West Coast Plastics Equipment, Inc.
(800) 392-8569 - Fax (310) 837-4947 - sales@westcoastplastics.com
Home Login Contact Us Cart Logout
PARTLOW MRC 5000 CHART RECORDERS
1 & 2 Pen Digital Circle Chart Recorders

The Partlow MRC 5000 is a 10” circular chart recorder that was designed with simplicity and functionality in mind. The operation of this chart recorder is so easy that all of its instructions fit on one 4” X 6” card.

The Partlow MRC 5000 is capable of measuring, recording, and controlling up to two process variables from a variety of inputs. It comes in two basic versions for trend recording – one or two pens.

The straightforwardness of these circular chart recorders is immediately evident just by looking at the unit’s face. The operator interface, a four-digit display with three-button keypad, is made for simple daily operation and easy configuration. A clear prompting scheme provides rapid access to all configuration and operation data.

The operator interface also provides access to test and calibration facilities with a convenient dual function MODE switch. As if configuring the Partlow MRC 5000 wasn’t easy enough, there’s also an optional Configurator port for ultimate programming ease. Using the optional PC program, parameters can be modified, saved, and downloaded in seconds.

A quick look inside the casing and at the chart itself also speaks to the straightforward, functional design of the Partlow MRC 5000 circular chart recorders. You will find just one jumper to configure each port. The two pens, each with configurable spans, are positioned smoothly without any slidewire feedback; this simplifies design and improves reliability. In addition, the 10” chart rotates at the speeds you select.

Finding a place to install this circular chart recorder is easy, with its compact 2.5” panel depth and short 1.3” protrusion from the front panel. And, don’t worry about harsh environments – the Partlow MRC 5000 comes standard with a NEMA 3 rating.

Applications - The Partlow MRC 5000 circular chart recorder is ideal for basic digital recording applications with shallow depth panel requirements.

  • Process validation
  • Trend analysis
  • Regulatory compliance
  • Product safety
Industries - Oven, chamber, furnaces, heat treating, food processing, harsh water environments.

Quick Specs
  • Up to two process or limit alarms for each pen
  • Optional Digital Communications package allows user to access process values, alarm conditions, and other data
  • Optional configurator port allows for the use of a PC to modify, save, or download programming parameters
  • Setup/Calibration seal protects the unit against unauthorized changes
  • Universal inputs and power supply
  • Standard NEMA 3 (NEMA 4X optional) protects the unit against harsh environments
  • Agency approvals: UL, C-UL, CE and FM (pending)

Download Partlow MRC 5000 Chart Recorder spec sheet (pdf format)

Download Partlow MRC 5000 Chart Recorder user manual (pdf format)
Partlow MRC5000 2 Pen Circle Chart Recorder.
How to Order Partlow MRC5000 Chart Recorders

When placing an order, build the desired model number using this model number guide (below).
Select the configuration in the ordering table and then hit the "Submit" button at the bottom of the page.
Custom Ordering - Partlow MRC 5000 Chart Recorders
5 ____ ____ ____ ____ ____ ____ ____ __ __
1 2 3 4 5 6 7 8 9
1. Model Price
5 = MRC 5000 Chart Recorder/Controller
$730.80

2. Pen 1 Option
1 = Recorder Only
N/C
2 = Recorder Controller - does not include a relay. Order relays in output options
$18.00
3 = High/Low Limit - Factory Mutual approved
$18.00

3. Pen 2 Option
0 = None
N/C
1 = Recorder Only
$240.30
2 = Recording Controller - does not include a relay. Order relays in output options.
$252.00
3 = High/Low Limit - Factory Mutual approved.
$252.00

4. Pen 1 Outputs
0 = None
N/C
1 = One Relay
$77.40
2 = Two Relays
$139.50

5. Pen 2 Outputs
0 = None
N/C
1 = One Relay
$77.40
2 = Two Relays
$139.50

6. Communication Option
0 = Recorder Only
N/C
1 = Configurator Port
$10.80
2 = RS-485
$74.70
3 = Configurator Port and RS-485
$83.70

7. Enclosure Options
1 = Standard - NEMA 3 N/C
2 = Door Lock $74.70
3 = NEMA 4X $74.70

8. Operating Voltage
1 = Standard - 90 to 240 VAC
N/C
3 = Transmitter Power Supply 24 VDC
$83.70
5 = CE & Standard Voltage
$23.40
7 = CE & Standard Voltage & Transmitter Power Supply
$107.10

9. Suffix
Blank = None
N/C
AA = Alarms & Communications Connectivity Option (Allows for later field installation of both options)
$32.40

Some configurations ship in 1-2 days, other in approx. 2 weeks. All items FOB: Factory, Vermont.
This page last modified on 7/30/2009
Untitled Page
About WCPE/Contact Info | Terms & Conditions | Request Catalog | Business Hours M-F 8-5PST
For Packaging Equipment & Bag Sealers see our WCPSealers.com website!