistive at 115 VAC, 2.5 amps resistive at 230 VAC, 1/8 HP at 230 VAC (single phase), 250 VA at 115/230  POWER REQUIREMENTS  Line Voltage Power Consumption: 90-264 VAC, 50/60 Hz Optional: 20-50 VAC, 50/60 Hz or 22-65 VDC 18 VA Maximum  27  TRANSMITTER POWER SUPPLY  Transmitter Power Supply Provides up to 40mA of current at 24VDC  CONSTRUCTION  Enclosure NEMA Rating Conduit Openings Mounting Overall Dimensions Panel Cutout Panel Depth Panel Protrusion Weight Retrofit Injection molded Noryl case and cover with acrylic window NEMA 3 standard, NEMA 4X future option Three openings on the right side Panel or wall 14  wide X 14  high X 3.8  deep. (355.6mm X 355.6mm X 96.5mm) 12.7  wide X 12.7  high (322.58mm X 322.58mm) 2.5  (63.5mm) 1.3  (33.0mm) 7 lbs maximum With adaptor plate, will fit Partlow MRC 7000/ARC 4100 cutout  EVIRONMENTAL AND OPERATING CONDITIONS  Operating Temperature Storage Temperature Humidity Vibration Mounting Position 0°C to 55°C (32°F to 122°F) -40°C to 65°C (-4°F to 149°F) 10 to 90% RH, non-condensing 0.3 to 100 Hz @ 0.2g Up to 30° forward or backward tilt from vertical Up to 10° side tilt from vertical  DIGITAL COMMUNICATONS  Configuration Port Communications Port Protocol Bit Rate Parity Address TTL levels RS-485 serial communications, Half-duplex MODBUS RTU 9600 bits per second Odd User configurable - 0 to 247  GENERAL REFERENCE DATA  Data Backup Warranty EEPROM for configuration parameters and calibration data EEPROM for alarm setpoints Two years  APPROVALS AND COMPLIANCE  Safety UL Approved for USA - UL 1092, UL 916, and QUXY - File E67237 UL Certified for Canada - CSA Spec 142 - File E67237 CE - Complies with EN 61010-1:1993: Pending CE - Complies with EN50082-1992: Pending CE - Complies with EN50081-1: 1992 and EN50081-2:1994: Pending FM: Pending  Immunity/Susceptability Emissions Limit Device  28  NOTES  1. Linearization accuracy is based on conformance to NIST Monograph 175 (based on the ITS-90) for letter-designated thermocouple types, or other industry standards for RTDs. Factory Calibration is defined by limits of repeatability in a manufacturing environment and ± 0.15°C for thermocouple  2.  29  NOTES  Warranty and Return Statement  These products are sold by The Partlow-West Company under the warranties set forth in the following paragraphs. Such warranties are extended only with respect to a purchase of these products, as new merchandise, directly from The PartlowWest Company or from a Partlow Brand distributor, representative or reseller, and are extended only to the first buyer thereof who purchases them other than for the purpose of resale.  Warranty  These products are warranted to be free from functional defects in materials and workmanship at the time the products leave the The Partlow-West Company factory and to conform at that time to the specifications set forth in the relevant Partlow Brand instruction manual or manuals, sheet or sheets, for such products for a period of two years. THERE ARE NO EXPRESSED OR IMPLIED WARRANTIES WHICH EXTEND BEYOND THE WARRANTIES HEREIN AND ABOVE SET FORTH. THE PARTLOW-WEST COMPANY MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE PRODUCTS.  Limitations  The Partlow-West Company shall not be liable for any incidental damages, consequential damages, special damages, or any other damages, costs or expenses excepting only the cost or expense of repair or replacement as described above. Products must be installed and maintained in accordance with The Partlow-West Company instructions. Users are responsible for the suitability of the products to their application. There is no warranty against damage resulting from corrosion, misapplication, improper specifications or other operating condition beyond our control. Claims against carriers for damage in transit must be filed by the buyer. This warranty is void if the purchaser uses non-factory approved replacement parts and supplies or if the purchaser attempts to repair the product themselves or through a third party without ThePartlow-West Company authorization.  Returns  The Partlow-West Company \'s sole and exclusive obligation and buyer \'s sole and exclusive remedy under the above warranty is limited to repairing or replacing, free of charge, the products which are reported in writing to ThePartlow-West Company at its main office indicated below. The Partlow-West Company is to be advised of return requests during normal business hours and such returns are to include a statement of the observed deficiency. The buyer shall pre-pay shipping charges for products returned and The PartlowWest Company or its representative shall pay for the return of the products to the buyer. Approved returns should be sent to: THE PARTLOW-WEST COMPANY 2 CAMPION ROAD NEW HARTFORD, NY 13413 USA  THE PARTLOW-WEST COMPANY 2 CAMPION ROAD · NEW HARTFORD, NY 13413 USA 1-800-866-6659 · 315-797-2222 · FAX 315-797-0403  ",302);arrFiles[94]=new Array(95,"HTML/GP50-35-Transducer.php","","GP:50 Model 35 Melt Pressure Transducers - Equipment from West Coast Plastics","West Coast Plastics, GP50, melt pressure transducer, plastic melt probe, melt thermocouple, plastic pressure transducer, melt pressure sensor, GP:50","West Coast Plastics now offers Melt Pressure Transducers from GP50. For real time pressure control of the melted plastic.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search GP:50 Model 35 Melt Pressure Transducers Measure Plastic Melt Pressure &amp; Temperature in Extruders &amp; Injection Molders GP:50 Model 35 Flexible Armor with Rigid Stem Melt Pressure Transducer &amp; Temperature Probe The GP:50 product line of plastic melt pressure transducers and transmitters are based on the proven bonded strain gage principle successfully utilized in thousands of applications. Our unique design incorporates a heavier sensor allowing a thicker tip diaphragm, provides better linearity, and reduces costs. The design incorporates an extremely small capillary tubing that transmits the media pressure to the strain gage sensor and mating electronics via a mechanical fill fluid. (Mercury is the standard, Silicone oil, Mineral oil and Nak are readily available depending on the application). Main Features: Pressure and temperature measurement from a single mounting well Rugged, all-welded, all stainless steel construction. Interchangeable with existing systems. Adjustable calibration signal option Replaceable thermocouple during use (Type J std.) Internal Calibration Resistor set to 80% &plusmn; 0.5% FSO Zero and Span controls, approximately &plusmn; 20% FSO (2XX, 3XX only) PRESSURE RANGES: From 0-500 through 0-30,000 psi) (See ordering info) ACCURACY: (Non-Linearity, Hysteresis, Non-repeatability). &plusmn; 0.25% FSO, RSS (0-5000 psi &amp; higher) &plusmn; 0.5% FSO, RSS (0-500 and 0-3500 psi) The same high quality at pricing much better than the high-priced brands. Download GP:50 Model 35 Temperature/Melt Pressure Transducer Spec Sheet (pdf) Also Available: Melt Pressure Kits , Rupture Disks (Blow Plugs) , Pressure Transducers How to Order GP:50 Model 35 Quick Ship Melt Pressure/Temperature Transducers When placing an order, build the desired model number using this model number guide (below). Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. The part number and price will be shown on the next page. A selection of melt pressure tranducer configurations are available to meet the demands of your particular application. If the options you need are not available as a Quick Ship or if you have any questions about how to apply GP:50 Melt Pressure Transducers, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized GP:50 distributor and will be glad to help you design an effective melt pressure system to fit your application. __ 3 5 - __ __ - __ __ / __ __ 1 2 3 4 5 6 7 8 9 Model Range Conn. Options 1. Output Signal (choose 1, 2 or 3) Price 1 = 3 mV/V 735.00 2 = 0-5 Vdc 938.00 3 = 4-20 mA 1,086.00 2-3. Installation Style 35 = Flexible Armor Cable (18 pressure &amp; 3 thermocouple) with Rigid Stem including Thermocouple Probe N/C 4-5. Pressure Range (PSI) - (choose a range) RO = 1500 psi N/C RT = 3000 psi N/C RV = 5000 psi N/C RX = 7500 psi N/C RZ = 10000 psi N/C 6-7. Connector Options - (choose AA, CC, CD or CF) AA = PTIH-10-6P Standard Connector N/C CC = Bendix PC02E-12-8P Connector N/C CD = Cannon WK6-32S Connector N/C CF = 1/2 NPT (M) thread with 36 potted leads 45.00 8-9. Options AA = None N/C GS = 0-10Vdc (Model 235 only) 30.00 GU = Type K Thermocouple 30.00 Quick Ship assemblies ship in 3-5 days, FOB: Grand Island, NY. If other options or style are needed, please call us for a quote. This page last modified on 7/29/2009 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",20);arrFiles[95]=new Array(96,"HTML/GP50-30-31-Transducer.php","","GP:50 Model 30 &amp; 31 Melt Pressure Transducers - Equipment from West Coast Plastics","West Coast Plastics, GP50, melt pressure transducer, plastic melt probe, melt thermocouple, plastic pressure transducer, melt pressure sensor, GP:50","West Coast Plastics now offers Melt Pressure Transducers from GP50. For real time pressure control of the melted plastic.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search GP:50 Model 30 &amp; 31 Melt Pressure Transducers Measure Plastic Melt Pressure in Extruders &amp; Injection Molders GP:50 Model 30 Rigid Stem Melt Pressure Transducer GP:50 Model 31 Flexible Armor with Rigid Stem Melt Pressure Transducer The GP:50 product line of plastic melt pressure transducers and transmitters are based on the proven bonded strain gage principle successfully utilized in thousands of applications. Our unique design incorporates a heavier sensor allowing a thicker tip diaphragm, provides better linearity, and reduces costs. The design incorporates an extremely small capillary tubing that transmits the media pressure to the strain gage sensor and mating electronics via a mechanical fill fluid. (Mercury is the standard, Silicone oil, Mineral oil and Nak are readily available depending on the application). Main Features: Rugged, all-welded, all stainless steel construction. Interchangeable with existing systems. Many options available, including Hastelloy C-276 or Boron-Hardening Explosion-Proof ratings available Internal Calibration Resistor set to 80% &plusmn; 0.5% FSO Zero and Span controls, approximately &plusmn; 20% FSO (2XX, 3XX only) PRESSURE RANGES: From 0-500 through 0-30,000 psi) (See ordering info) ACCURACY: (Non-Linearity, Hysteresis, Non-repeatability). &plusmn; 0.25% FSO, RSS (0-5000 psi &amp; higher) &plusmn; 0.5% FSO, RSS (0-500 and 0-3500 psi) The same high quality at pricing much better than the high-priced brands. Download GP:50 Model 30/31 Melt Pressure Transducer Spec Sheet (pdf) Also Available: Melt Pressure Kits , Rupture Disks (Blow Plugs) , Temperature/Pressure Transducers How to Order GP:50 Model 30 &amp; 31 Quick Ship Melt Pressure Transducers When placing an order, build the desired model number using this model number guide (below). Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. The part number and price will be shown on the next page. A selection of melt pressure tranducer configurations are available to meet the demands of your particular application. If the options you need are not available as a Quick Ship or if you have any questions about how to apply GP:50 Melt Pressure Transducers, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized GP:50 distributor and will be glad to help you design an effective melt pressure system to fit your application. __ __ __ - __ __ - __ __ / __ __ 1 2 3 4 5 6 7 8 9 Model Range Conn. Options 1. Output Signal (choose 1, 2 or 3) Price 1 = 3 mV/V 656.00 2 = 0-5 Vdc 777.00 3 = 4-20 mA 924.00 2-3. Installation Style (choose 30 or 31) 30 = Rigid Stem (6 stem standard) N/C 31 = Flexible Armor Cable (18 standard) with Rigid Stem N/C 4-5. Pressure Range (PSI) - (choose a range) RO = 1500 psi N/C RT = 3000 psi N/C RV = 5000 psi N/C RX = 7500 psi N/C RZ = 10000 psi N/C 6-7. Connector Options - (choose AA, CC, CD or CF) AA = PTIH-10-6P Standard Connector N/C CC = Bendix PC02E-12-8P Connector N/C CD = Cannon WK6-32S Connector N/C CF = 1/2 NPT (M) thread with 36 potted leads 45.00 8-9. Options AA = None N/C GS = 0-10Vdc (Model 230 or 231 only) 30.00 Quick Ship assemblies ship in 3-5 days, FOB: Grand Island, NY.. If other options or style are needed, please call us for a quote. This page last modified on 7/21/2009 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",21);arrFiles[96]=new Array(97,"HTML/GP50-Melt-Pressure-Kit.php","","GP:50 Plastic Melt Pressure Kits - Equipment from West Coast Plastics","West Coast Plastics, GP50, melt pressure transducer, plastic melt probe, melt thermocouple, plastic pressure transducer, melt pressure sensor, GP:50","West Coast Plastics now offers Melt Pressure Transducers from GP50. For real time pressure control of the melted plastic.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search GP:50 Plastic Melt Pressure Kits Measure Plastic Melt Pressure in Extruders &amp; Injection Molders GP:50 Classic Melt Pressure Kit with Model 30 Melt Pressure Transducer and Model 1211 Melt Pressure Indicator. The GP:50 product line of plastic melt pressure transducers and transmitters is based on the proven bonded strain gage principle successfully utilized in thousands of applications. Our unique design incorporates a heavier sensor allowing a thicker tip diaphragm, provides better linearity, and reduces costs. The design incorporates an extremely small capillary tubing that transmits the media pressure to the strain gage sensor and mating electronics via a mechanical fill fluid. (Mercury is the standard, Silicone oil, Mineral oil and Nak are readily available depending on the application). GP:50 Melt-Kits come with everything you need for efficient and reliable extrusion pressure measurement. Melt-Kits include transducer, cable, indicator and more. Starter Melt Kit - Model 1310 - 1,045.00 Ideal for processors currently using blow plugs Model 30 Pressure Transducer 1211-B-B-1-R Melt Pressure Indicator MECA-CA connecting cable MHK-AA transducer mounting hole machining tool kit Getting Started guide Tube of anti-seize compound Screwdriver GP:50 baseball hat Classic Melt Kit - Model 1311 - 882.00 Ideal for processors currently measuring pressure Model 30 or Model 31 Pressure Transducer 1211-B-B-1-R Melt Pressure Indicator MECA-CA connecting cable Getting Started guide Tube of anti-seize compound Screwdriver GP:50 baseball hat Temperature/Pressure Melt Kit - Model 1312 - 1,155.00 Ideal for processors with temperature and pressure measurement requirements Model 35 Temperature/Pressure Transducer 1290 Indicator MECA-CA connecting cable MTC-AA thermocouple connector Getting Started guide Tube of anti-seize compound Screwdriver GP:50 baseball hat Differential Melt Kit - Model 1313 - 2,468.00 Ideal for processors who measure and control differential pressure Two Model 131 or two Model 331 Pressure Transducers 1235 Process Controller Two MECA-CA connecting cable Getting Started guide Tube of anti-seize compound Screwdriver GP:50 baseball hat Download GP:50 Melt Pressure Kit Spec Sheet (pdf) Also Available: Melt Pressure Transducers , Rupture Disks (Blow Plugs) , Temperature/Pressure Transducers GP:50 Temperature/Pressure Melt Pressure Kit with Model 35 Temperature/Melt Pressure Transducer and Model 1211 Melt Pressure Indicator. How to Order GP:50 Melt Pressure Kits When placing an order, build the desired model number using this model number guide (below). A selection of melt pressure tranducer configurations are available to meet the demands of your particular application. Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. If you have any questions about how to apply GP:50 Melt Pressure Transducers, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized GP:50 distributor and will be glad to help you design an effective melt pressure system to fit your application. 1 3 1 __ - __ __ __ - R __ - A A 1 2 3 4 5 6 7 8 9 10 11 Model Transducer Range Options 1-4. Melt Pressure Kit Model (choose 1310, 1311, 1312 or 1313) 1310 = Starter Melt Kit - 1,045.00 1311 = Classic Melt Kit - 882.00 1312 = Temperature/Pressure Melt Kit - 1,155.00 1313 = Differential Melt Kit - 2,468.00 5. Output Signal (choose 1, 2 or 3) 1 = 3 mV/V (all Models) 2 = 0-5 Vdc (only Models 1310, 1311, 1312) 3 = 4-20 mA (all Models) 6-7. Installation Style (choose 30, 31 or 35) 30 = Rigid Stem (6 stem standard) (only Models 1310,1311) 31 = Flexible Armor Cable (18 standard) with Rigid Stem (only Models 1311, 1313) 35 = Flexible Armor Cable (18 pressure &amp; 3 thermocouple) with Rigid Stem including Thermocouple Probe (only Model 1312) 8-9. Pressure Range (PSI) - (choose a range) RH = 500 psi RK = 750 psi RM = 1000 psi RO = 1500 psi RT = 3000 psi RV = 5000 psi RX = 7500 psi RZ = 10000 psi 10-11. Options AA = None Most assemblies ship in 2-3 weeks, FOB: Grand Island, NY. This page last modified on 7/21/2009 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",24);arrFiles[97]=new Array(98,"HTML/GP50-1254-Indicator.php","","GP:50 Model 1254 Pressure Indicator - Equipment from West Coast Plastics","West Coast Plastics, GP50, melt pressure transducer, plastic pressure transducer, melt pressure sensor, GP:50, pressure indicator, model 1254","West Coast Plastics now offers Digital Pressure Indicators from GP50. For over-pressure protection of plastics molding processes.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search GP:50 Model 1254 Digital Pressure Indicator Pressure, Level &amp; Temperature Transmitters &amp; Transducers The GP:50 Model 1254 Digital Pressure Indicator is a high powered, full-featured pressure indicator in a small panel-mount package. It works with your GP:50 melt pressure transducer to provide fast, accurate feedback of your melt process. With dual alarm relays and serial communications, the 1254 can give you process warning and computer interface. Just look at some of the features below: Features: 5 Digit LED Display Fast-Cal Calibration Transducer Excitation Supply Isolated Analog Input Transducer Health Test Function Dual Alarm Relays Serial Communications Fast Cal Operation: Automatically calibrates &amp; matches the indicator to a pressure transducer. It records the output at zero pressure &amp; then records the Span by activating the transducers internal calibration resistor. Transducer Test - Allows a fast &amp; accurate method of checking the wiring, calibration, and health of the connected transducer. Additional - Display Hold, Alarm Acknowledge, Keyboard Lock. Download GP:50 Model 1254 Digital Pressure Indicator Spec Sheet (pdf) How to Order GP:50 Model 1254 Digital Pressure Indicator When placing an order, build the desired model number using this model number guide (below). A selection of digital pressure indicators configurations are available to meet the demands of your particular application. Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. If you have any questions about how to apply GP:50 Model 1254 Digital Pressure Indicator, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized GP:50 Model 1254 Digital Pressure Indicator distributor and will be glad to help you design an effective melt pressure system to fit your application. 1 2 5 4 - 1 - __ Model Power Display Example: 1254-1-R Model 1254 = 2 Alarm Relays 500.00 Power 1 = 90-250V AC Input N/C Display (choose R or G) R = Red Display N/C G = Green Display 15.00 Most assemblies in stock, FOB: Grand Island, NY. This page last modified on 8/25/2009 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",15);arrFiles[98]=new Array(99,"HTML/GP50-1211-Indicator.php","","GP:50 Model 1211 Pressure Indicator - Equipment from West Coast Plastics","West Coast Plastics, GP50, melt pressure transducer, plastic pressure transducer, melt pressure sensor, GP:50, pressure indicator, model 1254","West Coast Plastics now offers Model 1211 Digital Pressure Indicators. from GP50. For over-pressure protection of plastics molding processes.","Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search GP:50 Model 1211 Digital Pressure Indicator Pressure, Level &amp; Temperature Transmitters &amp; Transducers The GP:50 Model 1211 Digital Pressure Indicator is a basic pressure indicator in a small panel-mount package with available options that allow it to fit into lots of different applications. It works with your GP:50 melt pressure transducer to provide fast, accurate feedback of your melt process. Just look at some of the features below: F eatures: 4 Digit LED Display Thermocouple, RTD, mV, mA, V, and Resistance Inputs Alarm Relay(s) Zero/Tare and Max/Min Memory Download GP:50 Model 1211 Digital Pressure Indicator Spec Sheet (pdf) How to Order GP:50 Model 1211 Digital Pressure Indicator When placing an order, build the desired model number using this model number guide (below). A selection of Digital Pressure Indicator configurations are available to meet the demands of your particular application. Select the configuration in the ordering table and then hit the Submit button at the bottom of the page. If you have any questions about how to apply GP:50 Digital Pressure Indicator, please contact us at West Coast Plastics Equipment , 800-392-8569. We are an authorized GP:50 distributor and will be glad to help you design an effective melt pressure system to fit your application. 1 2 1 1 - __ - __ - __ - __ Model Output Buttons Power Display Example: 1211-B-B-1-R Pressure Indicator Model 1211 195.00 Output A = 1 Alarm Relay N/C B = 2 Alarm Relays 50.00 C = 3 Alarm Relays 70.00 D = 1 Alarm Relay, 1 Analog Output (4-20mA) 90.00 E = 2 Alarm Relays, 1 Analog Output (4-20mA) 105.00 F = 3 Alarm Relays, 1 Analog Output (4-20mA) 130.00 Buttons N = Blank Fascia N/C B = Front Panel Push Buttons 10.00 Power 1 = 90-250V AC Input N/C 2 = 10-32V AC or DC Low Voltage Input 30.00 Display R = Red Display N/C G = Green Display 20.00 Most assemblies in stock, FOB: Grand Island, NY. This page last modified on 8/25/2009 Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",18);arrFiles[99]=new Array(100,"HTML/Amptek-Heat-Tape.pdf","15 Jul 2009","DUO_Clr_Both.pdf","","","Duo-Tape Heavy Insulated Tape  ®  Description: HTS/Amptek Duo-Tape® heaters are high temperature, flexible electric heating elements. A unique dual element circuit design allows the convenience of power leads on one end. Duo-Tapes® may be used on conductive surfaces as well as ceramic or glass. High Temperature Capability 1400oF AMOX® Yarn Insulation: 13 Watts/Inch2 8.67 Watts/Inch2 3.25 Watts/Inch2 AWH style heating tapes may be operated to 1400oF, with de-energized exposures to 1600oF. Duo-Tape® laboratory style heating tapes are offered in three standard watt densities;  \'D \' high @ 13 WSI  \'DM \' medium @ 8.67 WSI  \'DL \' low @ 3.25 WSI The unique, dual element circuit design allows the leadwires to exit from one end. (see reverse side) Unlike other straight element tapes, HTS/Amptek tapes are knitted into sine wave configurations. The element is cushioned and supported by knitted warp fabric as it expands evenly in all directions rather than one. Knitting puts more element length into a given area, providing longer life through better distribution of heat. (lower watts per inch of wire) Knitting yields ultimate flexibility. All HTS/Amptek tape elements are bundled fine strand resistance wire, 36 to 40 gauge, covered with a minimum of two layers of braided AMOX® yarn. The heavy braided outer cover provides added abrasion and dielectric protection for the element. Duo-Tapes® may be used on conductive surfaces, such as metal tubing etc., in addition to nonconducting ceramic and glassware. The multiple strand,  \'A \' Nickel conductor is covered with two layers of AMOX® yarn and impregnated with a high temperature binder.  High, Medium and Low Watt Density, Standard Designs  Power Leads on One End  Duo-Tape®  Knitted, Serpentine, Construction  Minimized Expansion, Vibration and Thermal Stress: Longer Life:  Flexible: Multi-Strand Wire Element High Temperature and Flexible:  Heavy Braided Outer Cover  Heavy Amox® Yarn:  Lead Wires, High Temperature  2 Ft. Leads on One End:  Duo-Tape® (leads on the same end) Heavy Insulated Heating Tapes  Heating Tape Basic Construction: HTS/Amptek® tape construction begins by first: double braiding high temperature AMOXtm yarn over multiple strands of fine resistance wire, then second: knitting the assembly into a tight, serpentine configuration, forming a flat tape. Duo-Tape® Heavy Insulated Tapes Feature the element construction of other tapes, except that two elements are knitted side by side as shown. This improved arrangement allows the two elements to be connected in series at one end and the leads to exit the other. The tape element is covered by an AMOXtm, braided outer jacket. All 120v tapes offer an optional plug.  Duo-Tape® ElementTwo wires knitted side-by-side. Each made of multi-strand NiChrome Alloy, covered with two layers of braided AMOXTM  AMOXTM Braided Outer Cover Tie laces are provided to secure the tape to the surface to be heated.  \'D \', High Watt Density 13 W/in2, 1400oF (760oC) Max Catalog Number Watts Volts 156 AWH-051-020D 312 AWH-051-040D AWH-051-060D 468 624 AWH-051-080D 780 AWH-052-100D AWH-052-120D 936 832 AWH-052-160D 312 AWH-101-020D AWH-101-040D 624 936 AWH-102-060D AWH-102-080D 1248 120 120 120 120 240 240 240 120 120 240 240  \'DM \', Medium Watt Density 8.66 W/in2, 1400oF (760oC) Max Catalog Number Watts Volts AWH-051-020DM AWH-051-040DM AWH-051-060DM AWH-051-080DM AWH-051-100DM AWH-052-120DM AWH-052-160DM AWH-101-020DM AWH-101-040DM AWH-102-060DM AWH-102-080DM AWH-102-100DM 104 208 312 416 520 624 832 208 416 624 832 986 120 120 120 120 120 240 240 120 120 240 240 240  High Temperature mechanical connector.  24  A-Nickel Leadwire, with double AMOXTM cover and binder coat.   \'DL \', Low Watt Density 3.25 W/in2, 1400oF (760oC) Max Catalog Number Watts Volts Size (US) Metric (cm) AWH-051-020DL AWH-051-040DL AWH-051-060DL AWH-051-080DL AWH-051-100DL AWH-051-120DL AWH-051-160DL AWH-101-020DL AWH-101-040DL AWH-101-060DL AWH-101-080DL AWH-102-100DL AWH-102-120DL AWH-102-160DL 39 78 117 156 195 234 312 78 156 234 312 385 468 624 120 120 120 120 120 120 120 120 120 120 120 240 240 240 .5  X 2 \' .5  X 4 \' .5  X 6 \' .5  X 8 \' .5  X 10 \' .5  X 12 \' .5  X 16 \' 1  X 2 \' 1  X 4 \' 1  X 6 \' 1  X 8 \' 1  X 10 \' 1  X 12 \' 1  X 16 \' 1.3 X 060 1.3 X 120 1.3 X 180 1.3 X 240 1.3 X 300 1.3 X 360 1.3 X 480 2.5 X 060 2.5 X 120 2.5 X 180 2.5 X 240 2.5 X 300 2.5 X 360 2.5 X 480  Plugs are not standard. (optional on 120 Volt tapes) Most sizes are available in 240V... see pricelist for complete listing. To Order or Additional Information: Contact your local HTS/Amptek® Representative or Distributor or call us direct. Special Designs Available: Contact HTS/Amptek® for custom configurations. Typical modifications are length, width, watts, volts, ohms, lead length, plugs and insulation type. Accessories Available From HTS/Amptek®: High temperature accessories such as additional lead wire, crimp connectors, insulating tape and temperature controls provide the convenient pieces to quickly perform your task.  AMOX, and Duo-Tape are tradenames of HTS/Amptek Co. Copyright Amptek, 2/03 AWHB006 Printed in U.S.A.  HTS/Amptek Company P. O. Box 1381 Stafford, Texas 77497 Phone:(281) 340-9800 Fax: (281) 340-9811  Made in U.S.A.  ",156);arrFiles[100]=new Array(101,"HTML/MTS-RSeries-SSI.pdf","22 Jul 2009","MTS-RSeries-SSI","","","R-SERIES MODELS RP/RH - SSI  R-Series Models RP and RH Sensors Synchronous Serial Interface (SSI) Output  I Rugged industrial sensor I Linear, absolute measurement I LEDs for sensor diagnostics I Non-contact sensing technology I Superior accuracy: Resolution down to 1 µm I Non-linearity less than 0.01% I Repeatability within 0.001% I Direct 24/25/26 Bit SSI output, gray/binary I Synchronous measurement for real-time sensing  Parameters  Stroke length:  Specifications (continued)  R-Series linear-position sensors  · R-Series model RH and RP sensors are extremely robust and are ideal for continuous operation under harsh industrial conditions. · Two standard sensor housings are available. The rod housing is capable of withstanding high pressures such as those found in hydraulic cylinders. The profile extrusion housing provides convenient mounting options and sliding magnets. · The sensor head contains active signal conditioning and a complete integrated electronics interface. Double shielding is used to ensure EMI protection for unsurpassed reliability and operating safety.  Profile-style sensor: 50 mm (2 in.) to 5080 mm (200 in.) Rod-style sensor: 50 mm (2 in.) to 7620 mm (300 in.) Operating voltage: +24 Vdc nominal: -15 or +20% Polarity protection: up to -30 Vdc Overvoltage protection: up to 36 Vdc Current drain: 100 mA typical Dielectric withstand voltage: 500 Vdc (DC ground to machine ground) Operating Temperature: -40 °C (-40 °F) to 75 °C (167 °F) conditions: Relative humidity: 90% no condensation Temperature coefficient: < 15 ppm / °C For two magnet differential outputs: 75 mm (3 in.) min. distance between magnets. Magnet speed: Any EMC test: Emissions IEC/EN 50081-1, Immunity IEC/EN 50082-2, IEC/EN 61000-4-2/3/4/6, level 3/4 criterium A, CE qualified Shock rating: 100 g (single hit)/IEC standard 68-2-27 (survivability) Vibration rating: 15 g (30 g with HVR option)/ 10-2000 Hz/IEC standard 68-2-6 Connection type: 7-pin D70 male connector or integral cable PROFILE STYLE (MODEL RP) SENSOR Electronic head: Aluminum housing Diagnostic display (LED \'s located beside connector/cable exit) Sealing: IP 65 Sensor extrusion: Aluminum Mounting: Adjustable mounting feet or T-slot nut (M5 threads) in base channel Magnet type: Captive-sliding magnet or open-ring magnet ROD STYLE (MODEL RH) SENSOR Electronic head: Aluminum housing Diagnostic display (LED \'s located beside connector/cable exit) Sealing: IP 67 or IP 68 for integral cable model Sensor rod: 304L Stainless steel Operating pressure: 350 bar, 690 bar peak, (5,000 psi, 10,000 psi peak) Mounting: Any orientation. Threaded flange M18 x 1.5 or 3/4-16 UNF-3A Typical mounting torque: 45 N-m (33 ft. - lbs.) Magnet type: Ring magnet, open-ring magnet, or magnet float  Parameters  Specifications  Measured variables: Displacement, displacement difference between 2 magnets, velocity Resolution: Displacement: 1 µm, 2 µm, 5 µm, 10 µm, 20 µm, 50 µm, 100 µm. Update time: Measuring length: 300 750 1000 2000 5000 mm Measurements/sec. 3.7 3.0 2.3 1.2 0.5 kHz Non-linearity: < ± 0.01% F.S. (minimum ± 40 µm) Repeatability: < ± 0.001% F.S. (minimum ± 2.5 µm) Hysteresis: < 4 µm typical 2 µm Outputs: Interface: Synchronous Serial Interface (SSI) or Differential signal in SSI standard. Data format: Binary or gray, optional parity and error bit Data length: 8 to 32 bit Data speed: 70 kBd to 1 MBd, depending on cable length: Length: <3 <50 <100 <200 <400 m Baud rate: 1.0 MBd <400 kBd <300 kBd <200 kBd <100 kBd  MTS Sensors  13  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series - SSI  ENHANCED MONITORING AND DIAGNOSTICS Sensor status and diagnostic display Integrated LEDs (green/red) provide basic visual feedback for normal sensor operation and troubleshooting.  ADVANCED COMMUNICATION AND PROGRAMMABILITY Sensor field programming R-Series Models RP and RH sensors are preconfigured at the factory by model code designation. If needed, MTS offers a programming kit for modifying the sensor parameters. There is no need to open the sensor \'s electronics housing. R-Series SSI PC programming kit This programming kit includes a wall adapter style power supply, serial converter box, two connection cables (wired for RS-422 protocol), and the software CD-ROM. The SSI parameters that are field programmable are as follows:  LED \'s  Green ON ON ON  Red OFF ON Flashing  Description Normal function Magnet not detected Sensor not synchronous* Programming mode  Flashing ON  *for synchronous operation mode only.  Synchronous Serial Interface (SSI) The sensors fulfill all requirements of the SSI standard for an absolute encoder. The displacement value is encoded in a 24/25/26 code format and is transmitted at high speed in SSI standard format to the control device. The main feature of the SSI interface is the synchronized data transfer. Synchronization in a closed-loop control system is made simple. A clock pulse-train from a controller is used to gate out sensor data: one bit of position data is transmitted to the controller per one clock pulse received by the sensor. The absolute position data is continually updated by the sensor and converted by the shift-register into serial information. Sensor input  Optocoupler 91 ohms 7 mA Clock (+) 100 ohms 2 Vdc LED 1 nF 100 ohms Clock (-) 91 ohms  · Data length · Data format · Resolution · Measuring direction · Synchronous / asynchronous measurement · Offset, start of the measurement length · Alarm value (magnet outside stroke length) · Measurement filter · Differential measurement: Distance between two magnets · Speed measurement instead of position  R-Series - SSI  Programming Kit, part no. 253310 (Serial converter, Power supply, Cable, Software)  MTS R-Series utility software user interface  Timing diagram  Clock (+) Data (+)  MSB  Clock interval  min. 16 us  LSB  Logic diagram  Clock (+) ASIC for absolute position data Microprocessor system position value = 24/25/26 Bit Binary or Gray code Shift register Parallel-serial converter  Optocoupler Data (+)  Clock (-)  Driver  Data (-) +24 Vdc 0 Vdc  Temposonics® Linear-Position Sensors Product Catalog 551075 C  14  MTS Sensors  MODEL RP PROFILE-STYLE SENSOR The profile-style (model RP) sensor offers modular construction, flexible mounting configurations and easy installation. Captive-sliding magnet  49 mm 1.92 in.) 9.5 mm (0.37 in.) Beginning of stroke - Null Position Captive-sliding magnet 12 mm (0.47 in.)  Note: See page 58 for installed magnet dimensions.  45 mm (1.77 in.)  Sensor head  5.5 mm (0.21 in.) dia. for M5 or #10 screw  35.6 mm 1.40 in.) 50 mm (1.96 in.) 68 mm (2.67 in.)  2 mm (0.07 in.)  12 mm (0.47 in.) 75 mm (2.95 in.) 28 mm (1.10 in.)  Mounting foot, moveable 14.5 mm (0.57 in.) Stroke length Dead zone 66 mm (2.6 in.)  D70 connector  Open-ring magnet  P05 integral cable option  Beginning of stroke - Null Position Open ring magnet 28 mm (1.1 in.) Mounting support (non-ferrous material) 28 mm (1.1 in.) Sensor head  22 mm (0.86 in.)  MODEL RH ROD-STYLE SENSOR  The rod-style (Model RH) sensor offers modular construction, flexible mounting configurations, and easy installation. It is designed for internal mounting in applications where high pressure conditions exist, (5000 psi continuous, 10,000 psi spike), such as hydraulic cylinders. The Model RH sensor may also be mounted externally in many applications.  Beginning of stroke (Null position) 51 mm 68 mm (2.7in.) (2 in.) Null zone Electronics housing O-Ring 44 mm (1.7 in.) A M4 x 59 mm Button-head hex screws (2X) Flat-faced flange 25 mm (0.98 in.) Sensor rod End of stroke Dead zone Stroke dependent refer to chart below  Stroke length  LED window  Integral connector  10 mm (0.39 in.) dia.  Note: See page 57 for mounting and magnet details.  Beginning of stroke (Null position) 51 mm (2 in.) Null zone O-Ring A  Stroke-dependent Dead Zones Stroke Length 50 mm (2 in.) - 5000 mm (197 in.) 5005 mm (197.1 in.) - 7620 mm (300 in.)  Dead Zone 63.5 mm (2.5 in.) 66 mm (2.6 in.)  76 mm (3 in.) Grounding lug Mating connector (7-pin DIN style)  68 mm (2.7 in.)  B 25.4 mm (1 in.) Raised-face flange 25 mm (0.98 in.) 2.5 mm (0.10 in.) C  Housing style Flange type T S M  Description US customary threads with raised-face flange US customary threads with flat-faced flange Metric threads with flat-faced flange  A Flange threads 3/4 -16 UNF-3A 3/4 -16 UNF-3A M18 x 1.5  B Dimensions 44.5 mm (1.75 in.) 44.5 mm (1.75 in.) 46 mm (1.81 in.)  C Dimensions 51 mm (2 in.) 51 mm (2 in.) 53 mm (2.1 in.)  MTS Sensors  15  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series - SSI  CONNECTIONS AND WIRING Sensor connections Wiring  6 1 4 2 7 3 5  Cable connector (recommended, order separately) Pin No. 1 2 3 4 5 6 7 Wire Color White n.c Gray Pink Red n.c Yellow Green n.c. n.c. n.c. Cable Color Gray Pink Yellow Green Brown White n.c. Function Data (-) Data (+) Clock (+) Clock (-) +24 Vdc 0 Vdc (GND) 7-pin D7 straight-exit connector part no. 560701  54 mm (2.1 in.) 18 mm (0.7 in.)  Integral D70 connector as viewed from end of sensor  37 mm (1.5 in.)  Wiring  Pin No. A B C D E F G H I J K  Function DC Ground (for supply) Data (-) Data (+) 24 Vdc (-15/+20) Clock (+) Clock (-) -  7-pin D7 90° connector part no. 560779  54 mm (2.1 in.)  A H G K F E D J C B  R-Series - SSI  Integral MS0 connector as viewed from end of sensor (see Notes 1 & 2)  Notes: 1. The MS0 connector option does not provide the sensor status and diagnostics LED \'s (as shown on page 14), for sensor status. 2. MS style cable connector, part no. 370013, (field installed) mates with the Integral MS0 connector.  Temposonics® Linear-Position Sensors Product Catalog 551075 C  16  MTS Sensors  HOW TO ORDER  1  1 2 3 4 5 6 7 8 9 10 11 12  S  13 14 15 16 17 18 19  RP = RH = RF =  SENSOR MODEL Profile style Hydraulic rod-style Flexible style HOUSING STYLE Model RP profile-style sensor (magnet included): Captive-sliding magnet with joint at top (part no. 252182) Captive-sliding magnet with joint at front (part no. 252184) Open-ring magnet (part no. 251416-2) Model RH rod-style sensor only (magnet must be ordered separately): US customary threads, raised-faced flange and pressure tube, standard US customary threads, flat-faced flange and pressure tube, standard Same as option  T , except uses fluoroelastomer seals for electronics housing Same as option  S , except uses fluoroelastomer seals for electronics housing Metric threads, flat-faced flange and pressure tube, standard Same as option  M , except uses fluoroelastomer seals for electronics housing Sensor cartridge only, no flange and pressure tube, stroke length < 1830 mm (72 in.)  S= V= M=  T= S= U= H= M= V= B=  S= M=  Model RF flex sensor only, (reference page 41 for flex housing style): magnet must be ordered separately: US customary threads, flat-faced flange Metric threads, flat-faced flange  STROKE LENGTH _ _ _ _ M = Millimeters (Encode in 5 mm increments) _ _ _ . _ U = Inches and tenths (Encode in 0.1 in. increments)  Stroke length notes: 1. Profile-style sensor (model RP) stroke length = 50 mm (2 in.) - 5080 mm (200 in.) 2. Rod-style sensor (model RH) stroke length = 50 mm (2 in.) - 7620 mm (300 in.) Cable length note: MTS recommends the maximum integral cable length to be 10 meters (33 ft.). Cables greater than 10 meters (33 ft.) in length are available, however, proper care must be taken during handling and installation.  CONNECTION TYPE Integral connector: D70 = 7-pin DIN (M16), male, standard MS0 = 10-pin MS style, male Integral cables: P_ _ = Integral high-performance cable (orange jacket) with pigtail termination E_ _ = Integral standard cable, with pigtail termination F_ _ = Integral cable, black polyurethane jacket with pigtail termination Cable length: _ _ = 1 (01) to 30 (30) meters or 1 (01) to 99 (99) ft. Encode in meters if using metric stroke length, encode in feet if using US customary stroke length  INPUT VOLTAGE 1 = +24 Vdc (+20%, -15%) A = Same as option  1 , except includes the High Vibration-Resistant (HVR) option Model RH sensor only, stroke length = 50 mm (2 in.) - 2000 mm (78.7 in.) see note OUTPUT S_ _ _ _ _ _ = SSI output (fill in the six blanks with the following codes):  a b c d e f  Note: The High Vibration-Resistant (HVR) option provides the model RH rod-style sensors with increased resistance to shock and vibration for use in heavy duty machinery. Refer to  G-Series and R-Series Sensors for High Shock and Vibration Applications , part no. 551073 for more information.  a) Data length 1 = 25 bits 2 = 24 bits 3 = 26 bits  b) Output Format B = Binary G = Grey code  c) Resolution 1 = 0.005 mm (0.0002 in.) 2 = 0.01 mm (0.0004 in.) 3 = 0.05 mm (0.002 in.) 4 = 0.1 mm (0.004 in.) 5 = 0.02 mm (0.0008 in.) 6 = 0.002 mm (0.00008 in.) 8 = 0.001 mm (0.00004 in.)  d) Performance 1 = Standard 2 = Skip filter (2 times) 4 = Skip filter (4 times) 8 = Skip filter ( 8 times)  e, f) Scale Orientation 00 = Forward-acting measurement 01 = Reverse-acting measurement 02 = Forward-acting, synchronized measurement 05 = Forward-acting measurement, Bit 25 = Alarm, Bit 26 = Parity even 12 = Differential measurement, synchronized (2 magnets) 13 = Velocity, asynchronous  Temposonics® Linear-Position Sensors Product Catalog 551075 C  MTS Sensors  17  R-Series - SSI  R-Series - SSI  Temposonics® Linear-Position Sensors Product Catalog 551075 C  18  MTS Sensors  ",1246);arrFiles[101]=new Array(102,"HTML/MTS-R-Analog.pdf","21 Jul 2009","MTS-R-Analog","","","R-SERIES MODELS RP/RH - ANALOG  R-Series Models RP and RH Sensors - Analog Output Position, Speed, Speed with Direction Single or Dual-Magnet Positions  I Rugged industrial sensor  Parameters  Specifications (continued)  I Linear, absolute measurement I LEDs for sensor diagnostics I Non-contact sensing technology I Non-linearity less than 0.01% I Repeatability within 0.001%  I Direct Analog output, displacement + speed I Dual magnet position measurement I 100% field adjustable Null and Span setpoints Parameters Specifications  Measured variables: Displacement, speed (magnitude), or velocity (with direction) for single or dual magnets Resolution: Position measurement: 16 bit; 0.0015% (minimum 1 µm) Speed measurement: 0.1 mm/s Non-linearity: < ± 0.01% full stroke (minimum ± 50 µm) Repeatability: < ± 0.001% full stroke (minimum ± 2.5 µm) Hysteresis: < 4 µm Outputs: Voltage: 0 to 10, 10 to 0, -10 to +10, +10 to -10 Vdc (minimum controller load >5k ohms) Current: 4(0) to 20 mA, 20 to 4(0) mA, (min./max. load 0/500 ohms) Stroke length: Profile style: 50 mm (2 in.) to 5080 mm (200 in.) (Position MeasurementRod style: 50 mm (2 in.) to 7620 mm (300 in.) Range) Update time: 0.5 ms up to 1200 mm, 1.0 ms up to 2400 mm, 2.0 ms up to 4800 mm, 5.0 ms up to 7620 mm stroke length. Speed measurement: Range: 0.025 - 10 m/s (1.0 - 400.0 in./s) Deviation: <0.5% Resolution: 0.1 mm/s (0.004 in./s) Update time: See position measuring range Operating voltage: +24 Vdc nominal: -15 or +20% Polarity protection: up to -30 Vdc Overvoltage protection: up to 36 Vdc Current drain: 100 mA typical Dielectric withstand voltage: 500 Vdc (DC ground to machine ground)  Operating conditions: - 40 °C (-40 °F) to 75 °C (167 °F) Relative humidity: 90% no condensation Temperature coefficient: < 30 ppm / °C Setpoint adjustment, (Null/Span): 100% of electrical stroke length. Min. 25 mm (0.98 in.) distance between setpoints. For dual magnet outputs: Min 76 mm (3 in.) distance between magnets. EMC test: Emissions IEC/EN 50081-1, Immunity IEC/EN 50082-2, IEC/EN 61000-4-2/3/4/6, level 3/4 criterium A, CE qualified Shock rating: 100 g (single hit)/IEC standard 68-2-27 (survivability) Vibration rating: 15 g (30 g with HVR option)/ 10-2000 Hz/IEC standard 68-2-6 Connection type: 6-pin male D60 connector or integral cable PROFILE STYLE (MODEL RP) SENSOR Electronic head: Aluminum housing Diagnostic display (LED \'s located beside connector/cable exit) Sealing: IP 65 Sensor extrusion: Aluminum Mounting: Adjustable mounting feet or T-slot nut (M5 threads) in base channel Magnet type: Captive-sliding magnet or open-ring magnet ROD STYLE (MODEL RH) SENSOR Electronic head: Aluminum housing Diagnostic display (LED \'s located beside connector/cable exit) Sealing: IP 67 or IP 68 for integral cable model Sensor rod: 304L Stainless steel Operating pressure: 350 bar static, 690 bar peak (5000 psi static, 10,000 psi peak) Mounting: Any orientation, threaded flange M18 x 1.5 or 3/4-16 UNF-3A Typical mounting torque: 45 N-m (33 ft. - lbs.) Magnet type: Ring magnet, open-ring magnet or magnet float  MTS Sensors  7  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series Analog  R-SERIES ANALOG SENSOR OUTPUT OPTIONS Outputs R-Series Models RP and RH analog sensors provide single or dual magnet sensor options along with one or two channel outputs. The R-Series analog sensor can be ordered for a single-position magnet providing one displacement output, and/or one velocity output over the active stroke length. The sensor can also be ordered for dual-position magnets providing two displacement outputs, or two velocity outputs, or one of each.  Single magnet sensor  ADVANCED COMMUNICATION AND PROGRAMMABILITY Sensor field programming R-Series Model RP and RH Analog sensors are preconfigured at the factory by model number designation. For many applications, no adjustments are required for normal sensor installation and operation. If, however, sensor parameter changes are needed while in the field, the R-Series Analog sensor is easily programmed externally. There is no need to open the sensor \'s electronic housing.  R-Series Analog  M1  Active stroke length (Position measuring range)  M1a  Position / Speed 76 mm min. (3 in.) Dual magnet sensor M1 M2 M1a M2a  R-Series Analog PC Programming kit, part no. 253309 For single or dual magnet sensors  0 Vdc  10 Vdc  0 Vdc  10 Vdc Position 1 / Position 2 100%  This programming kit includes a wall adapter style power supply, serial converter box, two connection cables (wired for the LIN protocol), and the software CD-ROM. The serial converter box and one of the cables are required to communicate between a Windows PC and the sensor. When running the R-Series Analog PC Setup software many customized settings are possible for: · Setpoint 1 (Null) and Setpoint 2 (Span) for single or dual magnets. (See the description for setpoints under the section,  R-Series Analog Handheld Programmer .) · Output range settings for speed, or for speed with direction. · Assign position or velocity output functions for the single or dual magnets, and for the one or two output channels. (Output function assignments are limited to the manufacturing build type of the sensor, see below.) · Error output values when the magnet moves beyond the programmed setpoints. Field programming is available to adjust the output values for any setting needed, within the selected output range. Each sensor \'s output range is selected from the available options when ordering a particular sensor model number, (see pages 7 and 8). There are 6 different manufacturing build types used to provide for the various output ranges. These are: Single Channel Output for either position or speed 1) Voltage output between 0 and +10 volts 2) Voltage output between -10 and +10 volts 3) Current output between 0 (or 4) and 20 mA Two Channel Outputs for position and/or speed 4) Voltage outputs between 0 and +10 volts 5) Voltage outputs between -10 and +10 volts 6) Current outputs between 0 (or 4) and 20 mA  Note: Field programming allows for numerous custom sensor configurations, however, please note that field programming can not be used to change the R-Series Analog sensor from one manufacturing build type to another.  0%  When using dual magnets, the minimum allowed distance between the magnets is 3.0 in. (76 mm) to maintain proper sensor output. Enhanced monitoring and diagnostics Sensor status and diagnostic display Integrated LEDs (green/red) provide basic visual feedback for normal sensor operation and troubleshooting.  LED \'s  Green ON ON ON Flashing  Red OFF Flashing ON ON  Description Normal function (operation mode) Magnet out of setup range Magnet not detected or wrong quantity of magnets Programming mode  Temposonics® Linear-Position Sensors Product Catalog 551075 C  8  MTS Sensors  ADVANCED COMMUNICATION AND PROGRAMMABILITY Sensor field programming  R-Series Analog handheld programmer (for single magnet sensors)  CONNECTIONS AND WIRING Sensor integral connector (D60 Male)  Male Integral D6 connector pin-out as viewed from the end of the sensor  The R-Series Analog handheld programmer (part number 253124) can be used to program the magnet positions for the start of output, (0% = 0 Vdc, -10 Vdc, 4 mA, or 0 mA), and the end of output, (100% = 10 Vdc or 20 mA), for the single magnet version of the R-Series Analog sensor.  5 4 6 3 1 2  Pin no.  1  Wire color  Gray  Function Analog outputs  Output 1/Position #1: 0 to 10, 10 to 0, -10 to +10, +10 to -10Vdc 4 to 20, 20 to 4, 0 to 20, 20 to 0 mA Return for pin 1 Output 2/Position #2 or Speed: 0 to 10, 10 to 0, -10 to +10, +10 to -10Vdc 4 to 20, 20 to 4, 0 to 20, 20 to 0 mA Return for pin 3 +24 Vdc (-15 / +20%) DC Ground (for supply)  2 3  Pink Yellow  Sensor  24 Vdc  4 5 6 Green Red or Brown White  Handheld programmer, part no. 253124  Standard factory settings place the setpoint 1 (Null) and setpoint 2 (Span) at the limits of the sensor \'s active stroke length. For example, a sensor ordered with 4 - 20 mA output will be factory set for 4 mA output at the bottom limit of the stroke length at the  Null  position. Likewise, the 20 mA output will be factory set at the top limit of the stroke range at the start of the  dead zone .  Note: When using the single channel output (pins 1 and 2), the unused pins for output 2 (pins 3 and 4) should be left floating (unconnected), unless sensor programming is being used.  Cable connectors (Field installed 6-pin D6 female)  Mates with sensor \'s Integral connector D6 straight-exit connector part no. 560700  54 mm (2.1 in.) 18 mm (0.7 in.)  Output Value  for w  ard  rev  ers  e  37 mm (1.5 in)  1 Magnet Sensor Electronics Housing Setpoint 1 (Null) Position Dead Zone Setpoint 2 (Span)  D6 90° connector part no. 560778  54 mm (2.1 in.)  Setpoint 1 and setpoint 2 can be re-positioned for the actual measuring range needed anywhere within the active stroke length. (Note: The minimum distance allowed between setpoint 1 and setpoint 2 is 25 mm (0.98 in.)). These adjustments are easily performed, even when the sensor is not directly accessible, by connecting the analog handheld programmer to the sensor \'s integral cable or extension cable. MTS Sensors Analog Field Setup user interface  MTS Sensors  9  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series Analog  MODEL RP PROFILE-STYLE SENSOR The profile-style (model RP) sensor offers modular construction, flexible mounting configurations and easy installation. Captive-sliding magnet  D60 connector option  49 mm (1.92 in.)  9.5 mm (0.37 in.)  Beginning of stroke -Null position Captive-sliding magnet 12 mm (0.47 in.)  Note: See page 58 for installed magnet dimensions.  45 mm (1.77 in.)  Sensor head  R-Series Analog  35.6 mm (1.4 in.)  50 mm (1.96 in.) 68 mm (2.67 in.)  2 mm. (0.07 in.)  12 mm (0.47 in.) 75 mm (2.95 in.) 28 mm (1.1 in.)  Mounting foot 14.5 mm (0.57 in.) Stroke length  5.5 mm (0.21 in.) dia. for M5 or #10 Screw  Dead zone 66 mm (2.6 in.)  Open-ring magnet  R05 integral cable option  Beginning of stroke - Null Position Open ring magnet 28 mm (1.1 in.) Mounting support (non-ferrous material) 28 mm (1.1 in.) Sensor head  22 mm (0.86 in.)  MODEL RH ROD-STYLE SENSOR  The rod-style (model RH) sensor offers modular construction, flexible mounting configurations, and easy installation. It is designed for internal mounting in applications where high pressure conditions exist, (5000 psi continuous, 10,000 psi spike), such as hydraulic cylinders. The Model RP sensor may also be mounted externally in many applications.  Beginning of stroke (Null position) 51 mm 68 mm (2.7 in.) (2 in.) Null zone Electronics housing O-Ring End of stroke Dead zone Stroke dependent refer to chart below  Stroke length  LED window  Integral connector  10 mm (0.39 in.) dia. 44 mm (1.7 in.) A M4 x 59 mm Button-head hex screws (2X) Flat-faced flange 25 mm (0.98 in.) Sensor rod  Note: See page 59 for mounting and magnet details.  76 mm (3 in.) Grounding lug Mating connector (6-pin DIN style)  Beginning of stroke (Null position) 51 mm (2 in.) 68 mm (2.7 in.) Null zone O-Ring A  Stroke-dependent Dead Zones Stroke length 50 mm (2 in.) - 5000 mm (197 in.) 5005 mm (197.1 in.) - 7620 mm (300 in.)  Dead zone 63.5 mm (2.5 in.) 66 mm (2.6 in.)  B 25 mm (1 in.) Raised-face flange 25 mm (0.98 in.) 2.5 mm (0.1 in.) C  Housing style Flange type T S M  Description US customary threads with raised-face flange US customary threads with flat-faced flange Metric threads with flat-faced flange  A Flange threads 3/4 -16 UNF-3A 3/4 -16 UNF-3A M18 x 1.5  B Dimensions 44.5 mm (1.75 in.) 44.5 mm (1.75 in.) 46 mm (1.81 in.)  C Dimensions 51 mm (2 in.) 51 mm (2 in.) 53 mm (2.1 in.)  MTS Sensors  Temposonics® Linear-Position Sensors Product Catalog 551075 C  10  HOW TO ORDER  3 to 7 digit code depending on output selected  R  1 RP = Profile style RH = Hydraulic rod-style RF = Flexible style HOUSING STYLE  S= V= M= Model RP profile-style sensor only (magnet included): Captive-sliding magnet with joint at top (part no. 252182) Captive-sliding magnet with joint at front (part no. 252184) Open-ring magnet (part no. 251416-2) Model RH rod-style sensor only (magnet must be ordered separately): US customary threads, raised-faced flange and pressure tube, standard US customary threads, flat-faced flange and pressure tube, standard Same as option  T , except uses fluoroelastomer seals for the electronics housing Same as option  S , except uses fluoroelastomer seals for the electronics housing Metric threads, flat-faced flange and pressure tube, standard Same as option  M , except uses fluoroelastomer seals for the electronics housing Sensor cartridge only (no flange and pressure tube, stroke length < 1830 mm (72 in.)) Model RF flex sensor only, (reference page 41 for flex housing style) magnet must be ordered separately: US customary threads, flat-faced flange Metric threads, flat-faced flange  1  2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19  SENSOR MODEL  T= S= U= H= M= V= B=  S= M=  -- -- -- -- M = Millimeters (Encode in 5 mm increments) -- -- -- . -- U = Inches and tenths (Encode in 0.1 in. increments)  STROKE LENGTH  CONNECTION TYPE  Integral connector:  Stroke length notes: 1. Profile-style sensor (model RP) stroke length = 50 mm (2 in.) - 5080 mm. (200 in.) 2. Rod-style sensor (model RH) stroke length = 50 (2 in.) - 7620 mm (300 in.)  D60 = 6-pin DIN (M16), male, standard  Integral cables:  R -- -- = Integral cable, PVC jacket, pigtail termination, standard F -- -- = Integral cable, black polyurethane jacket with pigtail termination  Cable length: -- -- = 1 (01) to 99 (99) ft. or 1 (01) to 30 (30) meters. Encode in feet if using US customary stroke length, encode in meters if using metric stroke length  Cable length note: MTS recommends the maximum integral cable length to be 10 meters (33 ft.). Cables greater than 10 meters (33 ft.) in length are available, however, proper care must be taken during handling and installation.  INPUT VOLTAGE 1 = +24 Vdc (+20% - 15%) A = Same as option  1  except includes the High Vibration-Resistant (HVR) option  Model RH only, stroke range = 50 mm (2 in.) - 2000 mm (78.7 in.), see note below  OUTPUT (13 - 19) 3 to 7 digit code depending on output selected (Please note that selections below are continued on page 12)  1 output channel with 1 magnet (3 digit code) Output #1 = magnet position V01 = 0 to +10 Vdc A01 = 4 to 20 mA V11 = +10 to 0 Vdc A11 = 20 to 4 mA V21 = -10 to +10 Vdc A21 = 0 to 20 mA V31 = +10 to -10 Vdc A31 = 20 to 0 mA Note: The High Vibration-Resistant (HVR) option provides the model RH rod-style sensors with increased resistance to shock and vibration for use in heavy duty machinery. Refer to  G-Series and R-Series Sensors for High Shock and Vibration Applications , part no. 551073 for more information.  2 output channels with 2 magnets * (3 digit code) Output #1 = magnet #1 position Output #2 = magnet #2 position V02 = 0 to +10 Vdc 0 to +10 Vdc V12 = +10 to 0 Vdc +10 to 0 Vdc V22 = -10 to +10 Vdc -10 to +10 Vdc V32 = +10 to -10 Vdc +10 to -10 Vdc A02 = 4 to 20 mA 4 to 20 mA A12 = 20 to 4 mA 20 to 4 mA A22 = 0 to 20 mA 0 to 20 mA A32 = 20 to 0 mA 20 to 0 mA  MTS Sensors  * Standard factory settings for the setpoint values are the same for both magnets, i.e. both magnets have setpoint 1 at the null position, and setpoint 2 at the start of the dead zone. If needed, the setpoint values for each magnet can be reprogrammed in the field to best fit the application, (see page 8 for more information). For proper sensor output, the minimum allowed distance between the magnets is 3 in. (76 mm).  11  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series Analog  HOW TO ORDER (CONTINUED)  3 to 7 digit code depending on output selected  13 14  15  16 17  18 19  OUTPUT (13 - 19) 3 to 7 digit code depending on output selected (Please note that selections below are continued from the previous page)  2 output channels with 1 magnet (7 digit code, fill in the blanks with the desired maximum speed value as described below) Output #1 = magnet position Output #2 = speed magnitude V01 -- -- -- -- = 0 to +10 Vdc +10 (towards head) 0 (at rest) +10 (towards tip) Vdc V11 -- -- -- -- = +10 to 0 Vdc +10 (towards head) 0 (at rest) +10 (towards tip) Vdc A01 -- -- -- -- = 4 to 20 mA 20 (towards head) 4 (at rest) 20 (towards tip) mA A11 -- -- -- -- = 20 to 4 mA 20 (towards head) 4 (at rest) 20 (towards tip) mA Output #1 = magnet position V41 -- -- -- -- = 0 to +10 Vdc V51 -- -- -- -- = +10 to 0 Vdc V61 -- -- -- -- = 0 to +10 Vdc V71 -- -- -- -- = +10 to 0 Vdc V81 -- -- -- -- = -10 to +10 Vdc V91 -- -- -- -- = +10 to -10 Vdc A41 -- -- -- -- = 4 to 20 mA A51 -- -- -- -- = 20 to 4 mA Output #2 = Velocity (speed with direction) 0 (towards head) 5 (at rest) +10 (towards tip) Vdc +10 (towards head) 5 (at rest) 0 (towards tip) Vdc -10 (towards head) 0 (at rest) +10 (towards tip) Vdc +10 (towards head) 0 (at rest) -10 (towards tip) Vdc -10 (towards head) 0 (at rest) +10 (towards tip) Vdc +10 (towards head) 0 (at rest) -10 (towards tip) Vdc 4 (towards head) 12 (at rest) 20 (towards tip) mA 20 (towards head) 12 (at rest) 4 (towards tip) mA  R-Series Analog  Output #1 = magnet position (forward-acting) V03 = 0 to +10 Vdc (3 digit code)  Output #2 = magnet position (reverse-acting) +10 to 0 Vdc  For sensor models with speed output, fill in the blanks for the desired maximum speed value as shown below. For US customary stroke lengths, encode speed for in./s as follows: -- -- -- -- = Speed output max. (fill in remaining 4 blanks with desired max. speed value) Available range for US customary stroke lengths is 1.0 to 400.0 in./s, (0010 ... 4000) Example: For max. speed of 12.0 in./s, and output produced = [-10(towards head) ... 0(at rest) ... +10(towards tip) Volts] Encode: V 6 1 0 1 2 0 or V 8 1 0 1 2 0 -------- -------- For metric stroke lengths, encode speed for m/s (range 1) or mm/s (range 2) as follows: Speed range #1, ( -- -- -- . -- ) 0 0 = Speed output max. (fill in the remaining 3 blanks with desired max. speed value) ------.-- Speed range 1 for metric stroke lengths is 0.1 to 10.0 m/s, (0001 ... 0100) Example: For max. speed of 5.5 m/s, and output produced = [+10(towards head) ... 0(at rest) ... +10(towards tip) Volts], Encode: V 0 1 -- -- -- -- 0 0 5 5 Speed range #2, ( 1 ) -------- 1 = Speed output max. (fill in remaining 3 blanks with desired max. speed value) -------- Speed range 2 for metric stroke lengths is 25 to 90 mm/s, (1025 ... 1090) Example: For max. speed of 50 mm/s, and output produced = [4(towards head) ... 12(at rest) ... 20(towards tip) mA], Encode: A 4 1 1 0 5 0 -------- Field programming notes: 1) Sensor models ordered with one output channel can not be reprogrammed in the field to provide a second output channel. 2) Sensor models ordered with positive only output voltages can not be reprogrammed in the field to include negative output voltages. 3) Sensor models ordered with both positive and negative output voltages can be reprogrammed in the field for positive only voltages, or negative only voltages, however, output resolution is then reduced.  Temposonics® Linear-Position Sensors Product Catalog 551075 C  12  MTS Sensors  ",1476);arrFiles[102]=new Array(103,"HTML/MTS-RSeries-CANbus.pdf","23 Jul 2009","MTS-RSeries-CANbus","","","R-SERIES MODELS RP/RH - CANbus  R-Series Models RP and RH Sensors CANbus Output  (CANopen and CANbasic)  I Rugged industrial sensor  I Linear, absolute measurement I LEDs for sensor diagnostics I Non-contact sensing technology I Non-linearity less than 0.01% I Repeatability within 0.001%  Parameters  Specifications (continued)  I Superior accuracy, resolution down to 2 µm  I Direct CAN output, displacement + speed I Multi-magnet position measurement  (up to 15 positions per sensor)  Parameters Measured variable: Resolution: Specifications Displacement, speed / optional: multi-magnet measurements (up to 15 magnet positions simultaneous) CANopen: Displacement Speed 5 µm 0.5 mm/s 2 µm 0.2 mm/s CANbasic: Speed Displacement 5 µm 1.0 mm/s 2 µm 0.1 mm/s < ± 0.01% full scale (minimum ± 40 µm) < ± 0.001% full scale (minimum ± 2.5 µm) Hysteresis < 4 µm Interface: CAN-Fieldbus system ISO DIS 11898 Data protocol CANopen: CIA standard DS-301 V4.02 encoder profile DS-406 V3.1 CANbasic; CAN 2.0 A Baud rate, kBit/s: 1000 800 500 250 125 50 20 Cable length, m: <25 <50 <100 <250 <500 <1000 <2500 The sensor will be supplied with ordered Baud rate which can be changed by the customer. Profile style: 50 mm (2 in.) to 5080 mm (200 in.) Rod style: 50 mm (2 in.) to 7620 mm (300 in.) +24 Vdc nominal (-15% or +20%) Polarity protection: up to -30 Vdc Overvoltage protection: up to 36 Vdc Current drain: 100 mA typical Dielectric withstand voltage: 500 Vdc (DC ground to machine ground) Connection type: Single or dual 6-pin male D60 connectors, or integral cable  PROFILE STYLE (MODEL RP) SENSOR Aluminum housing Electronic head: Diagnostic display (LED \'s located beside connector/cable exit) Sealing: IP 65 Sensor extrusion: Aluminum Mounting: Adjustable mounting feet or T-slot nut (M5 threads) in base channel Magnet type: Captive-sliding magnet or open-ring magnet ROD STYLE (MODEL RH) SENSOR Aluminum housing Electronic head: Diagnostic display (LEDs located beside connector/cable exit) Sealing: IP 67 or IP 68 for integral cable model Sensor rod with flange: 304L Stainless steel Operating pressure: 350 bar static, 690 bar spike (5000 psi static; 10,000 psi spike) Mounting: Threaded flange M18 x 1.5 or 3/4-16 UNF-3A Typical mounting torque: 45 N-m (33 ft. - lbs.) Magnet type: Ring magnet, open-ring magnet, or magnet float  Non-linearity: Repeatability: Outputs:  Stroke length: Operating voltage:  MTS Sensors  19  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series - CANbus  Operating temperature: -40 °C (-40 °F) to 75 °C (167 °F) Relative humidity: 90% no condensation Temperature coefficient <15 ppm/ °C EMC test: Emissions IEC/EN 50081-1, Immunity IEC/EN 50082-2, IEC/EN 61000-4-2/3/4/6, level 3/4 criterium A, CE qualified Shock rating: 100 g (single hit)/IEC standard 68-2-27 (survivability) Vibration rating: 15 g (30 g with HVR option)/ 10-2000 Hz/IEC standard 68-2-6 Update time: 1.0 ms up to 2400 mm, 2.0 ms up to 4800 mm, 4.0 ms up to 7600 mm stroke length  ENHANCED MONITORING AND DIAGNOSTICS Sensor status and diagnostic display Integrated LEDs (green/red) provide basic visual feedback for normal sensor operation and troubleshooting.  TEMPOSONICS CANbus VARIATIONS CANopen CANopen corresponds to encoder profile DS-406 V3.1 (CIA standard DS-301 V4.02). The CANopen functionality is described by the following three communication objects. · Service data object (SDO): The SDO is mainly used for sensor configuration. Selectable parameters are: - Resolution for position + speed - 4 set points - Preset of the operation range and the null position for four magnets · Process data object (PDO): The PDO provides real-time data transfer of sensor measurements in up to 8-byte data blocks. The sensor uses PDOs to relay information about magnet position, speed, limit status, cam control and operation range for up to four magnets. Data formats are: 32-bits for position, 16-bits for speed, and 8-bits for value limit. · PDO transmission type: Asynchronous (cycle time of 1 to 65.535 ms) or synchronous. - Synchronization Object (SYNC) - Emergency Object - Nodeguard Object · CANopen Configuration A software file is used as an Electronic Data Sheet (EDS) for sensor configuration. The EDS file is available on the mini CD that is included with the sensor, as well as, on the MTS website, at www.mtssensors.com.  Note: Conformance Test Certificate No. CiA199902-301V30/I-004 is given by the CANbus user organization CiA (CAN in Automation) for MTS CANopen sensors.  LED \'s  Green ON ON ON Red OFF Flashing ON Description Normal function Magnet out of setup range Magnet not detected Programming mode  Flashing ON  CANbus interface CANbus outputs R-Series models RP and RH linear-position sensors, as slave devices, fulfill all requirements of the CANbus (ISO 11898) protocol. The sensor \'s electronics convert the displacement measurements into bus oriented outputs and transfer this data directly to the controller. The bus interface is appropriate for serial data transfer up to 1Mbps. Sensor integrated software supports bus profiles CANopen, CANbasic and DeviceNet for a comprehensive customized configuration of the sensor-bus system. (Reference separate MTS document for DeviceNet output.) Operation modes CANbus sensors provide the following single or multi-magnet measurements: · Standard measurement: - CANbasic; Displacement + speed (using one magnet) - CANopen; Displacement + speed (using one to four magnets)  R-Series - CANbus  · Multi-magnet measurement: - CANbasic; Positions for each of two to fifteen magnets simultaneously  Single magnet sensor M1  Active stroke length (Measuring range) Position / Speed 76 mm min. (3 in.)  M1a  CANbasic (MTS) CANbasic allows a simple, flexible adaptation to customized profiles with short bus access. The CANbasic protocol complies with CAN 2.0A standard and includes applications data for single-magnet measurement (position, speed, sensor status and five setpoints). CANbasic (multi-magnet measurement)  Multi-magnet sensor  M0 M1  M2  M3  M4  CANbasic provides position measurement on a single sensor using a maximum of fifteen magnets. Setup and operation are accomplished through the on-site control system. CANopen address programmer accessory The CANopen address programmer is used to setup the NodeAddress for sensors with the CANopen interface. This setup is usually completed by the bus \' LMT/LSS-Service. If the master system or customer controller does not support this service, connecting the the CANopen Address Programmer to the sensor will bypass the service and allow direct setup. A 24 Vdc power supply connected to the sensor (customer supplied) is required in order to use the programmer.  Position  Temposonics® Linear-Position Sensors Product Catalog 551075 C  20  MTS Sensors  TEMPOSONICS CANbus VARIATIONS CANopen address programmer installation To install and use the CANopen handheld programmer, follow the steps below: 1. Disconnect the bus wiring and power supply. 2. Connect the handheld programmer to the sensor. 3. Connect the power supply to the sensor. The node-address displays. 4. Select a new node-address and apply the new setting by pressing the button. 5. Disconnect the power and programmer. 6. Displaying and programming must be completed in hexadecimal values. Programming is limited to the legal values from 01 to 7F (1 to 127). The factory default is 7F (127).  CANbus handheld programmer (part no. 252382-D62)  CONNECTIONS AND WIRING Sensor integral connector (for single D60 and for dual D62)  Male Integral D6 connector pin-out as viewed from end of the sensor Pin no. 1 2 3 4 5 6 Wire color Gray Pink Yellow Green Red or Brown White Function CAN (-) CAN (+) n.c. n.c. +24 Vdc (-15 / + 20%) DC Ground (for supply)  5 4 6 3 1 2  Cable connectors (field installed 6-pin D6 female)  D6 straight-exit connector (PG9 size strain relief for 8 mm max. cable dia.) part no. 370423  54 mm (2.1 in.) 18 mm (0.7 in.)  CANbus programmer connections D6 90° connector part no. 560778  38 mm (1.5 in.)  Female cable connector Wiring see below Handheld Programmer Sensor head, Connector outlet D62 Pin 1 2 3 4 5 6 Function n.c. n.c n.c. n.c. +24 Vdc DC Ground  54 mm (2.1 in.)  Sensor Integral connector (male) pin-out as viewed from the end of the sensor.  MTS Sensors  21  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series - CANbus  MODEL RP PROFILE-STYLE SENSOR Captive-sliding magnet  49 mm 1.92 in.) 9.5 mm (0.37 in.) Beginning of stroke - Null position Captive-sliding magnet 12 mm (0.47 in.)  Note: See page 58 for installed magnet dimensions.  45 mm (1.77 in.)  Sensor head  2 mm (0.07 in.)  D60 connector  35.6 mm (1.4 in.)  50 mm (1.96 in.) 68 mm (2.67 in.)  13 mm (0.51 in.) 76 mm (3 in.) 28 mm (1.1 in.)  Mounting foot 14.5 mm (0.57 in.) Stroke length  5.5 mm (0.21 in.) dia. for M5 or #10 screw  Dead zone 66 mm (2.6 in.)  Open-ring magnet  P05 Integral cable option  Beginning of stroke - Null Position Open-ring magnet 28 mm (1.1 in.) Mounting support (non-ferrous material) 28 mm (1.1 in.) Sensor head  22 mm (0.86 in.)  MODEL RH ROD-STYLE SENSOR  The rod-style (Model RH) sensor offers modular construction, flexible mounting configurations, and easy installation. It is designed for internal mounting in applications where high pressure conditions exist, (5000 psi continuous, 10,000 psi spike), such as hydraulic cylinders. The Model RH sensor may also be mounted externally in many applications.  Note: See page 57 for mounting and magnet details.  81 mm (3.2 in.) Electronics Housing 25 mm (0.98 in.)  Beginning of stroke (Null Position)  R-Series - CANbus  Rod 10 mm (0.39 in.) dia. End of stroke  D62 Connector Option  D60 Connector Option  13 mm (0.51 in.)  Flat-faced flange  A O-Ring 51 mm (2 in.) Null Zone  Stroke length  Dead zone Stroke dependent Refer to chart below  Raised-faced flange  51 mm (2 in.) Null zone O-Ring A  Stroke dependent Dead Zones Stroke length 50 mm (2 in.) - 5000 mm (197 in.) 5005 mm (197.1 in.) - 7620 mm (300 in.)  Dead Zone 63.5 mm (2.5 in.) 66 mm (2.6 in.)  B  25 mm (1 in.)  PO5 Integral cable option  22 mm (0.87 in.)  2.5 mm (0.1 in.)  25 mm (0.98 in.)  C  Beginning of stroke (Null position)  Housing style Flange type T S M  Description US customary threads with flat-faced flange Metric threads with flat-faced flange  A Flange threads 3/4 -16 UNF-3A M18 x 1.5  B Dimensions 44.5 mm (1.75 in.) 44.5 mm (1.75 in.) 46 mm (1.81 in.)  C Dimensions 51 mm (2 in.) 51 mm (2 in.) 53 mm (2.1 in.)  US customary threads with raised-face flange 3/4 -16 UNF-3A  Temposonics® Linear-Position Sensors Product Catalog 551075 C  22  MTS Sensors  HOW TO ORDER  R  1 2 3 4 5 6 7 8 9 10 11  1  12  C  13 14 15 16 17 18 19  Z  20 21 22  SENSOR MODEL RP = Profile style RH = Hydraulic rod-style RF = Flexible style HOUSING STYLE  S= V= M= Model RP profile-style sensor only (magnet included): Captive-sliding magnet with joint at top (part no. 252182) Captive-sliding magnet with joint at front (part no. 252184) Open-ring magnet (part no. 251416-2) Model RH rod-style sensor only (magnet must be ordered separately): US customary threads, raised-faced flange and pressure tube, standard US customary threads, flat-faced flange and pressure tube, standard Same as option  T , except uses fluoroelastomer seals for the electronics housing Same as option  S , except uses fluoroelastomer seals for the electronics housing Metric threads, flat-faced flange and pressure tube, standard Same as option  M , except uses fluoroelastomer seals for electronics housing Sensor cartridge only, no flange and pressure tube, stroke length < 1830 mm (72 in.) Model RF flex sensor only, (reference page 41 for flex housing style): magnet must be ordered separately: US customary threads, flat-faced flange Metric threads, flat-faced flange  T= S= U= H= M= V= B=  S= M=  Stroke length notes: 1. Profile-style sensor (model RP) stroke length = 50 mm (2 in.) - 5080 mm (200 in.) 2. Rod-style sensor (model RH) stroke length = 50 mm (2 in.) - 7620 mm (300 in.) Cable length note: MTS recommends the maximum integral cable length to be 10 meters (33 ft.). Cables greater than 10 meters (33 ft.) in length are available, however, proper care must be taken during handling and installation.  CONNECTION TYPE  Integral connector:  D60 = Single 6-pin DIN (M16), male, standard D62 = Dual 6-pin DIN (M16), male  Integral cable:  P_ _ = PUR Integral cable with pigtail termination, standard.  Cable length: _ _ = 1 (01) to 30 (30) meters or 1 (01) to 99 (99) ft. Encode in meters if using metric stroke length, encode in feet if using US customary stroke length  1 = +24 Vdc (+20%, -15%) A = Same as option  1 , except includes the High Vibration-Resistant (HVR) option  Model RH sensor only, stroke length = 50 mm (2 in.) - 2000 mm (78.7 in.)see note  INPUT VOLTAGE  OUTPUT C_ _ _ _ _ _ = CANbus output (fill in the six blanks with the following codes):  a b c d e f  Note: The High Vibration-Resistant (HVR) option provides the model RH rod-style sensors with increased resistance to shock and vibration for use in heavy duty machinery. Refer to  G-Series and R-Series Sensors for High Shock and Vibration Applications , part no. 551073 for more information.  a, b, c = CANbus hardware and protocol code: 101 = Single magnet - CANbasic (MTS) 207 = Multi-magnet 304 = CANopen NUMBER OF MAGNETS  (for multi-position measurement only)  d = Baud rate: 1 = 1000 kBit/s 2 = 500 kBit/s 3 = 250 kBit/s 4 = 125 kBit/s  e = Resolution: 1 = 0.005 mm (0.0002 in.) 2 = 0.002 mm (0.00008 in.)  f = Cycle time: 1 = Standard  Z_ _ = Number of magnets for output C207 (range 02 to 15).  Order additional magnets separately for multi-position measurements. More than 15 magnets requires application engineering approval CANbus EDS files are available on the Temposonics website at www.mtssensors.com.  MTS Sensors  23  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series - CANbus  STROKE LENGTH _ _ _ _ M = Millimeters (Encode in 5 mm increments) _ _ _ . _ U = Inches and tenths (Encode in 0.1 in. increments)  R-Series - CANbus  Temposonics® Linear-Position Sensors Product Catalog 551075 C  24  MTS Sensors  ",1109);arrFiles[103]=new Array(104,"HTML/MTS-RSeries-DeviceNet.pdf","24 Jul 2009","MTS-RSeries-DeviceNet","","","R-SERIES MODELS RP/RH - DeviceNet  R-Series Models RP and RH Sensors DeviceNet Output  I Rugged industrial sensor  I Linear, absolute measurement I LEDs for sensor diagnostics I Non-contact sensing technology I Non-linearity less than 0.01% I Repeatability within 0.001% I Direct DeviceNet output  Parameters Operating voltage:  Specifications (continued)  I Superior accuracy, resolution down to 2 µm  Controller Area Network (CAN) is a standard for device level communications and the foundation of fieldbus systems like DeviceNet, CANopen and CANbus.These fieldbus systems can provide high speed transmission appropriate for position indication and for motion control in industrial applications. DeviceNet allows users to interface up to 64 devices using a single cable, thus eliminating the need for conventional methods of multiple wire runs. DeviceNet provides a way to define how, and in which priority, data will be transmitted over the network. The result is a lower complexity, cost-effective communications network linking industrial measurement and control devices. Together, the open DeviceNet protocol and the MTS  smart  R-Series sensors offer an effective, high-precision data transfer system that is well suited for industrial automation.  Parameters Measured variable: Resolution: Non-linearity: Repeatability: Output: Specifications Displacement 2 µm or 5 µm < ± 0.01% full scale (minimum ± 40 µm) < ± 0.001% full scale (minimum ± 2.5 µm) Hysteresis < 4 µm Interface: CAN-Fieldbus system ISO 11898 Data protocol: DeviceNet release 2.0 Baud rate, kBit/s: 500 250 125 Cable length, m: <100 <250 <500 The sensor will be supplied with ordered Baud rate which can be changed by the customer. Profile style: 50 mm (2 in.) to 5080 mm (200 in.) Rod style: 50 mm (2 in.) to 7620 mm (300 in.)  +24 Vdc nominal: -15% or +20% Polarity protection: up to -30 Vdc Overvoltage protection: up to 36 Vdc Current drain: 90 mA typical Dielectric withstand voltage: 500 Vdc (DC ground to machine ground) Connection type: 5-pin male D51 DeviceNet connector Operating temperature: - 40 °C (-40 °F) to 75 °C (167 °F) Relative humidity: 90% no condensation Temperature coefficient <15 ppm/ °C EMC test: Emissions IEC/EN 50081-1, Immunity IEC/EN 50082-2, IEC/EN 61000-4-2/3/4/6, level 3/4 criterium A, CE qualified Shock rating: 100 g (single hit)/IEC standard 68-2-27 (survivability) Vibration rating: 15 g (30 g with HVR option)/ 10-2000 Hz/IEC standard 68-2-6 Update time: 0.5 ms up to 1200 mm, 1.0 ms up to 2400 mm, 2.0 ms up to 4800 mm, 4.0 ms up to 7600 mm stroke length PROFILE STYLE (MODEL RP) SENSOR Aluminum housing Electronic head: Diagnostic display (LED \'s located beside connector) Sealing: IP 65 Sensor extrusion: Aluminum Mounting: Adjustable mounting feet or T-slot nut (M5 threads) in base channel Magnet type: Captive-sliding magnet or open-ring magnet ROD STYLE (MODEL RH) SENSOR Aluminum housing Electronic head: Diagnostic display (LEDs located beside connector) Sealing: IP 67 Sensor rod with flange: 304L Stainless steel Operating pressure: 350 bar static, 690 bar spike (5000 psi static; 10,000 psi spike) Mounting: Threaded flange M18 x 1.5 or 3/4-16 UNF-3A Typical mounting torque: 45 N-m (33 ft. - lbs.) Magnet type: Ring magnet, open-ring magnet, or magnet float  Stroke length:  MTS Sensors  25  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series - DeviceNet  DEVICENET OUTPUT DeviceNet protocol R-Series models RP and RH linear-position sensors as slave devices fulfill all requirements of the CANbus (ISO 11898) standard. The sensors electronics and integrated software implement the DeviceNet protocol to convert the displacement measurements into bus oriented outputs and transfer this data directly to the controller.The DeviceNet protocol is appropriate for serial data transfer up to 500 kBit/sec. When using the DeviceNet protocol with R-series models RP and sensors, functionality always includes but is not limited to the following: · Position · Error Detection · Polling & bit-strobe communications modes Plug and play R-Series sensors with DeviceNet output can be directly connected to a DeviceNet network. The plug and play design makes installation quick and easy. The sensor acts as a  slave  device that transmits its position and status data upon request to the  master  device such as a PLC or IPC. After initial system configuration, the user is not required to have extensive knowledge concerning network timing and sensor technology to execute operations within DeviceNet environment. Sensor-specific parameters are installed into the network using the Electronic Data Sheet (EDS). To obtain the EDS, go to www.mtssensors.com. There are only two programmable parameters, which are, the node identifier and the baud rate. If desired, a PC programming tool, such as DeviceNet Manager offered by Allen Bradley, can be used to change their values. The node identifier is factory set at node 63. Enhanced monitoring and diagnostics Bi-color LEDs in the cover of the sensor head provide visual feedback for normal sensor operation and for DeviceNet communications.  CONNECTIONS AND WIRING Cable connectors (field-installed female micro DeviceNet)  Micro 90° connector part no. 370376  37 mm (1.5 in)  41 mm (1.6 in.)  Micro straight-exit connector part no. 370375  55 mm (2.2 in.) 20 mm (0.8 in.)  Notes: 1. Appropriate grounding of cable shield is required at the controller end. 2. Molded extension cables are available from third-party vendors.  Sensor integral connector 5-pin (D51) male  Wiring Pin no. 1 2 3 4 5 Function Shield +24 Vdc (+20% / -15%) DC Ground (for supply) CAN (+) CAN (-)  2  3  5  1  4  Male D51 connector pin-out as viewed from the end of the sensor.  Network Status LED  R-Series - DeviceNet  Module Status LED  Network Status LED Green Green flashing Red Red flashing Normal function Waiting for instructions from DeviceNet master. Initialing error No answer from DeviceNet master  Module Status LED green Normal function Red Magnet not detected  Temposonics® Linear-Position Sensors Product Catalog 551075 C  26  MTS Sensors  MODEL RP PROFILE-STYLE SENSOR Captive-sliding magnet  Beginning of stroke - Null position 49 mm (1.9 in.) 9.5 mm (0.37 in.) 63 mm (2.5 in.) 45 mm (1.77 in.) 12 mm (0.47 in.)  Note: See page 58 for installed magnet dimensions.  Sensor head Metal connector  2 mm (0.07 in.)  35.6 mm (1.4 in.)  50 mm (1.96 in.) 68 mm (2.67 in.)  18 mm (0.7 in.) 81 mm (3.2 in.) 28 mm (1.1 in.)  Mounting foot 14.5 mm (0.57 in.) Stroke length  5.5 mm (0.21 in.) for M5 or #10 screw  Dead zone 66 mm (2.6 in.)  Open-ring magnet  Beginning of stroke - Null position 28 mm (1.1 in.) Mounting support (non-ferrous material) 28 mm (1.1 in.) Sensor head  MODEL RH ROD-STYLE SENSOR  The rod-style (Model RH) sensor offers modular construction, flexible mounting configurations, and easy installation. It is designed for internal mounting in applications where high pressure conditions exist, (5000 psi continuous, 10,000 psi spike), such as hydraulic cylinders. The Model RH sensor may also be mounted externally in many applications.  Null 51 mm (2 in.) 63 mm (2.5 in.) 44 mm (1.7 in.) Electronics housing Metal connector O-Ring 10 mm (0.394 in.) dia. Stroke length Dead zone (Stroke dependent) refer to chart below  49 mm (1.9 in.)  86 mm (3.4 in.)  25 mm (0.98 in.)  Note: See page 57 for mounting and magnet details.  Null 51 mm (2 in.) 25.4 mm (1 in.) Electronics housing  Stroke dependent Dead Zones Stroke length 50 mm (2 in.) - 5000 mm (197 in.) 5005 mm (197.1 in.) - 7620 mm (300 in.)  Dead Zone 63.5 mm (2.5 in.) 66 mm (2.6 in.)  B Beginning of stroke - Null position A O-Ring  Raised-face flange 2.5 mm (0.10 in.)  25 mm (0.98 in.)  C  Housing style Flange type T S M  MTS Sensors  Description US customary threads with raised-face flange US customary threads with flat-faced flange Metric threads with flat-faced flange  A Flange threads 3/4 -16 UNF-3A 3/4 -16 UNF-3A M18 x 1.5  B Dimensions 44.5 mm (1.75 in.) 44.5 mm (1.75 in.) 46 mm (1.81 in.)  C Dimensions 51 mm (2 in.) 51 mm (2 in.) 53 mm (2.1 in.)  27  Temposonics®  Linear-Position Sensors Product Catalog 551075 C  R-Series - DeviceNet  18 mm (0.7 in.)  Beginning of stroke (Null position) A Flat-faced flange  End of stroke  HOW TO ORDER  R  1 2 3 4 5 6 7 8  D 5  9 10  1  11  1  12  C 2  13 14  0  2  17 18  1  19  15 16  RP = Profile style RH = Hydraulic rod-style RF = Flexible style HOUSING STYLE  S= V= M= Model RP profile-style sensor only (magnet included): Captive-sliding magnet with joint at top (part no. 252182) Captive-sliding magnet with joint at front (part no. 252184) Open-ring magnet (part no. 251416-2) Model RH rod-style sensor only (magnet must be ordered separately): US customary threads, raised-faced flange and pressure tube, standard US customary threads, flat-faced flange and pressure tube, standard Same as option  T , except uses fluoroelastomer seals for electronics housing Same as option  S , except uses fluoroelastomer seals for electronics housing Metric threads, flat-faced flange and pressure tube, standard Same as option  M , except uses fluoroelastomer seals for electronics housing Sensor cartridge only (no flange and pressure tube, stroke length < 1830 mm (72 in.) Model RF flex sensor only, (reference page 41 for flex housing style): magnet must be ordered separately: US customary threads, flat-faced flange Metric threads, flat-faced flange  SENSOR MODEL  T= S= U= H= M= V= B=  S= M=  STROKE LENGTH _ _ _ _ M = Millimeters (Encode in 5 mm increments) _ _ _ . _ U = Inches and tenths (Encode in 0.1 in. increments) CONNECTION TYPE  Integral connector:  Stroke length notes: 1. Profile-style sensor (model RP) stroke length = 50 mm (2 in.) - 5080 mm (200 in.) 2. Rod-style sensor (model RH) stroke length = 50 mm (2 in.) - 7620 mm (300 in.)  D51 = 5-pin Micro DeviceNet, male, standard 1 = +24 Vdc (+20% - 15%) A = Same as option  1 , except includes the High Vibration-Resistant (HVR) option  Model RH sensor only, stroke length = 50 mm (2 in.) - 2000 mm (78.7 in.) see note  INPUT VOLTAGE  R-Series - DeviceNet  OUTPUT C _ _ _ _ _ _ = CANbus output w/DeviceNet Protocol (Fill in the six blanks with the following codes: abcdef  a) Hardware 2 = Standard  Note: The High Vibration-Resistant (HVR) option provides the model RH rod-style sensors with increased resistance to shock and vibration for use in heavy duty machinery. Refer to  G-Series and R-Series Sensors for High Shock and Vibration Applications , part no. 551073 for more information.  02 = DeviceNet  b,c) DeviceNet Protocol code  2 = 500 kBits/s 3 = 250 kBits/s 4 = 125 kBits/s  d) Baud rate  1 = 5 µm (0.0002 in.) 2 = 2 µm (0.00008 in.)  e) Resolution  1 = Standard  f) Cycle time  DeviceNet EDS files are available on the Temposonics website at www.mtssensors.com  Temposonics® Linear-Position Sensors Product Catalog 551075 C  28  MTS Sensors  ",649);arrFiles[104]=new Array(105,"HTML/MTS-RSeries-Profibus.pdf","28 Jul 2009","Unknown","","","R-SERIES PROFIBUS-DP  R-Series Model RP and RH Sensors Profibus-DP Output  I Rugged industrial sensor I Linear, absolute measurement I LEDs for sensor diagnostics I Non-contact sensing technology I Superior accuracy, resolution up to 5 µm I Non-linearity less than 0.01% I Repeatability within 0.001% I Direct Profibus-DP output, displacement  Parameter EMC test: Shock rating: Vibration rating: Connection type:  Specification (continued) Emissions IEC/EN 50081-1, Immunity IEC/EN 50082-2, IEC/EN 61000-4-2/3/4/6, level 3/4 criterium A, CE qualified 100 g (single hit)/IEC standard 68-2-27 (survivability) 15 g/10-2000 Hz/IEC standard 68-2-6 D63 option: 2 x 6-pin connectors (M16) one male, one female. D53 option: 2 x 5-pin connectors (M12) one male, one female, plus 1 x 4-pin connector (M8) male.  + speed  I Multi-magnet position measurement  (up to 15 positions per sensor)  Parameter Measured variable: Resolution: Specification Displacement, speed / optional: multi-magnet measurements (up to 15 magnet positions or 5 positions + velocities) Displacement: 5 µm / other values selectable via GSD-file Speed: For 5 µm displacement resolution; 0.64 mm/s up to 500 / 0.43 mm/s up to 2000 / 0.21 mm/s up to 4500 / 0.14 mm/s up to 7600 mm stroke length 0.5 ms at 500 mm / 1 ms at 2000 mm / 2 ms at 4500 mm / 3.1 ms at 7600 mm stroke length. Each additional magnet add 0.05 ms. Add 0.03 ms for approximate values for speed measurements. < ± 0.01% full scale (minimum ± 50 µm) < ± 0.001% full scale (minimum ± 2.5 µm) Hysteresis: < 4 µm Interface: Profibus-DP system ISO 74498 Data format: Profibus-DP (EN 50 170) Data transmission rate: 12 Mbit/s max. Profile style: 50 to 5080 mm (2 to 200 in.) Rod style: 50 to 7620 mm (2 to 300 in.) +24 Vdc nominal (-15 or +20%) Polarity protection: up to -30 Vdc Overvoltage protection: up to 36 Vdc Current drain: 90 mA typical Dielectric withstand voltage: 500 V (DC ground to machine ground) Temperature: - 40 to +75 °C, (-40 to +167 °F) Relative humidity: 90% no condensation Temperature coefficient: < 15 ppm / °C  PROFILE STYLE (RP MODEL) Electronic head: Aluminum housing Diagnostic display (LED \'s beside connectors) Sealing: IP 65 Sensor extrusion: Aluminum (Temposonics profile style) Mounting: Adjustable mounting feet or T-slot nut (M5 threads) in base channel Magnet type: Captive-sliding magnet or floating (open ring) magnet ROD STYLE (RH MODEL) Electronic head: Sealing: Sensor rod with flange: Operating pressure: Mounting: Typical mounting torque: Magnet type:  Update time (one magnet):  Aluminum housing Diagnostic display (LED \'s beside connectors) IP 67 304L Stainless steel 350 bar static, 690 bar spike (5000 psi static; 10,000 psi spike) Any orientation. Threaded flange M18 x 1.5 or 3/4-16 UNF-3A 45 N-m (33 ft. - lbs.) Ring magnet, floating (open ring) magnet, or magnet float  Non-linearity: Repeatability: Outputs:  Measuring range: Operating voltage:  Operating conditions:  25  Industrial Product Catalog 551075 B  R-Series Profibus-DP  ENHANCED MONITORING AND DIAGNOSTICS Sensor status and diagnostic display Integrated LEDs (green/red) provide basic visual feedback for normal sensor operation and troubleshooting.  LED \'s  Green ON ON Flashing Flashing Red OFF ON OFF ON Description Normal function Magnet not detected or wrong quantity of magnets Waiting for master parameters Programming mode  Profibus operation modes Profibus sensors provide measurements using one or multiple magnets. The following operation modes are available: · Standard measurement: - Position measurement (using one magnet) · Multi-magnet measurement: - Position measurement of up to fifteen magnets simultaneously. - Position and speed of five magnets maximum.  Single magnet sensor M1  Profibus interface Profibus -DP interface Temposonics R-Series models RP and RH linear-position sensors fulfill all requirements of Profibus-DP (EN 50170) protocol. The sensor achieves absolute position measuring with direct transmission of serial, bit synchronous data in RS-485 standard to control units in a baud rate of 12 Mbps maximum. The Profibus-DP interface includes the Siemens bus controller SPC3. In addition to applications transmission, Profibus-DP provides powerful functionality for diagnostics and configuration, which is loaded into the bus when using the GSD electronic device data sheet. Sensor Output / Parameters Profibus-DP sensors correspond to DP-slave Class 2 with the following features: · Sensor output: - Absolute position measurement - Speed measurement - Sensor status - Error detection (e.g. magnet status) · Selectable parameters: - Offset / preset for each magnet - Measuring direction; forward/reverse - Different data formats  Active stroke length (Measuring range) Displacement / Speed 75 mm min. (3.0 in.)  M1a  R-Series Profibus-DP  Multi-magnet sensor  M0 M1  M2  M3  M4  Displacement / speed  Data exchange With multi-magnet measurement, 1 status byte and 3 bytes of position data for each position are transmitted. The status byte consists of two modes, magnet on (0 hex) or magnet off/missing magnet (8 hex). Dependent of sensor parameters, sensor data can be transferred in different data formats, (e.g. Intel® or Motorola®). Profibus address programmer accessory The Profibus address programmer is used to setup the sensor \'s slave address. Addressing is usually performed by the Profibus SetSlaveAddress command. If the master system or controller does not support this service, connecting the Profibus Address Programmer to the sensor will bypass the service and allow direct setup. Profibus address programmer installation To install and use the Profibus-DP D63 or D53 programmer, follow the steps below: 1. Disconnect the bus wiring and power supply. 2. Connect the handheld programmer to the sensor. 3. Connect the power supply to the sensor. The slave address displays. 4. Select a new slave address and apply the new setting by pressing the button. 5. Disconnect the power and programmer. 6. Displaying and programming must be completed in hexadecimal values. Programming is limited to the legal values of 03 to 7D, (3 to 125) Profibus sensors are supplied with the setup address of 7D, (125). 26  Industrial Product Catalog 551075 B  ENHANCED MONITORING, DIAGNOSTICS AND CONNECTIONS Profibus address programmer installation (continued)  D53 programmer part no. 252173-D53  SENSOR CONNECTIONS AND WIRING Bus connections (continued) D53 connector option A separate cable is used for the bus and for the supply voltage.  D53 connections Power Supply Connector Handheld Programmer Sensor head  D53 connector option with the  T  connector A  T  connector is used with the separate bus cable to enable the bus to remain active when a sensor is disconnected.  Sensor \'s Integral connector (4-pin male), pinout as viewed from the end of the sensor.  D63 programmer part no. 252173-D63  D63 cable connector and wiring diagram Pin-out/wire color code, D63 (Shielded hybrid cable for bus and input voltage)  Integral D63 connector (male/female) as viewed from end of sensor D63 connections Female Connector Wiring see below Handheld Programmer  Sensor head  Male Pin-out/wire color code  Function n.c. n.c n.c. n.c. +24 Vdc DC Ground  Female  Sensor \'s Integral connector (6-pin male), pin-out as viewed from the end of the sensor.  Pin 1 2 3 4 5 6  Pin no. 1 2 3 4 5 6 N/A  Wire color Green Red N/A N/A Black Blue Yellow/Green  Bus connections D63 connector option A shielded hybrid cable is used for both bus and supply voltage connections. This provides convenient daisy-chain connections for multiple Profibus sensors.  Function RxD/TxD-N (Bus) RxD/TxD-P (Bus) DGnd (Bus termination)* VP (Bus termination)* +24 Vdc (-15 / +20%) DC Ground (0V) Shielding, machine ground * Signal connections for the sensor \'s female connector only  Cable connectors, ( Field-installed D63) 1) 6-pin DIN female connector with PG9 strain relief Part number 370423 2) 6-pin DIN male connector with PG9 strain relief Part number 370427  Ø18 mm (0.70 in.)  6-pin Profibus Bus terminator Part number 252347  27  Industrial Product Catalog 551075 B  R-Series Profibus-DP  Pin 1 2 3 4  Power Supply +24 Vdc (+20% / -15%) n.c DC Ground n.c.  SENSOR CONNECTIONS AND WIRING D53 Bus connector and wiring diagram Pin-out/wire color code, D53  Integral D53 Bus connector (male/female) as viewed from end of sensor  1 2 5 3 4 2 1 4 3  Male  Female  Male  Pin-out/wire color code  Pin no. 1 2 3 4 5 Wire color N/A Green N/A Red Shield Function VP+5 (Bus termination)* RxD/TxD-N (Bus) DGnd (Bus termination)* RxxD / TxD-P (Bus) Shield * Signal connections for the sensor \'s female connector only  Input voltage  Pin no. 1 2 3 4 Wire color Brown White Blue Black Function +24V Vdc (-15 / +20%) n.c. DC Ground (0V) n.c.  Cable connectors, (field-installed D53)  5-pin Profibus T-connector M12 Part number 560887  4-pin female connector (M8) Straight exit connector input voltage Part number 370504  R-Series Profibus-DP  ø19.6 mm  (0.77 in.)  5-pin Profibus female connector (M12) Part number 560885  4-pin female connector (M8) input voltage (insert adjustable in 90° positions) Part number 560886  5-pin Profibus male connector (M12) Part number 560884  5-pin Profibus Bus terminator (M12) Part number 560888  54 mm (2.12 in.) 40 mm (1.57 in.)  5-pin male connector (M12) 90° exit connector Part number 370515 5-pin female connector (M12) 90° exit connector Part number 370514  54 mm (2.12 in.) 38 mm (1.50 in.)  Industrial Product Catalog 551075 B  28  MODEL RP PROFILE-STYLE SENSOR Captive-sliding magnet  Note: See page 54 for installed magnet dimensions.  49 mm (1.9 in.)  Beginning of stroke (Null position) 14 mm (0.5 in.) 90 mm (3.5 in.) Electronics housing Stroke length 12 mm (0.47 in.) Null zone  End of stroke 82 mm (3.2 in.) Dead zone  LED window  D63 connector option  45 mm (1.77in.)  1.9 mm (0.075 in.)  35.6 mm (1.40 in.) 50 mm (1.96 in.) 68 mm (2.67 in.)  Mounting foot part no. 400802 O 5.5 mm (0.21in.) for M5 or #10 screw  14.5 mm (0.57 in.)  Profile-style aluminum extrusion  Mounting foot part no. 400802  Floating magnet (open ring)  28 mm (1.10 in.) Null zone Stroke length Non-ferrous mounting support and screws 66 mm (2.6 in.) Dead zone  D53 connector option  28 mm (1.10 in.) 19 mm (0.75 in.) 100 mm (3.9 in.)  Floating magnet Style M part no. 251416-2 Beginning of stroke End of stroke (Null position)  The Temposonics R-Series rod-style sensor (Model RH) offers modular construction, flexible mounting configurations, and easy installation. It is designed for internal mounting in applications where high pressure conditions exist, (5000 psi continuous, 10,000 psi spike), such as hydraulic cylinders. The Model RH sensor may also be mounted externally in many applications.  Note: See page 53 for mounting and magnet details.  14 mm (0.6 in.) 25 mm (0.98 in.)  Beginning of stroke (Null position) Ring magnet  End of stroke  Rod O 10 mm (0.39 in.)  Electronics Housing  A  D63 Connector option  Flat-faced flange  95 mm (3.7 in.)  O-Ring 50.8 mm (2.00 in.) Null zone  Stroke length  Dead zone Stroke dependent (refer to chart below)  49 mm (1.9 in.)  105 mm (4.1 in.)  Nu ll 50.8 mm (2.00 in.) 25.4 mm (1.00 in.)  Stroke -dependent Dead Zones Stroke length Dead Zone 50 - 5000 mm (2 - 197 in.) 63.5 mm (2.5 in.) 5005 - 7620 mm (197.1 - 300 in.) 66 mm (2.6 in.)  44 mm (1.7 in.)  Electronics housing  19 mm (0.7 in.)  D53 Connector option Housing style Flange type T S M  Raised-face hex flange 2.5 mm (0.10 in.)  25 mm (0.98 in.)  Beginning of stroke (Null position) O-Ring  Description  A Flange threads  B Dimensions  C Dimensions  B  US customary threads with raised-face hex 3/4 -16 UNF-3A 44.5 mm (1.75 in.) 51 mm (2.0 in.) US customary threads with flat-faced hex Metric threads with flat-faced hex 3/4 -16 UNF-3A 44.5 mm (1.75 in.) 51 mm (2.0 in.) M18 x 1.5 46 mm (1.81 in.) 53 mm (2.1 in.)  C  Industrial Product Catalog 551075 B  29  R-Series Profibus-DP  MODEL RH ROD-STYLE SENSOR  HOW TO ORDER  R  1 2 3 4 5 6 7 8 9 10 11  1  12  P  13 14 15 16  Z  17 18 19  SENSOR MODEL RP = Profile style RH = Hydraulic rod style RF = Flexible style HOUSING STYLE  Model RP sensor only (magnet included): S= Captive-sliding magnet with joint at top (part number 252182) V= Captive-sliding magnet with joint at front (part number 252184) M = Floating magnet open ring (part number 251416-2) Models RH and LF sensors only (magnet must be ordered separately): T = US customary threads, raised-faced hex, and pressure tube S = US customary threads, flat-faced hex, and pressure tube M = Metric threads, flat-faced hex, and pressure tube B = Sensor cartridge only (No pressure tube, stroke lengths  72 in.). Model RF sensor only, (reference section on flex housing style), magnet must be ordered separately: S = US customary threads, flat-faced hex M = Metric threads, flat-faced hex  STROKE LENGTH _ _ _ _ M = Millimeters (Encode in 5 mm increments) _ _ _ . _ U = Inches and tenths (Encode in 0.1 in. increments)  Stroke length notes: RH stroke range = 50 - 7620 mm (2 - 300 in.) RP stroke range = 50 - 5080 mm (2 - 200 in.)  R-Series Profibus-DP  CONNECTION TYPE D63 = 2 x 6 pin DIN, male/female (M16) standard D53 = 2 x 5 pin, male/female (M12), plus 4-pin male (M8). INPUT VOLTAGE 1 = +24 Vdc (+20%, -15%) OUTPUT P_ _ _ = Profibus protocol (Fill in the three blanks with the following codes): 101 = Multi-magnet (multi-position measurement) max. 15 positions. 102 = Single magnet (standard) 103 = Position, velocity (max. 5 positions//velocities) NUMBER OF MAGNETS  (For multi-position measurement only)  Z _ _ = Number of magnets for output P101 (range 02 to 15), or for output P103 (range 02 to 05).  Order additional magnets separately for multi-position measurement.  Industrial Product Catalog 551075 B  30  ",1122);arrFiles[105]=new Array(106,"HTML/MTS-RSeries-EtherCAT.pdf","28 Jul 2009","MTS-RSeries-EtherCAT","","","R-SERIES MODELS RP/RH SENSORS - EtherCAT®  R-Series Models RP and RH Sensors EtherCAT® Industrial Ethernet Interface  I Rugged industrial sensor  I Linear, absolute measurement I LEDs for sensor diagnostics I Non-contact sensing technology I 100 µsec update rate  Parameters EMC test (Pending): Shock rating: Vibration rating: Connection type:  Specifications (continued) Emissions IEC/EN 50081-1, Immunity IEC/EN 50082-2, IEC/EN 61000-4-2/3/4/6, level 3/4 criterium A, CE qualification pending. 100 g (single hit)/IEC standard 68-2-27 (survivability) 15 g/10-2000 Hz/IEC standard 68-2-6 D56 option: 2 x 4-pin connectors (M12) female. plus 1 x 4-pin connector (M8) male.  I Superior accuracy, resolution down to 1 µm I Non-linearity less than 0.01% I Repeatability within 0.001% I Direct EtherCAT interface, displacement + speed I Multi-magnet position measurement  (up to 20 positions per sensor)  Parameters Measured variable: Resolution: Specifications Displacement / Velocity 1-5 measurement option 1-20 magnet measurement Displacement: 1 to 1000 µm selectable Speed: 1µm/s (Quality rating) adjustable according to velocity and measuring length 10 KHz (Overstampling is active while the scanning cycle is shorter than the measuring cycle  PROFILE STYLE (MODEL RP) SENSOR Electronic head: Aluminum housing Diagnostic display (LED \'s located beside connectors) Sealing: IP 65 Sensor extrusion: Aluminum Mounting: Adjustable mounting feet or T-slot nut (M5 threads) in base channel Magnet type: Captive-sliding magnet or open-ring magnet ROD STYLE (MODEL RH) SENSOR Electronic head: Aluminum housing Diagnostic display (LED \'s located beside connectors) Sealing: IP 67 Sensor rod with flange: 304L Stainless steel Operating pressure: 350 bar static, 690 bar spike (5000 psi static; 10,000 psi spike) Mounting: Any orientation. Threaded flange M18 x 1.5 or 3/4-16 UNF-3A Typical mounting torque: 45 N-m (33 ft. - lbs.) Magnet type: Ring magnet, open-ring magnet, or magnet float  Update time: Non-linearity: Repeatability:  <± 0.01% full scale (minimum ±50µm) < ± 0.001% full scale (minimum ± 2.5 µm) Hysteresis: < 4 µm Outputs: Interface: EtherCAT Data format: EtherCAT 100 Base-Tx, fast Ethernet Data transmission rate: 100 Mbit/s max. Stroke length: Profile style: 50 mm (2 in.) to 5080 mm (200 in.) Rod style: 50 mm (2 in.) to 7620 mm (300 in.) Operating voltage: +24 Vdc nominal: -15 or +20% Polarity protection: up to -30 Vdc Overvoltage protection: up to 36 Vdc Current drain: 80 mA typical Dielectric withstand voltage: 500 Vdc (DC ground to machine ground) Operating temperature: Temperature: - 40 °C (-40 °F) to 75 °C, (167 °F) Relative humidity: 90% no condensation Temperature coefficient: < 15 ppm / °C  MTS Sensors  35  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series EtherCAT®  HIGH-SPEED NETWORKED SENSORS WITH ENHANCED MONITORING AND DIAGNOSTICS EtherCAT interface Temposonics R-Series EtherCAT sensors represent MTS Sensors \' latest development in high-speed networked position feedback. EtherCAT (Ethernet for Control Automation Technology)* is a unique interface for industrial Ethernet that provides the fastest, most deterministic industrial networking solution possible using the base Ethernet physical layer. This format, coupled with our high speed networked sensing capability, enables machine builders and automation engineers to overcome bandwidth and node limitation issues of other commercially available industrial networks.  * Developed by Beckhoff Automation and supported by the EtherCAT Technology Group (ETG)  EtherCAT operation modes There are two versions available: · E101 Fast update position and velocity - Designed for high speed motion control - Up to 5 simultaneous magnet measurements - 100 µsec update rate, (independent of stroke length) · E102 Multi-magnet position and velocity - Designed for gauging systems having many magnet positions - Up to 20 simultaneous magnet measurements - Standard update rates, (stroke-length dependent)  R-Series EtherCAT®  Sensor status and diagnostic display Integrated LEDs (green/red) provide basic visual feedback for normal sensor operation and troubleshooting including missing or out of range magnet and network status and activity.  Green Red ( Power ) ( Error ) ON ON Flashing OFF ON OFF  Description Power applied Missing or incorrect number of magnets Ethernet communications Ethernet communication + magnet error (above)  1 - 5 Magnet Measurement  Active stroke length ( Measuring range ) Min. 75 mm  M1  M2  M3  M4  M5  Flashing  ON  Displacement / Velocity 1 - 20 Magnet Measurement  Min. 75 mm  LED \'s  M1 M2 M3 ................................ M19 M20  Displacement  Temposonics® Linear-Position Sensors Product Catalog 551075 C  36  MTS Sensors  SENSOR CONNECTIONS AND WIRING D56 connector option for  daisy chain  topologies A separate cable is used for the bus and for the supply voltage. Unused connectors should be covered by a protective cap.  OUT  BUS 24 Vdc IN  BUS In / Out  3 2 1 4 2 1 3 4  Pin 1 2 3 4  Cable yellow white orange blue  Function Tx+ Rx+ TxRx-  Input voltage  2 1 4 3  Pin 1 2 3 4  Cable brown white blue black  Supply Voltage  +24 Vdc (-15/+20)% do not connect 0 Vdc (GND) do not connect  Female Integral D56 connectors as viewed from end of sensor  Female  Male  Integral power connector as viewed from end of sensor  Male M12 connector  16 mm (0.63 in.) dia.  5 m industrial Ethernet cable (Cat 5e ES) w/RJ45 connector and M12 connector (D-coded) PUR jacket, green Part no. 530065  47 mm (1.81 in.)  M12x1  55 mm (2.17 in.)  4-pin M12 connector  RJ45 Cable  17 mm (0.67 in.) dia. M 12  M12 connector (male, D-coded) w/IDC technology Part no. 370523  53 mm (2.09 in) max.  1  4  2  3  Shielded PUR cable w/M8 connector (female) and pigtail for 24 Vdc input, Wire gauge: 4 x 0.25 mm2 shielded, 5m length Part no. 530066  M8 x 1  10 mm (0.39 in.) dia.  32.5 mm (1.28 in.)  MTS Sensors  37  Temposonics® Linear-Position Sensors Product Catalog 551075 C  16 mm (0.63 in.) dia.  5 m industrial Ethernet cable (Cat 5e ES) w/2 4 pin M12 connectors (D-coded) PUR jacket, green Part no. 530064  Cable  47 mm (1.85 in.)  R-Series EtherCAT®  MODEL RP PROFILE-STYLE SENSOR Captive-sliding magnet  Note: See page 58 for installed magnet dimensions. D56 connector  Beginning of stroke (Null position) 100 mm (3.9 in.) Electronics housing Stroke length 12 mm (0.47 in.) Captive-sliding magnet End of stroke 82 mm (3.2 in.) Dead zone  49 mm (1.9 in.)  19 mm (0.7 in.)  LED window  45 mm (1.77 in.)  Mounting foot 2 mm (0.08 in.)  35.6 mm (1.40 in.) 50 mm (1.96 in.) 68 mm (2.67 in.)  5.5 mm (0.21 in.) dia. for M5 or #10 screw  14.5 mm (0.57 in.)  Profile-style aluminum extrusion  Mounting foot  R-Series EtherCAT®  Open-ring magnet  66 mm 28 mm (1.1 in.) Null zone Stroke length Dead zone Non-ferrous mounting support and screws  D56 connector  28 mm (1.1 in.) 19 mm (0.75 in.) 100 mm (3.9 in.)  Open-ring magnet Style M End of stroke Beginning of stroke (Null position)  MODEL RH ROD-STYLE SENSOR  The rod-style sensor (model RH) offers modular construction, flexible mounting configurations, and easy installation. It is designed for internal mounting in applications where high pressure conditions exist, (5000 psi continuous, 10,000 psi spike), such as hydraulic cylinders. The model RH sensor may also be mounted externally in many applications. Note: See page 58 for installed magnet dimensions.  Electronics Housing 25 mm (0.98 in.) Beginning of stroke (Null position) Ring magnet End of stroke  Rod 10 mm (0.39 in.) dia.  19 mm (0.7 in.)  O-ring Flat-faced flange 105 mm (4.1 in.) 51 mm (2 in.) Null zone Stroke length Dead zone Stroke dependent (refer to chart below)  49 mm (1.9 in.)  105 mm (4.1 in.)  Null 51 mm (2 in.) 25 mm (1 in.)  Stroke-dependent Dead Zones Stroke length Dead Zone 50 mm (2 in.) - 5000 mm (197 in.) 63.5 mm (2.5 in.) 5005 mm (197.1 in.) - 7620 mm (300 in.) 66 mm (2.6 in.)  44 mm (1.7 in.)  Electronics housing  D56 Connector  Housing style Flange type T S M  19 mm (0.7 in.)  Raised-face flange 2.5 mm (0.1 in.) A Flange threads 3/4  - 16 UNF-3A 3/4  - 16 UNF-3A M18 x 1.5  25 mm (0.98 in.)  Beginning of stroke (Null position) O-Ring  Description US customary threads with raised-face flange US customary threads with flat-faced flange Metric threads with flat-faced flange  B Dimensions 44.5 mm (1.75 in.) 44.5 mm (1.75 in.) 46 mm (1.81 in.)  C Dimensions 51 mm (2 in.) 51 mm (2 in.) 53 mm (2.1 in.)  MTS Sensors  Temposonics® Linear-Position Sensors Product Catalog 551075 C  38  HOW TO ORDER  R  1 2 3 4 5 6 7 8 9 10 11  1  12  E  13 14 15 16 17 18 19  SENSOR MODEL RP = Profile style RH = Hydraulic rod-style HOUSING STYLE  S= V= M= Model RP profile-style sensor only (magnet included): Captive-sliding magnet with joint at top (part no. 252182) Captive-sliding magnet with joint at front (part no. 252184) Open-ring magnet (part no. 251416-2) Model RH rod-style sensor only (magnet must be ordered separately): US customary threads, raised-faced flange and pressure tube, standard US customary threads, flat-faced flange and pressure tube, standard Same as option  T , except uses fluoroelastomer seals for electronics housing Same as option  S , except uses fluoroelastomer seals for electronics housing Metric threads, flat-faced flange and pressure tube, standard Same as option  M , except uses fluoroelastomer seals for electronics housing Sensor cartridge only, no flange and pressure tube. Stroke length < 1830 mm (72 in.) Model RF flex sensor only, (reference page 41 for flex housing style): magnet must be ordered separately: US customary threads, flat-faced flange Metric threads, flat-faced flange Stroke length notes: 1. RH stroke length = 50 mm (2 in.) - 7620 mm (300 in.) 2. RP stroke length = 50 mm (2 in.) - 5080 mm (200 in.)  S= U= H= M= V= B=  S= M=  STROKE LENGTH _ _ _ _ M = Millimeters (Encode in 5 mm increments) _ _ _ . _ U = Inches and tenths (Encode in 0.1 in. increments) CONNECTION TYPE D56 = 2 x 4 pin, female (M12-D), plus 4-pin male (M8). 1= INPUT VOLTAGE  +24 Vdc (+20%, -15%)  OUTPUT E101 = EtherCAT, position and velocity, maximum 5 magnets E102 = EtherCAT, position and velocity, maximum 20 magnets NUMBER OF MAGNETS (For multi-position measurement only) Z _ _ = Number of magnets for output E101 (range 02 to 05), or for output E102 (range 02 to 20).  Order additional magnets separately for multi-position measurement  MTS Sensors  39  Temposonics® Linear-Position Sensors Product Catalog 551075 C  R-Series EtherCAT®  T=  R-Series EtherCAT®  Temposonics® Linear-Position Sensors Product Catalog 551075 C  40  MTS Sensors  ",316);arrFiles[106]=new Array(107,"HTML/MTS-EL-EP-Brochure.pdf","18 May 2011","Product Data Sheet, 551248 Rev A","","E-Series Models EP and EL Analog and Digital-Pulse (Start/Stop) Output Sensors","Temposonics  ®  ®  Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Models EP and EL Analog/Digital-Pulse (Start/Stop) Outputs  Data Sheet  SENSORS  Document Part Number: 551248 Revision A  Model EP position sensor - Full Size Profile Housing Stroke Length: 50 mm to 3000 mm (2 in. to 120 in.)  FEAtuRES  Linear, Absolute Measurement  Non-Contact Sensing technology  Linearity Deviation Less than 0.02% F.S.  Repeatability Within 0.001% F.S.  two Outputs Available: · Analog(Voltage/Current)ForwardorReverseActing · Digital-PulseOutput(Start/Stop)  SimpleSensorParameterUpload(forStart/Stop)  Stroke Length Ranges: · 50mmto2500mm(2in.to100in.) · 50mmto3000mm(2in.to120in.) For Model EP Start/Stop  EMI Shielded and CE Certified BENEFItS  Rugged, Cost Effective, Precise and Durable Non-wear Alternative to Potentiometers  Simultaneous Multi-position Measurements  OverVoltageProtectionto36VdcandPolarityProtection  upto-30Vdc APPLICAtIONS  Continuous Operation In Harsh Industrial Conditions tyPICAL INDuStRIES  Factory Automation  Woodworking and Metal Forming  Material Handling and Packaging  Model EL position sensor - Low Height Profile Housing Stroke Length: 50 mm to 2500 mm (2 in. to 100 in.)  time-based Magnetostrictive position sensing principle  Movable position magnet  Magnetic field encompasses entire waveguide - generated by the interrogation pulse Interrogation Return wire Waveguide Strain-Pulse detector Bias magnet Magnetic field from position magnet Interaction of magnetic fields causes waveguide to generate a strain pulse  Benefits of Magnetostriction Temposonics linear-position sensors use the time-based magnetostrictive position sensing principle developed by MTS. Within the sensing element, a sonic-strain pulse is induced in a specially designed magnetostrictive waveguide by the momentary interaction of two magnetic fields. One field comes from a movable permanent magnet that passes along the outside of the sensor. The other field comes from an  interrogation  current pulse applied along the waveguide. The resulting strain pulse travels at sonic speed along the waveguide and is detected at the head of the sensing element. The position of the magnet is determined with high precision and speed by accurately measuring the elapsed time between the application of the interrogation pulse and the arrival of the resulting strain pulse with a high-speed counter. The elapsed time measurement is directly proportional to the position of the permanent magnet and is an absolute value. Therefore, the sensor \'s output signal corresponds to absolute position, instead of incremental, and never requires recalibration or re-homing after a power loss. Absolute, non-contact sensing eliminates wear, and guarantees the best durability and output repeatability.  All specifications are subject to change. Contact MTS for specifications and engineering drawings that are critical to your application. Drawings contained in this document are for reference only. Go to http://www.mtssensors.com for the latest product documentation and related media.  E-Series Models EP and EL Sensors ProductOverview/Specifications  MTS Sensors continues to establish new performance standards for low-cost, fully-industrial, durable position sensors using the widely preferred magnetostrictive technology. This principle for accurate and non-contact measurement of linear-position sensing was developed 30 years ago by MTS and is used with outstanding success in a large variety of industrial applications. The Temposonics models EP and EL sensors consists of robust aluminum profile-style housings that offer flexible mounting configurations and easy installation. Sensor models EP and EL are ideal for demanding industrial applications where simple, reliable non-contact feedback is essential.  Product specifications  Parameters OutPut Measured output variables: Resolution: Position Analog: Infinite (restricted by output ripple) Start/Stop: 0.1, 0.01 and 0.005 mm (controller dependent) < ± 0.02% full stroke (minimum ± 60 µm) < ± 0.001% full stroke (minimum ± 5 µm) Analog (voltage or current) Voltage: 0 to 10 Vdc or 10 to 0 Vdc or two outputs: 0 to 10 Vdc and/or 10 to 0 Vdc (controller input resistance RL  5k Ohm) Current: 4 to 20 mA or 20 to 4 mA (Controller input resistance RL  500 Ohm) Digital-pulse(Start/Stop): RS-422 differential signal Serial parameter upload available for: Measuring range, offset, gradient, status and manufacturer number Stroke length: Range: 50 mm to 2500 mm (2 in. to 100 in.) or 50 mm to 3000 mm (2 in. to 120 in.) For Model EP Start/Stop output ENVIRONMENTAL Operating conditions: Operating temperature: -40 °C (-40 °F) to 75 °C (167 °F) Relative humidity: 90% no condensation Ingress protection: IP 67 (when mating connector is correctly fitted) Electromagnetic emission: EN 61000-6-4, CISPR 16 Electromagnetic susceptibility: EN 61000-6-2, EN 61000-4-2/3/4/6, CE qualified 100 g (single hit)/ IEC standard EN 60068-2-27 15 g/10 to 2000 Hz, IEC standard EN 60068-2-6 (resonance frequencies causing excess of 15 g are excluded) Analog output: 5-pin (M12) male integral connector Start/Stopoutput: 8-pin (M12) male integral connector Aluminum housing Aluminum (Temposonics profile style) Adjustable mounting clamps Captive-sliding magnets, open-ring magnet or block magnet Specifications Parameters ELECtRONICS Operating voltage: +24Vdcnominal: -15% or +20% Polarity protection: up to -30 Vdc Over voltage protection: up to 36 Vdc Current drain: Analog: 50 - 140 mA Start/Stop: 50 - 100 mA (Stroke length dependent) Dielectric withstand voltage: 500 Vdc (DC ground to machine ground) Specifications  Linearity deviation: Repeatability: Outputs:  EMC test:  Shock rating: Vibrationrating:  WIRINg Connection types:  PROFILE-StyLE SENSOR Electronic head: Sensor extrusion: Mounting: Magnet types:  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Models EP/EL, Document Part No.: 551248, Revision A 02-11  2  MTS Sensors  E-Series Models EP and EL Sensors Communication and Programmability  Outputs  ANALOg(VOLTAgE/CURRENT)OUTPUTS  Analog outputs include voltage (0 to 10 Vdc forward or reverse acting), and current (4 to 20 mA forward or reverse acting). Since the outputs are direct, no signal conditioning electronics are needed when interfacing with controllers or meters (see  \'Figure 1 \'). Analog output voltages ranges: · 0 to 10 Vdc · 10 to 0 Vdc · 0 to 10 Vdc and 10 to 0 Vdc · 4 to 20 mA · 20 to 4 mA  Output value  For  Active stroke length (Measuring Range)  ctin g  da war  Rev  ers  e ac  ting  Position magnet  DIgITALSTART/STOPOUTPUT  Figure 1. Analog Output signals  Start/Stop  + Start - Start  Temposonics E-Series Models EP and EL Start/Stop output sensors require a start signal from a controller or interface module to initiate the measurement cycle. The sensor generates a stop signal at the end of the Start signal from controller or measurement cycle that is used to stop the control- interface module ler \'s counter clock.  Start Pulse  Input signals to sensor  Start pulse `reflection´ + Stop The elapsed time between the Start and Stop signals - Stop is directly proportional to the magnet \'s position along the active stroke length. The controller can calculate the absolute position of the magnet from the time Time between `Start \' and `Stop \' pulses is proportional to magnet position value and the sensor \'s unique gradient value (inverse of the speed for the sonic pulse traveling in the senFigure 2. Start/Stop output signals (RS-422 differential pairs) sor \'s waveguide). (see  \'Figure 2 \').  Stop pulse  Output signals from sensor  Dual magnet outputs  E-Series sensors provide options for simultaneous multi-position measurements by using more than one magnet per sensor. When using Start/Stop sensor output the ability to process multiple magnets depends on the capability of the controller or interface module that is used. When using analog type outputs (voltage or current) the sensor is limited to a maximum of two magnets. For analog output types the options for single-magnet or dualmagnets is specified in the sensor model number when ordered. For single-magnet sensors the sensor \'s full active stroke length is utilized by the one magnet. For example when using forward-acting outputs, the output is 0% of its value when the magnet is at the null position (start of stroke) and 100% of its value when at the edge of the dead zone (end of stroke), (see `Figure 3 \'). However, for dual-magnet sensors the sensor \'s active stroke length must be shared by the two magnets, and a separation > or = to 75 mm (3 in.) must be maintained between the two magnets (front side of the first magnet to front side of the second magnet). This minimum distance between magnets is needed to maintain proper sensor output. Therefore, for the second magnet the start of stroke (0% output) is set at 75 mm away from the sensor \'s null position. Likewise, for the first magnet the end of stroke (100% output) is now set 75 mm away from the edge of the dead zone (see `Figure 3 \'). The result of using the dual-magnet E-Series options is that the stroke length available for each magnet is 75 mm less (or 3 inches less when specifying stroke length in inches) than the sensor \'s full active stroke length as indicated in the model number.  MTS Sensors  MEASuREMENt OPtIONS  When ordering the single-magnet E-Series sensor the minimum stroke length available is 50 mm or 2 inches. However when ordering dual magnet E-Series sensors the minimum stroke length available is 125 mm (i.e. 50 mm minimum, plus 75 mm for the minimum distance between magnets). Likewise, when specifying stroke length in inches the minimum stroke length available is 5 inches (i.e. 2 inch minimum, plus 3 inches for the minimum distance between magnets).  Single-magnet sensor  Null position start of stroke M1 Active stroke length End of stroke dead zone M1A  0 Vdc (0%)  10 Vdc (100%)  75 mm or (3 in.) M2  Dual-magnet sensor  M1  M1A  M2A  0 Vdc (0%) 0 Vdc (0%)  1st Magnet 2nd Magnet  10 Vdc (100%) 10 Vdc (100%)  Figure 3. Single and dual magnet measurements 3  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Models EP/EL, Document Part No.: 551248, Revision A 02-11  E-Series Models EP and EL Sensors Sensor Communications and Dimension References  Communication and programmability  SENSOR PARAMEtER uPLOAD FEAtuRE  For applications using smart sensor interfaces, the Models EP and EL sensors with Start/Stop output (Option R3) comes with the ability to perform sensor parameter uploads. This feature replaces the task of entering sensor data manually, saving time and preventing possible entry errors during start-up or for system maintenance. Note:Start/Stopoutput(optionR3) When the sensor parameter upload feature is not activated the Start/Stop output (Option R3) remains fully compatible with the Start/Stop output (Option R0) used in the previous generation E-Series sensors. the upload feature supports the following sensor parameters: · Measuring range · Offset · Gradient - (Shown as speed of the sonic-strain pulse (m/s) or inverse speed (s/in.) · Status · Manufacturer number The sensor \'s specific parameters can be retrieved by the controller/ interface module at any time, via the sensor \'s Start/Stop signal lines. The sensor parameter upload feature requires a customer supplied RS-422 interface. The data format is serial, 4800 Baud, 8-bit data length. Please contact the factory for additional parameter upload protocol details.  Sensor dimension references  Drawings are for reference only, contact applications engineering for tolerance specific information. A robust aluminum extrusion forms the sensor housing containing the sensing element and electronics. The position magnet moves along the top of the profile extrusion housing.  MODEL EP  49 mm 49(1.9 in.) mm (1.9 in.) M12 connector 5-pin (M12) or M12 connector 8-pin (M12) 5-pin (M12) or 8-pin (M12) 29 mm 29(1.1 in.) mm  (1.1 in.)  Beginning of stroke - Null position 19 mm stroke - Null position (0.75 in.) Beginning ofBall-jointed arm (M5 thread, vertical 18° / horizontal 360°) 19 mm Captive-sliding magnet, vertical 18° / horizontal Ball-jointed arm (M5 thread,Style S part no.: 252182360°) (0.75 in.) Captive-sliding magnet, Style S part no.: 252182  13 mm (0.5 in.)  13 mm (0.5 in.)  Figure 4. E-Series model EP sensor dimension reference (Shown with Style S captive-sliding magnet)  14.6 mm (0.57 in.) 14.6 Mounting clamp mm (0.57 in.) Dead zone Mounting clamp Stroke length 84 mm Dead zone (3.3 (See `Ordering Information \' for stroke length details) 84 mm in.) Stroke length (3.3 in.) (See `Ordering Information \' for stroke length details)  Mounting clamp 50 mm (1.97 in.) Mounting 68 (1.97 in.) clamp 50 mm mm (2.68 in.) 68 mm (2.68 in.)  MODEL EL  45 mm 45 (1.9 in.) mm (1.9 in.)  Beginning of stroke - Null position 19 mm stroke - Null position (0.75 in.) Beginning ofBall-jointed arm (M5 thread, 18° rotation) 19 mm Captive-sliding magnet, 18° V part no.: Ball-jointed arm (M5 thread,Stylerotation) 252184 (0.75 in.) Captive-sliding magnet, Style V part no.: 252184 15 mm (0.6 15 mm in.) (0.6 in.)  M12 connector 5-pin (M12) M12 connector or 8-pin (M12) 5-pin (M12) or 12.5 8-pin (M12) mm (0.49 12.5 mmin.) (0.49 in.)  40 mm (1.6 in.) 40 mm (1.6 in.)  13 mm (0.5 in.) 13 mm (0.5 in.)  27 mm (1.06 27 mm in.) (1.06 in.)  14.6 mm (0.57 in.) 14.6 Mounting clamp mm (0.57 in.) Dead zone Mounting clamp Dead zone 84 mm Stroke length Stroke length (3.3 (See `Ordering Information \' for stroke length details) 84 mm in.) (3.3 in.) (See `Ordering Information \' for stroke length details)  Mounting clamp 50 mm (1.97 in.) Mounting clamp 50 mm (1.97 in.) in.) 68 mm (2.68 68 mm (2.68 in.)  Figure 5. E-Series model EL sensor dimension reference (Shown with Style V captive-sliding magnet)  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Models EP/EL, Document Part No.: 551248, Revision A 02-11  4  MTS Sensors  E-Series Models EP and EL Sensors Sensor Dimension References  Sensor dimension references  Drawings are for reference only, contact applications engineering for tolerance specific information.  MODEL EP  49 mm (1.9 in.)  49 mm (1.9 in.)  35 mm (1.4 in.)  35 mm (1.4 in.)  Beginning of stroke - Null position Open-ring magnet, Style M part no.: 251416-2 Beginning of stroke - Null position Mounting support, screw Open-ring magnet, Style M (non-ferrous material) part no.: 251416-2 Mounting support, screw (non-ferrous material)  End of stroke  End of stroke  29 mm (1.1 in.)  13 mm (0.5 in.)  Dead zone 14.6 mm (0.57 in.) length Stroke 68 mm Mounting clamp (2.7 in.) (See `Ordering Information \' for stroke length details) Dead zone Stroke length Figure6. E-Series model EP sensor dimension reference (Shown with Style M open-ring68 mm magnet) (2.7 in.) (See `Ordering Information \' for stroke length details) Beginning of stroke - Null position End of stroke MODEL EP 32.5 mm 49 mm (1.3 in.) (1.9 in.) Mounting support, screw Beginning of stroke - Null position End of stroke 32.5 mm 49 mm Block magnet, Style L 11 in.) (1.3 mm (1.9 in.) Mounting support, screw (0.43 in.) part no.: 252887 M12 connector Block magnet, Style L 11 mm 5-pin (M12) or (0.43 in.) part no.: 252887 8-pin (M12) M12 connector 5-pin (M12) or 29 mm 8-pin (M12) 13 mm (0.5 in.) (1.1 in.) 29 mm 13 mm (0.5 in.) (1.1 in.) 14.6 mm (0.57 in.) Mounting clamp Dead zone 14.6 mm (0.57 in.) Stroke 72.5 mm Mounting clamp length (2.8 (See `Ordering Information \' for stroke length details)Dead zone in.) Stroke length 72.5 mm (2.8 in.) (See `Ordering Information \' for stroke length details)  14.6 mm (0.57 in.) Mounting clamp  40 mm (1.6 in.)  Mounting clamp  Mounting clamp  50 mm (1.97 in.) 68 mm (2.68 in.)  50 mm (1.97 in.) 68 mm (2.68 in.)  31 mm (1.22 in.) 19.5 mm 31 mm in.) (0.77 (1.22 in.) 19.5 mm (0.77 in.) Gap 3 mm ± 2 mm  40 mm (1.6 in.) 40 mm (1.6 in.)  (0.12 in. ± 0.08 in.)  (0.12 in. ± 0.08 in.)  Gap 3 mm ± 2 mm  Mounting clamp  Mounting clamp  50 mm (1.97 in.) 68 mm (2.68 in.) 50 mm (1.97 in.) 68 mm (2.68 in.)  Figure 7. E-Series model EP sensor dimension reference (Shown with Style L block magnet)  MTS Sensors  5  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Models EP/EL, Document Part No.: 551248, Revision A 02-11  41 mm (1.6 in.)  M12 connector 5-pin (M12) or 8-pin (M12) M12 connector 29 mm 5-pin (M12) or (1.1 8-pin (M12) in.)  13 mm (0.5 in.)  40 mm (1.6 in.)  41 mm (1.6 in.)  20.7 mm (0.81 in.) Gap 3 mm ± 1 20.7 mm (0.12 in. ± 0.04 mm) (0.81 in.) Gap 3 mm ± 1 (0.12 in. ± 0.04 mm)  E-Series Models EP and EL Sensors Standard Magnet and Accessory Selections  Standard magnet selections (Models EP and EL)  Selection of position magnets A choice of four standard magnet mounting configurations are available for E-Series models EP and EL sensors; A `captive-sliding \' magnet (Styles S or V), or an `open-ring \' magnet (Style M), or the `block  \'magnet (Style L). Captive-sliding magnets utilize slide bearings of special material that reduce friction, and if required, help mitigate dirt build up. The slide bearings are designed to operate dry, requiring no external lubrication or maintenance. The Style M `open-ring \' magnet mounts on the moving machine part and travels just above the sensor \'s profile extrusion. The open-ring magnet requires a minimum distance away from ferrous metals to allow proper sensor output. It must be mounted using non-ferrous screws and a non-ferrous support bracket, or utilize a non-ferrous spacer of at least 5 mm (0.2 in.) thickness. The Style L `block \' magnet (part no.: 252887), mounts on the moving machine part and travels just above the sensor \'s extrusion. The magnet can be mounted using ferrous metal screws on a customer supplied mounting plate or flat surface of the machine \'s moving part. The mounting plate or machine \'s moving part can not extend beyond 11 mm (0.43 in.) from the top of the magnet, unless it is made of non-ferrous material. The magnet should be installed in a perpendicular orientation relative to the top surface of the sensor extrusion. Optimal performance is achieved when this orientation remains consistent throughout the full measurement stroke range. POSItION MAgNEt SELECtIONS (All magnets must be ordered separately) (Drawing dimensions are for reference only) Magnet/accessorydimensions  14 mm (0.55 in.) Rotation: Vertical: 18° Horizontal: 360° Ball-jointed arm (M5 thread) 40 mm (1.58 in.)  57 mm (2.24 in.) 24 mm (0.95 in.) 40 mm (1.58 in.)  4.5 mm (0.18 in.) 6 mm (0.24 in.) 20 mm (0.79 in.)  Description  43 mm (1.69 in.) 20 mm (0.79 in.) 24 mm (0.95 in.)  Part number  Captive-sliding magnet, Style S For Sensor models EP and EL profile-style sensors GFK, magnet hard ferrite Weight: Approx. 30 g  Operating temperature: Material:  252182  -40 °C to +75 °C  14 mm (0.55 in.) Rotation: Vertical: 18° Ball-jointed arm (M5 thread) 9 mm (0.35 in.)  Captive-slidingmagnet,StyleV For sensor models EP and EL profile-style sensors GFK, magnet hard ferrite Weight: Approx. 30 g  Operating temperature: Material:  252184  -40 °C to +75 °C  11 mm (0.43 in.) 2 mm (0.08 in.) radius  19.5 mm (0.77 in.)  Block magnet, Style L For sensor models EP and EL profile-style sensors  252887  31 mm (1.22 in.)  13.5 mm (0.53 in.)  2 Holes, Each 4.3 mm (0.17 in.) dia. on 24 mm (0.94 in.) dia. 25 mm (0.97 in.)  60°  14 mm (0.55 in.) 21 mm (0.81 in.)  Open-ring magnet, Style M I.D.: 13.5 mm (0.53 in.) O.D.: 33 mm (1.3 in.) thickness: 8 mm (0.31 in.)  Operating temperature:  251416-2  -40 °C to 100 °C  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Models EP/EL, Document Part No.: 551248, Revision A 02-11  6  MTS Sensors  E-Series Models EP and EL Sensors Sensor Mounting, Connections and Wiring  Sensor mounting (Models EP and EL)  SENSOR MOuNtINg CLAMPS E-Series models EP and EL sensors are mounted onto the machine with moveable mounting clamps. Mounting clamps slide into side grooves and should be evenly distributed along the sensor extrusion to best secure the sensor for each particular application. Notes:  1. Models EP and EL sensors include two mounting clamps, (part number 403508), for stroke lengths up to 1250 mm (50 in.). One additional mounting clamp is included for longer stroke lengths. 2. MTS recommends using 10-32 cap screws part no.: 403508 (customer supplied) at a maximum torque of 44 in. lbs. when fastening mounting clamps.  Mounting clamp  Models EP and EL sensor mounting and installation reference  4 Holes 5.4 mm (0.21 in.) dia. 2 mm (0.08 in.)  Mounting method  9 mm (0.36 in.) 10 mm (0.4 in.)  Part number  31 mm (1.2 in.)  50 mm (1.97 in.)  68 mm (2.68 in.)  Mounting clamp Sensor mounting for sensor models EP and EL  403508  Mounting clamp width: 14.6 mm (0.57 in.)  Model EP mounting  Mounting clamp part no.: 403508  Model EL mounting  Mounting clamp part no.: 403508  Mounting configuration using mounting clamp and screws  Mounting clamp, part number 403508  Connections and wiring (Model EP and EL)  SENSORINTEgRALCONNECTOR(D34ANDD84)PINOUT/wIRECOLORCODES  The E-Series models EP and EL sensors connect directly to a controller or interface module with the standard male, 5-pin or 8-pin integral connector and an extension cable as described in `Table 1 \' and `Table 2 \'. Attention:  The sensors aluminum housing has an anodic coating which prevents the sensor \'s mounting clamps from providing the appropriate grounding. A grounding lug (see `Figure 7 \') is provided near the connector end of the sensor for a convenient connection to earth ground. The appropriate grounding of the cable shield is also required Mounting clamp part controller at theno.: 403508 end.  2 1 3 8 7 4 6 5  Grounding Lug  Figure 7. Grounding lug location.  2 3 5  1 4  Integral D34 connector (male) as viewed from the end of the sensor Extension cable wire color Brown White Blue Black Green Signal/function analog outputs +24 Vdc Output signal DC ground (for power return) 2nd Output signal (optional) Ground for signal return  Integral D84 connector (male) as viewed from the end of the sensor Extension cable wire color White Brown Green Yellow Gray Pink Blue Red Signal/function Start/Stopoutputs (+) Start (-) Start (+) Stop (-) Stop No connection No connection +24 Vdc DC ground (for power return)  Pin no. 1 2 3 4 5  Pin no. 1 2 3 4 5 6 7 8  table 1. Integral D34 sensor connector (mates with cable connectors 370618 and 370619)  table 2. Integral D84 sensor connector (mates with cable connectors 370671 and 370672)  MTS Sensors  7  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Models EP/EL, Document Part No.: 551248, Revision A 02-11  E-Series Model EP and EL Sensors Cable Connector Options (D34 and D84)  MAtINg CABLE CONNECtOR OPtIONS FOR (D34) CONNECtOR tyPES (Photo and drawing dimensions are for reference only) Connector and dimensions Description Female cable connector, straight exit (Field installable) 5-Pin (D34) Mates with standard male (M12) integral connector termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67 Female cable connector, 90° exit (Field installable) 5-Pin (D34) Mates with standard male (M12) integral connector termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67 Description Female cable connector, straight exit (Field installable) 8-Pin (D84) Mates with standard male (M12) integral connector termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67 Female cable connector, 90° exit (Field installable) 8-Pin (D84) Mates with standard male (M12) integral connector termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67 Part number  52 mm (2.0 in.) 20 mm (0.8 in.) dia.  370618  35 mm (1.4 in.) 20 mm (0.8 in.) dia. 40 mm (1.6 in.)  370619  MAtINg CABLE CONNECtOR OPtIONS FOR (D84) CONNECtOR tyPES (Photo and drawing dimensions are for reference only) Connector and dimensions Part number  52 mm (2.0 in.) 20 mm (0.8 in.) dia.  370671  35 mm (1.4 in.) 20 mm (0.8 in.) dia. 40 mm (1.6 in.)  370672  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Models EP/EL, Document Part No.: 551248, Revision A 02-11  8  MTS Sensors  E-Series Model EP and EL Sensors (M12)CordSetsand(M16)AdapterCableOptions  M12CORDSETSAND(M16)ADAPTERCAbLEOPTIONS (Connector and drawing dimensions are for reference only) Cord set and dimensions Description Part number  M12 Cord set, female connector, Straight exit 5-Pin (M12) mates with standard male (D34) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370673  15 mm (0.59 in.) dia. M12 x 1  26.5 mm (1.04 in.)  (Image not available)  8.8 mm (0.35 in.) dia. 11.6 mm (0.46 in.) dia. 12 mm (0.47 in.)  31.5 mm (1.24 in.)  M12 Cord set, female connector 90° exit 5-Pin (M12) mates with standard male (D34) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370675  M12 Cord set, female connector, straight exit 8-Pin (M12) mates with standard male (D84) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370674  15 mm (0.59 in.) dia. M12 x 1  26.5 mm (1.04 in.)  (Image not available)  8.8 mm (0.35 in.) dia. 11.6 mm (0.46 in.) dia. 12 mm (0.47 in.)  31.5 mm (1.24 in.)  M12 Cord set, Female, Connector 90° Exit 8-Pin (M12) mates with standard male (D84) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370676  Adapter cable and dimensions  Description Adapter cable 5-Pin female (M12) connector, straight exit to 6-pin male D60 (M16) connector, straight exit Ingress protection: IP67 Adapter cable 8-Pin female (M12) connector, straight exit to 6-pin male D60 (M16) connector, straight exit Ingress protection: IP67  Part number  (Image not available)  254206  (Image not available)  254207  MTS Sensors  9  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Models EP/EL, Document Part No.: 551248, Revision A 02-11  E-SeriesModelEPandELSensors,Analog/Digital-pulse(Start/Stop)Outputs Sensor Ordering Information  Use the order matrix below to configure your Model EP or EL sensor order number.  E  1 2  0  3 4 5 6 7 8  D  9 10 11  1  12 13 14 15  SENSOR MODEL EP EL 0  =  E 0  1-2  = E-Series model EP profile-style sensor (Magnet(s) must be ordered separately) = E-Series model EL low-height profile-style sensor (Magnet(s) must be ordered separately)  HOuSINg StyLE =  3  = (Zero) EP and EL sensors do not have housing options or magnet types included in the standard model number. Magnets must be purchased separately by part number. Refer to `Standard magnet selections (Models EP and EL) \' in this document for  part numbers. StROKE LENgtH =  4-8  -------- ------.0  M = Millimeters (Encode in 25, 50, or 100 mm increments as indicated in `Stroke length notes \' below). u=  Inches (Encode in 1, 2, or 4 in. increments as indicated in `Stroke length notes \' below). (Digit for tenths of inches is always `0 \'). Stroke Length Notes: Stroke length ranges: M = 50 mm to 2500 mm (up to 3000 mm for model EP Start/Stop only) u = 2 in. to 100 in. (up to 120 in. for model EP Start/Stop only) the increment size between standard stroke lengths vary as shown below:  Stroke length (mm) Ordering increment   500 mm > 500 mm and  2500 mm > 2500 mm and  3000 mm (For model EP Start/Stop only)  Stroke length (IN)  25 mm 50 mm 100 mm  Ordering increment   20 in. > 20 in. and  100 in. > 100 in. and  120 in. (For Model EP Start/Stop only) SENSOR CONNECtION tyPES D34 D84 1 = 5-Pin (M12), male, (Analog output) = 8-Pin (M12), male, (Start/Stop output) INPUTVOLTAgE = + 24 Vdc (+20%, -15%), standard OutPut (2 or 3 digit code defined by output option selected).  VOLTAgE  1 in. 2 in. 4. in. =  D  9 - 11  = =  1  12 13 - 15  V01 V11 V02 V12 V03 A01 A11 A02 A12 R3  = 0 to 10 Vdc (1 output channel with 1 magnet) = 10 to 0 Vdc (1 output channel with 1 magnet) = 0 to 10 Vdc (2 output channels with 2 magnets) Refer to  \'Dual magnet outputs \' for more information. = 10 to 0 Vdc (2 output channels with 2 magnets) Refer to  \'Dual magnet outputs \' for more information. = 0 to 10 Vdc and 10 to 0 Vdc (2 output channels with 1 magnet)  CuRRENt  = 4 to 20 mA (1 output channel with 1 magnet) = 20 to 4 mA (1 output channel with 1 magnet) = 4 to 20 mA (2 output channels with 2 magnets) Refer to `Dual magnet outputs \' for more information. = 20 to 4 mA (2 output channels with 2 magnets) Refer to `Dual magnet outputs \' for more information.  START/STOP  = Start/Stop with sensor parameters upload function Start/Stop output (Option R3) is fully compatible with the Start/Stop output (Option R0) used in the previous generation E-Series sensors.  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Models EP/EL, Document Part No.: 551248, Revision A 02-11  10  MTS Sensors  MTS Sensors  11  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Models EP/EL, Document Part No.: 551248, Revision A 02-11  Document Part Number: 551248, Revision A 02-11 MTS and Temposonics are registered trademarks of MTS Systems Corporation. All other trademarks are the property of their respective owners. Printed in USA. Copyright © 2011 MTS Systems Corporation. All Rights Reserved in all media.  MtS Systems Corporation Sensors Division  ®  MtS Sensor technologie gmbH & Co. Kg Auf dem Schüffel 9 D - 58513 Lüdenscheid, Germany Tel.: +49-2351-9587-0 Fax: +49-2351-56491 e-mail: info@mtssensor.de http://www.mtssensor.de  MtS Sensors technology Corporation 737 Aihara-cho, Machida-shi Tokyo 194-0211, Japan Tel.: +81-42-775-3838 Fax: +81-42-775-5516 e-mail: info@mtssensor.co.jp http://www.mtssensor.co.jp  SENSORS  3001 Sheldon Drive Cary, North Carolina 27513, USA Tel.: +1-800-633-7609 Fax: +1-919-677-2343 +1-800-498-4442 e-mail: sensorsinfo@mts.com http://www.mtssensors.com  ",2849);arrFiles[107]=new Array(108,"HTML/MTS-GSeries-Analog.pdf","17 Jul 2009","MTS-GSeries-Analog","","","G-SERIES MODELS GP/GH - ANALOG  G-Series Models GP and GH Sensors Analog and Digital-Pulse Outputs  G-Series Model GP  G-Series Model GH  I Advanced sensor communication via serial RS-422, RS-485 or Infrared I Enhanced diagnostics and programming capability using serial I Designed for backwards compatibility with legacy Temposonics products  communications and visual LEDs interfaces  Parameters Stroke length:  Specifications  MTS Sensors, the inventors of magnetostrictive position sensing and makers of Temposonics sensors, is proud to introduce our new G-Series linear position sensors utilizing our next generation technology platform. G-Series position sensors feature a microprocessor-based design with enhanced diagnostics and programmability to maximize backwards compatibility. Backwards compatibility is one of the primary benefits of the new G-Series position sensor. G-Series position sensors provide the same functionality as Tempo II and L-Series sensors making them an ideal direct replacement for these products. In addition to providing advanced programming and diagnostic capabilities in a rugged package, G-Series position sensors also include the following features:  G  Rod-style sensor: Analog: 50 mm (2 in.) to 2540 mm (100 in.)* Digital: 50 mm (2 in.) to 7620 mm (300 in.) Profile-style sensor: Analog: 50 mm (2 in.) to 2540 mm (100 in.)* Digital: 50 mm (2 in.) to 5080 mm (200 in.) Operating voltage: +24 Vdc nominal: 20.4 - 28.8 Vdc standard +9 to +28.8 Vdc optional Operating temperature: -40 °C (-40 °F) to 80 °C (176 °F), 85 °C (185 °F **) max. EMC test: Emissions IEC/EN 61000-6-3, Immunity IEC/EN 61000-6-2, IEC/EN 61000-4-2/3/4/5/6/8, level 3/4 criterium A, CE qualified Shock rating: 100 g (single hit)/IEC standard 68-2-27 (survivability) Vibration rating: 15 g, (30 g with HVR option) / 10-2000 Hz / IEC standard 68-2-6 Adjustability: Field adjustable Null and Span (for analog sensors only) Update time: Analog: < 1 ms (typical) Digital (external interrogate): Minimum = (2.5 + null + stroke) x 10.0 µs/in. x (number of recirculations) PROFILE STYLE (MODEL GP) SENSOR Aluminum housing Electronic head: Diagnostic display (LED \'s located beside connector/cable exit) Sealing: IP 65 Sensor extrusion: Aluminum Mounting: Adjustable mounting feet or T-slot M5 nut in base channel Magnet type: Captive-sliding magnet or open-ring magnet ROD STYLE (MODEL GH) SENSOR Aluminum housing Electronic head: Diagnostic display (LED \'s located beside connector/cable exit) Sealing: IP 67 Sensor rod: 304L Stainless steel Operating pressure: 350 bar static, 690 bar spike (5000 psi static, 10,000 psi spike) Mounting: Threaded flange M18 x 1.5 or 3/4-16 UNF-3A Typical mounting torque: 45 N-m (33 ft. - lbs.) Magnet type: Ring magnet, open-ring magnet or magnet float * Stroke lengths longer than 2540 mm (100 in.) for analog output are available on a custom  basis. ** Consult factory for high temperature applications. The above specifications for analog output sensors are based on the assumption that output ripple is averaged by the measuring device as with any typical analog device.  Electronics housing small enough to allow for drop in replacements of legacy Temposonics products. G Standard 24 Vdc and extended input power supply options for compatibility with older controller interfaces. G Fully adjustable voltage and current outputs within: -10 to +10 Vdc or +10 to -10 Vdc 0 to 20 mA or 20 to 0 mA  G  Up to 15 magnet positions simultaneously using the Start/Stop output option. G Integral connector replacement options including: Hanging (inline) connectors Adapter cables Field-installed connector kits Parameters Measured variable: Resolution: Non-linearity: Repeatability: Outputs: Specification Displacement Analog: Infinite Digital: 1 ÷ [gradient x crystal freq. (MHz) x circulation] ± 0.02% or ± 0.05 mm (± 0.002 in.), whichever is greater ± 0.001% of full stroke or ± 0.0001 in. (± 0.0025 mm), whichever is greater. Analog: Voltage or current Digital: Start/Stop or PWM  MTS Sensors  45  Temposonics® Linear-Position Sensors Product Catalog 551075 C  G-Series - Analog/Digital-Pulse  OUTPUTS Digital-pulse outputs Temposonics G-Series position sensors provide direct Start/Stop and PWM signals. Standard resolution is 0.004 in. with digital-pulse outputs (when using a 28 MHz counter). Higher resolutions are possible with increased circulations or with the use of higher resolution counters.  Magnet  ADVANCED COMMUNICATION AND PROGRAMMABILITY Temposonics G-Series sensors are preconfigured at the factory by model code designation. For many applications no adjustments are required for normal sensor installation and operation. If, however, sensor parameter changes are desired while in the field, the G-Series sensor is easily programmed. Using external communication for monitoring and programming, there is no need to open the sensor \'s electronics housing. This can simplify installation and commissioning, saving valuable time. Keeping the sensor electronics isolated ensures that seal integrity and the highest product reliability are maintained. The platform technology inside the G-Series position sensor enables:  + Gate To controller, meter r - Gate or other device Input + Start signals - Start to sensor Stop Pulse Output + Stop signals - Stop from sensor  G-Series - Analog/Digital-Pulse  Pulse width is proportional to magnet position PW M  G  START/STOP  Start Pulse  Start Pulse  reflection     Built-in serial interfaces for robust hard-wired serial communication, (RS-422 for digital-pulse outputs and RS-485 for analog outputs). G Remote programmability for operational modes and sensor parameters. G Enhanced monitoring and diagnostic capabilities (see below). Programmable modes and sensor parameters for G-Series position sensors include: For Digital-Pulse outputs G Start/Stop or PWM output mode G Internal or external interrogation mode for PWM mode G Number of recirculations (1 to 20) for PWM mode For Analog outputs G Voltage or Current output mode G Voltage or Current output range G Full adjustment for Null and Span setpoints  G-Series PC configuration and diagnostics software user interface  G-Series sensor information window  Time between Start and Stop pulses is proportional to magnet position  Analog output Temposonics G-Series position sensors with analog output provide direct signals, including voltage (0 to 10 Vdc or -10 to +10 Vdc, forward or reverse acting) and current (4 to 20 mA, or 0 to 20 mA, forward or reverse acting). Both voltage and current outputs allow full adjustments of null and span setpoints, (minimum 2 in. between setpoints). Since the outputs are direct, no signal-conditioning electronics are needed when interfacing with controllers or meters.  Active stroke length (Measuring range) Sensor Ouput  Null (Setpoint 1)  Span (Setpoint 2)  0 to 10 Vdc 10 to 0 Vdc -10 to +10 Vdc +10 to -10 Vdc 4 to 20 mA 20 to 4 mA 0 to 20 mA 20 to 0 mA  To controller, meter or other device  G-Series output setup  Temposonics® Linear-Position Sensors Product Catalog 551075 C  46  MTS Sensors  ENHANCED MONITORING AND DIAGNOSTICS The G-Series simple visual user interface helps resolve the majority of customer installation and troubleshooting issues. Integrated LEDs indicate (refer to LED indicator table):  G  SENSOR CONNECTIONS AND WIRING  Sensor integral connector (D60 Male), standard Pinout/wire color code (integral or extension cable) Pin no.  1  Normal operating conditions G Error conditions, power and sensor/control interface issues G Programming modes (IR or hard wired) Hard-wired G-Series serial communication enables diagnostic feedback at a convenient remote location. Access to internal sensor conditions minimizes troubleshooting efforts and enables the development of more sophisticated controller diagnostic routines. All of these features will simplify sensor installation and maximize operational productivity.  G-Series LED indicator table Green OFF OFF OFF ON ON ON FLASHING FLASHING FLASHING Red OFF ON FLASHING OFF ON FLASHING OFF ON FLASHING Description No power to sensor Self-diagnostic error IR programming mode Normal sensor function Magnet not detected Missing (external) interrogation Serial programming mode Magnet signal weak Power out of range (high or low)  Wire color Function Digital-pulse outputs  Gray (-) Gate for PWM (-) Stop for Start/Stop or Programming (RS-422 TX-)  Function Analog outputs  0 to 10, -10 to +10 Vdc or 4 to 20 mA, 0 to 20 mA or reverse acting: 10 to 0, 10 to -10 Vdc or 20 to 4 mA, 20 to 0 mA Return for pin 1  2  3  4  5 6  Integral 6-pin male D6 connector as viewed from end of sensor  4 5  3 6 2 1  G-Series electronics housing with built-in LEDs  Notes: 1. A grounding lug on the end of the sensor is provided for convenient connection to earth ground. 2. Appropriate grounding of cable shield is required at the controller end. Cable connectors (field-installed 6-pin D6 female) mates with sensor \'s integral connector 6-pin D6 Straight-exit connector Part no. 560700  54 mm (2.1 in.)  G-Series IR Setpoint Programmer (for Analog output sensors) Part no. 380078  IR Signal  G-Series Analog Handheld Programmer Part no. 253294  18 mm (0.7 in.)  D6 90°connector Part no. 560778  37 mm (1.5 in)  54 mm (2.1 in.)  MTS Sensors  47  Temposonics® Linear-Position Sensors Product Catalog 551075 C  G-Series - Analog/Digital-Pulse  (+) Gate for PWM (+) Stop for Start/Stop or Programming for (RS-422 TX+) Yellow (+) Interrogation for PWM Programming (RS-485+) (+) Start for Start/Stop or Programming (RS-422 RX+) Green (-) Interrogation for PWM Programming (RS-485-) (-) Start for Start/Stop or Programming (RS-422 RX-) Red or Brown Supply voltage (+Vdc) Supply voltage (+Vdc) White DC Ground (for supply) DC Ground (for supply)  Pink  SENSOR CONNECTIONS AND WIRING Retrofit connections A variety of retrofit/replacement connection options are available to provide direct backwards compatibility for your application  9 7 5 6 4 F E D 1 3 2 G K J C 10 8 A H B  Analog output connections (voltage or current)  In-line connector RB_ pin no. In-line connector FM_ pin no.  Function (Note 1) 0 to 10, -10 to +10 Vdc, or 4 to 20 mA, 0 to 20 mA or reverse acting (note 2): 10 to 0, +10 to -10 Vdc, or 20 to 4 mA, 20 to 0 mA Return for pin 1 Programming (RS-485 +) Programming (RS-485 -) Supply voltage (+Vdc) DC ground (for supply) No connection No connection No connection No connection  In-line RB connector Option RB _ Notes: 1. The format used to show the voltage and current output range is: [Value at Null (Setpoint 1)] to [Value at Span (Setpoint 2)]. Not all of the available outputs ranges for voltage are shown. 2. If the G-Series sensor is replacing a L-Series sensor where the reverse acting outputs are being used then the wire connections must be changed at the controller. Refer to G-Series Cross Reference, part no. 550967 for details. Note: When using PWM output with internal interrogation both of the interrogation input signals are not used, and can be left unconnected or connected to ground. MS connector In-line: Option FM _ Integral: Option MS0 (digital-pulse output only)  G-Series - Analog/Digital-Pulse  4  D  3 7 8 5 1 2 6 9 10  C G H E A B F J K  Digital pulse output connections (Start/Stop or PWM)  In-line In-line Integral connector connector connector RB_ pin no. FM_ pin no. MSO_ pin no. 3 C C Function (-) Gate for PWM (-) Stop for Start/Stop, or Programming (RS-422 TX -) (+) Gate for PWM (+) Stop for Start/Stop, or Programming (RS-422 TX +) (+) Interrogation for PWM (see note) (+) Start for Start/Stop, or Programming (RS-422 RX +) (-) Interrogation for PWM (see note) (-) Start for Start/Stop, or Programming (RS-422 RX -) Supply voltage (+Vdc) DC ground (for supply) No connection No connection No connection No connection  4 (and 8) 9  D  D  G  G  10  H  H  5 1 2 6 7 ---  E A B F J K  E A B F J K  Square wave neuter output The G-Series sensor can provide a square wave neuter output for backwards compatibility to replace Temposonics I, Temposonics II, and L-Series sensors that produced a neuter output signal. The neuter output option was used for connection to the Analog Output Module (AOM), Digital Interface Box (DIB), and to some custom interface/controllers. Reference the  G-Series Cross Reference , part no. 550967, for neuter output connection information, including adapter cables and field-installed connections.  Temposonics® Linear-Position Sensors Product Catalog 551075 C  48  MTS Sensors  MODEL GH ROD-STYLE SENSOR The G-Series rod-style (model GH) sensor offers modular construction, flexible mounting configurations, and easy installation. It is designed for internal mounting in applications where high pressure conditions exist, (5000 psi continuous, 10,000 psi spike), such as hydraulic cylinders. The Model GH sensor may also be mounted externally in many applications.  Beginning of stroke (Null position) 51 mm (2 in.) Null zone Electronics housing O-Ring 68 mm (2.7 in.) End of stroke Dead zone Stroke dependent refer to chart below  Stroke length  LED window  Integral connector  10 mm (0.39 in.) dia.  A M4 x 59 mm Button-head hex screws (2X) Flat-faced flange 25 mm (0.98 in.)  Sensor rod  Note: See page 57 for mounting and magnet details. Stroke-dependent Dead Zones Stroke Length 50 mm (2 in.) - 5000 mm (197 in.) 5005 mm (197.1 in.) - 7620 mm (300 in.)  Dead Zone 63.5 mm (2.5 in.) 66 mm (2.6 in.)  76 mm (3 in.) Grounding lug Mating connector (6-pin DIN style)  Beginning of stroke (Null position) 51 mm (2 in.) 68 mm (2.7 in.) Null zone O-Ring A  B 25 mm (1 in.) Raised-face flange 25 mm (0.98 in.) 2.5 mm (0.1 in.) C  Housing style Flange type T S M  Description US customary threads with raised-face flange US customary threads with flat-faced flange Metric threads with flat-faced flange  A Flange threads 3/4 -16 UNF-3A 3/4 -16 UNF-3A M18 x 1.5  B Dimensions 44.5 mm (1.75 in.) 44.5 mm (1.75 in.) 46 mm (1.81 in.)  C Dimensions 51 mm (2 in.) 51 mm (2 in.) 53 mm (2.1 in.)  MTS Sensors  49  Temposonics® Linear-Position Sensors Product Catalog 551075 C  G-Series - Analog/Digital-Pulse  44 mm (1.7 in.)  MODEL GP PROFILE-STYLE SENSOR The G-series profile-style (model GP) sensor offers modular construction, flexible mounting configurations, two magnet configurations to choose from, and easy installation. Magnet configuration choices for the profile housing are the captive-sliding magnet or open-ring magnet. shown below. Captive-sliding magnet  Beginning of stroke (Null position) 64 mm (2.5 in.) Grounding lug Electronics housing Integral connector End of stroke Stroke length 12 mm (0.47 in.) Null zone 82 mm (3.2 in.) Dead zone  G-Series - Analog/Digital-Pulse  LED window 44 mm (1.7 in.) 45 mm (1.8 in.)  2 mm (0.07 in.)  Mounting foot M5 screw (2X) or #10 screw (2X)  14.5 mm (0.57 in.)  Profile-style aluminum extrusion  Mounting feet (2X)  Note: See page 58 for installed magnet dimensions.  76 mm (3 in.) Mating connector (6-pin DIN style)  12 mm (0.47 in.) Null zone  Vertical: 18° Horizontal: 18°  Vertical: 18° Horizontal 360° 36 mm (1.4 in.) 45 mm (1.8 in.)  Captive-sliding magnet Style V  Captive-sliding magnet Style S  Open-ring magnet  Note: See page 58 for installed magnet dimensions.  28 mm (1.1 in.) Null zone Stroke length Non-ferrous mounting support and screws Dead zone 66 mm (2.6 in.)  43 mm (1.7 in.)  Integral cable  Beginning of stroke (Null position)  End of stroke Open-ring magnet Style M  Temposonics® Linear-Position Sensors Product Catalog 551075 C  50  MTS Sensors  HOW TO ORDER  2 or 3 digit code depending on output selected  G  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15  SENSOR MODEL GH = Hydraulic rod-style GP = Profile style HOUSING STYLE Model GP profile-style sensor (magnet included): Captive-sliding magnet with joint at top (part no. 252182) Captive-sliding magnet with joint at front (part no. 252184) Open-ring magnet (part no. 251416-2) Model GH rod-style sensor only (magnet must be ordered separately): US customary threads, raised-faced flange and pressure tube, standard US customary threads, flat-faced flange and pressure tube, standard Same as option  T , except uses fluoroelastomer seals for electronics housing Same as option  S , except uses fluoroelastomer seals for electronics housing Metric threads, flat-faced flange and pressure tube, standard Same as option  M , except uses fluoroelastomer seals for electronics housing Sensor cartridge only, no flange and pressure tube stroke length < 1830 mm (72 in.)  Retrofit documents:  1. Refer to G-Series Cross Reference part numbers 550967 and 550956 for information about backwards compatible replacement options, including integral cables with in-line connectors, adapter cables, and field-installed connector kits. Contact the factory for special offers. 2. Refer to the G-Series User \'s Manual, part no. 550966 for initial setup information. 3. Refer to G-Series installation drawings, part no \'s. 550953 and 550955 for installation information.  S= V= M=  T= S= U= H= M= V= B=  Stroke length notes:  1. GH Voltage or Current = 50 mm (2 in.) to 2540 mm (100 in.) (see Note 6 on page 52). 2. GH Digital Pulse = 50 mm (2 in.) to 7620 mm (300 in.) 3. GP Voltage or Current = 50 mm (2 in.) to 2540 mm (100 in.) (see Note 6 on page 52). 4. GP Digital Pulse = 50 mm (2 in.) to 5080 mm (200 in.)  STROKE LENGTH __ __ __ __ M = Millimeters (Encode in 5 mm increments) __ __ __ . __ U = Inches and tenths (Encode in 0.1 in. increments) CONNECTION TYPE Integral connector: D60 = 6-pin DIN (M16), male, standard MS0 = 10-pin MS style, male (digital-pulse output only) Integral cables:  Cable length notes:  1. MTS recommends the maximum integral cable length to be 10 meters or 33 ft. 2. Cables greater than 10 meters in length are available, however, proper care must be taken during handling and installation.  R __ __ = Integral cable, PVC jacket, pigtail termination. F__ __ = Integral cable, black polyurethane jacket with pigtail termination (see Note 1 on page 52)  Cable length: __ __ = 1 (01) to 30 (30) meters or 1 (01) to 99 (99) ft. Encode in meters if using metric stroke length, encode in feet if using US customary stroke length RB1 = RB2 = FM1 = FM2 = FD1 = FD2 = 1= 2= A= B= Integral cables with in-line connectors: 1 ft. integral cable, PVC jacket, with male in-line RB connector (see Note 2 on page 52) 5 ft. integral cable, PVC jacket, with male in-line RB connector (see Note 2 on page 52) 1 ft. integral cable, PUR jacket, with male in-line 10-pin MS connector (see Notes 1 and 3, page 52) 5 ft. integral cable, PUR jacket, with male in-line 10-pin MS connector (see Notes 1 and 3, page 52) 1 ft. integral cable, PUR jacket, with male in-line 6-pin DIN (M16) connector (see Note 1 on page 52) 5 ft. integral cable, PUR jacket, with male in-line 6-pin DIN (M16) connector (see Note 1 on page 52) INPUT VOLTAGE + 24 Vdc (+20%, - 15%), standard +9 to +28.8 Vdc (see Note 4 on page 52) Same as option  1  except includes the High Vibration-Resistant (HVR) option, model GH only, Stroke length: 50 mm (2 in.) to 2000 mm (78.7 in.) (see Note 8 on page 52) Same as option  2  except includes the High Vibration-Resistant (HVR) option, model GH only, Stroke length: 50 mm (2 in.) to 2000 mm (78.7 in.) (see Note 8 on page 52) OUTPUT (Selections are continued on page 52) L-Series retrofit notes:  1. For stroke lengths< or = to 1525 mm (60 in.), either + 15 volts or +24 volts could be used for L-Series. Therefore, choose the appropriate G-Series option based on the power supply used. Choose option  2  if not certain. 2. For stroke lengths > 1525 mm (60 in.), choose G-Series option  1 .  MTS Sensors  51  Temposonics® Linear-Position Sensors Product Catalog 551075 C  G-Series - Analog/Digital-Pulse  HOW TO ORDER (Continued)  (Selections below are continued from the previous page)  13  14  15  G-Series - Analog/Digital-Pulse  V0 = V1 = V2 = V3 = V4 = V5 = V6 = V7 = V8 = V9 = A0 = A1 = A2 = A3 = RO X RF X DI X FI X  OUTPUT (2 or 3 digit code depending on output selected) Voltage (format below is: Voltage [value at Null (Setpoint 1)] to [value at Span (Setpoint 2)] : 0 Vdc to +10 Vdc +10 Vdc to 0 Vdc -10 Vdc to +10 Vdc +10 Vdc to -10 Vdc 0 Vdc to +5 Vdc +5 Vdc to -5 Vdc -10 Vdc to 0 Vdc 0 Vdc to -10 Vdc -5 Vdc to +5 Vdc +5 Vdc to 0 Vdc Current (format below is: Current [value at Null (Setpoint 1)] to [value at Span (Setpoint 2)] : 4 mA to 20 mA 20 mA to 4 mA 0 mA to 20 mA 20 mA to 0 mA  Digital pulse = Start/Stop. If more than one magnet, the X denotes the number of magnets in hexadecimal (2 to F). = Start/Stop with Closed-Error Signal Utility, (see Note 7). If more than one magnet, the X denotes the number of magnets in hexadecimal (2 to F). = PWM, internal interrogation, the X denotes the number of circulations in hexadecimal (1 to F), and G = 16 to K = 20 circulations. = PWM, internal interrogation with Closed Error Signal Utility (See Note 7).The X denotes the number of circulations in hexadecimal (1 to F), and G = 16 to K = 20 circulations. DE X = PWM, external interrogation, the X denotes the number of circulations in hexadecimal (1 to F), and G = 16 to K = 20 circulations. FE X = PWM, external interrogation with Closed Error Signal Utility (See Note 7).The X denotes the number of circulations in hexadecimal (1 to F), and G = 16 to K = 20 circulations. NO X = Start/Stop output wired for square wave neuter, ( + Stop  used for neuter output pulse). If more than one magnet, the X denotes the number of magnets in hexadecimal (2 to F), (see Note 5). Notes: 1. Polyurethane jacketed cable for use where higher resistance to moisture, oil, and other environmental conditions are required. 2. Wired for analog, digital-pulse, or neuter, depending on output selected. For Temposonics II and model LH replacements/retrofits only. Refer to G-Series Cross Reference part numbers 550967 and 550956 for more information. 3. Wired for analog and digital-pulse depending on output selected. Use for model LH replacements or retrofits. Refer to the G-Series Cross Reference document, part number 550956 for more information. 4. Selected when retrofitting sensors with +/- 15 Vdc input voltages. 5. For Temposonics I, Temposonics II, and model LH neutered output sensor retrofits only. Refer to the G-Series Cross Reference documents, part numbers 550956 and 550967 for more information. 6. Stroke lengths longer than 2540 mm (100 in.) for analog outputs are available on a custom basis. 7. When shock and vibration events exceed the sensor specification rating, the Closed Error Signal Utility (option  F ) will provide either PWM or Start/Stop outputs, which are backwards compatible to interface cards/controllers designed for the legacy Temposonics II and L-Series sensor models. For more information about the Closed Error Signal Utility (option  F ), refer to Application Note, part number 550983. 8. The High Vibration-Resistant (HVR) option provides the model GH rod-style sensors with increased resistance to shock and vibration for use in heavy duty machinery. Refer to  G-Series and R-Series Sensors for High Shock and Vibration Applications , part no. 551073 for more information. Table C: Decimal: Hexadecimal: Decimal: Hexadecimal:  1 1 8 8  2 2 9 9  3 4 5 3 4 5 10 11 A B  6 7 6 7 12 13 14 15 C D E F  Temposonics® Linear-Position Sensors Product Catalog 551075 C  52  MTS Sensors  ",3190);arrFiles[108]=new Array(109,"HTML/MTS-ER-Brochure-2011.pdf","13 May 2011","Product Data Sheet, 551248 Rev A","","E-Series Models EP and EL Analog and Digital-Pulse (Start/Stop) Output Sensors","Temposonics  ®  ®  Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Model ER Analog and Digital-Pulse (Start/Stop) Outputs  Data Sheet  SENSORS  Document Part Number: 550996 Revision E  Model ER position sensorStroke Length: 50 mm to 1500 mm (2 in. to 60 in.)  FEatuRES  Linear, absolute Measurement  Non-Contact Sensing technology  Linearity Deviation Less than 0.02% F.S.  Repeatability Within 0.001% F.S.  two Outputs available: · Analog(Voltage/Current)ForwardorReverseActing · Digital-PulseOutput(Start/Stop)  SimpleSensorParameterUpload(forStart/Stop)  Stroke Length Range: 50 mm to 1500 mm (2 in. to 60 in.)  Internal Electronics are Sealed for IP67 Ingress Protection  EMI Shielded and CE Certified BENEFItS  Rugged, Cost Effective, Precise and Durable Non-wear alternative to Linear Potentiometers  Extendable and Retractable Dual Rod Ends  the Magnet is Contained and Protected Inside the Sensor Housing  OverVoltageProtectionto36VdcandPolarityProtection  upto-30Vdc aPPLICatIONS  Continuous Operation In Harsh Industrial Conditions tyPICaL INDuStRIES  Factory automation  Woodworking and Metal Forming  Material Handling and Packaging time-based Magnetostrictive position sensing principle  Movable position magnet  Magnetic field encompasses entire waveguide - generated by the interrogation pulse Interrogation Return wire Waveguide Strain-Pulse detector Bias magnet Magnetic field from position magnet Interaction of magnetic fields causes waveguide to generate a strain pulse  Benefits of Magnetostriction Temposonics linear-position sensors use the time-based magnetostrictive position sensing principle developed by MTS. Within the sensing element, a sonic-strain pulse is induced in a specially designed magnetostrictive waveguide by the momentary interaction of two magnetic fields. One field comes from a movable permanent magnet that passes along the outside of the sensor. The other field comes from an  interrogation  current pulse applied along the waveguide. The resulting strain pulse travels at sonic speed along the waveguide and is detected at the head of the sensing element. The position of the magnet is determined with high precision and speed by accurately measuring the elapsed time between the application of the interrogation pulse and the arrival of the resulting strain pulse with a high-speed counter. The elapsed time measurement is directly proportional to the position of the permanent magnet and is an absolute value. Therefore, the sensor \'s output signal corresponds to absolute position, instead of incremental, and never requires recalibration or re-homing after a power loss. Absolute, non-contact sensing eliminates wear, and guarantees the best durability and output repeatability.  All specifications are subject to change. Contact MTS for specifications and engineering drawings that are critical to your application. Drawings contained in this document are for reference only. Go to http://www.mtssensors.com for the latest product documentation and related media.  E-SeriesModelERSensor,AnalogandStart/StopOutputs Product Overview and Specifications  MTS Sensors continues to establish new performance standards for low-cost, fully-industrial, durable position sensors using the widely preferred magnetostrictive technology. This principle for accurate and non-contact measurement of linear-position sensing was developed 30 years ago by MTS and is used with outstanding success in a large variety of industrial applications. The innovative Temposonics model ER sensor brings proven benefits of magnetostrictive feedback to the versatile rod-and-cylinder sensor package. It is ideal for demanding industrial applications where high performance non-contact feedback is essential for maximum productivity and overall reliability. The model ER sensor \'s rod-and-cylinder design has a rod that can extend from the sensor housing. As the rod is extended and retracted, the sensing magnet remains completely contained and protected at all times, ensuring reliable sensor performance in the toughest industrial environments.  Product specifications  Parameters OutPut Measured output variables: Resolution: Position analog: Infinite (restricted by output ripple) Start/Stop: 0.1, 0.01 and 0.005 mm (controller dependent) < ± 0.02% full stroke (minimum ± 60 µm) < ± 0.001% full stroke (minimum ± 5 µm) analog (voltage or current) Voltage: 0 to 10 Vdc and 10 to 0 Vdc or two outputs: 0 to 10 Vdc and 10 to 0 Vdc (controller input resistance RL  5k Ohm) Current: 4 to 20 mA or 20 to 4 mA (Controller input resistance RL  500 Ohm) Digital-pulse(Start/Stop): RS-422 differential signal Serial parameter upload available for: Measuring range, offset, gradient, status and manufacturer number Stroke length: ELECtRONICS Operating voltage: +24Vdcnominal:-15% or +20% Polarity protection: up to -30 Vdc Over voltage protection: up to 36 Vdc Current drain: Analog: 50 - 140 mA Start/Stop: 50 - 100 mA (Stroke length dependent) Dielectric withstand voltage: 500 Vdc (DC ground to machine ground) Range: 50 mm to 1500 mm (2 in. to 60 in.) EMC test: Specifications Parameters ENVIRONMENTAL Operating conditions: Operating temperature: -40 °C (-40 °F) to 75 °C (167 °F) Relative humidity: 90% no condensation Ingress protection: IP 67 (when mating connector is correctly fitted) Electromagnetic emission: EN 61000-6-4, CISPR 16 Electromagnetic susceptibility: EN 61000-6-2, EN 61000-4-2/3/4/6, CE qualified 100 g (single hit)/ IEC standard EN 60068-2-27 10 g/10 to 2000 Hz, IEC standard EN 60068-2-6 (resonance frequencies causing excess of 10 g are excluded) analog output: 5-pin (M12) male integral connector Start/Stopoutput: 8-pin (M12) male integral connector Aluminum Aluminum Adjustable mounting clamps or dual rod ends Specifications  Linearity deviation: Repeatability: Outputs:  Shock rating: Vibrationrating:  WIRINg Connection types:  ROD-aND-CyLINDER StyLE SENSOR Sensor rod: Sensor housing: Mounting options:  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model ER, Document Part No.: 550996, Revision E 02-11  2  MTS Sensors  E-SeriesModelERSensor,AnalogandStart/StopOutputs Communication and Programmability  Outputs  ANALOg(VOLTAgE/CURRENT)OUTPUTS  Analog outputs include voltage (0 to 10 Vdc forward or reverse acting), and current (4 to 20 mA forward or reverse acting). Since the outputs are direct, no signal conditioning electronics are needed when interfacing with controllers or meters (see  \'Figure 1 \'). analog output voltages ranges: · 0 to 10 Vdc · 10 to 0 Vdc · 0 to 10 Vdc and 10 to 0 Vdc · 4 to 20 mA · 20 to 4 mA  Active stroke length (Measuring Range) Output value  w For ting  ac ard  Rev  ers  e ac  ting  ®  Position magnet  Figure 1. Analog Output signals  DIgITALSTART/STOPOUTPUT  The Temposonics E-Series Model ER Start/Stop output sensors require a start signal from a controller or interface module to initiate the measurement cycle. The sensor generates a stop signal at the end Start signal from controller or of the measurement cycle that is used to stop the interface module controller \'s counter clock.  Start/Stop  + Start - Start  Start Pulse  Input signals to sensor  Start pulse `reflection´ The elapsed time between the Start and Stop signals + Stop - Stop is directly proportional to the magnet \'s position along the active stroke length. The controller can calculate the absolute position of the magnet from Time between `Start \' and `Stop \' pulses the time value and the sensor \'s unique gradient value is proportional to magnet position (inverse of the speed for the sonic pulse traveling in Figure 2. Start/Stop output signals (RS-422 differential pairs) the sensor \'s waveguide). (see  \'Figure 2 \').  Stop pulse  Output signals from sensor  Communication and programmability  For applications using smart sensor interfaces, the Model ER sensor with Start/Stop output (Option R3) comes with the ability to perform sensor parameter uploads. This feature replaces the task of entering sensor data manually, saving time and preventing possible entry errors during start-up or for system maintenance. Note:Start/Stopoutput(optionR3) When the sensor parameter upload feature is not activated the Start/Stop output (Option R3) remains fully compatible with the Start/Stop output (Option R0) used in the previous generation E-Series sensor family.  SENSOR PaRaMEtER uPLOaD FEatuRE  the upload feature supports the following sensor parameters: · Measuring range · Offset · Gradient - (Shown as speed of the sonic-strain pulse (m/s) or inverse speed (s/in.) · Status · Manufacturer number The sensor \'s specific parameters can be retrieved by the controller and interface module at any time, via the sensor \'s Start/Stop signal lines. The sensor parameter upload feature requires a customer supplied RS-422 interface. The data format is serial, 4800 Baud, 8-bit data length. Please contact the factory for additional parameter upload protocol details.  MTS Sensors  3  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model ER, Document Part No.: 550996, Revision E 02-11  E-SeriesModelERSensor,AnalogandStart/StopOutputs Sensor Dimensions and Mounting  Model ER rod-and-cylinder sensor dimension references  Drawings are for reference only, contact applications engineering for tolerance specific information. A robust aluminum extrusion forms the sensor housing containing the sensor rod, magnet, sensing element and electronics. The permanent magnet is mounted on a sliding carrier attached to the end of the rod. As the rod moves in and out, the magnet travels above the sensing element inside the sensor housing.  MODEL ER ROD-aND-CyLINDER SENSOR  Rod end accessory (M12) 18 mm (0.7 in.) Mounting clamp 20 mm (0.8 in.) 50 mm (1.97 in.) 68 mm (2.68 in.) 51 mm (2.0 in.) 38 mm (1.5 in.) 5-pin or 8-pin (M12) 25 mm (1 in.) 61 mm (2.4 in.) Beginning of stroke Null position Stroke length 50 to 1500 mm (2 in. to 60 in.) End of stroke  71.5 mm (2.8 in.) Dead zone 3 mm (0.1 in.)  25 mm (1 in.)  2 mm (0.08 in.)  Mounting clamp part no.: 403508  Rod end (see accessories)  Figure3. E-Series model ER rod-and cylinder sensor dimension reference  Sensor mounting (Model ER)  SENSOR MOuNtINg CLaMPS The E-Series model ER sensor is mounted onto the machine with moveable mounting clamps. Grooves for mounting clamps are available on three sides of the sensor housing, allowing versatile mounting orientations for the sensor \'s connector and extension cable. The rod is then attached to the moving machine part. Optional rod ends can be used to simplify sensor installation design and facilitate articulated motion sensing. Using dual rod ends the model ER sensor can be mounted between two independent moving points, such as swinging door applications. Please note for model ER sensors having stroke lengths over 750 mm (30 in.) only the first 90% of the stroke length can be used for articulated type applications when the weight of the sensor is supported only by rod ends.  Notes: 1. Mounting clamps are ordered separately. Two mounting clamps, (part number 403508) are required for stroke lengths up to 750 mm (30 in.). A least one additional mounting clamp is required for longer stroke lengths. 2. MTS recommends using 10-32 cap screws (customer supplied) at a maximum torque of 44 in. lbs. when fastening mounting clamps.  Model ER sensor mounting and installation reference  4 Holes 5.4 mm (0.21 in.) dia. 2 mm (0.08 in.)  Mounting method  31 mm (1.2 in.)  50 mm (1.97 in.) 9 mm (0.36 in.) 10 mm (0.4 in.)  Part number  68 mm (2.68 in.)  Mounting clamp Sensor mounting for sensor model ER  403508  Mounting clamp width: 14.6 mm (0.57 in.)  Mounting clamp  three possible mounting configuration using mounting clamp and screws  Mounting clamp, part number 403508  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model ER, Document Part No.: 550996, Revision E 02-11  4  MTS Sensors  E-SeriesModelERSensor,AnalogandStart/StopOutputs Sensor Mounting  Model ER sensor mounting and installation reference  36 mm (1.4 in.) 21 mm 15 mm 36 (0.8 (1.4 in.) mm in.) (0.6 in.) 21 mm 15 mm (0.8 in.) (0.6 in.) 1/4 - 28 UNF 6 mm (0.24 in.) dia. 6 mm (0.24 in.) dia. 7.2 mm (0.3 in.)  7.2 mm (0.3 in.)  Mounting method  Rod end US customary measurement Optional, male 1/4 - 28 threads  Part number  254235  27 mm (1.1 in.) 27 mm 9.5 mm (0.4 in.) (1.1 in.)  9.5 mm (0.4 in.)  1/4 - 28 UNF  36 mm (1.4 in.) 21 (1.4 36 mm mm in.) 15 mm (0.8 in.) (0.6 in.) 21 mm 15 mm (0.8 in.) (0.6 in.) M6 x 1  M6 x 1  (0.24 in.) dia.  6 mm (0.24 6 mm in.) dia.  27 mm 27(1.1 in.) mm (1.1 in.) 9.5 mm (0.4 in.)  9.5 mm (0.4 in.)  Rod end Metric measurement Optional, male M6 threads  254210  7.2 mm (0.3 in.) 7.2 mm (0.3 in.)  53 mm (2.1 in.)  1/4 in. Jam nut Threaded rod Mounting hardware: (1/4 - 28 UNF) 1/4 in. Hex nuts (2 ea.) 14 mm (0.56 in.) O.D. Washer  Stud end Optional mounting hardware kit Hex nuts (2 pcs.), jam nut and washer  251975  MTS Sensors  5  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model ER, Document Part No.: 550996, Revision E 02-11  E-SeriesModelERSensor,AnalogandStart/StopOutputs Connections and Wiring  Connections and wiring (Model ER)  SENSORINTEgRALCONNECTOR(D34ANDD84)PINOUT/wIRECOLORCODES  The E-Series model ER sensor connects directly to a controller or interface module with the standard male, 5-pin or 8-pin integral connector and an extension cable as described in `Table 1 \' and `Table 2 \' below.  Grounding lug  attention: The sensors aluminum housing has an anodic coating which prevents the sensor \'s mounting clamps from providing the appropriate grounding. A grounding lug (see `Figure 4 \') is provided near the connector end of the sensor for a convenient connection to earth ground. The appropriate grounding of the cable shield is also required at the controller end.  ®  Figure 4. Grounding lug location.  2 3 5  1 4  IntegralD34connector(male)asviewedfrom the end of the sensor Extension Cable Wire color Brown White Blue Black Green Signal/Function analog outputs +24 Vdc Output signal DC ground (for power return) 2nd Output signal (optional) Ground for signal return  2 1 3 8 7 4 6 5  Integral D84 connector (male) as viewed from the end of the sensor Extension cable wire color White Brown Green Yellow Gray Pink Blue Red Signal/function Start/Stopoutputs (+) Start (-) Start (+) Stop (-) Stop No connection No connection +24 Vdc DC ground (for power return)  Pin no. 1 2 3 4 5  Pin no. 1 2 3 4 5 6 7 8  table 1. Integral D34 sensor connector (mates with cable connectors 370618 and 370619)  table 2. Integral D84 sensor connector (mates with cable connectors 370671 and 370672)  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model ER, Document Part No.: 550996, Revision E 02-11  6  MTS Sensors  E-Series Model ER Sensor CableConnectorOptions(D34andD84)  MATINgCAbLECONNECTOROPTIONSFOR(D34)CONNECTORTyPES (Photo and drawing dimensions are for reference only) Connector and dimensions Description  Female cable connector, straight exit (Field installable) 5-Pin (D34) Mates with standard male (M12) integral connector termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67  Part number  370618  52 mm (2.0 in.) 20 mm (0.8 in.) dia.  35 mm (1.4 in.) 20 mm (0.8 in.) dia. 40 mm (1.6 in.)  Female cable connector, 90° exit (Field installable) 5-Pin (D34) Mates with standard male (M12) integral connector termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67 Description  Female cable connector, straight exit (Field installable) 8-Pin (D84) Mates with standard male (M12) integral connector termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67  370619  MatINg CaBLE CONNECtOR OPtIONS FOR (D84) CONNECtOR tyPES (Photo and drawing dimensions are for reference only) Connector and dimensions Part number  370671  52 mm (2.0 in.) 20 mm (0.8 in.) dia.  35 mm (1.4 in.) 20 mm (0.8 in.) dia. 40 mm (1.6 in.)  Female cable connector, 90° exit (Field installable) 8-Pin (D84) Mates with standard male (M12) integral connector termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67  370672  MTS Sensors  7  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model ER, Document Part No.: 550996, Revision E 02-11  E-Series Model ER Sensor M12 Cord Sets and adapter Cable Options  M12 CORD SEtS aND (M16) aDaPtER CaBLE OPtIONS (Photo and drawing dimensions are for reference only) Cord set and dimensions Description Part number  M12 Cord set, female connector, Straight exit 5-Pin (M12) mates with standard male (D34) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370673  15 mm (0.59 in.) dia. M12 x 1  26.5 mm (1.04 in.)  (Image not available)  8.8 mm (0.35 in.) dia. 11.6 mm (0.46 in.) dia. 12 mm (0.47 in.)  31.5 mm (1.24 in.)  M12 Cord set, female connector 90° exit 5-Pin (M12) mates with standard male (D34) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370675  M12 Cord set, female connector, straight exit 8-Pin (M12) mates with standard male (D84) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370674  15 mm (0.59 in.) dia. M12 x 1  26.5 mm (1.04 in.)  (Image not available)  8.8 mm (0.35 in.) dia. 11.6 mm (0.46 in.) dia. 12 mm (0.47 in.)  31.5 mm (1.24 in.)  M12 Cord set, Female, Connector 90° Exit 8-Pin (M12) mates with standard male (D84) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370676  adapter cable and dimensions  Description  adapter cable 5-Pin female (M12) connector, straight exit to 6-pin male D60 (M16) connector, straight exit Ingress protection: IP67 adapter cable 8-Pin female (M12) connector, straight exit to 6-pin male D60 (M16) connector, straight exit  Part number  (Image not available)  254206  (Image not available)  254207  Ingress protection: IP67  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model ER, Document Part No.: 550996, Revision E 02-11  8  MTS Sensors  E-SeriesModelERSensor,AnalogandStart/StopOutputs Sensor Ordering Information  Use the order matrix below to configure your Model ER sensor order number.  E  1  R  2 3 4 5 6 7 8  D  9 10 11  1  12 13 14 15  SENSOR MODEL ER S M = E-Series model ER position sensor HOuSINg StyLE = Inside thread 1/4 - 28 at end of rod (For model ER sensors using US customary stroke length measurement) = Inside thread M6 at end of rod ( For model ER sensors using metric stroke length measurement) StROKE LENgtH -------- ------.0 =  =  E R  =  1-2 3  4-8  M = Millimeters (Encode in 25 or 50 mm increments) as indicated in `Stroke length notes \' below. u=  Inches (Encode in 1 or 2 in. increments) as indicated in `Stroke length notes \' below. (Digit for tenths of inches is always `0 \') Stroke length Notes:  Stroke length ranges:  M = 50 to 1500 mm (Preferred stroke lengths are: 75,100, 150, 200, 300, 400, 500, 600, 750, 1000 and 1250 mm) u = 2 to 60 in. (Preferred stroke lengths are: 3, 6, 9,12, 15, 18, 22, 24, 30, 42, 48 and 54 in.)  the increment size between standard stroke lengths vary as shown below:  Stroke length (mm) Ordering increment   500 mm > 500 mm and  1500 mm  Stroke length (IN)  25 mm 50 mm  Ordering increment   20 in. > 20 in. and  60 in. SENSOR CONNECtION tyPES D34 D84 1 = 5-Pin (M12), male, (Analog output) = 8-Pin (M12), male, (Start/Stop output) INPUTVOLTAgE = + 24 Vdc (+20%, -15%), standard OutPut  VOLTAgE  1 in. 2 in. =  D  9 - 11  = =  1  12 13-15  (2 or 3 digit code defined by output option selected below)  V01 V11 V03 a01 a11 R3  = 0 to 10 Vdc = 10 to 0 Vdc = 0 to 10 Vdc and 10 to 0 Vdc (2 output channels)  CuRRENt  = 4 to 20 mA = 20 to 4 mA  START/STOP  = Start/Stop with sensor parameters upload function Start/Stop output (Option R3) is fully compatible with the Start/Stop output (Option R0) used in the previous generation E-Series sensors.  MTS Sensors  9  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model ER, Document Part No.: 550996, Revision E 02-11  Document Part Number: 550996, Revision E 02-11 MTS and Temposonics are registered trademarks of MTS Systems Corporation. All other trademarks are the property of their respective owners. Printed in USA. Copyright © 2011 MTS Systems Corporation. All Rights Reserved in all media.  MtS Systems Corporation Sensors Division  ®  MtS Sensor technologie gmbH & Co. Kg Auf dem Schüffel 9 D - 58513 Lüdenscheid, Germany Tel.: +49-2351-9587-0 Fax: +49-2351-56491 e-mail: info@mtssensor.de http://www.mtssensor.de  MtS Sensors technology Corporation 737 Aihara-cho, Machida-shi Tokyo 194-0211, Japan Tel.: +81-42-775-3838 Fax: +81-42-775-5516 e-mail: info@mtssensor.co.jp http://www.mtssensor.co.jp  SENSORS  3001 Sheldon Drive Cary, North Carolina 27513, USA Tel.: +1-800-633-7609 Fax: +1-919-677-2343 +1-800-498-4442 e-mail: sensorsinfo@mts.com http://www.mtssensors.com  ",2169);arrFiles[109]=new Array(110,"HTML/MTS-EP2-Analog.pdf","19 Aug 2009","Unknown","","","Temposonics®  Magnetostrictive Linear-Position Sensors  E-Series EP2, Analog Output  550919 D  R  SENSORS  Product Specification  Model EP2 linear-position sensor single-position measurement  I I I I I I I I  Linear, absolute measurement Non-contact sensing technology Non-linearity less than 0.02% Repeatability within 0.001% Direct position output: Analog 0-10 V EMI shielded and CE certified Measuring range from 4 to 60 inches One year warranty  The benefits of magnetostrictive sensing  Temposonics linear-position sensors use the time-based magnetostrictive position sensing principle developed by MTS. Within the sensing element, a sonic-strain pulse is induced in a specially-designed magnetostrictive waveguide by the momentary interaction of two magnetic fields. One field comes from a movable permanent magnet that passes along the outside of the sensor. The other field comes from an  interrogation  current pulse applied along the waveguide. The resulting strain pulse travels at ultrasonic speed along the waveguide and is detected at the head of the sensing element. The position of the magnet is determined with high precision and speed by accurately measuring the elapsed time between the application of the interrogation pulse and the arrival of the resulting strain pulse with a high speed counter. Using the elapsed time to determine position of the permanent magnet provides an absolute position reading that never needs recalibration or re-homing after a power loss. Non-contact sensing eliminates wear, and guarantees the best durability and output repeatability.  All specifications are subject to change. Please contact MTS for specifications that are critical to your needs.  Temposonics Model EP2 linear-position sensor parameters  There is a new standard of excellence in position sensing. The Temposonics EP2 sensor establishes new performance standards for low-cost, fully-industrial, durable position sensors using the widely preferred magnetostrictive technology. This principle for accurate and non-contact measurement of linear-position sensing was developed 30 years ago by MTS and is used with outstanding success in a large variety of industrial applications. Industrial applications include harsh environmental conditions such as presses, injection molding, tire presses, rolling plants, tunnel driving machines and hydraulic units. Analog output Temposonics E-Series Model EP2 analog output sensors come with integrated analog conditioning electronics. The sensor can be connected to a control system or indicator directly without the need for an additional interface. The built-in microelectronics produce a continuous voltage output that is proportional to the magnet position. The active measurement stroke range is factory set as shown on page 3.  Active stroke length 10 V Sensor Ouput 0V Position magnet 0-10 V To controller, meter, etc. Sensing element (Measuring range)  Parameters Measured variable: Resolution: Non-linearity: Repeatability: Outputs: Update frequency: Measuring ranges: Operating conditions:  Specification Displacement Infinite, restricted by output ripple < ± 0.03% full scale , minimum ± 90 µm < ± 0.005% full scale 0 - 10 Vdc Controller input resistance RL >5 kOhm > 1.5 kHz 4, 6, 9, 12, 15, 18, 21, 24, 30, 36, 42, 48, 54, 60 in. Temperature: - 40 to 75 °C (- 40 to +167 °F) Relative humidity: 90% no condensation Ingress protection: IP67 Shock test: 50 g (single hit) IEC-Standard 68-2-27 Vibration rating: 5 g/10 - 2000 Hz IEC-Standard 68-2-6 Electromagnetic emission: EN 50081-1 Electromagnetic immunity: EN 50082-2 EN 61000-4-2/3/4/6 Criteria A, CE qualified + 24 Vdc nominal (-15% or +20%) Polarity protection: up to -30 Vdc Overvoltage protection: up to 36 Vdc Current drain: 50 - 140 mA (stroke length dependent) Dielectric withstand voltage: 500 Vdc (DC ground to machine ground) Integral cable Aluminum Adjustable mounting feet Block magnet with stamped metal carrier  EMC test:  Operating voltage:  Connection type: Sensor extrusion: Mounting: Magnet type:  2  MTS Sensors Product Specification 550919 D  Temposonics Model EP2 linear-position sensor  Dimensions  Null position 11 mm (0.43 in.) Mounting plate Position magnet M4 nut 14 mm (0.55 in.) Mounting screw / nut 25 mm (0.98 in.)  Max. gap 3 mm (± 2 mm) (0.12 ± 0.08 in.)  3 mm (0.12in.)  PVC Cable 5 m (16.4 ft.) Mounting feet  14.5 mm (0.57 in.)  27 mm (1.06 in.) 36 mm (1.42 in.)  Through mounting holes (X2)  19 mm (0.7 in.)  Null Zone 72.5 mm (2.85 in.)  Measurement stroke length  Dead zone 72.5 mm (2.85 in.)  Measurement stroke lengths: 4, 6, 9, 12, 15, 18, 21, 24, 30, 36, 42, 48, 54, 60 in. (only)  Connections  Green wire  PVC cable, 5 mm dia..  Brown wire White wire Shield  Wiring diagram Wire color Signal Green 0 - 10 V Brown +24V Vdc (-15% / +20%) White DC Ground (0 V) Shield Connected to sensor housing (Appropriate grounding of cable shield is required.)  Sensor mounting The sensor is fixed onto a flat straight surface of the machine with moveable mounting feet. A pair (2) of mounting feet are provided with each sensor. Additional mounting feet are provided for measurement stroke ranges greater than 48 inches. These mounting feet slide onto the sensor via channels in the extrusion and should be evenly distributed along its length. Refer to the drawing on page 3. When fastening the mounting feet, 10-32 cap screws are recommended at a maximum torque of (44 in. lbs.).  Mounting foot Standard mounting foot part no. 400802  0.213 in. dia. through 4 holes 1.9 mm (0.075 in.) 50 mm (1.97 in.) 68 mm (2.68 in) Width = 14.5 mm (0.57 in.) 304 SST 27.9 mm (1.1 in.) 9.1 mm (0.36 in.) 9.1 mm (0.36 in.)  Position magnet The floating magnet (block style L) mounts on the moving machine part and travels just above the sensor \'s extrusion. It can be mounted using ferrous metal screws and support bracket. However, the support bracket can not extend beyond 11 mm (0.43 in.)from the top of the magnet, unless it is made of non-ferrous material. The magnet should be installed with a perpendicular orientation relative to the top surface of the sensor extrusion as shown on page 3. Optimal performance is achieved when this orientation remains consistent throughout the full measurement stroke range.  Block magnet, style L part no. 252887  19.5 mm (0.77 in.) 11 mm (0.43 in.) 31 mm (1.22 in.) 13.5 mm (0.53 in.) 6 mm (0.24 in.) 20 mm (0.79 in.)  O 4.3 mm (0.17 in.)  3  MTS Sensors Product Specification 550919 D  Sensor ordering information  How to order The EP2 sensor model With an integral cable, analog output (voltage) Notes: Temposonics Model EP2 sensors include one magnet (part no. 252887), and two mounting feet (part numEP2A - _ _ _ ber 400802) for sensors up to 48 inches of stroke Measuring stroke length (inches) length. Additional mounting feet are included for stroke 004 / 006 / 009 / 012 / 015 / 018 / 021 / 024 / 030 / 036 / 042 / 048 / 054 / 060 lengths over 48 inches.  Accessories Description Function/Notes Mounting feet, standard (spares) Model EP2 sensors come with mounting feet Block style magnet (spare) Style L  floating  magnet (included with EP2 sensors) Part no. 400802 252887  Part Number: 09-06 550919 Revision D MTS and Temposonics are registered trademarks of MTS Systems Corporation. All other trademarks are the property of their respective owners. All Temposonics sensors are covered by US patent number 5,545,984. Additional patents are pending. Printed in USA. Copyright © 2006 MTS Systems Corporation. All Rights Reserved.  UNITED STATES  R  GERMANY  MTS Sensor Technologie GmbH & Co. KG Auf dem Schüffel 9 D - 58513 Lüdenscheid Tel: +49 / 23 51 / 95 87-0 Fax: +49 / 23 51 / 56 491 www.mtssensor.de info@mtssensor.de  JAPAN  MTS Sensors Technology Corporation Ushikubo Bldg. 737 Aihara-cho, Machida-shi Tokyo 194-0211, Japan Tel: + 81 (42) 775 / 3838 Fax:+ 81 (42) 775 / 5516 www.mtssensor.co.jp info@mtssensor.co.jp  SENSORS  MTS Systems Corporation Sensors Division 3001 Sheldon Drive Cary, NC 27513 Tel: (800) 633-7609 Fax: (919) 677-0200 (800) 498-4442 www.mtssensors.com sensorsinfo@mts.com  ",284);arrFiles[110]=new Array(111,"HTML/MTS-EH-Brochure.pdf","20 May 2011","Product Data Sheet, 551250 Rev A","","E-Series Model EH Analog and Digital-Pulse (Start/Stop) Output Sensor","Temposonics  ®  ®  Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Model EH Analog/Digital-Pulse (Start/Stop) Outputs  Data Sheet  SENSORS  Document Part Number: 551250 Revision A  Model EH rod-style position sensor Stroke Length: 50 mm to 2500 mm (2 in. to 100 in.)  FEATuRES  Linear, Absolute Measurement  Non-Contact Sensing Technology  Linearity Deviation Less Than 0.02% F.S.  Repeatability Within 0.001% F.S.  Two Outputs Available: · Analog(Voltage/Current)ForwardorReverseActing · Digital-PulseOutput(Start/Stop)  SimpleSensorParameterUpload(forStart/Stop)  Stroke Length Range: 50 mm to 2500 mm (or 2 in. to 100 in.)  Hermetically-Sealed Stainless Steel For IP69K Ingress Protection  EMI Shielded and CE Certified BENEFITS  Compact Stainless Steel Position Sensor, Designed For use In Hydraulic Cylinders · Standard10mmdia.SensorRodForTypicalApplications · Optional7mmdia.SensorRodForUseInSmallBore Cylinders  Simultaneous Multi-position Measurements  OverVoltageProtectionto36VdcandPolarityProtection  upto-30Vdc APPLICATIONS   Clevis Mounted or Space Limited Cylinder Applications Harsh Industrial Conditions High-Pressure Washdown GatesandValveControl Time-based Magnetostrictive position sensing principle  Movable position magnet  Magnetic field encompasses entire waveguide - generated by the interrogation pulse Interrogation Return wire Waveguide Strain-Pulse detector Bias magnet Magnetic field from position magnet Interaction of magnetic fields causes waveguide to generate a strain pulse  Benefits of Magnetostriction Temposonics linear-position sensors use the time-based magnetostrictive position sensing principle developed by MTS. Within the sensing element, a sonic-strain pulse is induced in a specially designed magnetostrictive waveguide by the momentary interaction of two magnetic fields. One field comes from a movable permanent magnet that passes along the outside of the sensor. The other field comes from an  interrogation  current pulse applied along the waveguide. The resulting strain pulse travels at sonic speed along the waveguide and is detected at the head of the sensing element. The position of the magnet is determined with high precision and speed by accurately measuring the elapsed time between the application of the interrogation pulse and the arrival of the resulting strain pulse with a high-speed counter. The elapsed time measurement is directly proportional to the position of the permanent magnet and is an absolute value. Therefore, the sensor \'s output signal corresponds to absolute position, instead of incremental, and never requires recalibration or re-homing after a power loss. Absolute, non-contact sensing eliminates wear, and guarantees the best durability and output repeatability.  All specifications are subject to change. Contact MTS for specifications and engineering drawings that are critical to your application. Drawings contained in this document are for reference only. Go to http://www.mtssensors.com for the latest product documentation and related media.  TyPICAL INDuSTRIES  Fluid Power Factory Automation Steel Mills Material Handling and Packaging Water Management  E-SeriesModelEHSensor,Analog/Digital-pulse(Start/Stop)Outputs ProductOverview/Specifications  MTS Sensors continues to establish new performance standards for low-cost, fully-industrial, durable position sensors using the widely preferred magnetostrictive technology. This principle for accurate and non-contact measurement of linear-position sensing was developed 30 years ago by MTS and is used with outstanding success in a large variety of industrial applications. The Temposonics model EH sensor provides as much performance as you need for your application - you benefit from the advantages of magnetostrictive position measurement at optimum costs. The Temposonics® Model EH sensor features a pressure resistant sensor rod for direct stroke measurement inside hydraulic cylinders. With its minimized sensor head and either a 7 mm or 10 mm rod, it is the ideal solution when space is critical. For long strokes, the model EH is available with measuring ranges up to 2500 mm (or 100 in.). The model EH sensor offers completely sealed stainless-steel housing for long life position measurement for rugged environments. When installed with the appropriate mating connector and cable, it features protection up to IP69K and is suitable for high-pressure washdown applications.  Product specifications  Parameters OuTPuT Measured output variable: Resolution: Position Analog: Infinite (restricted by output ripple) Start/Stop: 0.1, 0.01 and 0.005 mm (controller dependent) < ± 0.02% full stroke (minimum ± 60 µm) < ± 0.001% full stroke (minimum ± 5 µm) Analog (voltage or current) Voltage:0 to 10 Vdc or 10 to 0 Vdc or Two outputs: 0 to 10 Vdc and/or 10 to 0 Vdc (controller input resistance RL  5k Ohm) Current: 4 to 20 mA or 20 to 4 mA (controller input resistance RL  500 Ohm) Digital-pulse(Start/Stop): RS-422 differential signal Serial parameter upload available for: Measuring range, offset, gradient, status and manufacturer number Stroke length: ELECTRONICS Operating voltage: +24Vdcnominal:-15% or +20% Polarity protection: up to -30 Vdc Over voltage protection: up to 36 Vdc Current drain: Analog: 50 to 140 mA Start/Stop: 50 to 100 mA (Stroke length dependent) Dielectric withstand voltage: 500 Vdc (DC ground to machine ground) Range: 50 mm to 2500 mm (or 2 to 100 in.) Specifications  Parameters ENVIRONMENTAL Operating conditions:  Specifications  Linearity deviation: Repeatability: Outputs:  Operating temperature: -40 °C (-40 °F) to 75 °C (167 °F) Relative humidity: 90% no condensation Ingress protection: IP69K (when appropriate mating connector is correctly fitted) Electromagnetic emission: EN 61000-6-4, CISPR 16 Electromagnetic susceptibility: EN 61000-6-2, EN 61000-4-2/3/4/6, CE qualified 100 g (single hit)/ IEC standard EN 60068-2-27 15 g/10 to 2000 Hz, IEC standard EN 60068-2-6 (resonance frequencies causing excess of 15 g are excluded) Analog output: 5-pin (M12) male integral connector Start/Stopoutput: 8-pin (M12) male integral connector Stainless Steel 1.4305 / AISI 304 Stainless Steel 1.4301 / AISI 304 7mmRod: 300 bar static, 450 bar peak (4350 psi static, 6500 psi peak) 10 mm Rod: 350 bar static, 530 bar peak (5000 psi static, 7700 psi peak) Any orientation. Threaded flange M18 x 1.5 or 3/4 - 16 UNF-3A 45 N-m (33 ft. - lbs.) Ring magnet, open-ring magnet or magnet float  EMC test:  Shock rating: Vibrationrating:  WIRINg Connection types:  ROD-STyLE SENSOR (MODEL EH) Electronic head: Sensor rod: Operating pressure:  Mounting:  Typical mounting torque: Magnet types:  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model EH, Document Part No.: 551250, Revision A 02-11  2  MTS Sensors  E-Series Model EH Sensor Analog/Digital-pulse(Start/Stop)Outputs  Outputs  ANALOG(VOLTAGE/CURRENT)OUTPUTS  Analog outputs include voltage (0 to 10 Vdc forward or reverse acting), and current (4 to 20 mA forward or reverse acting). Since the outputs are direct, no signal conditioning electronics are needed when interfacing with controllers or meters (see  \'Figure 1 \'). Analog output ranges: ·0 to 10 Vdc ·10 to 0 Vdc ·0 to 10 Vdc and 10 to 0 Vdc ·4 to 20 mA ·20 to 4 mA  Temposonics  ®  Active stroke length (Measuring Range) Output value  wa For  rd a  ctin  g  Rev  ers  e ac  ting  E-Series  E  Position magnet  Figure 1. Analog Output signals  DIGITAL(START/STOP)OUTPUTS  The Temposonics E-Series Model EH Start/Stop output sensor requires a start signal from a controller or interface module to initiate the measurement cycle. The sensor generates a stop signal at the end of the measurement cycle that is used to stop the controller \'s counter clock.  Start/Stop  Start signal from controller or interface module + Start - Start  Start Pulse  Input signals to sensor  Start pulse `reflection´ + Stop The elapsed time between the Start and Stop signals - Stop is directly proportional to the magnet \'s position along the active stroke length. The controller can calculate Time between `Start \' and `Stop \' pulses the absolute position of the magnet from the time are proportional to magnet position value and the sensor \'s unique gradient value (inverse of the speed for the sonic pulse traveling in the senFigure 2. Start/Stop output signals (RS-422 differential pairs) sor \'s waveguide). (see  \'Figure 2 \').  Stop pulse  Output signals from sensor  Dual magnet outputs  MEASuREMENT OPTIONS  E-Series sensors provide options for simultaneous multi-position measurements by using more than one magnet per sensor. When using Start/Stop sensor output the ability to process multiple magnets depends on the capability of the controller or interface module that is used. When using analog type outputs (voltage or current) the sensor is limited to a maximum of two magnets. For analog output types the options for single-magnet or dualmagnets is specified in the sensor model number when ordered. For single-magnet sensors the sensor \'s full active stroke length is utilized by the one magnet. For example when using forward-acting outputs, the output is 0% of its value when the magnet is at the null position (start of stroke) and 100% of its value when at the edge of the dead zone (end of stroke), (see `Figure 3 \'). However, for dual-magnet sensors the sensor \'s active stroke length must be shared by the two magnets, and a separation > or = to 75 mm (3 in.) must be maintained between the two magnets (front side of the first magnet to front side of the second magnet). This minimum distance between magnets is needed to maintain proper sensor output. Therefore, for the second magnet the start of stroke (0% output) is set at 75 mm away from the sensor \'s null position. Likewise, for the first magnet the end of stroke (100% output) is now set 75 mm away from the edge of the dead zone (see `Figure 3 \'). The result of using the dual-magnet E-Series options is that the stroke length available for each magnet is 75 mm less (or 3 inches less when specifying stroke length in inches) than the sensor \'s full active stroke length as indicated in the model number.  MTS Sensors  When ordering the single-magnet E-Series sensor the minimum stroke length available is 50 mm or 2 inches. However when ordering dual magnet E-Series sensors the minimum stroke length available is 125 mm (i.e. 50 mm minimum, plus 75 mm for the minimum distance between magnets). Likewise, when specifying stroke length in inches the minimum stroke length available is 5 inches (i.e. 2 inch minimum, plus 3 inches for the minimum distance between magnets).  Single-magnet sensor  Temposonics  ®  Null position start of stroke M1 Active stroke length  End of stroke dead zone M1A  E-Series  E  0 Vdc (0%)  10 Vdc (100%)  75 mm or (3 in.) M2  Dual-magnet sensor  Temposonics  ®  M1  M1A  M2A  E-Series  E  0 Vdc (0%) 0 Vdc (0%)  1st Magnet 2nd Magnet  10 Vdc (100%) 10 Vdc (100%)  Figure3. Single and dual magnet measurements 3  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model EH, Document Part No.: 551250, Revision A 02-11  E-SeriesModelEHSensor,Analog/Digital-pulse(Start/Stop)Outputs Sensor Communications and Dimension References  Communication  SENSOR PARAMETER uPLOAD FEATuRE  For applications using smart sensor interfaces, the Model EH sensor with Start/Stop output (Option R3) comes with the ability to perform sensor parameter uploads. This feature replaces the task of entering sensor data manually, saving time and preventing possible entry errors during start-up or for system maintenance. Note:Start/Stopoutput(optionR3) When the sensor parameter upload feature is not activated the Start/Stop output (Option R3) remains fully compatible with the Start/Stop output (Option R0) used in the previous generation E-Series sensor family. The upload feature supports the following sensor parameters: ·Measuring range ·Offset ·Gradient - (Shown as speed of the sonic-strain pulse (m/s) or inverse speed (s/in.) ·Status ·Manufacturer number The sensor \'s specific parameters can be retrieved by the controller and interface module at any time, via the sensor \'s Start/Stop signal lines. The sensor parameter upload feature requires a customer supplied RS-422 interface. The data format is serial, 4800 Baud, 8-bit data length. Please contact the factory for additional parameter upload protocol details.  Sensor dimension references  Drawings are for reference only, contact applications engineering for tolerance specific information. The model EH sensor shown in `Figure 4 \' can be ordered with flange styles M18 x1.5 or 3/4 -16 UNF-3A and a 7 mm or 10 mm diameter sensor rod. Magnets must be purchased separately; refer to `Standard magnet Selections (Model EH) \' for standard magnet ordering information.  MODEL EH  48 mm (1.9 in.) 34 mm (1.3 in.) dia. 34 mm (1.3 in.) 51 mm (2 in.) Null position, Start of Stroke Stroke Length 50 mm to 2500 mm (or 2 in. to 100 in.) Span position, End of Stroke 63.5 mm (2.5 in.) Dead zone  5-pin or 8-pin  8 mm (0.3 in.)  14 mm (0.6 in.)  Threaded flange M18 x 1.5 or 3/4-16 UNF-3A  Sensor rod 7 mm (0.27 in.) dia. or 10 mm (0.39 in.) dia.  Refer to the model EH sensor ordering information for rod housing and flange types  Figure 4. E-Series model EH sensor dimension reference  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model EH, Document Part No.: 551250, Revision A 02-11  4  MTS Sensors  E-SeriesModelEHSensorAnalog/Digital-pulse(Start/Stop)Outputs Standard Magnet Selections  Standard magnet selections (Model EH)  Magnets must be ordered separately with model EH position sensors. The standard ring magnet (part number 201542-2) is suitable for most applications. POSITION MAgNET SELECTIONS (Magnet must be ordered separately) (Drawing dimensions are for reference only) Magnet and magnet dimensions  4 Holes Each 4.3 mm (0.17 in.) dia. 90° apart on 24 mm (0.94 in.) dia.  Description  Standard ring magnet I.D.: 13.5 mm (0.53 in.) O.D.: 33 mm (1.3 in.) Thickness: 8 mm (0.3 in.) Operating temperature: - 40 °C to +100 °C Ring magnet I.D.: 13.5 mm (0.53 in.) O.D.: 25.4 mm (1 in.) Thickness: 8 mm (0.3 in.) Operating temperature: - 40 °C to +100 °C  60° 2 Holes, Each 4.3 mm (0.17 in.) dia. on 24 mm (0.94 in.) dia. 25 mm (0.97 in.) 21 mm (0.81 in.)  Part number  201542-2  400533  14 mm (0.55 in.)  Open-ring magnet, Style M I.D.: 13.5 mm (0.53 in.) O.D.: 33 mm (1.3 in.) Thickness: 8 mm (0.3 in.) Operating temperature: - 40 °C to +100 °C Magnet spacer (Non-ferrous, use with ring magnet part no.: 201542-2) I.D.: 14 mm (0.56 in.) O.D.: 32 mm (1.25 in.) Thickness: 3.2 mm (0.125 in.) Ring magnet (use with Model EH sensors having a 7mmdia.sensorrod) I.D.: 12 mm (0.47 in.) O.D.: 17.4 mm (0.69 in.) Thickness: 10.5 mm (0.41 in.) Operating temperature: - 40 °C to +100 °C  251416-2  4 Holes Each 4.3 mm (0.17 in.) dia. 90° apart on 24 mm (0.94 in.) dia.  400633  12 mm (0.47 in.) ID 17.4 mm (0.69 in.) OD  253572  MAgNET FLOAT SELECTION (Drawing dimensions are for reference only) Magnet and magnet dimensions  14 mm (0.55 in.) Min. I.D. 53 mm (2.1 in.) Spherical O.D. 53 mm C (2.1 in.) L  Description  Magnet float (Level sensing applications) Specific gravity: 0.70 maximum Pressure: 870 psi maximum Material: 304 SST (This float is used with the Model EH sensors having a 10 mm dia. rod for hydraulic fluid or fresh water applications only)  Part number  3.4 mm (0.13 in.)  251447 Used with collar, part no.: 560777  8 mm (0.31 in.) 4 mm (0.16 in.)  27 mm (1.06 in.) OD  10 mm (0.4 in.) ID 5 mm (0.2 in.)  8-32 threads 9 mm (0.34 in.)  MTS Sensors  Collar (use with Model EH sensors having 10 mm dia. sensor rod) Material: 304 SST Provides end of stroke stops for magnet float (part no.: 251447)  560777  5  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model EH, Document Part No.: 551250, Revision A 02-11  E-SeriesModelEHSensor,Analog/Digital-pulse(Start/Stop)Outputs Mounting Reference, Connections and Wiring  Model EH Rod-Style sensor mounting  MODEL EH SENSOR MOuNTINg The model EH sensor is designed for direct stroke measurement inside prepared hydraulic cylinders. At the head of the sensor, a threaded flange and O-Ring provides for mounting and sealing the sensor into a port opening in the cylinder end cap. The sensor \'s pressure resistant rod fits into a bore drilled through the center of the piston head and rod assembly. The sensor \'s position magnet is mounted on the top of the piston head or installed in a shallow counter-bore inside the piston head. The position magnet requires minimum distances away from ferrous metals to allow proper sensor output. The minimum distance from the front of the magnet to the cylinder end cap is 15 mm (0.6 in.). The minimum distance from the back of the magnet to the piston head is 3.2 mm (0.125 in.). However, a minimum distacnce of at least 5 mm (0.197 in.) is preferred. The non-ferrous spacer (part no. 400633), provides this minimum distance when used along with the standard ring magnet (part no. 201542-2), as shown in `Figure 5 \'. The magnet is usually secured using non-ferrous fastening material (customer supplied). Screws must be made of nonmagnetic stainless steel or brass. In the event that a ferrous circlip or retaining ring will be used to secure the magnet in a counter-bore then an additional non-ferrous spacer (> or = 3.2 mm) must be placed between the circlip or retaining ring and the front side of the magnet. The cylinder \'s design ratings for hydraulic pressure and piston velocity will determine the appropriate size for the bore that is drilled through the center of the piston head and rod assembly. The recommended minimum size for this bore is 10 mm (0.39 in.) when using the 7 mm (0.27 in.) diameter sensor rod. Likewise, the recommended minimum size of 13 mm (0.51 in.) should be used when installing the 10 mm diameter sensor rod. Some applications using long sensor rods may benefit by adding a bushing (e.g. made of flourelastomer material) to prevent wear on the magnet and sensor rod (customer supplied).  Cylinder end cap  m Te po so cs ni  ®  > 15 mm .) (0.6 in.)  Min. 3.2 mm (0.125 in.)  Connections and wiring (Model EH)  Figure 5. Model EH rod-style mounting  SENSORINTEGRALCONNECTOR(D34ANDD84)PINOUT/wIRECOLORCODES  The E-Series Model EH sensor connects directly to a controller or interface module with the standard male, 5-pin or 8-pin integral connector and an extension cable as described in `Table 1 \' and `Table 2 \'.  2 3 5 1 4  IntegralD34connector(male)asviewed from the end of the sensor Extension cable wire color Brown White Blue Black Gray Signal/function Analog outputs +24 Vdc Output signal DC ground (for power return) 2nd Output signal (optional) Ground for signal return  2 1 3 8 7 4 6 5  S E-  er  ies  E  m Ring magnet Piston head  N ferrous Non f space spacer  IntegralD84connector(male)asviewed from the end of the sensor Extension cable wire color White Brown Green Yellow Gray Pink Blue Red Signal/function Start/Stopoutputs (+) Start (-) Start (+) Stop (-) Stop No connection No connection +24 Vdc DC Ground (0 Vdc) for power return  Pin no. 1 2 3 4 5  Pin no. 1 2 3 4 5 6 7 8  Table 1. Integral D34 sensor connector (mates with cable connectors 370618 and 370619)  Table 2. Integral D84 sensor connector (mates with cable connectors 370671 and 370672)  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model EH, Document Part No.: 551250, Revision A 02-11  6  MTS Sensors  E-SeriesModelEHSensor,Analog/Digital-pulse(Start/Stop)Outputs CableConnectorOptions(D34andD84)  MATINGCABLECONNECTOROPTIONSFOR(D34)CONNECTORTyPES (Photo and drawing dimensions are for reference only) Connector and dimensions Description  Female cable connector, straight exit (Field installable) 5-Pin (D34) Mates with standard male (M12) integral connector Termination: Screw terminals Cable gland: PG9for6-8mmdia.cable Ingress protection: IP67 Female cable connector, 90° exit (Field installable) 5-Pin (D34) Mates with standard male (M12) integral connector Termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67  Part number  52 mm (2.0 in.) 20 mm (0.8 in.) dia.  370618  35 mm (1.4 in.) 20 mm (0.8 in.) dia. 40 mm (1.6 in.)  370619  MATINGCABLECONNECTOROPTIONSFOR(D84)CONNECTORTyPES (Photo and drawing dimensions are for reference only) Connector and dimensions Description  Female cable connector, straight exit (Field installable) 8-Pin (D84) Mates with standard male (M12) integral connector Termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67 Female cable connector, 90° exit (Field installable) 8-Pin (D84) Mates with standard male (M12) integral connector Termination: Screw terminals Cable gland: PG9 for 6-8 mm dia. cable Ingress protection: IP67  Part number  52 mm (2.0 in.) 20 mm (0.8 in.) dia.  370671  35 mm (1.4 in.) 20 mm (0.8 in.) dia. 40 mm (1.6 in.)  370672  MTS Sensors  7  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model EH, Document Part No.: 551250, Revision A 02-11  E-SeriesModelEHSensor,Analog/Digital-pulse(Start/Stop)Outputs (M12) Cord Sets and (M16) Adapter Cable Options  M12 CORD SETS AND (M16) ADAPTER CABLE OPTIONS (Photo and drawing dimensions are for reference only) Cord set and dimensions Description Part number  M12 Cord set, female connector, Straight exit 5-Pin (M12) mates with standard male (D34) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370673  15 mm (0.59 in.) dia. M12 x 1  26.5 mm (1.04 in.)  (Image not available)  8.8 mm (0.35 in.) dia. 11.6 mm (0.46 in.) dia. 12 mm (0.47 in.)  31.5 mm (1.24 in.)  M12 Cord set, female connector 90° exit 5-Pin (M12) mates with standard male (D34) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370675  M12 Cord set, female connector, straight exit 8-Pin (M12) mates with standard male (D84) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370674  15 mm (0.59 in.) dia. M12 x 1  26.5 mm (1.04 in.)  (Image not available)  8.8 mm (0.35 in.) dia. 11.6 mm (0.46 in.) dia. 12 mm (0.47 in.)  31.5 mm (1.24 in.)  M12 Cord set, Female, Connector 90° Exit 8-Pin (M12) mates with standard male (D84) integral connector Ingress protection: IP67 Cable: 5 m, PUR jacket, shielded, pigtail end  370676  Adapter cable and dimensions  Description  Adapter cable 5-Pin female (M12) connector, straight exit to 6-pin male D60 (M16) connector, straight exit Ingress protection: IP67 Adapter cable 8-Pin female (M12) connector, straight exit to 6-pin male D60 (M16) connector, straight exit Ingress protection: IP67  Part number  (Image not available)  254206  (Image not available)  254207  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model EH, Document Part No.: 551250, Revision A 02-11  8  MTS Sensors  E-SeriesModelEHSensor,Analog/Digital-pulse(Start/Stop)Outputs Ordering Information  Use the order matrix below to configure your Model EH sensor order number.  E  1  H  2 3 4 5 6 7 8  D  9 10 11  1  12 13 14 15  SENSOR MODEL EH K M L S = E-Series model EH rod-style sensor (Magnet(s) must be ordered separately) ROD HOuSINg AND FLANgE TyPE = = = = Flange M18 x 1.5 / Rod 7 mm dia. Flange M18 x 1.5 / Rod 10 mm dia. Flange 3/4 in. UNF / Rod 7 mm dia. Flange 3/4 in. UNF / Rod 10 mm dia. STROKE LENgTH -------- ------.-- =  =  E H  =  1-2 3  4-8  M = Millimeters (Encode in 5, 10, 25 or 50 mm increments) as indicated in `Stroke length notes \' below. u = Inches (Encode in 0.2, 0.4, 1 or 2 in. increments) as indicated in `Stroke length notes \' below.  Stroke length Notes: Stroke length ranges: M = 50 mm to 2500 mm u = 2 in. to 100 in. The increment size between standard stroke lengths vary as shown below:  Stroke length (mm) Ordering increment   500 mm > 500 mm and  750 mm > 750 mm and  1000 mm > 1000 mm and  2500 mm  Stroke length (IN)  5 mm 10 mm 25 mm 50 mm  Ordering increment   20 in. > 20 in. and  30 in. > 30 in. and  40 in. > 40 in. and  100 in. SENSOR CONNECTION TyPES D34 D84 1 = 5-Pin (M12), male (Analog output) = 8-Pin (M12), male (Start/Stop output) INPUTVOLTAGE = + 24 Vdc (+20%, -15%), standard OuTPuT  VOLTAGE  0.2 in. 0.5 in. 1 in. 2 in. =  D  9 - 11  = =  1  12 13-15  V01 V11 V02 V12 V03 A01 A11 A02 A12 R3  = 0 to 10 Vdc (1 output channel with 1 magnet) = 10 to 0 Vdc (1 output channel with 1 magnet) = 0 to 10 Vdc (2 output channels with 2 magnets) Refer to  \'Dual magnet outputs \' for more information. = 10 to 0 Vdc (2 output channels with 2 magnets) Refer to Refer to  \'Dual magnet outputs \' for more information. = 0 to 10 Vdc and 10 to 0 Vdc (2 output channels with 1 magnet)  CuRRENT  = 4 to 20 mA (1 output channel with 1 magnet) = 20 to 4 mA (1 output channel with 1 magnet) = 4 to 20 mA (2 output channels with 2 magnets) Refer to  \'Dual magnet outputs \' for more information. = 20 to 4 mA (2 output channels with 2 magnets) Refer to  \'Dual magnet outputs \' for more information.  START/STOP  = Start/Stop with sensor parameters upload function Start/Stop output (Option R3) is fully compatible with the Start/Stop output (Option R0) used in the previous generation E-Series sensors.  MTS Sensors  9  Temposonics® Linear-Position Sensors - Product Data Sheet E-Series, Model EH, Document Part No.: 551250, Revision A 02-11  Document Part Number: 551250, Revision A 02-11 MTS and Temposonics are registered trademarks of MTS Systems Corporation. All other trademarks are the property of their respective owners. Printed in USA. Copyright © 2011 MTS Systems Corporation. All Rights Reserved in all media.  MTS Systems Corporation Sensors Division  ®  MTS Sensor Technologie gmbH & Co. Kg Auf dem Schüffel 9 D - 58513 Lüdenscheid, Germany Tel.: +49-2351-9587-0 Fax: +49-2351-56491 e-mail: info@mtssensor.de http://www.mtssensor.de  MTS Sensors Technology Corporation 737 Aihara-cho, Machida-shi Tokyo 194-0211, Japan Tel.: +81-42-775-3838 Fax: +81-42-775-5516 e-mail: info@mtssensor.co.jp http://www.mtssensor.co.jp  SENSORS  3001 Sheldon Drive Cary, North Carolina 27513, USA Tel.: +1-800-633-7609 Fax: +1-919-677-2343 +1-800-498-4442 e-mail: sensorsinfo@mts.com http://www.mtssensors.com  ",3267);arrFiles[111]=new Array(112,"HTML/Credit-Application.pdf","2 Jun 2009","Credit Application.qxd","","","WEST COAST PLASTICS EQUIPMENT, INC.  6122 W. Washington Blvd., Culver City, CA 90232 Tel: (323) 870-7733 Fax: (310) 837-4947 Email: info@westcoastplastics.com  Credit Application  Corporation _________ Partnership ___________ Proprietorship ________ Subsidiary ___________ Name of Parent Co. ________________________ Date Established __________________________ Number of Employees ______________________ Main Business Activity ______________________ _________________________________________ Website __________________________________ Duns Number _____________________________ D & B Rating _____________________________ SIC Code __________ NAICS Code ___________ Seller \'s Permit # ___________________________ Bank Information Bank Name _______________________________ Address _________________________________  Business Name __________________________________________________ Billing Address ___________________________________________________ City ________________________________ State _______ Zip ____________ Telephone _______________________ Fax ____________________________ Email ___________________________________________________________ Shipping Address _________________________________________________ City ________________________________ State _______ Zip ____________ Owners & Officers Name _________________________________ Title _____________________ Name _________________________________ Title _____________________ Name _________________________________ Title _____________________ Trade References Name _________________________________ Phone ___________________ Address _________________________________________________________ City ________________________________ State _______ Zip ____________ Name _________________________________ Phone ___________________ Address _________________________________________________________ City ________________________________ State _______ Zip ____________ Name _________________________________ Phone ___________________ Address _________________________________________________________ City ________________________________ State _______ Zip ____________ Name _________________________________ Phone ___________________ Address _________________________________________________________ City ________________________________ State _______ Zip ____________ Name _________________________________ Phone ___________________ Address _________________________________________________________ City ________________________________ State _______ Zip ____________  City _______________ State _____ Zip ________ Phone ___________________________________ Account # ________________________________ Accounts Payable Dept. Contact Name _____________________________ Telephone ________________________________ Credit Requested __________________________  Confirmation of Information Accuracy and Release of Authority to Verify I hereby certify that the information in this credit application is correct. The information included in this credit application is for use by West Coast Plastics Equipment, Inc. in determining the amount and conditions of credit to be extended. Further, I hereby authorize the bank and trade references listed in this credit application to release the information necessary to assist West Coast Plastics Equipment, Inc. in establishing a line of credit. Signature _________________________________________________ Title ____________________ Date _____________________ Policy Statement: Terms are Net 30 Days from date of invoice unless otherwise stated. All orders are shipped F.O.B. shipping point unless otherwise stated.  ",47);arrFiles[112]=new Array(113,"HTML/MTS-EP2-Digital.pdf","19 Aug 2009","Unknown","","","Temposonics®  Magnetostrictive Linear-Position Sensors  E-Series EP2, Digital Pulse Output (Start/Stop)  551064 B  R  SENSORS  Product Specification  Model EP2 Profile-Style Sensor single-position measurement Model EP2 Profile-Style Sensor multi-position measurement  I I I I I I I I I I  Linear, absolute measurement Non-contact sensing technology Non-linearity less than 0.02% Repeatability within 0.001% Digital position output: Start/Stop pulse Simple sensor parameter upload Simultaneous multi-position measurement EMI shielded and CE certified Measuring range from 4 to 60 inches One year warranty  E-Series position sensor  There is a new standard of excellence in position sensing. The Temposonics EP2 sensor establishes new performance standards for low-cost, fullyindustrial, durable position sensors using the widely preferred magnetostrictive technology. This principle for accurate and non-contact measurement of linear-position sensing was developed 30 years ago by MTS and is used with outstanding success in a large variety of industrial applications. Industrial applications include harsh environmental conditions such as presses, injection molding, tire presses, rolling plants, tunnel driving machines and hydraulic units.  The benefits of magnetostrictive sensing  Temposonics linear-position sensors use the time-based magnetostrictive position sensing principle developed by MTS. Within the sensing element, a sonic strain pulse is induced in a specially designed magnetostrictive waveguide by the momentary interaction of two magnetic fields. One field comes from a movable permanent magnet that passes along the outside of the sensor. The other field comes from an  interrogation  current pulse applied along the waveguide. The resulting strain pulse travels at ultrasonic speed along the waveguide and is detected at the head of the sensing element. The position of the magnet is determined with high precision and speed by accurately measuring the elapsed time between the application of the interrogation pulse and the arrival of the resulting strain pulse with a high speed counter. Using the elapsed time to determine position of the permanent magnet provides an absolute position reading that never needs recalibration or re-homing after a power loss. Non-contact sensing eliminates wear, and guarantees the best durability and output repeatability.  All specifications are subject to change. Please contact MTS for specifications that are critical to your needs.  Temposonics Model EP2 linear-position sensor parameters  Output Digital-pulse output for the EP2 sensor is Start/Stop. Here the sensor requires a start signal from a controller or interface card to initiate the measurement cycle. The sensor generates a stop signal at the end of the measurement cycle that is used to stop the controller \'s counter clock. The elapsed time between the Start and Stop signals is directly proportional to the magnet \'s position along the active stroke length. The controller can calculate the absolute position of the magnet from the time value and the sensor \'s unique gradient value, (inverse of the speed for the ultrasonic pulse traveling in the sensor \'s waveguide). Parameters Measured variable: Resolution: Non-linearity: Repeatability: Outputs: Specification Displacement, single-position measurement or multi-position measurement 0.1, 0.01, 0.005 mm (controller dependent) < ± 0.02% full scale , minimum ± 60 µm < ± 0.001% full scale Start/Stop: RS-422 differential signal (serial parameter upload available for: measuring range, offset, gradient and status) Controller dependent 4, 6, 9, 12, 15, 18, 21, 24, 30, 36, 42, 48, 54, 60 in. Temperature: - 40 to 75 °C (- 40 to +167 °F) Relative humidity: 90% no condensation Ingress protection: IP67 if mating cable connector is correctly fitted. Shock test: 50 g (single hit) IEC-Standard 68-2-27 Vibration rating: 5 g/10 - 2000 Hz IEC-Standard 68-2-6 Electromagnetic emission: EN 50081-1 Electromagnetic immunity: EN 50082-2 EN 61000-4-2/3/4/6 Criteria A, CE qualified + 24 Vdc nominal (-15% or +20%) Polarity protection: up to -30 Vdc Overvoltage protection: up to 36 Vdc Current drain: Start/Stop, 50 - 100 mA (stroke length dependent) Dielectric withstand voltage: 500 Vdc (DC ground to machine ground) 6-pin male D60 connector Aluminum Adjustable mounting feet Block magnet with stamped metal carrier  Update frequency: Measuring ranges: Operating conditions:  START/STOP  Start Pulse + Start Input signals - Start to sensor  Start Pulse  reflection   Stop Pulse  EMC test:  + Stop Output signals - Stop from sensor  Operating voltage:  Time between Start and Stop pulses is proportional to magnet position  Sensor parameter upload For applications using smart sensor interfaces, the Model EP2 digital-pulse output sensor can provide a sensor parameter upload ability. This feature can replace the manual task of entering sensor data for system start-up, or for system maintenance work, saving time and preventing possible entry errors. The following sensor parameters are available for upload: - Measuring range - Offset - Gradient (Inverse speed of sensing pulse) - Status These sensor specific parameters can be retrieved by the controller/interface card at any time, via the sensor \'s Start/Stop signal lines. The sensor parameter upload feature requires a RS-485 / 422 interface, The data format is serial, 4800 Baud, 8-bit data length. (Please consult factory for further details on parameter upload protocol.) Multi-position measurements The Model EP2 digital-pulse output sensor can provide multi-position measurements when used with more than one position magnet, and an appropriate controller/interface card. The minimum allowed distance between magnets is 3.0 in. (76 mm) to maintain proper sensor output. The total number of magnets is limited by the EP2 stroke length, and the particular interface card/controller that is used.  Connection type: Sensor extrusion: Mounting: Magnet type:  2  MTS Sensors Product Specification 551064 B  Temposonics Model EP2 linear-position sensor  Dimensions  31 mm Max gap 3 mm ( + 2 mm) (1.22 in.) (0.12 + .08 in.) 19.5 mm (0.77 in.) 3 mm (0.12 in.)  Beginning of stroke - Null position 6 pin DIN connector 11 mm (0.43 in.) M4 or #8 Screw Mounting plate Magnet 14 mm (0.55 in.)  25 mm (0.98 in.)  14.5 mm (0.57 in.) 58 mm (2.3 in.) Null 72.5 mm (2.85 in.) Stroke length Dead zone 72.5 mm (2.85 in.)  2 mm (0.08 in.) 5 mm (0.21 in.)  27 mm 36 mm (1.1 in.) (1.42 in.)  Measurement stroke lengths: 4, 6, 9, 12, 15, 18, 21, 24, 30, 36, 42, 48, 54, 60 in. (only)  Wiring and connectors Sensor integral connector (D60 Male)  Pinout/wire color code (for extension cable)  Pin no. 1 2 3 4 5 6 Wire color Gray Pink Yellow Green Red or Brown White Function Digital-pulse outputs (-) Stop (+) Stop (+) Start (-) Start +24 Vdc (+20%, -15%) DC Ground (for supply)  Cable connectors (field-installed D6 female) Mates with sensor \'s integral connector  D6 Straight-exit connector part no. 560700  54 mm (2.1 in.) 18 mm (0.7 in.)  Integral D6 connector (male) as viewed from end of sensor  D6 90º connector part no. 560778  S  4 5  3 6  2 1  37 mm (1.5 in)  Note: Appropriate grounding of cable shield is required at the controller end. Attention: A grounding lug is provided near the connector end of the sensor for a convenient connection to earth ground. Since the EP2 sensor \'s aluminum housing has an anodic coating the sensor mounting feet, (part no. 400802), do not provide proper grounding. A ground wire connection to the grounding lug is required.  54 mm (2.1 in.)  3  MTS Sensors Product Specification 551064 B  Temposonics Model EP2 linear-position sensor  Sensor mounting The sensor is fixed onto a flat straight surface of the machine with moveable mounting feet. A pair (2) mounting feet are provided with each sensor. Additional mounting feet are provided for measurement stroke ranges greater than 48 inches. These mounting feet slide onto the sensor via channels in the extrusion and should be evenly distributed along its length. Refer to the drawing on page 3. When fastening the mounting feet, 10-32 cap screws are recommended at a maximum torque of (44 in. lbs.).  Mounting foot Standard mounting foot part no. 400802  0.213 in. dia. through 4 holes 1.9 mm (0.075 in.) 50 mm (1.97 in.) 68 mm (2.68 in) Width = 14.5 mm (0.57 in.) 304 SST 27.9 mm (1.1 in.) 9.1 mm (0.36 in.) 9.1 mm (0.36 in.)  Position magnet The floating magnet (block style L) mounts on the moving machine part and travels just above the sensor \'s extrusion. It can be mounted using ferrous metal screws and support bracket. However, the support bracket can not extend beyond 11 mm (0.43 in.)from the top of the magnet, unless it is made of non-ferrous material. The magnet should be installed with a perpendicular orientation relative to the top surface of the sensor extrusion as shown on page 3. Optimal performance is achieved when this orientation remains consistent throughout the full measurement stroke range.  Block magnet, style L part no. 252887  19.5 mm (0.77 in.) 11 mm (0.43 in.) 31 mm (1.22 in.) 13.5 mm (0.53 in.) 6 mm (0.24 in.) 20 mm (0.79 in.)  O 4.3 mm (0.17 in.)  How to order The EP2 sensor model With an integral 6-pin connector, digital pulse output (Start/Stop) Notes: Temposonics Model EP2 sensors include one magnet (part no. 252887), and two mounting feet (part numEP2D - _ _ _ ber 400802) for sensors up to 48 inches of stroke Measuring stroke length (inches) length. Additional mounting feet are included for stroke 004 / 006 / 009 / 012 / 015 / 018 / 021 / 024 / 030 / 036 / 042 / 048 / 054 / 060 lengths over 48 inches.  Accessories Description Function/Notes Mounting feet, standard (spares) Model EP2 sensors come with mounting feet Block style magnet (spare) Style L  floating  magnet (included with EP2 sensors) 6-Pin DIN connector, straight Female, straight exit, mates to D60 connection type (see page 3). 6-Pin DIN connector, 90° Female, 90° exit, mates to D60 connection type (see page 3). Part no. 400802 252887 560700 560778  Part Number: 05-06 551064 Revision B MTS and Temposonics are registered trademarks of MTS Systems Corporation. All other trademarks are the property of their respective owners. All Temposonics sensors are covered by US patent number 5,545,984. Additional patents are pending. Printed in USA. Copyright © 2006 MTS Systems Corporation. All Rights Reserved.  UNITED STATES  R  GERMANY  MTS Sensor Technologie GmbH & Co. KG Auf dem Schüffel 9 D - 58513 Lüdenscheid Tel: +49 / 23 51 / 95 87-0 Fax: +49 / 23 51 / 56 491 www.mtssensor.de info@mtssensor.de  JAPAN  MTS Sensors Technology Corporation Ushikubo Bldg. 737 Aihara-cho, Machida-shi Tokyo 194-0211, Japan Tel: + 81 (42) 775 / 3838 Fax:+ 81 (42) 775 / 5516 www.mtssensor.co.jp info@mtssensor.co.jp  SENSORS  MTS Systems Corporation Sensors Division 3001 Sheldon Drive Cary, NC 27513 Tel: (800) 633-7609 Fax: (919) 677-0200 (800) 498-4442 www.mtssensors.com sensorsinfo@mts.com  ",168);arrFiles[113]=new Array(114,"HTML/Fenwal-Thermoswitch-Datasheet.pdf","13 Jul 2009","DS 1 10 21.qxp","","","SERIES 15000, 16000, 17000 and 18000  THERMOSWITCH® Temperature Controllers FEATURES  · · · · Fast response Close control Extreme sensitivity Vibration resistance  ®  1.10.21  APPLICATIONS  · · · · · · · · Hydraulic Laminating Presses Livestock Watering Fountains Label Adhesive Applications Paint Drying Equipment Hot Stamp Printers Vending Machines Deep Fat Fryers Textile Platens  DESCRIPTION  THERMOSWITCH® controllers control temperatures as low as -100ºF (-73ºC) and as high as 1100ºF (593ºC) with the proven dependability of over 65 years of service to satisfied customers.  PRINCIPAL OF OPERATION  The THERMOSWITCH® controller is a strut-and-tube type thermostat comprised of two basic parts: the outer shell, made of high-expanding metal and the strut assembly, made of low-expanding metal. A pair of electrical contacts is mounted on the strut assembly and installed in the shell under tension or compression. Since each end of the strut assembly is mechanically connected to the ends of the shell, a net change of force is produced on the strut assembly as the shell expands or contracts with changing temperature. The temperature at which the contacts  make  or  break  can be regulated by a temperature adjusting sleeve. This adaptation of the differential-expansion principle gives several important control advantages:  `to  lead  the struts by an interval that varies with the rate  of temperature change. With rapid temperature rise, the shell exerts a larger net force on the struts and tends to pull them apart sooner than if the temperature were rising slowly. The result is several degrees or more of anticipation which helps produce closer control.  ·  Extreme Sensitivity  The strut and contact assembly operates by slow make and break. This means that every temperature change, no matter how small, causes a corresponding change in the space between the electrical contacts. Therefore, contact action can be produced by a very small temperature change, which accounts for the THERMOSWITCH® controller \'s excellent resolution sensitivity of 0.1ºF (0.05ºC).  ·  Fast Response  ·  Vibration Resistance  Since the outer shell of the THERMOSWITCH® is the active sensing member, and not merely a housing, response to temperature change is almost instantaneous.  Since the strut assembly is assembled under tension or compression, a properly installed unit has excellent vibration resistance and will provide the best possible control under difficult physical conditions.  ·  Close Control  The controller \'s shell and strut arrangement has  anticipation  characteristics which substantially reduce the amount of overshoot and undershoot during conditions of rapid temperature change. Anticipation is produced by an inherent time lag between the shell and struts, which causes the shell  · Agency Approved Various models are listed or component recognized by Underwriters Laboratories (UL) and certified by the Canadian Standards Association (CSA).  www.fenwalcontrols.com  1-800-FENWAL-1  THERMOSWITCH®, Probe Type Temperature Controller  Page 1  THERMOSWITCH® Controllers  THERMOSWITCH UNIT TYPE DIMENSIONS DESCRIPTION CATALOG NUMBER  The basic element of all THERMOSWITCH® controllers. Has all the desirable features of the ideal thermostat - high sensitivity, wide adjustment range, small size, rugged construction, vibration resistance, and low cost. The unit can be inserted into a .625 in (15.88 mm) reamed hole. Approximate weight is 2.5 ounces (70 grams).  01-017000-000 01-017021-000 01-017002-000 01-017023-000  01-017100-000 Has all the features of the Cartridge Type plus the addition of a pipe thread for mounting. Approximate weight is 5 ounces (140 grams). 01-017121-000 01-017102-000 01-017123-000 01-017200-000 01-017221-000 01-017202-000 01-017223-000  This unit has the same mounting as the Cartridge Type but is designed so modificatons may be included. It also can be inserted into a .625 in (15.88 mm) reamed hole. Approximate weight is 3 ounces (84 grams).  01-017300-000 Has all the features of the Block Head Type except a mounting flange has been provided. Approximate weight is 4 ounces (112 grams). 01-017321-000 01-017302-000 01-017323-000 01-017800-000 01-017821-000 01-017802-000 01-017823-000  Has electric conduit junction box containing terminal block and temperature adjusting dial and knob. Extended hexagonal section with pipe thread permits easy mounting into tapped hole of boss, immersing shell into fluid medium to be controlled.  The Coupling Head Type has a hexagonal mounting section withpipe threads at each end. This unit may be directly attached to electrical conduit. Approximate weight is 5 ounces (140 grams).  01-018000-000 01-018021-000 01-018002-000 01-018023-000  inch (mm)  Page 2 THERMOSWITCH®, Probe Type Temperature Controller 1-800-FENWAL-1  = Normally Stocked  www.fenwalcontrols.com  -100 to 600ºF/-73 to 316ºC  TEMP. RANGE  SHELL CONTACT AND OPERATION HEAD ON TEMP. MATERIAL RISE APPROX. DEGREES CHANGE PER FULL TURN OF ADJUSTING SLEEVE EXTREME CURRENT TEMPERATURE RATING EXPOSURE FACTORY TEMP. SETTING TOLERANCE (MOD. #3)  APPLICABLE MODIFICATIONS APPLICABLE SPECIAL FEATURES  (see Modifications and Special Features Section)  -100 to +400ºF -73 to +204ºC  Opens Brass Closes  90ºF/50ºC 80ºF/45ºC 300 Series S.S. Shell 110ºF/60ºC 100ºF/55ºC 80ºF/45ºC Brass 75ºF/40ºC 300 Series S.S. Shell Brass Head 100ºF/55ºC 90ºF/50ºC 80ºF/45ºC 70ºF/40ºC 300 Series S.S. Shell Brass Head 100ºF/55ºC 90ºF/50ºC 80ºF/45ºC Brass 70ºF/40ºC 300 Series S.S. Shell Brass Head 100ºF/55ºC 90ºF/50ºC 125ºF/70ºC 75ºF/40ºC 300 Series S.S. Shell Brass Head 160ºF/90ºC 90ºF/50ºC 80ºF/45ºC 75ºF/40ºC 300 Series S.S. Shell Brass Head 100ºF/55ºC 90ºF/50ºC  -100 to +600ºF -73 to +316ºC  Opens Closes Opens Closes  Unless otherwise specified, all ratings apply to non-inductive loads such as heaters or resistors. Tungsten filament lamps have an inrush 10 to 15 times the steady state current. Do not exceed ratings.  UNITS THAT OPEN ON TEMPERATURE RISE: -100ºF/-73ºC indefinitely and 100ºF/55ºC above set point for one hour maximum UNITS THAT OPEN ON TEMPERATURE RISE  1 2 3 4 14  31 34 35  -100 to +400ºF -73 to +204ºC  1 thru 14, 27  -100 to+600ºF -73 to +316ºC  Opens Closes Opens Closes  31 34 35  -100 to +400ºF -73 to +204ºC  Brass  -100 to +600ºF -73 to +316ºC -100 to +400ºF -73 to +204ºC  Opens Closes Opens Closes  UNITS THAT CLOSE ON TEMPERATURE RISE:  -100º to +400ºF/ -73º to +204ºC -100ºF/-73ºC indefinitely and 500ºF /260ºC for one hour maximum  AC 10 amps 120 volts 5 amps 240 volts (noninductive) DC ratings consult Fenwal  *  + 5ºF from +32º to +100ºF +3ºF or 2% of Setting Value (whichever is greater) From 100º to 600ºF  1 thru 14, 27  31 34  -100 to +600ºF -73 to +316ºC -100 to +400ºF -73 to +204ºC  Opens Closes Opens Closes  Brass  -100º to +600ºF/ -73º to +316ºC -100ºF/-73ºC indefinitely and 700ºF /370ºC for one hour maximum  UNITS THAT CLOSE ON TEMPERATURE RISE  1 thru 14, 27  31 34  -100 to +600ºF -73 to +316ºC  Opens Closes Opens Closes  + 5ºF or 3% of Setting Value (whichever is greater)  1 3  31 34  TEMPERATURE OFFSET VALUES DUE TO PRESSURE (APPROX. ONLY)  -100 to +400ºF -73 to +204ºC  Brass  -100 to +600ºF -73 to +316ºC  Opens Closes  Pressure PSI 100 200 300 400 500  Set Point Offset + 3ºF / 2ºC + 6ºF / 3ºC + 9ºF / 5ºC + 12ºF / 7ºC + 15ºF / 8ºC  Collapsing pressure (brass shell) 1400 psi at room temperature Collapsing pressure (S.S. shell) 3,500 psi at room temperature  1 2 3 4 14 27  31 34 35  Recognized under the Components Program of Underwriters Laboratories, Inc. (XAPX2) Underwriters Laboratories Listed (XAPX) Certified by Canadian Standards Association (Class 4813 02) CSA File No. LR7378  * UL and CSA units rated for AC operation only.  THERMOSWITCH®, Probe Type Temperature Controller Page 3  www.fenwalcontrols.com  1-800-FENWAL-1  HIGH TEMPERATURE Controller  THERMOSWITCH UNIT TYPE  DIMENSIONS  DESCRIPTION  CATALOG NUMBER  Armored cable is standardly available in lengths of 12 in (30 cm). A high expansion stainless steel element is inserted into the medium to be controlled, while the low expansion stainless steel sheath remains exposed to ambient temperature. Approximate weight is 1 pound (336 grams) A high expansion stainless steel element is inserted into the medium to be controlled, while the low expansion stainless steel sheath remains exposed to ambient temperature. Approximate weight is 1 pound (336 grams)  01-015050-000  01-016050-000 01-016051-000  CORROSION RESISTANT Controller  01-180020-029  This model has a hexagonal mounting section with male pipe threads at each end. This unit may be directly attached to electrical conduits or explosion proof fittings. It is ideally suited for photo processing, laboratory and experimental test work, food processing, bleaching & dyeing and many other similar applications. Approximate weight is 5 ounces (140 grams).  01-018002-021  01-018023-007  = Normally Stocked  APPLICATION HINTS - Contact Protection  Capacitors are not needed under average conditions. For smoother control of small loads (below 1/10th the controller rating or to prevent contact bounce due to vibration use capacitance in µF) of 0.28 divided by line voltage.  NOTE: Capacitors should be rated a minimum of 600 volts for 120 volt circuits and a minimum of 1000 volts for 240 volt circuit.  VOLTAGE 120 VAC 240 VAC 120 or 240 VAC 15 to 25 VAC 120 or 240 VAC  SERVICE Resistance Resistance Relays Relays Motors  CAPACITANCE (µF) None Required 0.1 0.001 to 0.01 0.02 Use Relay  NOTE: Capacitors should be wired in parallel with thermostat leads. For exceptional vibration, increase above values 5 to 10 times.  Page 4  THERMOSWITCH®, Probe Type Temperature Controller  1-800-FENWAL-1  www.fenwalcontrols.com  200 to 1500ºF/93 to 816ºC  TEMP. RANGE  CONTACT SHELL OPERATION AND HEAD ON TEMP. MATERIAL RISE APPROX. DEGREES CHANGE PER FULL TURN OF ADJUSTING SLEEVE EXTREME CURRENT TEMPERATURE RATING EXPOSURE  FACTORY TEMPERATURE SETTING TOLERANCE (MOD. #3)  APPLICABLE MODIFICATIONS AND SPECIAL FEATURES  (see Modifications and Special Features Section)  300 to 1100ºF/ 149 to 593ºC  Opens  S.S. Shell Brass Head 165ºF / 90ºC  -100ºF/-73ºC indefinitely and 100ºF/55ºC above set point for 1/2 hour maximum  AC 25 amps 120 volts 12.5 amps 240 volts DC ratings consult Fenwal  Opens 300 to 1100ºF 149 to 593ºC Closes All S.S.  Ambient temperature surrounding switch shell should not exceed 600ºF/315ºC  + 4% of setting  1 2 3 5 11 12 13 NOTE: Mod. 4 is standard with this unit 1 2 3 14 NOTE: Mod. 4 is standard with this unit  -100 to 600ºF/-93 to 316ºC  -100 to +500ºF/ -73 to 260ºC Opens AC 10 amps 120 volts 5 amps 240 volts DC ratings consult Fenwal + 5ºF from -100 to 100ºF + 3ºF or 2% of setting value (whichever is greater) from 100 to 600ºF + 5ºF or 3% of setting value (whichever is greater)  All Type 316 S.S.  100ºF/ 55ºC  -100ºF/-73ºC indefinitely and 100ºF/55ºC above set point for 1 hour maximum  -100 to +600ºF -73 to +316ºC  Closes  -100ºF/-73ºC indefinitely and 700ºF/370ºC for 1 hour maximum  1 2 3 4 14 SPECIAL FEATURE 31  RATINGS  Unless otherwise specified, all rating apply to non-inductive loads, such as heaters or resistors. Tungsten filament lamps have an inrush of 10 to 15 times the steady state current. Do not exceed switch rating at any time.  www.fenwalcontrols.com  1-800-FENWAL-1  THERMOSWITCH®, Probe Type Temperature Controller  Page 5  PROTECTIVE WELLS  For use with 170XX 5/8  Diameter Cartridge THERMOSWITCH Controllers  Catalog No. 34-011201-000 Hex Head Well (321 Stainless Steel Well & Head) Applicable Modifications 1 Special Marking Applicable Special Features 31A Extended Shell Approximate weight is 4 ounces (112 grams) Pressure Ratings: 100 psi at -100ºF to +250ºF 60psi at 600ºF Catalog No. 34-011204-000 Coupling Head Well (321 Stainless Steel Well & Head) Applicable Modifications 1 Special Marking Applicable Special Features 31A Extended Shell Approximate weight is 5 ounces (140 grams) Pressure Ratings: 100 psi at -100ºF to +250ºF 60 psi at 600ºF Catalog No. 34-011100-002 Aluminum Surface Mounting Well Approximate weight is 4 ounces (112 grams) Pressure Ratings: 100 psi at -100ºF to +250ºF 60 psi at 600ºF  For use with 172XX and 173XX THERMOSWITCH® Controllers  Catalog No. 34-011208-000 Low Pressure Hex Head Well (321 Stainless Steel Well & Head) Applicable Modifications Special Marking Applicable Special Features 31A Extended Shell Approximate weight is 4 ounces (112 grams) Pressure Ratings: 100 psi at -100ºF to +250ºF 60 psi at 600ºF  In many applications involving liquids and gases, the use of a well is recommended. When the removal of a hex or coupling head THERMOSWITCH® controller would require draining of the container in which it is inserted, the use of a well assembly permits removal of the controller at any time without other disturbances. When surrounding ambients are subject to extreme changes thus affecting THERMOSWITCH® control, the well makes it possible to insert the THERMOSWITCH® controller completely into the medium being controlled thereby eliminating these ambient temperature effects or  head effect . A well offers protection in applications where fluids have a corrosive effect on the brass shell of the THERMOSWITCH® controller. NOTE: Certain gases or liquids (including water at elevated temperatures) could be corrosive and/or cause electrolytic action, which could severely shorten the life of the controller. Where corrosion or electrolysis is suspect, the use of stainless steel heliarc welded thermowells or various platings or coatings may increase controller life. The rate of corrosion or electrolysis is influenced by a great many system parameters such as chemical makeup and temperature of the solution, stray electric currents, etc. Consult the supplier of your chemicals or Fenwal for suggestions. In addition, use a well to protect the THERMOSWITCH® controller from external forces or blows which could affect its operation.  Page 6  THERMOSWITCH®, Probe Type Temperature Controller  1-800-FENWAL-1  www.fenwalcontrols.com  MODIFICATIONS  (1) Special Marking 01-990010-XXX Special marking may be rubber stamped in indelible ink at points A, B, or C. Amount of marking is limited to the space available. Specify text and location of marking.  Modiifications which cannot be combined.  (2) Extended Lead Wires 01-9902X-XXX Lead wires may be extended to any length. Wire lengths are specified at that portion of lead wire outside of the THERMOSWITCH® controller, indicated by dimension  L . Special lead wire stripping may also be obtained by specifying length shown as dimension  X . (3) Factory Temperature Setting 01-990030-00X The controller may be preset at Fenwal to any temperature within its listed range to a minimum of 32ºF (0ºC). Unless this modification is specified, units are preset at approximately 75ºF (25ºC). Modification 4 is recommended when ordering a factory set unit to preclude a possible shift in set point due to mishandling. (4) Temperature Restraining Device 01-990040-000 A restraining device may be added to secure the temperature adjustment sleeve after calibration. This modification deters tampering with the setting. It also minimizes the possibility of a shift in calibration due to vibration.  (10) Moisture Resistant Tamper-proof Cap 01-99011X-XXX To seal a controller against moisture and tampering, a moisture resistant, tamper-proof cap may be mounted over the adjusting sleeve. It may be used with unset or factory preset units.  (13) Packing Gland on Lead Wires 01-990130-00X In installations where moisture may enter THERMOSWITCH® controller around lead wires, a packing gland is recommended. Modification 8 should be used with this modification.  (5) Tamper-proof Cap 01-990050-000 A tamper-proof cap can be furnished to prevent tampering with a THERMOSWITCH controller equipped with Modification 4 above.  (14) Extended Temperature Adjusting Sleeve 01-990140-XXX Adjustment sleeve extensions are available only in multiples of one inch. When ordering, the length specified is the  extended by  length  L . For example, if the standard adjusting sleeve length for the controller ordered is 3/8 to 5/8 inch, and a 4 inch extension is ordered, the overall length will be 43/8 to 45/8 inches. Minimum ordering quantities apply.  (6) Dial and Knob 01-990061-0XX (6A) A large dial and knob may be added to certain THERMOSWITCH controllers. Graduations are marked from  1  to  7  for adjustment to higher or lower temperature. Controllers may be ordered unset or factory preset. Dial will be set on NO. 4 position unless otherwise specified. 01-990062-0XX (6B) Same as 6A above except small dial and knob. (8) Moisture Resistant Seal 01-990080-001 (8A) Under certain conditions where there is excessive moisture or vapor, a moisture resistant seal may be added to protect the interior of the THERMOSWITCH controller. Modification 13 should be ordered with this modification. 01-990080-002 (8B) A same as 8A above except seal is four hole type so dial and knob may be used. Modification 13 should be ordered with this modification.  www.fenwalcontrols.com 1-800-FENWAL-1 THERMOSWITCH®, Probe Type Temperature Controller Page 7  When special features are specified, THERMOSWITCH® controllers are assigned a special catalog number. As a result, THERMOSWITCH® controllers as received may bear a different catalog number than the one specified on the customer order.  SPECIAL FEATURES  35  Polyvinyl Chloride (PVC) Lead Wires  PVC insulated wire can be supplied as a moistureresistant leadwire for those applications where the operating temperature does not exceed 175ºF (80ºC).  31  Extended Shell THERMOSWITCH® Controllers  Armored Cable  SF 01-982122-XXX SF 01-982123-XXX 5/8 diameter units 13/16 diameter units  In applications where a standard THERMOSWITCH® controller is too short to reach the medium to be controlled, the shell length may be extended. Extension must be ordered in increments of 1 inch beyond standard length.  31A Extended Shell - Protective Wells  Wells may be extended in increments of one inch. The THERMOSWITCH® controller must also be extended equally in length.  Armored Cable provides protection for the leadwires. (Cable is not moisture resistant.) Leadwires will be 2 inches longer than cable if cable is over 12 inches unless otherwise specified. Specify cable length  L . This feature includes a ground wire provision as required by approval agencies. In applications where a standard THERMOSWITCH® controller is too short to reach the medium to be controlled, the shell length may be extended. Extension must be ordered in increments of 1 inch beyond standard length.  34  Plating Of All Exposed Brass Parts  To overcome certain corrosive conditions, all exposed brass parts may be plated with tin, zinc, or nickel. Specify S.F.34 and plating material.  NOTE: Plating restricts the maximum temperature of the controllers as follows: Tin Nickel Tin 300ºF (149ºC) 600ºF (316ºC) 400ºF (204ºC)  HOW TO ORDER  1. Select controller and/or protective well detailed on Pages 2 - 7. 2. Order using catalog number. 3. Select applicable Modifications and/or Special Features detailed on Page 8 and order using 11 digit number shown In applications where a standard THERMOSWITCH® controller is too short to reach the medium to be controlled, the shell length may be extended. Extension must be ordered in increments of 1 inch beyond standard length.  !  Operation outside specifcations could result in failure of the Fenwal product and other equipment with injury to people and property.  NOTE: Specifications subject to change without notice  ®  400 MAIN STREET, ASHLAND, MA 01721 TEL: (508) 881-2000 FAX: (508) 881-7619 www.fenwalcontrols.com © 2004 Kidde-Fenwal Printed in U.S.A.  TAG  These instructions do not purport to cover all the details or variations in the equipment described, nor do they provide for every possible contingency to be met in connection with installation, operation and maintenance. All specifications are subject to change without notice. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser \'s purposes, the matter should be referred to KIDDE-FENWAL, Inc., Ashland, Massachusetts. P/N 1.10.21 5/27/04  www.fenwalcontrols.com  1-800-FENWAL-1  THERMOSWITCH®, Probe Type Temperature Controller  Page 8  ",721);arrFiles[114]=new Array(115,"HTML/Fenwal-Thermowell-Datasheet.pdf","13 Jul 2009","DS 1 10 21.qxp","","","PROTECTIVE WELLS  For use with 170XX 5/8  Diameter Cartridge THERMOSWITCH Controllers  Catalog No. 34-011201-000 Hex Head Well (321 Stainless Steel Well & Head) Applicable Modifications 1 Special Marking Applicable Special Features 31A Extended Shell Approximate weight is 4 ounces (112 grams) Pressure Ratings: 100 psi at -100ºF to +250ºF 60psi at 600ºF Catalog No. 34-011204-000 Coupling Head Well (321 Stainless Steel Well & Head) Applicable Modifications 1 Special Marking Applicable Special Features 31A Extended Shell Approximate weight is 5 ounces (140 grams) Pressure Ratings: 100 psi at -100ºF to +250ºF 60 psi at 600ºF Catalog No. 34-011100-002 Aluminum Surface Mounting Well Approximate weight is 4 ounces (112 grams) Pressure Ratings: 100 psi at -100ºF to +250ºF 60 psi at 600ºF  For use with 172XX and 173XX THERMOSWITCH® Controllers  Catalog No. 34-011208-000 Low Pressure Hex Head Well (321 Stainless Steel Well & Head) Applicable Modifications Special Marking Applicable Special Features 31A Extended Shell Approximate weight is 4 ounces (112 grams) Pressure Ratings: 100 psi at -100ºF to +250ºF 60 psi at 600ºF  In many applications involving liquids and gases, the use of a well is recommended. When the removal of a hex or coupling head THERMOSWITCH® controller would require draining of the container in which it is inserted, the use of a well assembly permits removal of the controller at any time without other disturbances. When surrounding ambients are subject to extreme changes thus affecting THERMOSWITCH® control, the well makes it possible to insert the THERMOSWITCH® controller completely into the medium being controlled thereby eliminating these ambient temperature effects or  head effect . A well offers protection in applications where fluids have a corrosive effect on the brass shell of the THERMOSWITCH® controller. NOTE: Certain gases or liquids (including water at elevated temperatures) could be corrosive and/or cause electrolytic action, which could severely shorten the life of the controller. Where corrosion or electrolysis is suspect, the use of stainless steel heliarc welded thermowells or various platings or coatings may increase controller life. The rate of corrosion or electrolysis is influenced by a great many system parameters such as chemical makeup and temperature of the solution, stray electric currents, etc. Consult the supplier of your chemicals or Fenwal for suggestions. In addition, use a well to protect the THERMOSWITCH® controller from external forces or blows which could affect its operation.  Page 6  THERMOSWITCH®, Probe Type Temperature Controller  1-800-FENWAL-1  www.fenwalcontrols.com  ",183);arrFiles[115]=new Array(116,"HTML/Fenwal-Midget-Thermoswitch.pdf","13 Jul 2009","7.01.3_Layout 1","","","7.01.3  Series 67000 and 68000  Series 67000 and 68000  Series 67000 and 68000  ",283);arrFiles[116]=new Array(117,"HTML/Fenwal-30000-Thermostat.pdf","13 Jul 2009","DS 11 01 3_DS 1 10 20.qxd","","","SERIES 30000  Surface Mounting THERMOSWITCH® Temperature Controllers  ®  11.01.3  FEATURES  · · · · · · · · Fully adjustable Overlapping ranges from 50ºF to 600ºF 1200 Watt resistive load rating at 120VAC/240VAC Narrow temperature differential UL component recognized CSA Certified Economical Compact size  ADJUSTMENT SCREW STOP COLLAR LOCKING SCREW  APPLICATIONS  · · · · · · · · Vending Machines Platens Plastic Laminating Presses Dental Equipment Popcorn Machines Hot Stamp Food Warming Trays Pressure Washers  TORQUE SPRING  DESCRIPTION  Fenwal Series 30000 Surface Mounting THERMOSWITCH® controllers operate on the principal of differential expansion of metals. A temperature increase causes the stainless steel outer case to expand at a greater rate than the internal bridge assembly. Because the case is in direct contact with the  heated surface, a temperature change is sensed almost instantaneously. With an incrase in temperature, the case expands. This results in a linear change of the internal bridge assembly causing the electrical contacts to open. A decrease in temperature closes the contacts. Field tried and time tested...quality products in the Fenwal tradition.  SPECIFICATIONS  APPROXIMATE TEMPERATURE RANGE CATALOG NUMBER APPROXIMATE ºF PER FULL TURN OF ADJUSTMENT SCREW CONTACT OPERATION ON TEMPERATURE RISE MATERIAL  *  CURRENT RATING  **  DIELECTRIC STRENGTH (Leads to Case)  50ºF to 300ºF  11-030000-000 4 +  250  85ºF to 250ºF  11-030000-048 4 +  175  Opens  50ºF to 600ºF  11-030002-000 4 +  575  Stainless Steel case and cover. Aluminum bronze adjusting screw. Aluminum mounting clamps.  120 VAC 10 Amps 240 VAC 5 Amps Resistive  1500 VAC 60 Hz  All specifications are subject to change without notice.  * In applications where contamination, corrosion or electrolysis is suspect, protect the controller so as to realize optimum performance and maximum life. Consult the factory for suggestions. ** Unless otherwise specified, all ratings apply to noninductive loads such as heaters or resistors. Tungsten filament lamps have an inrush 10 to 15 times the steady state current. Do not exceed ratings.  4 Normally available from stock.  + +  Recognized under the Component Program of Underwriters Laboratories, Inc. File No. E18974 Certified by Canadial Standards Association File No. LR7378  www.fenwalcontrols.com  1-800-FENWAL-1  THERMOSWITCH®, Surface Mount Temperature Controller  Page 1  Series 30000  OUTLINE DIMENSIONS  (Setting is either at high or low temperature setting but not both.) When ordering specify high or low temperature setting.  MODEL NO. APPROXIMATE SETTING TOLERANCE  11-030000-000 11-030000-048 11-030002-000 55  + 11ºF + 9ºF + 18ºF  Locking Screw If units are to be temperature set by customer, a locking screw is provided with unit. Torque spring is not shipped with this unit. Locking Screw and Torque Spring If units are to be temperature set by customer, but sitill remain adjustable, a locking screw and torque spring are provided with unit. Optional Cross Mounting Bracket A cross mounting bracket may be added to any unit as shown.  MODIFICATIONS  51 Adjusting Screw Length The Temperature Adjusting Screw may be ordered in different lengths so that dimensions  A  in (inches) is as follows: 13/64, 11/4, 13/4,17/8, 2 3/8, 211/16. Unless this modification is specified, units will be shipped with dimension  A  11/2 inch (38 mm) long. When ordering specify Catalog Number and Modification 51 with desired length. Typical order would read  Cat. No.30000 with Mod. 51 dimension  A ,17/8 inches long. Minimum ordering quantities apply. 52 Temperature Setting Any unit may be factory preset within its listed range with a setting tolerance of + 10ºF (+ 10ºF or 3% for Catalog Number 30002-0 whichever is greater). A locking screw is furnished with this modification. (See Modification 55) When ordering: Specify Modification 52 with temperature set at _____ ºF. 53 Special Calibration Any unit may have special high stop or low stop factory setting within its listed temperature range.  55A  62  62A  Same as Number 62 above except bracket is inverted.  HOW TO ORDER  1. Select temperature range from Specifications table. List appropriate Catalog Number 2. Select required Modification from above and list Modification Numbers after controller Catalog Number. EXAMPLE: 11-030000-048.  400 MAIN STREET, ASHLAND, MA 01721 TEL: (508) 881-2000 FAX: (508) 881-7619 www.fenwalcontrols.com © 2009 Kidde-Fenwal Printed in U.S.A.  TAG  These instructions do not purport to cover all the details or variations in the equipment described, nor do they provide for every possible contingency to be met in connection with installation, operation and maintenance. All specifications are subject to change without notice. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser \'s purposes, the matter should be referred to KIDDE-FENWAL, Inc., Ashland, Massachusetts. P/N 11.01.3 2/13/09  www.fenwalcontrols.com  1-800-FENWAL-1  THERMOSWITCH®, Surface Mount Temperature Controller  Page 2  ",110);arrFiles[117]=new Array(118,"HTML/Fenwal-Snap-Disc.pdf","13 Jul 2009","8.10.12.qxp","","","SERIES 08-02  Precision Snap Disc Thermostats Surface Mounting Type  8.10.12  FEATURES  · · · · · · · · · Ratings to 12A at 240VAC 100,000 Cycle Rating UL Component Recognized CSA Certified CE Compliant Tamper-Proof Preset Temperature Calibrated Settings from 35 to 350°F (2 to 176°C) Automatic Reset Vibration Resistant  APPLlCATlONS · Power Supplies · Solar Heating · Copiers · Communications Equipment · Refrigeration Compressors · Welding Equipment · Food Processing  DESCRIPTION  A snap-acting bimetal disc serves as the actuating element in these rugged, precision thermostats. As the temperature reaches the tamper-proof predetermined set point, the disc snaps to provide rapid, positive contact action minimizing radio frequency interference and ensuring high reliability. These thermostats are individually calibrated and tested to meet both thermal and electrical characteristics. The single contact switch arm assembly minimizes failures due to contact contamination, while the fine silver contacts assure long life and excellent current carrying capacity. Resistance to vibration and harsh environments are additional features. The polyphenelene sulfide base and metal cap provide protection from contamination and an optional epoxy seal improves resistance to harsh environments. Many terminations and mounting assemblies are available to permit great flexibility in installation. Thermostats feature current carrying capacities up to 12A at 240VAC measuring .350  in height. An optional epoxy seal provides additional protection against contamination. TEST SAMPLES Operating samples can be supplied for application tests. A completed Fenwal Snap Disc Application Data Form is required to select and produce an operating sample. Application Data Forms are available from Fenwal or your local Fenwal sales representative. Selected 08-02 models can be ordered from the Quick Ship Program for next day delivery. Consult Quick Ship brochure.  www.fenwalcontrols.com  1-800-FENWAL-1  Series 08-02, Surface Mount Snap Disc Thermostat  Page 1  SPECIFICATIONS  Switch Action SPST (normally open or normally closed) Dielectric Strength 1500 VAC terminals to case. Insulation Resistance 100 Megohms minimum at 500VDC. Vibration MIL-STD-202D, Method 204B, 10 G \'s. Shock MIL-STD-213B, Test Condition K, 30 G \'s, 11 millisec. RANGES AND TOLERANCES TABLE 1 TABLE 3 Mounting Bracket B1­No Bracket (Cap Only) B2­Bottom Oval Flange B6­Stud Mounting Screw Cap and Mounting Flange Material C3­Stainless Steel Mounting Hardware Size H1­No hardware (use with B1) H4­#6 screw for flange mounting H5­#8 screw for flange mounting (B4 only) H6­#6 screw for stud mounting Terminals Positions T1­Eyelet, opposed horizontal T2­Eyelet, opposed vertical T3­Eyelet, parallel horizontal T4­Eyelet, parallel horizontal, reverse step T6­1/4  Quick Connect, opposed horizontal T7­1/4  Quick Connect, opposed vertical T10­Leads, opposed horizontal T11­Leads, opposed vertical T12­Leads, parallel horizontal T13­Leads, parallel vertical T14­Vertical lead wires with epoxy filled mylar sleeve Lead Wires (specify length) L1­No Lead Wires L2­105°C PVC, 18 AWG, 600V insulation L3­200°C TFE, 18 AWG, 300V insulation L4­250°C TGGT, 18 AWG, 300V insulation  35 2  NOTE: Differences in temperature testing procedures and equipment, between those of the manufacturer and the customer, can result in temperature variances of up to 2°F.  ELECTRICAL RATINGS (Resistive) TABLE 2  and units rated for AC operation only. U.L. File E18974, Guide XAPX2. C.S.A. File LR 7378, Class 4823 02.  Certified by BG Technology  OUTLINE DIMENSIONS  Page 2  Series 08-02, Surface Mount Snap Disc Thermostat  1-800-FENWAL-1  www.fenwalcontrols.com  TERMINALS AND POSITIONS  Dimensions in brackets are millimeters.  Specifications subject to change without notice.  www.fenwalcontrols.com  1-800-FENWAL-1  Series 08-02, Surface Mount Snap Disc Thermostat  Page 3  MOUNTING BRACKETS  Hardware Size H4  Dim. A .143 (3.63)  Hardware Size H6  Dim. A 6-32 x 3/8   HOW TO ORDER  To more clearly define specific requirements, please complete a Fenwal Snap Disc Application Data Form, available from Fenwal or your local Fenwal sales representative. TO ORDER: 1. Select Series Number desired from Table 1 on Page 2. 2. Specify opening and closing temperatures in degrees Fahrenheit or Celsius with tolerances; and whether the switch action should open or close on temperature rise. 3. Specify terminals and mounting configurations by selecting one code number from each category in Table 3. If lead wires are required, specify length. EXAMPLE: 08-02, open at 175°F, close at 155°F, B2, C3, H4, T1, L1 = Series 08-02 thermostat set to open at 175°F ± 7°F on temperature rise, close at 155°F ± 7°F on temperature drop. Bottom oval flange mounting bracket; stainless steel cap and mounting flange material; holes to accept #6 mounting hardware (not supplied); eyelets, opposed horizontal; no lead wires.  400 MAIN STREET, ASHLAND, MA 01721 TEL: (508) 881-2000 FAX: (508) 881-6729 www.fenwalcontrols.com  These instructions do not purport to cover all the details or variations in the equipment described, nor do they provide for every possible contingency to be met in connection with installation, operation and maintenance. All specifications are subject to change without notice. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser \'s purposes, the matter should be referred to KIDDE-FENWAL, Inc., Ashland, Massachusetts. P/N 8.10.12  Fenwal ® is a registered trademark of Kidde-Fenwal, Inc.  © 2007 Kidde-Fenwal. All rights reserved.  Printed in U.S.A. TAG  3/15/07  Page 4  Series 08-02, Surface Mount Snap Disc Thermostat  1-800-FENWAL-1  www.fenwalcontrols.com  ",88);arrFiles[118]=new Array(119,"HTML/Fenwal-DetectAFire.pdf","13 Jul 2009","DS 12 01 9_DS 12 01 7.qxd","","","DETECT-A-FIRE  FEATURES  ®  ®  Detection and Release Devices  12.01.9  · Repeatable - resets itself, nothing to replace, testable · Rugged - withstands shock and vibration · Versatile - offers various temperature settings · Durable - long lasting stainless steel shell · Economical - wide spacing, reduces installation cost · Factory set and the internal contact area is hermetically sealed in stainless steel APPLlCATlONS · Protection of schools, factories, offices, libraries, etc. · Paint spray booths · Range hoods  DESCRIPTION  DETECT-A-FIRE units are the  heart  of many Fire Protection Systems. These highly reliable devices have been a standard of the industry for over 45 years. Many thousands of these units are now in use controlling the release of extinguishants such as clean agents, C02, water, or dry chemicals. In some systems the device is used as an ALARM device, to sense overheat or fire, and alert personnel. In other systems, it is used as a RELEASE device, to sense fire and actuate fire attack systems. DETECT-A-FIRE units have met with wide acceptance because they are designed with RATE COMPENSATION. This provides a unique advantage over both fixed temperature and rate-of-rise types of detectors because only the DETECT-A-FIRE unit accurately senses the surrounding air temperature regardless of the fire growth rate. At precisely the predetermined danger point, the system is activated. Fixed temperature detectors must be completely heated to alarm temperature and therefore a disastrous lag in time may occur with a fast rate fire. Rate-of-rise devices, on the other hand, are triggered by the rate of increase in ambient temperature and are subject to false alarms caused by harmless, transient thermal gradients such as the rush of warm air from process ovens.  The secret of the unit \'s sensitivity is in the design (Figure 1). The outer shell is made of a rapidly expanding alloy which closely follows changes in surrounding air temperature. The inner struts are made of a lower expanding alloy. Designed to resist thermal energy absorption and sealed inside the shell, the struts follow temperature changes more slowly. A slow rate fire (Figure 2) will heat the shell and struts together. At the  set point,  the unit will trigger, actuating the alarm or releasing the extinguishant. A transient rush of warm air up to 40° F/min. may expand the shell, but not enough to trigger the unit. By ignoring transient warm air excursions, the DETECT-A-FIRE unit virtually eliminates false alarms prevalent with rate-of-rise devices. If a fast rate fire (Figure 3) starts, the shell will expand rapidly. The struts will close, actuating the alarm or releasing the agent. The faster the fire rate of growth,the sooner the DETECT-A-FIRE unit will react.  FIGURE 1: READY  www.fenwalcontrols.com  FIGURE 2: SLOW FIRE  1-800-FENWAL-1  FIGURE 3: FAST FIRE  Page 1  DETECT-A-FIRE® Detection and Release Device  SPECIFICATIONS  HORIZONTAL DETECT-A-FIRE-UNITS  Horizontal detectors are designed for locations where appearance is a factor. The attractive, functional design lends physical protection of the unit while making it suitable for commercial, industrial, mercantile and public buildings,institutions and ships in non-hazardous locations (thoseclassified as  ordinary  under the National Electric Code). Flush mounted units are designed to fit standard 4  octagonal electrical boxes and surface mounting units are designed to mount directly on ceilings or on 4  electrical junction boxes. Canadian Electrical Codes requires mounting only to an electrical junction box.  HORIZONTAL DETECT-A-FIRE-UNITS  Flush Mounting Unit for Concealed Wiring  Surface Mounting Unit for Exposed Wiring  VERTICAL DETECT-A-FIRE-UNITS  Vertical detectors are designed for use in both  ordinary  or  hazardous  locations. For  ordinary  use, they may be mounted to any approved junction box with 7/8  diameter opening by using 1/2-14 NPT mounting nuts. The device may be wired in or out of conduit, depending on localpreference and codes. Four leadwires are provided onnormally open vertical units (that close on temperature rise), per UL requirement, to facilitate supervision of system wiring. Instruments are Underwriters Laboratory and Underwriters Laboratory of Canada listed and Factory Mutual approved for hazardous locations, when mounted in a suitable fitting.  12-X27020-000 12-X27021-000  12-X27020-001 12-X27021-001  MODEL NO.  MOUNTING  DETECT-A-FIRE units are not position sensitive. Horizontal and vertical detectors refer to the most common mounting configuration for that unit. However, each type can be mounted either horizontally or vertically depending on the application and installation requirements.  FITTING REQUIRED HAZARDOUS LOCATIONS DETECTOR TYPE FOR UL & ULC LISTINGS AND FM APPROVAL  CONTRACT OPERATION ON TEMPERATURE RISE  APPROX. WEIGHT PER UNIT  ELECTRICAL RATING (RESISTIVE ONLY)  12-X27020-000 12-X27020-001 12-X27021-000 12-X27021-001  Opens (325° F Max Closes (325° F (Max)  10 oz  5.0 Amps 125 VAC 0.5 Amps 125 VDC 5.0 Amps 0.5 Amps 2.0 Amps 1.0 Amps 125 VAC 125 VDC 24 VDC 48 VDC  10 oz  CONSTRUCTION  Stainless steel shell sensing element. Cold rolled steel mounting facility. Off-White finish.  Class I, Groups A, B, C and D; Class II, Groups E, F and G Class I, Groups B, C and D; Class II , Groups E, F and G  12-X27120-022 12-X27121-020 12-X28020-003 12-X28021-005 12-X27120-000 12-X27121-000 12-X28021-000  Mount detector to a suitable listed fitting in accordance with National Electric Code and/or local authority having jurisdiction.  TEMPERATURE RATING  (Suggested setting a minimum of 100° F above ambient)  NOTE:  Only units with stainless steel shell and head are approved for Class I, Group A locations.  °F SETTING  °F TOLERANCE  SPACINGS (in feet) See NOTE A UL ULC FM  COLOR CODING  NOTE A: Spacings shown are distances between units on smooth ceilings, the distances from partitions or walls would be half that shown. Authority having LOCAL jurisdiction should be consulted before installation. NOTE B: Temperature preset at factory only. Special settings available upon request. Consult factory or Fenwal Representative for additional information. NOTE C: In applications where corrosion is suspect, care should be taken to protect the DETECT-A-FIRE unit to realize optimum performance and maximum life. Consult factory for suggestions. NOTE D: Up to 375° F-#18 AWG Teflon insulated wire used on units. Above 375° F-#16 AWG TGGT insulated wire used on units. NOTE E: Per UL521 requirements - low temperature exposure test is -22° F (-30° C) Specifications subject to change without notice. UL of Canada labeling available upon request. Although incandescent lamps are considered resistive, their inrush current is 10-15 times their steady current. Do not exceed ratings.  140 160 190 225 275 325 360 450 600 725  + + + + + + + + + +  7/-8 7/-8 7/-8 7/-8 10 10 10 15 20 25  50 25 50 25 25 50 25 25 N/A N/A  50 25 50 50 50 50 50 50 50 50  25 25 25 25 25 25 25 25 25 25  Black Black White White Blue Red Red Green Orange Orange  Page 2  DETECT-A-FIRE® Detection and Release Device  www.fenwalcontrols.com  1-800-FENWAL-1  VERTICAL DETECT-A-FIRE-UNITS  For Concealed and Exposed Wiring (Hexagonal Head)  VERTICAL DETECT-A-FIRE-UNITS  For Concealed and Exposed Wiring (Coupling Head)  12-X27120-000 12-X27120-022  12-X27121-000 12-X27121-020  12-X28020-003  12-X28021-005  MODEL NUMBER  MOUNTING HEAD MATERIAL Brass Type 300 Stainless Steel Brass Type 300 Stainless Steel  SHELL MATERIAL  CONTACT OPERATION ON TEMPERATURE RISE Opens (450° F Max) Closes  ELECTRICAL RATING (RESISTIVE ONLY) 5.0 Amps 125 VAC 0.5 Amps 125 VDC 5.0 Amps 0.5 Amps 2.0 Amps 1.0 Amps 125 VAC 125 VDC 24 VDC 48 VDC  APPR0X. WEIGHT PER UNIT 5 oz.  12-X27120-000 12X27120-022 12-X27121-000 12-X27121-020  5 oz.  12X28020-003 12-X28021-005  Type 300 Stainless Steel Type 300 Stainless Steel  Type 300 Stainless Steel  Opens (450° F Max.) Closes  5.0 Amps 125 VAC 0.5 Amps 125 VDC 5.0 Amps 0.5 Amps 2.0 Amps 1.0 Amps 125 VAC 125 VDC 24 VDC 48 VDC  5 oz.  5 oz.  x  Indicates a stock unit  STOCKED MODELS AND TEMPERATURE SETTINGS  (Suggested setting a minimum of 100° F above ambient)  TEMPERATURE SETTING (° F) 140 X X X X X X X X X X X X X X X X X X X X X X 160 190 X 225 275 325 360 450 600 725  MODEL 12-X27020-000 12-X27020-001 12-X27021-000 12-X27021-001 12-X27120-000 12-X27121-000 12-X28021-005  www.fenwalcontrols.com  1-800-FENWAL-1  DETECT-A-FIRE® Detection and Release Device  Page 3  FIGURE 4: Dust Cover Application This is a typical application of DETECT-A-FIRE units used as a release device to actuate a complete fire suppression system. In this application DETECT-A-FIRE units are mounted in a Dust Collector to sense an overheat condition and release a clean agent extinguishant.  This chart shows three categories of fire detection devices and their relative response levels for reaction to three different rate-of-rise conditions. Statistics indicate that 97% of all fires fall within these categories.  RATE-OF-RISE  TYPE OF DEVICE  Rate Compensated DETECT-A-FIRE Unit  UNDER 10 ° F/MIN. FIRST SECOND Will not operate unless fixed temperature supplement at 165° F is provided, then it is THIRD in sequence  BETWEEN 10-40 ° F/MIN FIRST SECOND Will not operate unless fixed temperature supplement at 165° F is provided, then it is THIRD in sequence  OVER 40 ° F/MIN SECOND but at selected protection level THIRD FIRST but may be a false alarm  Fixed Temperature Rate-of-Rise  MODIFICATIONS  12-992012-XXX, Fluorocarbon coating, Available on 27120-022, 27121-020, 28020-003, 28021-005 models only (500 °F max.). FIGURE 5: Typical ceiling installation of a horizontal DETECT-A-FIRE model. Here it is used in combination with a sprinkler system to detect overheat and actuate an alarm.  AGENCY LISTINGS  Fenwal DETECT-A-FIRE units are UL and ULC listed and FM approved as fire detection thermostats (close on temperature rise) and as releasing devices (open on temperature rise).  AGENCY  UL UL ULC FM FM UL UL  FILE NUMBER  S492 E19310 CS341-E J.I. OV3HO.AE 17302 S2410 E89599  LOCATION  Ordinary Hazardous Ordinary and Hazardous Hazardous Ordinary Ordinary (600 & 725° F) Hazardous (600 & 725° F)  HOW TO ORDER  1. Select the DETECT-A-FIRE model from specifications on pages 2 and 3. 2. Refer to temperature rating chart on page 2, select temperature setting required and add this number to base catalog number.  EXAMPLE: Vertical DETECT-A-FIRE set to close at 225° F.  12-X27121-000-225  Type Temperature Setting  ®  KIDDE-FENWAL INC. 400 MAIN STREET , ASHLAND, MA 01721 TEL: (508) 881-2000, FAX: (508) 881-6729 www.fenwalcontrols.com  These instructions do not purport to cover all the details or variations in the equipment described, nor do they provide for every possible contingency to be met in connection with installation, operation and maintenance. All specifications are subject to change without notice. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser \'s purposes, the matter should be referred to KIDDE-FENWAL, Inc., Ashland, Massachuset \'ts © 2009 Kidde-Fenwal Inc. Printed in U.S.A. TAG 500  P/N 12.01.9  02/13/09  Page 4  DETECT-A-FIRE® Detection and Release Device  www.fenwalcontrols.com  1-800-FENWAL-1  ",158);arrFiles[119]=new Array(120,"HTML/Fenwal-20000-Thermostat.pdf","13 Jul 2009","Microsoft Word - Series20_21_22000.doc","","","",722);arrFiles[120]=new Array(121,"HTML/GP50-35.pdf","21 Jul 2009","A5SL-35.00:Layout 1.qxd","","","Pressure, Level & Temperature Transmitters & Transducers  TRANSDUCER/TRANSMITTER &TEMPERATURE PROBE  Models 135, 235, 335  FEATURES:  · Pressure and temperature measurement from a single mounting well · Rugged, all-welded, all stainless steel construction · Interchangeable with existing systems · Adjustable calibration signal option · Replaceable thermocouple during use (Type J std.) · Internal Calibration Resistor set to 80% ±0.5% FSO · Zero and Span controls, approximately ±20% FSO (235, 335 only)  PLASTIC MELT PRESSURE PLASTIC MELT PRESSURE  PRESSURE RANGES:  · From 0-500 through 0-30,000 psi (See ordering guide)  ACCURACY:  (Non-Linearity, Hysteresis, Non-repeatability).  · ±0.25% FSO, RSS (0-5000 psi & higher) · ±0.5% FSO, RSS (0-500 and 0-3500 psi).  J TYPE THERMOCOUPLE STD.  THERMOCOUPLE LOCK SCREW .28 OD FLEXIBLE ARMORED 3  CABLE 7/8 HEX  1/2-20 UNF-2A THD 0.306 +/- .001DIA 0.412 DIA  .50 DIA 1.25 1.9 NOM. PTIH-10-6P STD PC02E-12-8P OPT.  .42 DIA 1.060  0.215 0.440  6.0 STD  .68 DIA 1.50 DIA 1.25 2.5 NOM  FLEXIBLE 18  ARMORED CABLE Some options will affect dimensions. Consult factory if important.  GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochure without prior notification. Please contact the factory on all critical dimensions and specifications for verification.  A5SL-35.00  2770 Long Road, Grand Island, NY 14072 USA Tel. (716) 773-9300 Fax (716) 773-5019 E-mail:sales@gp50.com website:www.gp50.com  Pressure, Level & Temperature Transmitters & Transducers  Specifications reflect standard product, improved performance/mechanical options available. Modifications may alter specs, consult factory for more information.  WIRING CODE  PTIH-10-6P A/1 B/2 C/3 D/4 E/5 F/6 PC02E-12-8P A/1 B/2 C/3 D/4 E/5 F/6 G/7 H/8 PIGTAIL RED BLACK SHIELD 135 + SIGNAL - SIGNAL + EXC. - EXC. CALIBRATE CALIBRATE 135 + EXC. + SIGNAL - EXC. - SIGNAL 235 + SIGNAL - SIGNAL* + EXC. - EXC.* CALIBRATE CALIBRATE 235 + EXC. + SIGNAL - EXC.* - SIGNAL* 335 + EXC./SIG- EXC./SIGNAL NC NC CALIBRATE CALIBRATE 335 + EXC./SIGNAL NC NC - EXC./SIGNAL CALIBRATE CALIBRATE NC NC  ORDERING GUIDE:  Use the following codes to identify desired item.  MODEL   RANGE   OPTIONS //  Example: 335-RZ-CC/GU MODEL  135 235 335 3.33 mV/V 5 Vdc 4 - 20 mA  PRESSURE RANGE (PSI) (BAR)  RH RK RM RO RT RV RX RZ SB SD SF SZ 50 75 100 150 200 300 500 750 750 750 750 Other UV UX UY VA VC VD VE UA UH UC 50 75 100 200 350 500 700 1000 1400 2000  CAL. (Common) CAL. (Common) CAL. (Int. Res.) CAL. (Int. Res.) NC NC CAL. (Ext. Res.) CAL. (Ext. Res.) 335 + EXC./SIGNAL - EXC./SIGNAL NC  * -Signal and - Excitation  are common to each other.  Material in Contact with Pressure Media Proof Pressure Temperature Limits Diaphragm Strain Gauge Housing Temperature Effects From Fill Zero From Strain Gauge Housing Zero Span Electricals Excitation Voltage (Model 135) 3.5-15 Vdc (Model 235) 9-40 Vdc (Model 335) 9-36 Vdc Zero Balance (Model 135) (Model 235) (Model 335)  15-5 PH Stainless steel and chrome plated diaphragm surface. 2 times full scale pressure range or 35,000 psig whichever is less 750ºF (400ºC), 1000ºF available with NaK fill 176ºF (80ºC)  OPTIONS AA None (standard connector PTIH-10-6P) ALTERNATE CONNECTOR OR CABLE CC Bendix PC02E-12-8P, [Mate: PC06A-12-8S-(SR), not included] CD Cannon WK6-32S, [Mate: WK6-21C, not included] CF 1/2  NPT(M) thread with 36  potted leads CZ Alternate Connector/ Cable/ Other ALTERNATE PRESSURE PORT FB M18 X 1.5 Metric Thread FG M14 X 1.5 Metric Thread FZ Non-Standard Pressure Port GENERAL GB Alternate Electronic Output Specify Zero and Span output values GP Hastelloy C-276 Diaphragm & Threads GQ Boron-Hardened diaphragm GU Type K Thermocouple QJ NaK Fill for 750°F max. applications GW NaK Fill with Inconel diaphragm and stem for 1000°F max. applications GV Silicone Oil Fill (Increases thermal shift) Consult factory GX Mineral Oil Fill (Increases thermal shift) Consult factory GZ Customer Special JL Adjustable Shunt Calibration JW Titanium Nitride-Coated Diaphragm & Threads MO Gentran Wiring MP Barber-Colman Wiring JA Removable 100 ohm 3 wire RTD RIGID STEM GN 12.5  Rigid Stem FLEX TUBING GT 30  Armored Capillary Tube  8 psi/100ºF per inch of stem and capillary Less than ± 1.0% FSO/100ºF (± 2.0% FSO/100ºC) Less than ± 1.0% FSO/100ºF (± 2.0% FSO/100ºC) Output at 70° F (Model 135) (Model 235) (Model 335)  3.33 mV/V ± 2% 5.0 Vdc ±2% 4-20 mA ±2%  0.0 mV/V ±5% FSO at 70°F 0.0 Vdc ±2% FSO at 70°F 4.0 mA ±2% FSO at 70°F  Input Impedance (Model 135) 350 ohm, nominal Input Current (Model 235)  8 mA nominal  Load Impedance (Model 135) 50,000 ohms minimum for less than 0.1% FSO attenuation. (Model 335) 1350 ohms max. at 36 Vdc & 750 ohms 24 Vdc Output Current (Model 235)  2.0 mA maximum for less than 0.1% FSO attenuation. Range Ca. Signal 80% ±0.5% FSO standard Signal Connector PTIH-10-6P, standard Mate PT06A-10-6S (SR), not included Standard 2 pole, 7/16  pin spacing  Thermocouple Connector  Pressure Connection 1/2  - 20UNF - 2A thread for standard extruder pressure port Mounting Torque 500 inch pounds, maximum  2770 Long Road, Grand Island, NY 14072 USA Tel. (716) 773-9300 Fax (716) 773-5019 E-mail:sales@gp50.com website:www.gp50.com  ",83);arrFiles[121]=new Array(122,"HTML/GP50-1310.pdf","15 Jul 2009","A5SL-1310.00:Layout 1.qxd","","","Pressure, Level & Temperature Transmitters & Transducers  PLASTIC MELT PRESSURE TRANSDUCER / TRANSMITTER KITS  The GP:50 product line of melt pressure transducers and transmitters is based on the proven bonded strain gauge principle successfully utilized in thousands of applications. Our unique design incorporates a heavier sensor allowing a thicker tip diaphragm, provides better linearity, and reduces costs. The design incorporates an extremely small capillary tubing that transmits the media pressure to the strain gauge sensor and mating electronics via a mechanical fill fluid. (Mercury is the standard, Silicone oil, Mineral oil and Nak are readily available depending on the application). GP:50 Melt-Kits come with everything you need for efficient and reliable extrusion pressure measurement. Melt-Kits include transducer, cable, indicator and more.  PLASTIC MELT PRESSURE PLASTIC MELT PRESSURE  STARTER MELT KIT:  Ideal for processors currently using blow plugs · Model 30 pressure transducer · 1211-B-B-1-R melt pressure indicator · MECA-CA connecting cable · MHK-AA transducer mounting hole machining tool kit · Getting started guide · Tube of anti-sieze compound · Screwdriver · GP:50 baseball hat  Seen here with Model 30  CLASSIC MELT KIT:  Ideal for processors currently measuring pressure · Model 30 or Model 31 transducer · 1211-B-B-1-R melt pressure indicator · MECA-CA connecting cable · Getting started guide · Tube of anti-sieze compound · Screwdriver · GP:50 baseball hat  Seen here with Model 31 A5SL-1310.00  2770 Long Road, Grand Island, NY 14072 USA Tel. (716) 773-9300 Fax (716) 773-5019 E-mail:sales@gp50.com website:www.gp50.com  Pressure, Level & Temperature Transmitters & Transducers  TEMPERATURE / PRESSURE MELT KIT:  Ideal for processors with temperature and pressure measurement requirements · Model 35 temperature/pressure transducer · 1290 indicator · MECA-CA connecting cable · MTC-AA thermocouple connector · Getting started guide · Tube of anti-sieze compound · Screwdriver · GP:50 baseball hat  DIFFERENTIAL MELT KIT:  Ideal for processors who measure and control differential pressure · Two 131 or two 331 pressure transducers · 1235 process controller · Two MECA-CA connecting cables · Getting started guide · Tube of anti-sieze compound · Screwdriver · GP:50 baseball hat  ORDERING GUIDE:  Starter Melt-Kit Model 1310  Model · Transducer · Range · Options  Temperature / Pressure Melt-Kit Model 1312  Ex: 1312-135-RX-AA Transducer 135 3.3 mV/V 235 5 Vdc 335 4-20 mA  Classic Melt-Kit Model 1311  Differential Melt-Kit Model 1313  Ex: 1313-131-RX-AA Transducer 131 3.3 mV/V 331 4-20 mA  Pressure Ranges (PSI) RH 500 RK 750 RM 1000 RO 1500 RT 3000 RV 5000 RX 7500 RZ 10000  Ex: 1310-130-RX-AA Ex: 1311-130-RX-AA Transducer 130 3.3 mV/V 230 5 Vdc 330 4-20 mA Transducer 130 3.3 mV/V 230 5 Vdc 330 4-20 mA 131 3.3 mV/V 231 5 mV/V 331 4-20 mA  Consult factory for additional options.  2770 Long Road, Grand Island, NY 14072 USA Tel. (716) 773-9300 Fax (716) 773-5019 E-mail:sales@gp50.com website:www.gp50.com  ",103);arrFiles[122]=new Array(123,"HTML/GP50-30-31.pdf","17 Jul 2009","A5SL-30.00:Layout 1.qxd","","","Pressure, Level & Temperature Transmitters & Transducers  PLASTIC MELT PRESSURE TRANSDUCER/TRANSMITTER  Models 130,230,330 (RIGID) 131,231,331 (FLEXIBLE)  GENERAL  The GP:50 product line of melt pressure transducers and transmitters are based on the proven bonded strain gage principle successfully utilized in thousands of applications. Our unique design incorporates a heavier sensor allowing a thicker tip diaphragm, provides better linearity, and reduces costs. The design incorporates an extremely small capillary tubing that transmits the media pressure to the strain gage sensor and mating electronics via a mechanical fill fluid. (Mercury is the standard, Silicone oil, Mineral oil and Nak are readily available depending on the application)  FEATURES:  · Rugged, all-welded, all stainless steel construction. · Interchangeable with existing systems. · Many options available, Hastelloy C-276 or Boron-Hardening · Explosion-Proof ratings available · Internal Calibration Resistor set to 80% ± 0.5% FSO · Zero and Span controls, approximately ± 20% FSO (2XX, 3XX only)  PLASTIC MELT PRESSURE PLASTIC MELT PRESSURE  WIRING CODE  PTIH-10-6P 130, 131 A/1 + SIGNAL B/2 - SIGNAL C/3 + EXC. D/4 - EXC. E/5 CALIBRATE F/6 CALIBRATE  PC02E-12-8P 130, 131 A/1 B/2 C/3 D/4 E/5 F/6 G/7 H/8  230, 231 + SIGNAL - SIGNAL* + EXC. - EXC.* CALIBRATE CALIBRATE  230, 231  330, 331 + EXC./SIG. - EXC./SIG. NC NC CALIBRATE CALIBRATE  330, 331 + EXC./SIGNAL NC NC - EXC./SIGNAL CALIBRATE CALIBRATE NC NC  PRESSURE RANGES:  · From 0-500 through 0-30,000 psi) (See ordering guide)  ACCURACY:  (Non-Linearity, Hysteresis, Non-repeatability). · ± 0.25% FSO, RSS (0-5000 psi & higher) · ± 0.5% FSO, RSS (0-500 and 0-3500 psi)  + EXC. + EXC. + SIGNAL + SIGNAL - EXC. - EXC.* - SIGNAL - SIGNAL* CAL. (Common) CAL. (Common) CAL. (Int. Res.) CAL. (Int. Res.) NC NC CAL. (Ext. Res.) CAL. (Ext. Res.)  PIGTAIL RED BLACK SHIELD  330, 331 + EXC./SIGNAL - EXC./SIGNAL NC  * -Signal and - Excitation  are common to each other.  MODEL 30  PTIH-10-6P STD PC02E-12-8P OPT.  1/2-20 UNF-2A THD 5/8 HEX .50 DIA .42 DIA  1.50 DIA  44 30 45 30 .414 DIA .412 .307 DIA .305 .209 .219  .44 .47 REF 2.56 .50  8.63 STD 6.00 STD 1.06  MODEL 31  1.50 DIA  PTIH-10-6P STD PC02E-12-8P OPT. .68 DIA  .28 OD FLEXIBLE ARMOR  44 30 5/8 HEX 1/2-20 UNF-2A THD 45 30 .414 DIA .412 .42 DIA .50 DIA .307 DIA .305  .44  .47 REF 2.56  1.25  .209 DIA .219  18. NOM .50 28.31 STD  1.06 6.00 STD  GP:50 reserves the right to make product improvements and amendments to the product specifications stated throughout this brochure without prior notification. Please contact the factory on all critical dimensions and specifications for verification.  A5SL-30.00  2770 Long Road, Grand Island, NY 14072 USA Tel. (716) 773-9300 Fax (716) 773-5019 E-mail:sales@gp50.com website:www.gp50.com  Pressure, Level & Temperature Transmitters & Transducers  Specifications reflect standard product, improved performance/mechanical options available. Modifications may alter specs, consult factory for more information.  Full Scale Pressure Ranges - See ordering guide Accuracy Static Error Band (Non-linearity, Hysteresis, Non-repeatability) ± 0.5% FSO(RSS) 500 through 3500 psi ± .25% FSO(RSS) 5000 through 30000 psi  ORDERING GUIDE:  Use the following codes to identify desired item.  Material in Contact with Pressure Media 15-5 PH diaphragm, Armoloy coated (hard chrome) Diamond, Boron or Titanium Nitride coatings optional Proof Pressure 2 times full scale pressure range or 35,000 psi whichever is less  MODEL  RANGE  OPTIONS  //  Temperature Limits Diaphragm Strain Gauge Housing Temperature Effects from Diaphragm From Fill Zero From Strain Gauge Housing Zero Span Electricals Excitation Voltage (Model 130/131) 3.5-15 Vdc (Model 230/231) 9-40 Vdc (Model 330/331) 9-36 Vdc Zero Balance (Model 130/131) (Model 230/231) (Model 330/331)  Example: 331-RV-CF/GP  750°F (400°C), 1000°F available with NaK fill 176°F (80°C)  OPTIONS  AA None (standard connector PTIH-10-6P)  8 psi/100ºF per inch of stem and capillary Less than ± 1.0% FSO/100°F (± 2.0% FSO/100°C) Less than ± 1.0% FSO/100ºF (± 2.0% FSO/100°C) Output at 70° F (* Amplified Output) 3.33* mV/V ± 2% 5.0 Vdc ±2% 4-20 mA ±2%  ALTERNATE CONNECTOR OR CABLE  CC CD CF CZ Bendix PC02E-12-8P, [Mate: PC06A-12-8S-(SR), not included] Cannon WK6-32S, [Mate: WK6-21C, not included] 1/2  NPT(M) thread with 36  potted leads Alternate Connector/ Cable/ Other  ALTERNATE PRESSURE PORT  FB FG FZ M18 X 1.5 Metric Thread M14 X 1.5 Metric Thread Non-Standard Pressure Port  0.0 mV/V ±5% FSO at 70°F 0.0 Vdc ±2% FSO at 70°F 4.0 mA ±2% FSO at 70°F Input Current (Model 230/231)  GENERAL  GB  8 mA nominal  Input Impedance (Model 130/131) 350 ohm, nominal  Load Impedance (Model 130/131) 50,000 ohms minimum for less than 0.1% FSO attenuation. (Model 330/331) 1350 ohms max. at 36 Vdc & 750 ohms 24 Vdc Output Current (Model 230/231) 2.0 mA maximum for less than 0.1% FSO attenuation. Range Ca. Signal 80% ±0.5% FSO standard Connections Pressure 1/2  - 20 UNF-2A thread for standard (M18 x 1.5 metric thread optional) Electrical PTIH-10-6P, standard PT06A-10-6S (SR), standard mate (not included) See options. Enclosed Materials 316 stainless steel Mounting Torque Identification 500 inch pounds, maximum Etched stainless steel nameplate welded to body.  GP GQ GS QJ GW GV GX JW JA GZ MO MP  Alternate Electronic Output - specify zero and span output values Hastelloy C-276 Diaphragm and Thread Boron-Hardened diaphragm 0-10 Vdc FSO, Model 2xx only, (Requires 16-32 Vdc excitation) NaK Fill for 750°F max. applications NaK Fill with Inconel diaphragm and stemfor 1000°F max. applications Silicone Oil Fill. (Increases Thermal Shift) Consult factory Mineral Oil Fill. (Increases Thermal Shift) Consult factory Titanium Nitride-Coated Diaphragm & Threads 100 ohm RTD., 3 - wire, provided with no external cal. & 8 - pin standard connector Customer Special Gentran Wiring Barber-Colman Wiring  MODEL  130/131 230/231 330/331 230X/231X 330X/331X 330Z/331Z 3.33 mV/V 5 Vdc 4-20 mA 5 Vdc 4-20 mA 4-20 mA  RIGID STEM  GN GO HD HJ HT HU (BAR)  UV UX UY UZ VA VB VC VD VE 50 75 100 150 200 300 350 500 700 VF UA UH UB UC 750 1000 1400 1500 2000  PRESSURE RANGE (PSI)  RH RJ RK RM RO RR RS RT RV 500 600 750 1000 1500 2000 2500 3000 5000 RX RZ SB SD SF SZ 7500 10000 15000 20000 30000 Other  12.5  Rigid Stem 9  Rigid Stem 3  Rigid Stem 1 3/16  Rigid Stem 24  Rigid Stem 4  Rigid Stem  FLEX TUBING  GT HS HV HY MT 30  Armored Capillary Tube 9  Armored Capillary Tube 24  Armored Capillary Tube 12  Armored Capillary Tube Non-standard Armored Capillary Tube (50  max)  2770 Long Road, Grand Island, NY 14072 USA Tel. (716) 773-9300 Fax (716) 773-5019 E-mail:sales@gp50.com website:www.gp50.com  ",74);arrFiles[123]=new Array(124,"HTML/GP50-1211-1254-Indicator.pdf","26 Aug 2009","A5SL-1200.00 Rev A:Layout 1.qxd","","","Pressure, Level & Temperature Transmitters & Transducers  DIGITAL INDICATOR  Models 1211, 1254  MODEL 1211  FEATURES:  · 4 Digit LED Display · Thermocouple, RTD, mV, mA, V, and Resistance Inputs · Alarm Relay(s) · Zero/Tare and Max/Min Memory  MODEL 1254  FEATURES:  · 5 Digit LED Display ·  Fast-Cal  Calibration · Transducer Excitation Supply · Isolated Analog Input · Transducer Health  Test  Function · Dual Alarm Relays · Serial Communications  ORDERING GUIDE:  Use the following codes to identify desired item.  MODEL OUTPUT BUTTONS POWER DISPLAY  ORDERING GUIDE:  Use the following codes to identify desired item.  MODEL POWER DISPLAY          Example:1211-AB-B-1-R    Model 1211 Output A B C D E F Buttons N B Power 1 2 Display R G  Example:1254-1-R  1 Alarm Relay 2 Alarm Relays 3 Alarm Relays 1 Alarm Relay, 1 Analog Output (4-20mA) 2 Alarm Relays, 1 Analog Output (4-20mA) 3 Alarm Relays, 1 Analog Output (4-20mA) Blank Fascia Front Panel Push Buttons 90-250V AC Input 10-32V AC or DC Low Voltage Input Red Display Green Display  Model 1254 Power 1 Display R G  (2 Alarm Relays) 90-250V AC Input Red Display Green Display  FAST CAL OPERATION:  Automatically calibrates & matches the indicator to a pressure transducer. It records the output at zero pressure & then records the Span by activating the transducers internal calibration resistor. Transducer Test - Allows a fast & accurate method of checking the wiring, calibration, and health of the connected transducer. Additional - Display Hold, Alarm Acknowledge, Key board Lock.  A5SL-1200.00 Rev A  See reverse side for specifications. 2770 Long Road, Grand Island, NY 14072 USA Tel. (716) 773-9300 Fax (716) 773-5019 E-mail:sales@gp50.com website:www.gp50.com  Pressure, Level & Temperature Transmitters & Transducers  Specifications reflect standard product, improved performance/mechanical options available. Modifications may alter specs, consult factory for more information.  MODEL 1211  Display Type Range Update Rate A/D Converter Type 14.2mm high brightness red LED (green optional) 4 digit (-1999 tp 9999) 2 per second Display Type Range Update Rate Resolution Input ADC Type  MODEL 1254  14.2mm high brightness red LED (green optional) 5 digit (-19999 tp 99999) 2 per second User selectable  Dual slope intergrating with auto zero Conversion Rate 100 mS Common Mode Rejection >150dB Series Mode Rejection >70dB J, K, T, N, S, R 1°C after 30 minutes Upscale °C or °F 1 or 0.1°C (°F) Pt100 (alpha = 385) Pt100 (alpha = 392) 3 wire °C or °F 1 or 0.1° C (°F) ±20mA, ±100mV, ±10VDC Any portion of the display range 0.05% at 25°C typical < 5 Ohms (mA), > 100 MOhms (mV) > 100 MOhms (V) 4 to 20mA 22mA 0.2% at 25° C typical 500 Ohms 0.02mA  Thermocouple Inputs Type CJC Accuracy Open Circuit Detection Engineering Units Resolution RTD Type Configuration Excitation Units Resolution Voltage & Current Inputs Ranges Scaling Accuracy Impedance  Dual slope integrating auto zero, 17 bit (universal for mV, mA, V) Resolution Up to 1 microV per display digit (mV input) Accuracy 0.05% of reading Measurement Rate 10 per second Input Impedance >100MOhms (mV inputs) Common Mode Rejection >150dB Series Mode Rejection >70dB Transducer Supply Excitation User selectable regulated 0-12VDC at 35mA Loop power 24VDC nominal (35mA max) Alarm Relays Relays 2 off, single change over contacts Rating 1 Amp at 250VAC, 5 Amp at 30VDC Analog Output Isolation Output 500VDC / Peak AC User selectable 0 to 10VDC, 0 to 20mA, or 4 to 20mA User Scaling to any displayable value 0.2% at 25°C typical 100ms 0.05% (5mV or 0.01mA) 11V at 22mA 22mA at 18V 900 Ohms  Analog Output (Option) Output Maximum Output Accuracy Maximum Load Resolution  Scaling Accuracy Response Resolution Max. Voltage Output Max. Current Output Max. Load  Alarm Relays (Relays 2 & 3 are optional) Relays 1 & 2 Change over contacts Relays 3 Normally open contacts Rating 1 Amp at 250 VAC, 5 Amp at 30 VDC Physical / Mechanical Front Panel Dimensions (mm) Weight Environmental Temperature Humidity Protection to IP65 48(H) x 96(W) X 100(D) 0.4Kg  10 to 50°C operating, -10 to 70°C storage 0-95% RH non condensing  Serial Communications Type: RS 422/485, 2 or 4 wire multidrop Isolation: 500Vdc/Peak ac Speed: 1200, 2400, 4800, 9600 baud Parity: Odd, even or none Stop bits: 1 or 2 Protocols:MODBUSTM RTU (J-BUS), MODBUSTM ASCII and DTPL Physical / Mechanical Dimensions (mm) 48(H) x 96(W) X 100(D) Weight 0.4Kg Environmental Temperature Humidity Alarms Display 10 to 50°C operating, -10 to 70°C storage 0-95% RH non condensing Alarms can be flashed on the display with the measured value. 4 menus, each individually user selectable.  Menus  2770 Long Road, Grand Island, NY 14072 USA Tel. (716) 773-9300 Fax (716) 773-5019 E-mail:sales@gp50.com website:www.gp50.com  ",59);arrFiles[124]=new Array(125,"HTML/GP50-Rupture-Disk-Order.php","","GP50 Rupture Disk Ordering","","","Untitled Page Untitled Page West Coast Plastics Equipment, Inc. (800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com Home Login Contact Us Cart Logout Search Your GP:50 Rupture Disk part number is -- with a price of 0.00 . Units ship in 1-3 Days, FOB: Grand Island, NY. To order this item, please enter the quantity you need and press the Add to Cart button. Untitled Page About WCPE/Contact Info | Terms &amp; Conditions | Request Catalog | Business Hours M-F 8-5PST For Packaging Equipment &amp; Bag Sealers see our WCPSealers.com website! ",7);